Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Upper-bound modelization of an ironed three-layered polymer-coated steel strip

  • Sellés, M.A.|||0000-0002-0784-5757
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Pérez Bernabeu, Elena|||0000-0002-9221-7623
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Schmid, S.R.
[EN] Global beverage can and food container consumption is very high, with billions of cans produced annually worldwide. There are several steps in can manufacturing, but ironing is the most crucial. In a previous work (Sellés et al., J Mater Process Technol 202:7-14, 2008), a series of ironing experiments were reported using a new material and an ironing simulator. This material was a three-layered polymer-coated steel, and it was seen that under some process conditions, it survived the ironing process with no damage in any of the three layers. The critical die angle was determined as well as specimen quality surface tests. In this paper, an associated theoretical ironing model is described, using the upper-bound theorem and considering the cases of successful ironing or shaving. It is possible to give insight into how to design a material that irons well. For example, the optimal layer thicknesses are also found., The authors wish to thank Mittal Steel for financial support and for providing all required materials. Authors also thank the support of Universitat Politècnica de València [grant number PAID-06-10-003-305].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nuevos aceros TWIP/TRIP en los automóviles del futuro, New steels TWIP/TRIP in future automobiles

  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Sellés, M.A.|||0000-0002-0784-5757
  • Pla-Ferrando, R|||0000-0001-6688-9904
  • Peydro, M. A.|||0000-0002-8503-1505
[ES] El presente trabajo tiene por objeto introducir al lector en un grupo de materiales que prometen tener relevancia en la evolución de las estructuras de automóviles, y que probablemente cambien la forma de diseñar elementos resistentes. Se describen las propiedades más relevantes, Se justifican los beneficios medioambientales de su implantación. Finalmente se llega a las conclusiones que justifican su idoneidad para múltiples aplicaciones donde se requiera aumento de seguridad con disminución de peso., [EN] This paper aims to introduce the reader to a group of materials that promise to be relevant in the evolution of automotive structures, and probably change the way design elements resistant. It describes the most relevant properties. It justifies the environmental benefits of its implementation. Finally, conclusions are justifying their suitability for multiple applications requiring enhanced security with reduced weight., Este trabajo forma parte de un proyecto subvencionado por la Universitat Politècnica de València (PAID-06-10-003-305).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelization of three-layered polymer coated steel-strip ironing process using a neural network

  • Sellés, M.A.|||0000-0002-0784-5757
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Segui Llinares, Vicente Jesús|||0000-0002-4043-2866
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Pla-Ferrando, R|||0000-0001-6688-9904
  • Schmid, Steven
[EN] An alternative to the traditional can manufacturing process is to use plastic laminated rolled steels as base stocks. This material consist of pre-heated steel coils that are sandwiched between one or two sheets of polymer. The heated sheets are then immediately quenched, which yields a strong bond between the layers. Such polymer-coated steels were investigated by Jaworski [1,2] and Sellés [3], and found to be suitable for ironing with carefully controlled conditions. A novel multi-layer polymer coated steel has been developed for container applications. This material presents an interesting extension to previous research on polymer laminated steel in ironing, and offers several advantages over the previous material (Sellés [3]). This document shows a modelization for the ironing process (the most crucial step in can manufacturing) done by using a neural network, This work was supported by the “Universitat Politècnica de València” [grant number PAID-06-10-003-305]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Theoretical model of a multi-layered polymer coated steel-strip ironing process using a neural network

  • Sellés, M.A.|||0000-0002-0784-5757
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Pérez Bernabeu, Elena|||0000-0002-9221-7623
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Segui Llinares, Vicente Jesús|||0000-0002-4043-2866
  • Schmid, S. R.
An alternative to the traditional can manufacturing process is to use plastic laminated rolled steels as base stocks. This material consist of pre-heated steel coils that are sandwiched between one or two sheets of polymer. The heated sheets are then immediately quenched, which yields a strong bond between the layers. Such polymer-coated steels were investigated by Jaworski [1,2] and Sellés [3], and found to be suitable for ironing with carefully controlled conditions. A novel multi-layer polymer coated steel has been developed for container applications. This material presents an interesting extension to previous research on polymer laminated steel in ironing, and offers several advantages over the previous material (Sellés [3]). This document shows a modelization for the ironing process (the most crucial step in can manufacturing) done by using a neural network. © (2012) Trans Tech Publications., This work was supported by the “Universitat Politècnica de València” [grant number PAID-06-10-003-305]