Pasar al contenido principal

TECHNO-ECONOMICAL EVALUATION OF DIFFERENT THERMAL ENERGY STORAGE CONCEPTS FOR CSP PLANTS

PCI2020-120682-2

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Techno-economic analysis of a concrete storage concept for parabolic trough solar power plants

  • Prieto, Cristina
  • Pino, Francisco Javier
  • Cabeza, Luisa F.
In an energy transition towards 100 % renewable electricity, concentrating solar power (CSP) with thermal energy storage (TES) should be deployed on a wide scale due to the dispatchability capacity of this technology. To achieve this, a decrease of its levelized cost of electricity (LCOE) is essential. This paper evaluates the technoeconomic potential of a CSP plant with high temperature concrete as TES system compared to the standard commercial molten salts system. The general plant design includes creating a bank of metal tubes enclosed by concrete in a modular configuration, aiming to maximize the performance of the plant (e.g., reducing parasitics). Nevertheless, the results proved that the selected configuration underperforms during the discharge phase in nominal conditions. Despite existing expectations, this study shows the prevalence of the current molten salt TES system as a better solution over the high temperature optimized concrete configuration studied.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Characterization of Supplementary Cementitious Materials and Fibers to be Implemented in High Temperature Concretes for Thermal Energy Storage (TES) Application

  • Boquera, Laura
  • Pons, David
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
Six supplementary cementitious materials (SCMs) were identified to be incorporated in concrete exposed to high-temperature cycling conditions within the thermal energy storage literature. The selected SCMs are bauxite, chamotte, ground granulated blast furnace slag, iron silicate, silica fume, and steel slag. A microstructural characterization was carried out through an optical microscope, X-ray diffraction analysis, and FT-IR. Also, a pozzolanic test was performed to study the reaction of SCMs silico-aluminous components. The formation of calcium silica hydrate was observed in all SCMs pozzolanic test. Steel slag, iron silicate, and ground granulated blast furnace slag required further milling to enhance cement reaction. Moreover, the tensile strength of three fibers (polypropylene, steel, and glass fibers) was tested after exposure to an alkalinity environment at ambient temperature during one and three months. Results show an alkaline environment entails a tensile strength decrease in polypropylene and steel fibers, leading to corrosion in the later ones., Funding This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE and RTI2018-093849-B-C32—MCIU/AEI/FEDER) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. This study was partially funded by AEI—Spanish Ministry of Science, Innovation and Universities (PCI2020-120695-2/AEI/10.13039/501100011033 and PCI2020-120682-2/AEI/10.13039/501100011033 through PCI call). Acknowledgments The authors would like to thank the Catalan Government for the quality accreditation given to their research groups (2017 SGR 1537 and 2017 SGR 118). GREiA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. The authors also thank the companies that provided the material to make possible this experimental research: Gestión Medioambiental de Neumáticos S.L., Arciresa, EDERSA—Masaveu Industria and Promsa—Megasa.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Characterization of Supplementary Cementitious Materials and Fibers to be Implemented in High Temperature Concretes for Thermal Energy Storage (TES) Application

  • Boquera, Laura
  • Pons, David
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
Six supplementary cementitious materials (SCMs) were identified to be incorporated in concrete exposed to high-temperature cycling conditions within the thermal energy storage literature. The selected SCMs are bauxite, chamotte, ground granulated blast furnace slag, iron silicate, silica fume, and steel slag. A microstructural characterization was carried out through an optical microscope, X-ray diffraction analysis, and FT-IR. Also, a pozzolanic test was performed to study the reaction of SCMs silico-aluminous components. The formation of calcium silica hydrate was observed in all SCMs pozzolanic test. Steel slag, iron silicate, and ground granulated blast furnace slag required further milling to enhance cement reaction. Moreover, the tensile strength of three fibers (polypropylene, steel, and glass fibers) was tested after exposure to an alkalinity environment at ambient temperature during one and three months. Results show an alkaline environment entails a tensile strength decrease in polypropylene and steel fibers, leading to corrosion in the later ones., Funding This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31—MCIU/AEI/FEDER, UE and RTI2018-093849-B-C32—MCIU/AEI/FEDER) and by the Ministerio de Ciencia, Innovación y Universidades—Agencia Estatal de Investigación (AEI) (RED2018-102431-T). This work is partially supported by ICREA under the ICREA Academia programme. This study was partially funded by AEI—Spanish Ministry of Science, Innovation and Universities (PCI2020-120695-2/AEI/10.13039/501100011033 and PCI2020-120682-2/AEI/10.13039/501100011033 through PCI call). Acknowledgments The authors would like to thank the Catalan Government for the quality accreditation given to their research groups (2017 SGR 1537 and 2017 SGR 118). GREiA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. The authors also thank the companies that provided the material to make possible this experimental research: Gestión Medioambiental de Neumáticos S.L., Arciresa, EDERSA—Masaveu Industria and Promsa—Megasa.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Techno-economic analysis of a concrete storage concept for parabolic trough solar power plants

  • Prieto, Cristina
  • Pino, Francisco Javier
  • Cabeza, Luisa F.
In an energy transition towards 100 % renewable electricity, concentrating solar power (CSP) with thermal energy storage (TES) should be deployed on a wide scale due to the dispatchability capacity of this technology. To achieve this, a decrease of its levelized cost of electricity (LCOE) is essential. This paper evaluates the technoeconomic potential of a CSP plant with high temperature concrete as TES system compared to the standard commercial molten salts system. The general plant design includes creating a bank of metal tubes enclosed by concrete in a modular configuration, aiming to maximize the performance of the plant (e.g., reducing parasitics). Nevertheless, the results proved that the selected configuration underperforms during the discharge phase in nominal conditions. Despite existing expectations, this study shows the prevalence of the current molten salt TES system as a better solution over the high temperature optimized concrete configuration studied.