Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unravelling the multi-scale structure of cell walls from edible seaweed species and the impact of processing treatments

  • Vega Gómez, Laura M.
  • Torrego Moreno, Elena
  • Cebrián Lloret, Vera
  • Castanedo, María
  • Martínez, Juan Carlos
  • Recio, Isidra
  • Martínez Sanz, Marta
Data will be made available on request., A sequential protocol combining solvent and mechanical treatments, originally designed for land plants, was adapted to concentrate the cell walls of two edible seaweed species, Ulva lacinulata and Porphyra dioica (Nori). However, complete isolation of the cell walls without altering their natural structure was challenging due to strong interactions between polysaccharides and other components, such as proteins. Instead, the process concentrated the cell walls, resulting in polysaccharide contents of 61–63 %. In Ulva, cellulose was identified as the main structural component, while in Nori, porphyrans constituted the semi-crystalline, microfibrillar backbone, closely resembling cellulose in arrangement. These structural variations affected how the cell walls responded to mechanical (ultrasounds, US) and thermal (steam cooking) treatments, as evidenced by the advanced structural characterisation of the samples, combining Small Angle X-ray Scattering (SAXS) and X-ray diffraction (XRD) with microscopy and monosaccharide analyses. In Ulva, steam cooking preserved cell wall integrity while releasing intracellular components, whereas US disrupted the crystalline cellulose structure, causing significant cell wall breakdown and the release of proteins and polysaccharides. For Nori, steam cooking promoted protein release and the migration of some polysaccharides into the extracellular matrix, while US altered the crystalline structure of porphyrans but preserved cellular integrity due to the dense, gel-like extracellular matrix. These results highlight the importance of the composition and structure of the cell wall in seaweeds in determining their mechanical integrity and transformation responses., This work was financially supported by the grant TED2021-129711B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR and by the grant PCI2024-153420, funded by MICIU/AEI/10.13039/501100011033 and by the European Union. Laura María Vega Gómez was supported by a predoctoral fellowship funded by the Consejeria de Educación Ciencia y Universidades from the Comunidad de Madrid (PIPF-2023/BIO-29516). Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2024108915)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comprehensive review of the digestibility of novel alternative protein sources: Current status and challenges

  • Göksen, Gülden
  • Karabulut, Gulsah
  • Keklik, Mehtap
  • Martínez Sanz, Marta
Data will be made available on request., As the global population continues to rise, the need for sustainable protein sources becomes critical. Traditional animal-based proteins pose environmental concerns, contributing to high carbon emissions, and overconsumption can lead to health issues. Alternative proteins, including plant-based, cultured meats, insects, algae, and microbial proteins, offer promising solutions; however, knowledge of their digestibility is limited, and the reported documents are often quite low. For instance, plant proteins contain anti-nutritional factors like phytic acid and trypsin inhibitors, which hinder absorption. Similarly, insects, algae, and microbial proteins have complex cellular structures or compounds that can interfere with protein breakdown and absorption. On the other hand, cultured meats may lack certain components critical for optimal digestion. Thus, novel and conventional processing methods are being studied to improve digestibility. In this context, continued research is essential to refine these techniques for different protein sources, ensuring a sustainable production of alternative proteins with high nutritional quality., This study was supported by Scientific and Technological Research Council of Turkey (TUBITAK) under the Grant Number 124N076. The authors thank to TUBITAK for their supports. Gulden Goksen sincerely acknowledges TUBITAK for financial support from the under BIDEB-2218 National Postdoctoral Research Scholarship Programme with the Grant Number of 122C056. This research work was also supported by the grant PCI2024-153420, funded by MCIN/AEI/10.13039/501100011033 and co-funded by the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparative compositional and microstructural profiling of wild, off shore and inland cultivated European seaweeds for food applications

  • Ferreiro, Tania
  • Cebrián Lloret, Vera
  • Cobos-Malpensa, Inés
  • Garrido-Bañuelos, Gonzalo
  • Rivas-Cascallar, Mercedes
  • Olmo, Gonzalo de
  • Martínez Sanz, Marta
  • López-Sánchez, Patricia
16 pages, 5 tables, 5 figures.-- Data will be made available on request, Scientific knowledge of the composition and microstructure of European seaweeds remains limited. This study comprehensively characterises ten industrially relevant species of red, brown, and green algae from wild and cultivated sources across the Atlantic Ocean, North Sea, Mediterranean Sea, and Baltic Sea. Analyses included proximate composition, amino acids, minerals, and microstructure. Protein content varied, with the highest levels (∼17% dw) found in the red algae Furcellaria lumbricalis and Gracilaria bursa-pastoris. Non-essential amino acids were dominated by glutamic acid, aspartic acid, alanine, and glycine, while red algae showed the highest proportion of essential amino acids. Fibre content (∼24–62% dw) and ash (∼11%–41% dw) ranged widely, fat levels were low (1–3.8% dw). Microscopy revealed interspecies differences in extracellular matrix and cellular characteristics, observable even without fluorescence staining. F. lumbricalis showed potential for iron enrichment, while iodine concentrations showed substantial variability (∼9–620 mg kg⁻¹ dw), indicating the need for species-specific dietary recommendations. In our sample set a positive correlation was identified between fibre and extracellular matrix thickness. Multivariate analysis highlighted strong relationships among ash, dietary fibre, and calcium. Overall, the findings demonstrate large nutritional and structural diversity among European seaweeds, supporting their targeted use for food and biotechnological applications, The research leading to these results was supported by projects PCI2024–720153421 and PCI2024–153420, funded by MCIN/AEI/10.13039/501100011033 and co-funded by the European Union, project PID2022–721138328OB-C22 (Ministerio de Ciencia e Innovación, Spain), and project PBA/SBEP/24/03 funded by Marine Institute in Ireland and co-funded by the European Union, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of polysaccharide composition and cell wall structure on the production of protein-rich extracts from different Nori species Author links open overlay panel

  • Vega Gómez, Laura M.
  • Cebrián Lloret, Vera
  • Correa, Yubexi
  • Sánchez-Baca, Alejandro
  • Villamiel, Mar
  • Recio, Isidra
  • Martínez Sanz, Marta
Data will be made available on request., The potential of two red seaweeds known as Nori, Porphyra dioica (PD) and Pyropia columbina (PC), for the recovery of protein-rich fractions, was evaluated. Both seaweeds exhibited high protein (27% PD, 21% PC) and polysaccharide (55% PD, 47% PC) contents. Porphyrans were the main carbohydrates; however, galactose was higher in PC, while PD was richer in 6-O-methyl-d-galactose. Ultrasound (US) and steaming (ST) were tested as pre-treatments to weaken cell walls and facilitate protein extraction. A 5-min US treatment disrupted the polysaccharide matrix and enhanced protein solubilization, while ST caused protein loss in the cooking liquid. Due to its xylan-richer cell walls, PD showed lower extraction yields (up to 31%) compared to PC (41%). The optimum extracts reached 39% protein (PD) and 38% (PC), with 29–32% essential amino acids, comparable to conventional sources such as soy and pea. These results highlight the influence of polysaccharide composition and cell wall structure on the recovery of protein-rich fractions from both species., This work was funded by the European Union (ERC, PRODIGEST, ERC-2022-COG 101086483) the grant TED2021-129711B-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR, and the grant PCI2024-153420, funded by MICIU/AEI/10.13039/501100011033 and by the European Union. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council Executive Agency. Laura María Vega Gómez was supported by a predoctoral fellowship funded by the Consejeria de Educación Ciencia y Universidades from the Comunidad de Madrid (PIPF-2023/BIO-29516). Synchrotron experiments were performed at NCD beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2024028163). Figures were created with BioRender.com., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From seaweed biorefinery residues to functional films: how H2O2/UV-assisted pigment removal reshapes polymer networks and material performance

  • Bojorges, Hylenne
  • Correa, Yubexi
  • Martínez Sanz, Marta
  • López-Rubio, Amparo
  • Fabra, María José
Seaweed biorefinery residues are often regarded as cellulose-rich side streams; however, their conversion into functional films depends on how extraction and post-treatment steps preserve the residual polymer matrix. This study evaluated H<inf>2</inf>O<inf>2</inf>/UV-assisted pigment removal as both an optical-upgrading strategy and a matrix-modifying treatment for residue-based films. Solid residues remaining after furcellaran extraction from Furcellaria lumbricalis, alginate extraction from Saccharina latissima, and protein extraction from Ulva lactuca were processed by extrusion and hot pressing before and after pigment removal. The materials were characterized through compositional, spectroscopic, morphological, scattering, thermal, optical, mechanical, water-affinity, and barrier analyses. All untreated residues formed self-supporting films, but performance was strongly residue-specific. Furcellaria lumbricalis residues yielded the most cohesive films, with the highest tensile strength (8.0 ± 0.5 MPa), lowest water vapor permeability (2.4 ± 0.1 × 10<sup>−13</sup> kg m·Pa<sup>−1</sup>·s<sup>−1</sup>·m<sup>−2</sup>), low water uptake (12.1 ± 1.2%), and effective light shielding. Saccharina latissima residues produced more extensible but weaker films, whereas Ulva lactuca films showed higher water affinity and permeability. Pigment removal improved whiteness, but its functional impact depended on matrix architecture. Treated Saccharina latissima failed to form a continuous film, while treated Ulva lactuca showed the highest permeability and water uptake. These findings indicate that H<inf>2</inf>O<inf>2</inf>/UV-assisted pigment removal should not be regarded only as an optical treatment, since its impact depends strongly on the organization and composition of the residual polymer matrix: when cohesive protein-polysaccharide domains were preserved, film integrity and water resistance were maintained; when these domains were depleted, processability and barrier performance deteriorated. The results provide a structure-function basis for selecting seaweed biorefinery residues as sustainable film-forming matrices with packaging-relevant functionality., The authors acknowledge financial support from grants PID2022-138328OB-C21 and CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033 and the European Regional Development Fund (ERDF, "A way of making Europe"), as well as grant PCI2024-153420, funded by MICIU/AEI/10.13039/501100011033 and the European Union. This work was carried out within the framework of the SEAFOODTURE project (Proposal SBEP2023-39), funded by the Sustainable Blue Economy Partnership (SBEP) Joint Call 2023; ERANET Call 2023). The authors also acknowledge financial support from the EVOLVEPACK project, which contributes to the PRIMA Programme (Partnership for Research and Innovation in the Mediterranean Area), funded through the European Union's Horizon 2020 Framework Programme and national research funding agencies (PCI2024-153409)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data of manuscript From seaweed biorefinery residues to functional films: how H₂O₂/UV-assisted pigment removal reshapes polymer networks and material performance [DATASET]

  • Bojorges, Hylenne
  • Correa, Yubexi
  • Martínez Sanz, Marta
  • López-Rubio, Amparo
  • Fabra, María José
Seaweed biorefinery residues are often regarded as cellulose-rich side streams; however, their conversion into functional films depends on how extraction and post-treatment steps preserve the residual polymer matrix. This study evaluated H₂O₂/UV-assisted pigment removal as both an optical-upgrading strategy and a matrix-modifying treatment for residue-based films. Solid residues remaining after furcellaran extraction from Furcellaria lumbricalis, alginate extraction from Saccharina latissima, and protein extraction from Ulva lactuca were processed by extrusion and hot pressing before and after pigment removal. The materials were characterized through compositional, spectroscopic, morphological, scattering, thermal, optical, mechanical, water-affinity, and barrier analyses. All untreated residues formed self-supporting films, but performance was strongly residue-specific. Furcellaria lumbricalis residues yielded the most cohesive films, with the highest tensile strength (8.0 ± 0.5 MPa), lowest water vapor permeability (2.4 ± 0.1 × 10⁻¹³ kg·m·Pa⁻¹·s⁻¹·m⁻²), low water uptake (12.1 ± 1.2%), and effective light shielding. Saccharina latissima residues produced more extensible but weaker films, whereas Ulva lactuca films showed higher water affinity and permeability. Pigment removal improved whiteness, but its functional impact depended on matrix architecture. Treated Saccharina latissima failed to form a continuous film, while treated Ulva lactuca showed the highest permeability and water uptake. These findings indicate that H₂O₂/UV-assisted pigment removal should not be regarded only as an optical treatment, since its impact depends strongly on the organization and composition of the residual polymer matrix: when cohesive protein-polysaccharide domains were preserved, film integrity and water resistance were maintained; when these domains were depleted, processability and barrier performance deteriorated. The results provide a structure-function basis for selecting seaweed biorefinery residues as sustainable film-forming matrices with packaging-relevant functionality., Data collection was supported by Spanish national and regional funding (MCIN/AEI/10.13039/501100011033: PID2022-138328OB-C21, PCI2024-153420; European Union's: Sustainable Blue Economy Partnership (SBEP) SBEP2023-39, PRIMA Programme PCI2024-153409, and Severo Ochoa Centre of Excellence: CEX2021-001189-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed