Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Double-template fabrication of three-dimensional porous nickel electrodes for hydrogen evolution reaction

  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Vázquez-Gómez, Lourdes
[EN] Three-dimensional (3D) porous nickel structures were fabricated via a double-template electrochemical deposition process. The construction of the foam structures was achieved by means of a hydrogen bubble dynamic template, prepared from Cu electrodeposition at high current densities. Subsequently, a Ni layer was electrodeposited on the Cu 3D template. During the nickel coating, the typical finger-like microstructure of the Cu foam becomes denser and changes to a cauliflower microstructure. The hydrogen evolution reaction (HER) on these macroporous Ni electrodes was evaluated in 30 wt.% KOH solution by means of polarization curves and electrochemical impedance spectroscopy (EIS). Results demonstrate greater apparent activity of the developed electrodes towards HER in comparison with commercial smooth Ni electrode. The 3D porous Ni electrocatalyst obtained from Cu templates synthesized at the lowest current density and the highest electrodeposition time yielded the best electrochemical activity for HER. © 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved., Isaac Herraiz-Cardona is grateful to the Ministerio de Educacion (Spain) for a postgraduate grant (Ref. AP2007-03737). This work was supported by Generalitat Valenciana (PROMETEO/2010/023) and Universidad Politecnica de Valencia (PAID-06-10-2227).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Co-modification of Ni-based type Raney electrodeposits for hydrogen evolution reaction in alkaline media

  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • González Buch, Cristina
  • Valero Vidal, Carlos
[EN] In this work, high performance Ni and Ni-Co porous electrodes are prepared using the Raney strategy by galvanic co-deposition for hydrogen evolution reaction (HER) in alkaline solution (KOH 30 wt.%). The incorporation of Co into the Raney Ni matrix causes a surface morphology modification, from cracked to "cauliflower-like", which dominates the superficial structure of the Co-richest obtained material. The evaluation of these electrodes as H-2-evolving cathodes is done through pseudo-steady-state polarization curves and electrochemical impedance spectroscopy (EIS). Ni Raney electrode (without Co) manifests the highest apparent catalytic activity per unit of geometric surface area, which is attributed to the higher surface roughness factor, determined by EIS. HER on the investigated electrocatalysts proceeds via the Volmer-Heyrovsky mechanism, with Heyrovsky as the rate-determining step (rds). From the kinetic parameters it is derived that Co presence, in a composition range of 5-22 at.%, increases the intrinsic catalytic activity of the developed cathodes per unit of true surface area, as a consequence of the synergism between the properties of Ni and of Co. Nevertheless, this improvement does not compensate the lower surface roughness factor, originated by the surface morphology modification as the Co content increases, reporting lower apparent catalytic activities. (C) 2013 Elsevier B.V. All rights reserved., Isaac Herraiz-Cardona is grateful to Fundacion Iberdrola for the economical support by means of the Project: "Desarrollo y caracterizacion de materiales electrodicos porosos estables para la produccion de hidrogeno a partir de la electrolisis alcalina del agua" - II Convocatoria de Ayudas a la Investigacion en Energia y Medio Ambiente. The authors would like to thank the financial support from Generalitat Valenciana (PROMETEO/2010/023) and Universidad Politecnica de Valencia (PAID-06-10-2227).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the catalytic activity of 3D macroporous Ni and NiMo cathodes for hydrogen production by alkaline water electrolysis

  • González Buch, Cristina
  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
Platinum is the electrode material with the highest catalytic activity for the hydrogen evolution reaction (HER). However, its high cost and scarcity are the two major barriers for its usage in the industrial alkaline water electrolysis, which requires searching for other cheaper and more available materials with good catalytic activity. Ni based materials have attracted more and more attention due to their good activity for the HER and sufficient corrosion resistance in alkaline solutions at considerable low cost. According to the Brewer intermetallic bonding theory, molybdenum alloyed with nickel (hypo hyper-d-electronic transition metal) could improve the intrinsic catalytic activity for the HER. In this work, Ni and NiMo metallic coatings were galvanostatically electrodeposited on a stainless steel AISI 304 substrate by means of the double template electrochemical process. The evaluation of these electrodes as H2-evolving cathodes was done in 30 % wt. KOH by pseudo-steady-state polarization curves and electrochemical impedance spectroscopy (EIS) at different temperatures. From Tafel curves results, it is shown that the NiMo electrodes have higher catalytic activity than Ni. On the other hand, from EIS results, it is possible to conclude that the NiMo electrodes showed higher intrinsic catalytic activity for HER than the pure Ni electrode as a consequence of alloying hypo hyper-d-electronic transition metals., The authors acknowledge the support of Generalitat Valenciana (PROMETEO/2010/023) and Universidad Politecnica de Valencia (PAID-06-10-2227). We wish to thank the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Energy Efficiency Improvement of Alkaline Water Electrolysis by using 3D Ni Cathodes Fabricated via a Double-Template Electrochemical Process

  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • González Buch, Cristina
[EN] Alkaline water electrolysis is one of the easiest methods for hydrogen production, offering the advantage of simplicity. Moreover, it represents an environmentally friendly technology for production of high purity hydrogen. Nevertheless, the elevated production costs due to low conversion efficiency and electrical power expenses can be named as the main drawbacks of electrochemical hydrogen production. This work is focused on the development and characterization of 3D porous Ni cathodes for alkaline electrolyzers. The electrodes were synthesized by nickel electrodeposition on copper foams obtained from hydrogen bubbles dynamic templates (double-template electrochemical process). The developed electrodes were characterized by SEM, confocal laser scanning microscopy, and EDX. The electrocatalytic performance of the developed electrodes for hydrogen evolution reaction (HER) was evaluated in 30 wt.% KOH solution by using hydrogen discharge curves and galvanostatic tests. Results show that the use of the developed electrodes as cathodes in electrolysis systems makes possible an energy saving of ca. 25% in conditions at which industrial alkaline water electrolysis is carried out, in comparison with the smooth commercial Ni electrodes., I. Herraiz-Cardona is grateful to Fundación Iberdrola for the financial support. This work was supported by Generalitat Valenciana (Project PROMETEO/2010/023) and Universitat Politècnica de València (PAID-06-10-2227).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of macroporous Ni, Co and NieCo electrocatalytic deposits for hydrogen evolution reaction in alkaline media

  • González Buch, Cristina
  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
In this work, macroporous Ni, Co and NieCo electrodes have been developed by codeposition at high current density on stainless steel (AISI 304) substrates. The obtained materials were characterized both morphologically and chemically by confocal laser scanning microscopy, and SEM coupled with EDX analysis. The activity for hydrogen evolution reaction (HER) on the obtained layers was assessed by using pseudo-steady-state polarization curves and electrochemical impedance spectroscopy (EIS) in alkaline solution (30 wt.% KOH). The electrochemical results show that HER on these electrodes takes place by the VolmereHeyrovsky mechanism. The synthesized coatings present higher catalytic activity for HER than commercial smooth Ni electrode. As the Co content increases in the electrodeposition bath the obtained structures show lower surface roughness factors. Ni eCo deposit with a Co content of 43 at.% manifests the highest intrinsic activity for HER as a consequence of the synergetic combination of Ni and Co., The authors acknowledge the support of Generalitat Valenciana (PROMETEO/2010/023) and Universidad Politecnica de Valencia (PAID-06-10-2227). I. Herraiz-Cardona is grateful to Fundacion Iberdrola for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of Ni-Mo, Ni-W and Ni-Co Macroporous Materials for Hydrogen Evolution Reaction

  • González Buch, Cristina
  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] The hydrogen evolution reaction (HER) is the cathodic process in many important electrochemical technologies. According to the Brewer intermetallyc bonding theory, molybdenum and tungsten were alloyed with nickel (hypo-hyper-d- electronic transition metal) in order to increase the intrinsic catalytic activity for HER. Cobalt was also combined with nickel to evaluate the effect of this metal in the intrinsic catalytic activity. In all the cases, electrodeposition at very high current densities provided macroporous materials of quasy-cylindrical pores due to the fact that the metallic deposition takes place simultaneously to the gas bubbling at high current densities. Morphology of the developed electrodes was characterized by confocal laser scanning microscopy, and HER on these electrodes was evaluated in 30 wt.% KOH solution by means of steady-state polarization curves and electrochemical impedance spectroscopy (EIS). Results show that the developed materials manifest higher apparent catalytic activity than that reported for a smooth commercial polycrystalline nickel electrode., This work was supported by Generalitat Valenciana (Project PROMETEO/2010/023) and Universitat Politècnica de València (PAID-06-10-2227). I. Herraiz-Cardona is grateful to Fundación Iberdrola for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of Au-modified macroporous Ni electrocatalysts for alkaline water electrolysis

  • González Buch, Cristina
  • Mestre, Sergio
  • Herraiz Cardona, Isaac|||0000-0001-5829-6594
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
Au nanoparticles (Au-NPs) were successfully synthesized and incorporated into the surface of a macroporous Ni electrode fabricated via galvanostatic electrodeposition at high current densities in order to produce hydrogen by means of alkaline water electrolysis. The developed electrodes were morphologically characterized by means of confocal laser scanning and field emission scanning electron microscopes. The electrocatalytic behaviour towards the hydrogen evolution reaction was studied by Tafel polarization curves and electrochemical impedance spectroscopy. It was clear that enlarging the real surface area of an electrode its catalytic activity was greatly enhanced. This improvement was further increased when Au-NPs were added to the macroporous Ni surface. In this case, the improvement was not only caused by enlarging the surface area but also by an improvement in the intrinsic catalytic activity of the alloy, as it was shown by the exchange current densities values, calculated from the real surface area., The authors acknowledge the support of Generalitat Valenciana (PROMETEO/2010/023) and Universidad Politecnica de Valencia (PAID-06-10-2227).