Pasar al contenido principal

SINTESIS DE MATERIALES EN CONDICIONES FUERA DE EQUILIBRIO

PCIN-2017-098

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Ar+ ion bombardment dictates glycine adsorption on pyrite (1 0 0) surface: X-ray photoemission spectroscopy and DFT approach

  • Gálvez Martínez, Santos
  • Escamilla Roa, E.
  • Zorzano, María-Paz
  • Mateo Marti, Eva
Highlights Sulfur defects increase the selectivity of the adsorbed glycine species on pyrite. On a sputtered pyrite surface, the adsorption of the anionic form of glycine is favored. On a sputtered pyrite surface, glycine evolves from zwitterionic to anionic form. DFT calculations show that the atomic charge of Fe-vacancy atoms increases. DFT shows that the adsorption of zwitterionic glycine onto vacancies is exothermic., Ar+ ion sputtering on pyrite surfaces leads to the generation of sulfur vacancies and metallic iron. Our research shows that sputtering and annealing processes drive electrostatic changes on the pyrite surface, which play an important role in the molecular adsorption of glycine. While both chemical species (anion and zwitterion) adsorb on a sputtered pyrite surface, the anionic form of glycine is favoured. Nevertheless, in both treatments (sputtered or annealed surfaces), molecules evolve from zwitterionic to anionic species over time. Quantum mechanical calculations based in Density Functional Theory (DFT) suggest the energy required to generate vacancies increases with the number of vacancies produced, and the atomic charge of the Fe atoms that is next to a vacancy increases linearly with the number of vacancies. This leads to enhanced redox processes on the sputtered pyrite surface that favour the adsorption of glycine, which is confirmed experimentally by X-ray Photoemission Spectroscopy (XPS). We have investigated theoretically the efficiency of the adsorption process of the zwitterionic glycine onto vacancies sites: this reaction is exothermic, i.e. is energetically favoured and its energy increases with the number of defects, confirming the increased reactivity observed experimentally. The experiments show a treatment-dependent molecular selectivity of the pyrite surface., This work has been supported by the MINECO projects ESP201789053 and PCIN-2017-098. The Instituto Nacional de Tecnica Aeroespacial supported the work performed at CAB and the S.G.M PhD Thesis. This Project has been partially funded by the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 Unidad de Excelencia "Maria de Maeztu"-Centro de Astrobiologia (CSIC-INTA)., Peer review
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemobrionic Fabrication of Hierarchical Self-Assembling Nanostructures of Copper Oxide and Hydroxide

  • Escamilla-Roa, E.
  • Cartwright, Julyan H. E.
  • Sainz-Díaz, C. Ignacio
Copper oxide nanostructures have great potential use in a plethora of nanotechnology applications including nanoelectronics, photovoltaics, sensors, electrochemistry, and pharmacology. In the present work we show how hierarchically nanostructured copper oxide and hydroxide may be prepared through self-assembly from CuSO4 salt and silicate solutions using the chemobrionic growth process of a chemical garden. Procedures were explored using the cupric salt in either solid (pellet and seed growth methods) or liquid phase (fluid injection techniques). Self-assembling nanostructures were characterized by means of environmental scanning electron microscopy (ESEM) with energy-dispersive X-ray spectroscopy (EDX) analysis, micro-Raman spectroscopy and X-ray diffraction. Our results show the formation of crystalline aggregates of copper oxide and hydroxide in complex hierarchical nanostructured forms including fans, flowers, petals, skeins, lentils, and sheaves. Analytical methods corroborate that these nanostructures may be selected in shape and chemical composition with the reaction conditions., We acknowledge the Spanish MINCINN project grants FIS201677692-C2-2P and PCIN-2017-098, along with European FEDER funds and the European COST Action CA17120.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compressibility of 2M 1 muscovite-phlogopite series minerals

  • Hernández Laguna, Alfonso
  • Pérez del Valle, C.
  • Hernández Haro, Noemí
  • Ortega-Castro, Joaquín
  • Muñoz Santiburcio, Daniel
  • Vidal, Isaac
  • Sánchez-Navas, Antonio
  • Escamilla-Roa, E.
  • Sainz-Díaz, C. Ignacio
Muscovite (Ms) and phlogopite (Phl) belong to the 2:1 dioctahedral and trioctahedral layer silicates, respectively, and are the end members of Ms-Phl series minerals. This series was studied in the 2M1 polytype and modeled by the substitution of three Mg2+ cations in the Phl octahedral sites by two Al3+ and one vacancy, increasing the substitution up to reach the Ms. The series was computationally examined at DFT level as a function of pressure to 9 GPa. Cell parameters as a function of pressure and composition, and bulk moduli as a function of the composition agrees with the existing experimental results. The mixing Gibbs free energy was calculated as a function of composition. From these data, approximated solvi were calculated at increasing pressure. A gap of solubility is found, decreasing the gap of solubility at high pressure., This work was supported by Spanish MCINN and European FEDER grants CGL2008-02850/BTE, FIS2013-48444-C2-2P, FIS2016-77692-C2-2P, and PCIN-2017-098 and by the regional agency “Junta de Andalucía” for the RNM-264, -363, and -1897 PAI-grants.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DFT study of electronic and redox properties of TiO2 supported on olivine for modelling regolith on Moon and Mars conditions

  • Escamilla-Roa, E.
  • Zorzano, María Paz
  • Martín-Torres, F. J.
  • Hernández Laguna, Alfonso
  • Sainz-Díaz, C. Ignacio
Titanium dioxide (TiO) is one of the most studied oxides in photocatalysis, due to its electronic structure and its wide variety of applications, such as gas sensors and biomaterials, and especially in methane-reforming catalysis. Titanium dioxide and olivine have been detected both on Mars and our Moon. It has been postulated that on Mars photocatalytic processes may be relevant for atmospheric methane fluctuation, radicals and perchlorate productions etc. However, to date no investigation has been devoted to modelling the properties of TiO adsorbed on olivine surface. The goal of this study is to investigate at atomic level with electronic structure calculations based on the Density Functional Theory (DFT), the atomic interactions that take place during the adsorption processes for formation of a TiO regolith. These models are formed with different titanium oxide films adsorbed on olivine (forsterite) surface, one of the most common minerals in Universe, Earth, Mars, cometary and interstellar dust. We propose three regolith models to simulate the principal phases of titanium oxide (TiO, TiO and TiO). The models show different adsorption processes i.e. physisorption and chemisorption. Our results suggest that the TiO is the most reactive phase and produces a strong exothermic effect. Besides, we have detailed, from a theoretical point of view, the effect that has the adsorption process in the electronic properties such as electronic density of states (DOS) and oxide reduction process (redox). This theoretical study can be important to understand the formation of new materials that can be used as support in the catalytic processes that occur in the Earth, Mars and Moon. Also, it may be important to interpret the present day photochemistry and interaction of regolith and airborne aerosols in the atmosphere on Mars or to define possible catalytic reactions of the volatiles captured on the Moon regolith., Authors acknowledges the Spanish MINECO projects CGL2014-55230-R, PCIN-2017-098, and FIS2016--77692-C2-2-P co-financed with European FEDER funds. We also would like to thank the generous support of Kempe and Wallenberg Foundations. MPZ, JMT, and EER recognize the ESA/Airbus/Air Liquide and Merck Space Exploration Masters challenge 2018 finalist award for Moon ISRU solutions for the Moon Alchemist proposal that uses Moon regolith with TiO2 for methane production., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DFT study of Ni segregation at the B2-NiTi(110)/rutile-TiO2(110) interface

  • Juan, J.
  • Orazi, V,
  • Sandoval, M.
  • Bechthold, P.
  • Hernández Laguna, Alfonso
  • Sainz-Díaz, C. Ignacio
  • González, E.A.
  • Jenko, M
  • Jasen, P.V.
NiTi alloy has important properties such as shape-memory, super-plasticity, resistance, and biocompatibility, therefore is frequently used in biomedical devices. We studied the oxidized form of this alloy and possible Ni segregation in three possible models for the TiO/NiTi interface: i) the perfect interface; ii) the Ni enriched interface and iii) with oxygen vacancies in the TiO coating. We used DFT + U calculations for TiO, because Hubbard correction encourages localization of the excess electronic charge and improves the DFT results. A standard spin polarized DFT was used for NiTi. We obtained the optimized geometries for each model and computed segregation energy, electronic structure, magnetic moment and bond order for the interface and for Ni segregation. Our calculations indicated that Ti species are present at the interface, while in the bulk of the oxide layer the species is the Ti. Also, the electronic structure show that the metallic character of the alloy is unaffected by the interaction with oxygen. These results are consistent with experimental data from literature. Ni enriched interface containing O vacancies show a strong geometric distortion in the TiO layers. In all cases, Ni segregation is an a thermodynamically unfavorable process, helping to understand the biocompatibility of NiTi alloy., Our work was supported by ANPCyT through PICT 2016 Raíces N° 2016-4085 Res. N° 285/16 and PICT 2016 N°2016-4094 Res. N° 285/16 research grants, as well as by SGCyT-UNS. PB, EAG and PVJ are members of CONICET. JJ, MS and VO are fellow researchers at this institution. In addition, AHL and CISD acknowledge the Spanish MINCINN project grants FIS2016-77692-C2-2P and PCIN-2017-098, along with FEDER European funds. Calculations have been performed in the Alhambra Computing Center of University of Granada and in the CSIC Computational Center. Particularly, we acknowledge to Dr. Santiago Melchor Ferrer from University of Granada.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploding Chemical Gardens: A Phase-Change Clock Reaction

  • Ding, Yang
  • Gutiérrez-Ariza, C.M.
  • Sainz-Díaz, C. Ignacio
  • Cartwright, Julyan H. E.
  • Cardoso, Silvana S. S.
Chemical gardens and clock reactions are two of the best-known demonstration reactions in chemistry. Until now these have been separate categories. We have discovered that a chemical garden confined to two dimensions is a clock reaction involving a phase change, so that after a reproducible and controllable induction period it explodes., J.H.E.C. and C.I.S.D. acknowledge the financial support of the Spanish MINCINN projects FIS2016-77692-C2-2-P and PCIN-2017-098. The authors acknowledge the contribution of the COST Action CA17120.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Theoretical study of the gas-phase thermolysis reaction of 3,6-dimethyl-1,2,4,5-tetroxane. Methyl and axial-equatorial substitution effects

  • Bordón, Alexander G.
  • Pila, Andrea N.
  • Profeta, Mariela I.
  • Romero, Jorge M.
  • Jorge, Lilian C.
  • Jorge, Nelly Lidia
  • Sainz-Díaz, C. Ignacio
  • Grand, André
  • Hernández Laguna, Alfonso
Organic peroxides are interesting compounds with a broad range of properties from antimalarial and antimicrobial activities to explosive character. In this work the gas-phase thermolysis reaction mechanism of the 3,6-dimethyl-1,2,4,5-tetroxane (DMT) is studied by DFT calculations, considering axial–axial, axial–equatorial, and equatorial–equatorial position isomers. The critical points of the singlet (S) and triplet (T) potential energy surfaces (PES) are calculated. Three mechanisms are considered: i) S-concerted, ii) S-stepwise, and iii) T-stepwise. The first intermediate of the reaction through S-stepwise-PES is a diradical open structure, o, yielding, as products, two molecules of acetaldehyde and one of O in the S state. The S-stepwise-mechanism gives exothermic reaction energies (Er) in the three position isomers. The S-concerted mechanism yields very high activation energies (Ea) in comparison with those of the S-stepwise mechanism. In the T-stepwise mechanism, a triplet open structure (T-o) is first considered, yielding an Er 12 kcal mol more exothermic than that of the S-mechanisms. The S-o and T-o are similar in structure and energies; therefore, a crossing from the S- to T-PES is produced at the o intermediate as a consequence of a spin–orbit coupling. The highest Ea is the first step after o intermediate, and thus it is considered the rate limiting step. Therefore, the Er at the T-PES is more in agreement with the Er of the exothermic experimental diperoxide products. Ea, Er, and O···O distances are studied as a function of the number of methyl groups and the position isomerization., The authors thank the “Centro de Supercomputación de Galicia” (CESGA), and “Centro de Servicios de Informática y Redes de Comunicaciones (CSIRC), Universidad de Granada” (Spain) for providing the computing time. The authors are thankful to “Secretaría General de Ciencia y Técnica de la UNNE (Argentina)”. This work was supported by Spanish MCINN and European FEDER grants FIS2016-77692-C2-2P, PCIN-2017-098 and by the regional agency “Junta de Andalucía” for the RNM-264, -363 and -1897 PAI-grants.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DFT study of the reduction reaction of calcium perchlorate on olivine surface: Implications to formation of Martian's regolith

  • Escamilla-Roa, E.
  • Zorzano, María Paz
  • Martín Torres, Javier
  • Hernández Laguna, Alfonso
  • Sainz-Díaz, C. Ignacio
Perchlorates have been found widespread on the surface of Mars, their origin and degradation pathways are not understood to date yet. We investigate here, from a theoretical point of view, the potential redox processes that take place in the interaction of Martian minerals such as olivine, with anhydrous and hydrated perchlorates. For this theoretical study, we take as mineral substrate the (1 0 0) surface of forsterite and calcium perchlorate salt as adsorbate. Our DFT calculations suggests a reduction pathway to chlorate and chlorite. When the perchlorate has more than 4 water molecules, this mechanism, which does not require high-temperature or high energy sources, results in parallel with the oxidation of the mineral surface, forming magnesium peroxide, MgO, and in the formation of ClO, which through photolysis is known to form ClO-O. Because of the high UV irradiance that reaches the surface of Mars, this may be a source of O on Mars. Our results suggest that this process may be a natural removal pathway for perchlorates from the Martian regolith, which in the presence of atmospheric water for salt hydration, can furthermore lead to the production of oxygen. This mechanism may thus have implications on the present and future habitability of the Martian surface., Authors would like to acknowledge the contribution of the European COST Action CA17120 supported by the EU Framework Programme Horizon 2020, and the Spanish MINECO projects CGL2014-55230-R, FIS2016-77692-C2, PCIN-2017-098. MPZ acknowledges the partial support of the Spanish State Research Agency (AEI) Project No. MDM-2017-0737. E. E. acknowledges to Rafael Esteso for his help with the Graphical Abstract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling of the adsorption of a protein-fragment on kaolinite with potential antiviral activity

  • Awad, Mahmoud E.
  • Borrego Sánchez, Ana
  • Escamilla-Roa, E.
  • Hernández Laguna, Alfonso
  • Sainz-Díaz, C. Ignacio
This work aimed at studying the potentiality of interactions between kaolinite surfaces and a protein-fragment (350–370 amino acid units) extracted from the glycoprotein E1 in the transmembrane domain (TMD) of hepatitis C virus capsid. A computational work was performed for locating the potential electrostatic interaction sites between kaolinite aluminol and siloxane surfaces and the residues of this protein-fragment ligand, monitoring the possible conformational changes. This hydrated neutralized kaolinite/protein-fragment system was simulated by means of molecular modeling based on atomistic force fields based on empirical interatomic potentials and molecular dynamic (MD) simulations. The MD calculations indicated that the studied protein-fragment interacted with the kaolinite surfaces with an exothermic process and structural distortions were observed, particularly with the hydrophilic aluminol surface by favorable adsorption energy. The viral units isolation or trapping by the adsorption on the kaolinite nanoparticles producing structural distortion of the peptide ligands could lead to the blockage of the entry on the receptor and hence a lack of viral activity would be produced. Therefore, these findings with the proposed insights could be an useful information for the next experimental and development studies in the area of discovering inhibitors of the global challenged hepatitis and other pathogenic viruses based on the phyllosilicate surface activity. These MD studies can be extended to other viruses like the COVID-19 interacting with silicate minerals surfaces., Authors would like to acknowledge the contribution of the European COST Action CA17120 supported by the EU Framework Program Horizon 2020 and the financial support of the Andalusia Government projects [RNM1897 and RNM363, and CTS-946]; the MINECO and FEDER projects [FIS2016-77692-C2-2-P, PCIN-2017-098]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ar+ ion bombardment dictates glycine adsorption on pyrite (1 0 0) surface: X-ray photoemission spectroscopy and DFT approach

  • Gálvez Martínez, Santos
  • Escamilla-Roa, E.
  • Zorzano, María Paz
  • Mateo-Martí, Eva
Ar ion sputtering on pyrite surfaces leads to the generation of sulfur vacancies and metallic iron. Our research shows that sputtering and annealing processes drive electrostatic changes on the pyrite surface, which play an important role in the molecular adsorption of glycine. While both chemical species (anion and zwitterion) adsorb on a sputtered pyrite surface, the anionic form of glycine is favoured. Nevertheless, in both treatments (sputtered or annealed surfaces), molecules evolve from zwitterionic to anionic species over time. Quantum mechanical calculations based in Density Functional Theory (DFT) suggest the energy required to generate vacancies increases with the number of vacancies produced, and the atomic charge of the Fe atoms that is next to a vacancy increases linearly with the number of vacancies. This leads to enhanced redox processes on the sputtered pyrite surface that favour the adsorption of glycine, which is confirmed experimentally by X-ray Photoemission Spectroscopy (XPS). We have investigated theoretically the efficiency of the adsorption process of the zwitterionic glycine onto vacancies sites: this reaction is exothermic, i.e. is energetically favoured and its energy increases with the number of defects, confirming the increased reactivity observed experimentally. The experiments show a treatment-dependent molecular selectivity of the pyrite surface., This work has been supported by the MINECO projects ESP2017- 89053 and PCIN-2017-098. The Instituto Nacional de Técnica Aeroespacial supported the work performed at CAB and the S.G.M PhD Thesis. This Project has been partially funded by the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 Unidad de Excelencia “María de Maeztu”- Centro de Astrobiología (CSIC-INTA).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular interactions of praziquantel drug with nanosurfaces of sepiolite and montmorillonite

  • Borrego Sánchez, Ana
  • Viseras, César
  • Sainz-Díaz, C. Ignacio
Praziquantel drug is nowadays in continuo study to overcome adverse biopharmaceutical properties as drug of first choice for the treatment of the human schistosomiasis. Meanwhile, sepiolite and montmorillonite have been studied experimentally as low-cost nanocarrier to design new praziquantel delivery systems. In this work, the interactions between the drug and clay minerals surfaces are studied at molecular level by computational methods. The optimization of the adsorption of praziquantel in sepiolite nanochannels and in the montmorillonite interlayer space has been studied by using force fields based on empirical interatomic potentials and at quantum mechanical level. The results showed the main interactions between the drug and both clay minerals surfaces at the confined spaces of these minerals, and favorable adsorption energies of the praziquantel-clays complexes were obtained. Therefore, theoretical calculations allow knowing how the drug is adsorbed in the clays and in the case of the montmorillonite how many molecules of the drug are adsorbed in the interlayer space of the mineral according to the experimental data., Authors are thankful to MINECO projects [PCIN-2017-098, FIS2016-77692-C2-2-P and CGL2016-80833-R] and Andalusian projects [RNM1897 and P18-RT-3786] for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Praziquantel-Clays as Accelerated Release Systems to Enhance the Low Solubility of the Drug

  • Borrego Sánchez, Ana
  • Sánchez Espejo, Rita
  • García-Villén, Fátima
  • Viseras, César
  • Sainz-Díaz, C. Ignacio
Praziquantel is an antiparasitic drug indicated for the treatment of the schistosomiasis disease. This drug has very low aqueous solubility, requiring high oral doses for its administration which gives rise to side effects, therapeutic noncompliance and the appearance of resistant forms of the parasite. Clay minerals, like sepiolite and montmorillonite, are innocuous, non-toxic, biocompatible and low-cost excipients. Additionally, clays have high adsorbent properties that allow them to encapsulate drugs in nanometric spaces present in the channels in the case of the sepiolite or between the layers in the case of the montmorillonite. The interactions between the drug and clay minerals are studied experimentally with the strategy for preparing interactions products in organic solvents (ethanol, acetonitrile and dichloromethane) so that the interaction will be more effective and will be enhanced the aqueous solubility of praziquantel. The results showed that in the interaction products, the drug interacted with both clay minerals, which produced the loss of the crystallinity of the drug demonstrated by different techniques. This led to a significant increase in the dissolution rate of the praziquantel in all the interaction products in the simulated gastrointestinal tract media, except for the praziquantel¿montmorillonite product prepared in dichloromethane that presented a controlled release in acid medium. Moreover, in vitro cytotoxicity and cell cycle studies were performed in the interaction products prepared with ethanol. The interaction product with sepiolite was biocompatible with the HTC116 line cells, and it did not produce alterations in the cell cycle. However, interaction products with montmorillonite did not produce cell death, but they showed affectation and damage of cells in the cell cycle study at the highest concentration tested (20¿100 µM). Therefore, the different organic solvents used are adequate for the improvement of the biopharmaceutical profile of praziquantel. Drug¿clay interaction products, specifically with sepiolite, showed very promising results in which new accelerated oral release systems of the praziquantel were obtained, This research was funded by Ministerio de Ciencia e Innovación government, grants numbers PCIN-2017-098, FIS2016-77692-C2-2-P and CGL2016-80833-R and by Consejería de Economía, Innovación, Ciencia y Empleo, Junta de Andalucía government, grants numbers RNM1897 and P18-RT-3786.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Tungstate Chemical Garden

  • Pimentel, Carlos
  • Cartwright, Julyan H. E.
  • Sainz-Díaz, C. Ignacio
Tungstate chemical gardens have been prepared for the first time. The synthesis was carried out using cobalt(II) chloride and sodium tungstate. The reaction occurred in three steps: chimney formation, swelling, and upwelling of the chemical garden. This result opens the door to a new variety of materials., European COST Action. Grant Number: CA17120, EU Framework Programme Horizon 2020; Computational Center of CSIC; Spanish projects. Grant Numbers: FIS2016-77692-C2-2-P, PCIN-2017-098; Juan de la Cierva-Formación postdoctoral contract. Grant Number: FJC2018-035820-I; Spanish Ministry of Science
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation and Structures of Horizontal Submarine Fluid Conduit and Venting Systems Associated With Marine Seeps

  • Rocha, Luis A.
  • Gutiérrez-Ariza, Carlos
  • Pimentel, Carlos
  • Sánchez-Almarzo, Isabel
  • Sainz-Díaz, C. Ignacio
  • Cardoso, Silvana S. S.
  • Cartwright, Julyan H. E.
Methane-rich water moves through conduits beneath the seafloor whose surfaces are formed through precipitation reactions. To understand how such submarine fluid conduit and venting systems form and grow, we develop a detailed mathematical model for this reaction-advection system and we quantify the evolution of an ensemble of similar filaments. We show that this growth can be described by a superposition of advection and dispersion. We analyze analog laboratory experiments of chemical-garden type to study the growth of a single filament undergoing a precipitation reaction with the surrounding environment. We apply these findings to geological fluid conduit and venting systems, showing that their irregular trajectories can lead to very effective spreading within the surrounding seabed, thus enhancing contact and exchanges of chemicals between the conduit and external fluids. We discuss how this methane venting leads to the formation of marine authigenic carbonate rocks, and for confirmation, we analyze two field samples from the Gulf of Cadiz for composition and mineralogy of the precipitates. We note the implications of this work for hydrate melting and methane escape from the seabed., L. A. M. Rocha gratefully acknowledges funding from the Fundação para a Ciência e Tecnologia (FCT), Portugal (grant SFRH/BD/130401/2017). C. Pimentel acknowledges funding from Juan de la Cierva-Formación (grant FJC2018-035820-I) from the Spanish Ministry of Science. J. H. E. Cartwright and C. Ignacio Sainz-Díaz acknowledge the financial support of the Spanish MINCINN projects FIS2016-77692-C2-2-P and PCIN-2017-098. I. Sánchez-Almazo thanks the crew of the Cornide de Saavedra vessel, as well as the members of the Tasyo project, funded by the Spanish Marine Science and Technology Program, for allowing her to participate in the 2000–2001 Anastasya cruises. The authors acknowledge the contribution of the COST Action chemobrionics, CA17120., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical Gardens Under Mars Conditions: Imaging Chemical Garden Growth In Situ in an Environmental Scanning Electron Microscope

  • Sainz-Díaz, C. Ignacio
  • Escribano, Bruno
  • Sánchez-Almazo, Isabel
  • Cartwright, Julyan H. E.
We have performed and visualized chemical garden growth experiments directly in situ in an environmental scanning electron microscope. The microscope chamber simulates the surface of Mars. We demonstrate that chemical gardens can form under the conditions of temperature and pressure existing on Mars in the presence of liquid water, silicates, and metal salts. Using chemical gardens from aluminum salts, tubes were formed where the external surface is formed principally by silicate and the inner surface is predominantly aluminum oxide-hydroxide. It should thus be expected that similar growths of metal salts may be found in geological explorations of water-rich environments during the search for life on Mars., The authors acknowledge funding from Spanish MINCINN project grant FIS2016-77692-C2-2P along with European FEDER funds the European COST Action CA17120 supported by the EU Framework Programme Horizon 2020, and the PCIN-2017-098 project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DFT Simulations of the Structure and Cation Order of Norsethite, BaMg(CO3)2

  • Pimentel, Carlos
  • Pina, Carlos M.
  • Sainz-Díaz, C. Ignacio
Norsethite, BaMg(CO3)2, is an interesting mineral that can be used to investigate processes leading to the formation of dolomite and other dolomite-type structures. To this end, it is first necessary to study in detail the Ba-Mg cation arrangement in the crystal structure of norsethite. In this work, first-principles calculations based on density functional theory (DFT) have been used to simulate cation ordering for the crystal structures of two BaMg(CO3)2 polymorphs: the low-temperature polymorph (up to ∼360 K), α-norsethite (R3¯ c), and the high-temperature polymorph (above ∼360 K), β-norsethite (R3¯ m). We found that for both structural variants of norsethite, the most stable cation arrangements are those with the alternation of barium and magnesium layers along the c-axis. Furthermore, we have adequately simulated nonstoichiometric β-norsethite structures since some synthetic norsethites were found to have an excess of magnesium, which seems to favor the crystallization of β-norsethite at room temperature., The authors thank the Computational Center of CSIC for the high-performance computing service and Spanish projects FIS2016-77692-C2-2-P and PCIN-2017-098 for financial support. C.P. acknowledges Juan de la Cierva-Formación postdoctoral contract (Ref FJC2018-035820-I) from the Spanish Ministry of Science. The authors would also like to thank the three anonymous reviewers and Editor for their work in reviewing and handling this paper.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation and structures of horizontal submarine fluid conduit and venting systems associated with marine seeps

  • Rocha, Luis A. M.
  • Gutiérrez-Ariza, Carlos
  • Pimentel, Carlos
  • Sánchez-Almazo, Isabel
  • Sainz-Díaz, C. Ignacio
  • Cardoso, Silvana S. S.
  • Cartwright, Julyan H. E.
Methane-rich water moves through conduits beneath the seafloor whose surfaces are formed through precipitation reactions. To understand how such submarine fluid conduit and venting systems form and grow, we develop a detailed mathematical model for this reaction-advection system and we quantify the evolution of an ensemble of similar filaments. We show that this growth can be described by a superposition of advection and dispersion. We analyze analog laboratory experiments of chemical-garden type to study the growth of a single filament undergoing a precipitation reaction with the surrounding environment. We apply these findings to geological fluid conduit and venting systems, showing that their irregular trajectories can lead to very effective spreading within the surrounding seabed, thus enhancing contact and exchanges of chemicals between the conduit and external fluids. We discuss how this methane venting leads to the formation of marine authigenic carbonate rocks, and for confirmation, we analyze two field samples from the Gulf of Cadiz for composition and mineralogy of the precipitates. We note the implications of this work for hydrate melting and methane escape from the seabed., L. A. M. Rocha gratefully acknowledges funding from the Fundação para a Ciência e Tecnologia (FCT), Portugal (grant SFRH/BD/130401/2017). C. Pimentel acknowledges funding from Juan de la Cierva-Formación (grant FJC2018-035820-I) from the Spanish Ministry of Science. J. H. E. Cartwright and C. Ignacio Sainz-Díaz acknowledge the financial support of the Spanish MINCINN projects FIS2016-77692-C2-2-P and PCIN-2017-098. I. Sánchez-Almazo thanks the crew of the Cornide de Saavedra vessel, as well as the members of the Tasyo project, funded by the Spanish Marine Science and Technology Program, for allowing her to participate in the 2000–2001 Anastasya cruises. The authors acknowledge the contribution of the COST Action chemobrionics, CA17120.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compressional behavior of the aragonite-structure carbonates to 6 GPa

  • Vidal-Daza, Isaac
  • Sánchez-Navas, Antonio
  • Hernández Laguna, Alfonso
The behaviors of aragonite (CaCO), strontianite (SrCO), cerussite (PbCO), and witherite (BaCO) at increasing pressure have been studied up to 6 GPa using density functional theory with plane waves. A parallelism of the orthorhombic carbonates with the closed-packed AsNi structure is considered in our analysis, being the CO32- groups not centered in the interstice of the octahedron. The decomposition of the unit-cell volume into atomic contributions using the Quantum Theory of Atoms in Molecules has allowed the analysis of the bulk modulus in atomic contributions. The bulk, axes, interatomic distances, and atomic compressibilities are calculated. The largest compression is on the c crystallographic axis, and the c linear modulus has a linear function with the mineral bulk modulus (K). Many of the interatomic distances moduli of the alkaline earth (AE) carbonates show linear functions with the bulk modulus; however, the whole series (including cerussite) only gives linear functions when K is related either with the CC distances modulus or the modulus of the distances of the C to the faces of the octahedron perpendicular to c. These last distances are the projections of the Metal–Oxygen (MO) distances to the center of the octahedron. K carbonates also show linear functions with the atomic moduli of their cations. However, the whole series show a linear relation with the atomic modulus of C atoms. Therefore, the whole series highlight the importance of the C atoms and their interactions in the mechanism of compression of the orthorhombic carbonate series., This work was supported by Spanish MCINN and European FEDER Grants FIS2016-77692-C2. 2PCIN-2017-098 and by the regional agency “Junta de Andalucía” for the RNM-264-363 and RNM-264-1897 PAI-Grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental and Theoretical Studies on the Intercalation of Naproxen into the Mg2Al and Zn2Al Layered Double Hydroxides by Ion Exchange Reaction

  • Pires Figueiredo, Mariana
  • Borrego-Sánchez, Ana
  • Pimentel, Carlos
  • Pérez de la Luz, Alexander
  • Viseras Iborra, César
  • Sainz-Díaz, C. Ignacio
In this work, Layered Double Hydroxide (LDH) materials carrying the worldwide administered non-steroidal anti-inflammatory drug naproxen (NAP), and the sodium naproxenate salt (NaNAP) for comparison, were studied by computational approaches aiming to model the structure of hybrid LDH-drug and shed light on NAP intercalation process. Atomic modeling calculations were performed at the quantum mechanical level based on Density Functional Theory and classical force fields based on empirical interatomic potentials. LDH[sbnd]NAP materials were prepared by ion exchange reaction from MgAl(OH)[sbnd]Cl and ZnAl(OH)Cl pristine phases. The characterization of the materials confirmed NAP intercalation and also the permanence of the pristine phases in the isolated materials after ion exchange. Crystallographic lattice parameters, elemental analysis, and TGA experimental results were then employed in the calculations, which revealed that NAP anions can completely neutralize the positive charge of the LDH layers: both MgAl and ZnAl LDH structures could be optimized with all Cl anions substituted by NAP. The drug assumed different dispositions in the NaNAP crystal or when intercalated into LDH. Additionally, infrared wavenumbers calculations agreed with the experimental results and showed useful to support LDH[sbnd]NAP bands assignment. The employed theoretical models to represent the structure of LDH[sbnd]NAP systems are expected to assist the interpretation of future experimental results and to be used as auxiliary tools to tune properties of LDH-drug pharmaceutical formulations., The authors would like to acknowledge the contribution of the European COST Action CA17120 supported by the EU Framework Program Horizon 2020, and thank the Computational Center of CSIC and the Supercomputing Center Alhambra of UGR for the high-performance computing services. We are grateful to the Laboratório de Espectroscopia Molecular Hans Stammreich (Instituto de Química – USP) for the FT-IR spectra recording and Professor Vera Regina Leopoldo Constantino for the facilities. This work was supported by the Spanish projects FIS2016-77692-C2-2-P and PCIN-2017-098, and the Andalusian project P18-RT-3786. M.P.F. is thankful to the Fundação de Amparo à Pesquisa do Estado de São Paulo (Bolsa de Estágio de Pesquisa no Exterior – BEPE - FAPESP 2018/22782-4), A.P. de la Luz to Secretaría de Educación, Ciencia, Tecnología e Innovación (SECTEI) of the Mexico City for the scholarship for the postdoctoral stay, and C.P. to the Juan de la Cierva-Formación postdoctoral contract (ref. FJC2018-035820-I) from the Spanish Ministry of Science.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Melatonin/nanoclay hybrids for skin delivery

  • Borrego-Sánchez, Ana
  • Muñoz-Santiburcio, Daniel
  • Viseras Iborra, César
  • Hernández-Laguna, Alfonso
  • Sainz-Díaz, C. Ignacio
Melatonin is a hormone used for treating several disorders. However, its oral administration is problematic due to the variable absorption and extensive first-pass metabolism. The topical application of this drug does not present these disadvantages and can be used for therapeutic and skin protection purposes. The adsorption and release of melatonin in the montmorillonite clay were investigated experimentally and theoretically. The drug-clay interaction products were prepared and characterized, showing a modified and improved release of melatonin. The crystal structure and spectroscopic properties of the crystal of melatonin and melatonin-water-mineral materials were studied by molecular modeling, finding that the adsorption of this drug is energetically favourable, and the results were consistent with the experimental data. Ab initio molecular dynamics simulations with the metadynamics methodology showed the release of melatonin from the confined interlayer nanospace of montmorillonite to the liquid bulk water with a 20 kcal/mol free energy barrier., This research was funded by the European COST Action CA17120 supported by the EU Framework Programme Horizon 2020 , the funding support of the Spanish MINECO FIS2016-77692-C2 and PCIN2017-098 projects, and the P18-RT-3786 project with FEDER European contribution .
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-Assembled Structures Formed in CO2-Enriched Atmospheres: A Case-Study for Martian Biomimetic Forms

  • Escamilla-Roa, E.
  • Zorzano, María Paz
  • Martín-Torres, F. J.
  • Sainz-Díaz, C. Ignacio
  • Cartwright, Julyan H. E.
The aim of this study was to investigate the biomimetic precipitation processes that follow the chemical-garden reaction of brines of CaCl2 and sulfate salts with silicate in alkaline conditions under a Mars-type CO2-rich atmosphere. We characterize the precipitates with environmental scanning electron microscope micrography, micro-Raman spectroscopy, and X-ray diffractometry. Our analysis results indicate that self-assembled carbonate structures formed with calcium chloride can have vesicular and filamentary features. With magnesium sulfate as a reactant a tentative assignment with Raman spectroscopy indicates the presence of natroxalate in the precipitate. These morphologies and compounds appear through rapid sequestration of atmospheric CO2 by alkaline solutions of silica and salts., The authors acknowledge the contribution of the European COST Action CA17120 supported by the EU Frame work Programme Horizon 2020 and the Spanish MINECO projects FIS2016-77692-C2 and PCIN-2017-098. M.P.Z. acknowledges the partial support of the Spanish State Research Agency (AEI) Project No. MDM-2017-0737 and of the Spanish Ministry of Science and Innovation project PID2019-104205GB-C21.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular structure and ammonia gas adsorption capacity of a Cu(II)-1,10-phenanthroline complex intercalated in montmorillonite by DFT simulations

  • Sainz-Díaz, C. Ignacio
  • Castellini, Elena
  • Escamilla-Roa, Elizabeth
  • Bernini, Fabrizio
  • Malferrari, Daniele
  • Brigatti, Maria Franca
  • Borsari, Marco
A hydrated complex of 1,10-phenanthroline with Cu cation was intercalated in the interlayer space of montmorillonite. This intercalation occurs initially by through a cation exchange mechanism in which the charge of the complex cation compensates the excess of the negative charge of the interlayer, then, once the cation exchange capacity (CEC) value has been reached, by direct adsorption of the sulfate salt of this complex (i.e. the cation together with its sulfate counterion). This material has showed interesting entrapping properties of gaseous phases and a peculiar chemical reactivity. However, the complete characterization and explanation of the formation of these materials is difficult with only experimental techniques. Hence, we used computational methods at atomic level to know how are the molecular structure of these complexes and their adsorption capacity of ammonia inside the interlayer confined space of montmorillonite for a better understanding of the experimental behaviour. First Principles calculations were performed based on Density Functional Theory (DFT). The intercalation of the phenanthroline-Cu(II) complex inside the nanoconfined interlayer of montmorillonite is energetically favourable in the relative proportion observed experimentally, being a cation exchange process. The further adsorption of the sulfate salt of the phenanthroline-Cu complex is also energetically possible. The adsorption of ammonia molecules in these montmorillonite-phenanthroline-Cu complexes was also favourable according with experimental behaviour., Authors would like to acknowledge the contribution of the European COST Action CA17120 supported by the EU Framework Programme Horizon 2020, and are thankful to the University of Modena and Reggio Emilia for the Visiting Professor programme, to the Computational Centre CIRC of University of Granada, The Computational Center of CSIC in Madrid, and CINECA of Bologna for the high performance computing service, and Spanish projects FIS2016-77692-C2-2-P and PCIN-2017-098 for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Morphology alteration of nickel microstructures for glycerol electrooxidation

  • Houache, Mohamed S. E.
  • Sandoval, Mario G.
  • Safari, Reza
  • Gaztañaga, Francisco
  • Escudero, Federico
  • Hernández Laguna, Alfonso
  • Sainz-Díaz, C. Ignacio
  • Botton, Gianluigi A.
  • Jasen, Paula V.
  • González, Estela A.
  • Juan, Alfredo
  • Baranova, Elena A.
Shape-controlled microstructures (triangles and urchin-like) of Ni were synthesized using polyol synthesis in the presence/absence of capping agent (polyvinilpyrrolidone, PVP). Direct visualization of crystal structure and morphology before/after electrochemical tests in KOH were characterized using electron microscopy techniques. Electrochemical characterizations illustrated that urchin-Ni-PVP has highest catalytic activity among all investigated electrocatalysts for glycerol electrooxidation reaction (GEOR). Improved activity was attributed to the surface area and the highly porous structure as identified by electron tomography analysis. All Ni shapes showed similar selectivity. DFT calculations on low-index β-NiOOH and β-Ni(OH) planes were performed as possible surfaces present during electrochemical processes. The (0 0 1) surface is the most thermodynamically stable in both systems and has different possible terminations. For O, Ni and mixed Ni-O atoms terminations the β-NiOOH(0 0 1) present metallic behavior. DFT results show that either Ni or Ni-O exposed β-NiOOH(0 0 1) surfaces are possible scenarios for glycerol adsorption on different catalytic charged surface sites., This paper was partially supported by grants of CONICET (Argentina National Research Council), Universidad Nacional del Sur (UNS) and by ANPCyT through PICT 4085, and PIP-CONICET Nos. 11220130100436 research grant, as well as by SGCyT- UNS., E. A. G., P. V. J., M. G. S. and A. J. are members of CONICET., F. E and F. G. are fellow researchers at this institution. The authors acknowledge Ni Electro Can project administered from Queen's University and supported by “Grant No. RGPNM 477963-2015 under the Natural Sciences and Engineering Research Council of Canada (NSERC) Discovery Frontiers Program. The support by MinCyT and UOttawa research grant is also acknowledged for travel funds to Universidad Nacional del Sur. M. G. S., A. H.-L. and C. I. S.-D. do thank to Dr. Santiago Melchor Ferrer from the University of Granada for important assistances to the DFT calculations; and A. H.-L. and C. I. S.-D. acknowledge the Spanish MINCINN project grants FIS2016-77692-C2-2P and PCIN-2017-098, along with FEDER European funds; we also thank to the Alhambra Computing Center (University of Granada, Spain) for important CPU time.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mineralogical description and hypothesis on the formation of menilites from Galera, Granada (Spain)

  • Pimentel, Carlos
  • Gutiérrez-Ariza, Carlos
  • Checa, Antonio G.
  • Sainz-Díaz, C. Ignacio
  • Cartwright, Julyan H. E.
Menilites, intriguing botryoidal rocks found in Galera, Granada, Spain, have been examined through a multidisciplinary approach integrating mineralogical analysis and advanced imaging techniques. Characterized as opal and dolomite-bearing rocks, their complex morphologies and diverse internal structures prompted an investigation into their origin. Employing microfocus X-ray diffraction, scanning electron microscopy with energy-dispersive X-ray spectroscopy and X-ray computed tomography, we present a detailed study of the menilites, revealing opal-A, opal-CT, dolomite and quartz as primary constituents. Notably, the internal homogeneity contrasts with the diverse external shapes. The proposed hypothesis suggests a seismic influence in menilite formation. Seismic events in porous environments above the water table may induce fluidization, resulting in the distinctive menilite structures. Osmotic pressure differences between nodules and the surrounding rock, coupled with fluidization during seismic events, could explain the observed morphologies. Validation of the proposed hypothesis requires further fieldwork and analogue experimentation. This study contributes valuable insights into the mineralogical composition, internal structures and potential formation mechanisms of menilites, laying the groundwork for future research in the field of sedimentary geology and mineralogy., Microfocus X-ray diffraction, scanning electron microscopy and X-ray computed tomography analysis and observations were carried out at the Centro de Instrumentación Científica (CIC) of the University of Granada. C.P. acknowledges funding from Juan de la Cierva-Formación (grant FJC2018-035820-I) from the Spanish Ministry of Science. J.H.E.C. and C.I.S.D. acknowledge the financial support of the Spanish MINCINN projects FIS2016-77692-C2-2-P and PCIN-2017-098. A.G.C. was funded by project PID2020116660GB-I00 (Spanish Ministerio de Ciencia e Innovación-FEDER, MCIN/AEI/https:// doi. org/ 10. 13039/ 50110 00110 33).
Docta Complutense
Publicación Artículo científico (JournalArticle)

DFT Simulations of the Structure and Cation Order of Norsethite, BaMg(CO3)2

  • Pimentel Guerra, Carlos
  • Pina Martínez, Carlos Manuel
  • Saínz-Díaz, C.I.
Norsethite, BaMg(CO3)2, is an interesting mineral that can be used to investigate processes leading to the formation of dolomite and other dolomite-type structures. To this end, it is first necessary to study in detail the Ba–Mg cation arrangement in the crystal structure of norsethite. In this work, first-principles calculations based on density functional theory (DFT) have been used to simulate cation ordering for the crystal structures of two BaMg(CO3)2 polymorphs: the low-temperature polymorph (up to ∼360 K), α-norsethite (R3̅c), and the high-temperature polymorph (above ∼360 K), β-norsethite (R3̅m). We found that for both structural variants of norsethite, the most stable cation arrangements are those with the alternation of barium and magnesium layers along the c-axis. Furthermore, we have adequately simulated nonstoichiometric β-norsethite structures since some synthetic norsethites were found to have an excess of magnesium, which seems to favor the crystallization of β-norsethite at room temperature.