Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical Evaluation in a Scaled Rotor-Less Nozzle Vaned Radial Turbine Model under Variable Geometry Conditions

  • Serrano, J.R.|||0000-0003-0692-3917
  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • López-Carrillo, Juan Antonio|||0000-0003-0613-6470
  • Hervás-Gómez, Natalia
[EN] The widespread trend of pursuing higher efficiencies in radial turbochargers led to the prompting of this work. A 3D-printed model of the static parts of a radial variable geometry turbine, the vaned nozzle, and the volute, was developed. This model was up-scaled from the actual reference turbine to place sensors and characterize the flow around the nozzle vanes, including the tip gap. In this study, a computational model of the scaled-up turbine was carried out to verify the results in two ways. For this model, firstly compared with an already validated CFD turbine model of the real device (which includes a rotor), its operating range was extended to different nozzle positions, and we checked the issues with rotor-stator interactions as well as the influence of elements such as the screws of the turbine stator. After showing results for different nozzle openings, another purpose of the study was to check the effect of varying the clearance over the tip of the stator vanes on the tip leakage flow since the 3D-printed model has variable gap height configurations., This research work was supported by Grant PDC2021-120821-I00, funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGeneration EI/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of an Oxy-Fuel Combustion System in a Compression-Ignition Engine for Ultra-Low Emissions Powerplants Using CFD and Evolutionary Algorithms

  • Serrano, J.R.|||0000-0003-0692-3917
  • Bracho Leon, Gabriela|||0000-0002-9198-7044
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Spohr-Fernandes, Cássio
[EN] This study uses an optimization approach for developing a combustion system in a compression-ignition engine that is able to operate under oxy-fuel conditions, and produces mainly CO2 and H2O as exhaust gases. This is achieved because the combustion concept uses pure oxygen as an oxidizer, instead of air, avoiding the presence of nitrogen. The O-2 for the combustion system can be obtained by using a mixed ionic-electronic conducting membrane (MIEC), which separates the oxygen from the air onboard. The optimization method employed maximizes the energy conversion of the system, reducing pollutant emissions (CxHy, particulate matter, and carbon monoxides) to levels near zero. The methodology follows a novel approach that couples computational fluid dynamics (CFD) and particle swarm optimization (PSO) algorithms to optimize the complete combustion system in terms of engine performance and pollutant generation. The study involves the evaluation of several inputs that govern the combustion system design in order to fulfill the thermo-mechanical constraints. The parameters analyzed are the piston bowl geometry, fuel injector characteristics, air motion, and engine settings variables. Results evince the relevance of the optimization procedure, achieving very low levels of gaseous pollutants (CxHy and CO) in the optimum configuration. The emissions of CO were reduced by more than 10% while maintaining the maximum in-cylinder pressure within the limit imposed for the engine. However, indicated efficiency levels are compromised if they are compared with an equivalent condition operating under conventional diesel combustion., This research work has been supported by Grant PDC2021-120821-I00 funded by MCIN/AEI/10.13039/501100011033 and by EuropeanUnion NextGenerationEU/PRTR. This research was partially supported by Agencia Valenciana de la Innovacio (AVI) through the project "Demostrador de un motor de oxicombustion con captura de CO2" (INNVA1/2021/38).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of Variable Geometry Orifice Compressor Technology Impact in a New Generation of Compression Ignition Powertrains at Low-End and Transient Operation

  • Serrano, J.R.|||0000-0003-0692-3917
  • Climent, H.|||0000-0002-2407-5651
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
  • Darbhamalla, Aditya
  • Guilain, Stéphane
[EN] Surge is a phenomenon that limits the operating range of the compressor at low engine speeds and high boost pressure in turbocharged powertrains. This article assesses two prototype turbochargers of variable geometry orifice (VGO) which compensate for the limitation of the boost pressure at low engine speeds. The VGO prototypes modify the inlet compressor section, extending the compressor characteristic map into lower mass flows (surge limit region). The VGO turbochargers analyzed are also both equipped with variable geometry turbine (VGT) technology. The experiments focus on low-end torque operation ranges in steady and transient engine running conditions. The experimental results are used to validate a 1D physical model. From the modelling perspective, a comprehensive study of the VGO-VGT prototypes is assessed. Results reveal the benefits of VGO technology in terms of attaining higher boost pressure, improved compressor efficiency, and overall engine performance at low engine speeds., This research work has been supported by Grant PDC2021-120821-I00 funded by the Spanish Ministerio de Ciencia e Innovacion-Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033), and by the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermo-economic analysis of an oxygen production plant powered by an innovative energy recovery system

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Gutierrez, Fabio Alberto
[EN] Oxy-fuel combustion is considered an attractive alternative to reduce pollutant emissions, which uses high-purity oxygen mixed instead of air for combustion processes. However, purchasing large amounts of high-purity oxygen may be unprofitable for certain industrial sectors, discouraging its implementation. Considering this, the potential of an oxygen production cycle for factories using oxy-fuel combustion is studied by performing a thermo-economic analysis where high-purity oxygen, electricity, and natural gas prices are considered. Oxygen is produced by membrane means, where mixed ionic-electronic conducting membranes are used, which require high temperatures and pressure gradients to work properly. A set of turbochargers is implemented, chosen by scaling an off-the-shelf model, what introduces an innovative way of waste energy recovering for improving the performance of the cycle. The whole cycle is powered by waste heat from high temperature flue gases, and it is sized for a ceramic manufacturing factory. In this work, two cases are analysed, differentiated by considering additional heating and the vacuum generation method in the oxygen line. The first case exhibits smaller production levels, although better profitability (31¿€t¿1), whereas the second case displays higher production levels and production costs (33¿€t¿1). Both cases are competitive concerning the average price of high-purity oxygen, supposing an average of 50¿€t¿1 in wholesale markets, proving the potential of the proposed alternative for oxygen production., This research work has been supported by Grant PDC2021120821-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. This work has also been supported by Grant UPV-SOLGEN-79674 funded by the Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (PAID-11-21). The authors want to acknowledge the institution "Conselleria d'Educacio, Investigaci o, Cultura i Esport de la Generalitat Valenciana" and its grant program "Subvenciones para la contratacion de personal investigador de caracter predoctoral" for doctoral studies (ACIF/2020/246) funded by The European Union. Also, this work is part of grant number INNVA1/2021/38 funded by "Agencia Valenciana de la Innovacion (AVI)" and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring the potential of copper-based catalysts for use IN CO OXIDATION reactions IN OXY-FUEL combustion engines

  • Díaz-Verde, A.
  • Martínez-Munuera, J. C.
  • García-García, A.
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Piqueras, P.|||0000-0002-3767-0839
[EN] Copper/ceria-zirconia (Cu/Ce0.8Zr0.2O2) and copper/perovskite (Cu/BaMnO3) based catalysts have emerged as potential materials to be included in the formulation of oxidation catalysts for automotive applications, due to their tuneable redox properties, their high oxygen storage capacity and a favourable interaction between CuO and the corresponding supports. In this work, these formulations have been synthesised and tested as catalysts for CO oxidation reactions in different oxy-fuel combustion exhaust conditions. Their catalytic performances were compared with those obtained under conventional combustion conditions. The results showed that the copper/ ceria-zirconia catalysts exhibited better catalytic performances than the perovskite-based ones in both exhaust conditions, which also promoted a high resistance to inhibition by the presence of CO2. Furthermore, Cu(6 %)/Ce0.8Zr0.2O2 exhibited the best catalytic performance in all the cases studied, showing an even better behaviour than the noble metal reference Pt(1 %)/Al2O3 under selected boundary conditions lambda = 1., This study was funded by the Spanish Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033) and by European Union NextGenerationEU/PRTR through Grants PDC2021-120821-I00 and PID2019-105542RB-I00 and by Generalitat Valenciana (PROMETEO CIPROM/2021/070 project) . The authors acknowledge Veronica Torregrosa-Rivero for supplying the perovskite-based catalyst and some of its characterization data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Energy recovery potential by replacing the exhaust gases recirculation valve with an additional turbocharger in a heavy-duty engine

  • Serrano, J.R.|||0000-0003-0692-3917
  • Climent, H.|||0000-0002-2407-5651
  • Piqueras, P.|||0000-0002-3767-0839
  • Darbhamalla, Aditya
[EN] A simulation-based assessment of different twin-turbocharging configurations allowing energy recovery from the exhaust gas recirculation flow is performed in a heavy-duty engine from the basis of a single-stage turbocharging architecture. This baseline configuration consists of a single stage turbocharged engine with a low-pressure exhaust gas recirculation system. Experimental data from the baseline engine tests are used to calibrate the model. The novelty of this study is to evaluate the energy recovery potential from the low-pressure exhaust gas recirculation flow by replacing its control valve with a turbine so that the flow energy is not lost due to the expansion across the valve. This additional turbine is coupled to a compressor placed in the intake line so that the turbocharging system is converted into a twin-turbocharging architecture. Different twin-turbocharging con-figurations are tested to attain maximum exhaust gas recirculation rates at 1100, 1500, and 2200 rpm engine speeds with boost pressures ranging from 1.8 to 2.6 bar. Fuel consumption calculations have been performed at constant exhaust gas recirculation rates for all three speeds as well as 1500 rpm partial load operation to attain 11.5 bar of brake mean effective pressure. The results in 8 engine running conditions show that twin-turbocharging with the compressors in series configuration with the exhaust gas recirculation turbine dis-charging after the first stage benefits, in average, from increasing about 5% maximum exhaust gas recirculation rates and saves up to 7% in fuel economy compared to the single-stage turbocharging layout., This research work has been supported by Grant PDC2021-120821- I00 funded by the Spanish Ministerio de Ciencia e Innovacion - Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033) , and by the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On combustion instability induced by water condensation in a low-pressure exhaust gas recirculation system for spark-ignition engines

  • Galindo, José|||0000-0001-6068-182X
  • Navarro, Roberto|||0000-0003-2587-4954
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Pitarch-Berná, Rafael
  • Guilain, Stéphane
[EN] Water condensation in low-pressure exhaust gas recirculation systems is a concern because of a potential impact on components durability, but its implication into the operation of modern spark-ignition engines has not been investigated in detail. In this work, such aspects are evaluated by tests in a turbocharged multi-cylinder engine installed in a climatic test bench. First, a previously developed and validated zero-dimensional model is used to identify conditions where condensation is produced inside the water charge-air cooler, so that the compressor durability and operation is not affected. Then, different engine points are tested with a constant 25% of recirculated rate. Results show that combustion instability can increase up to 6% (absolute) due to droplets accumulation and release inside the water charge-air cooler, confirmed by an endoscope at the WCAC outlet. The evaporation of these droplets during the intake stroke causes charge overleaning in specific cycles, affecting combustion and inducing occasional misfires. Consequently, the fuel consumption and unburned hydrocarbons can be increased up to 4% and 30%, respectively, compared to the results achieved without condensation. The low speed and load condition was clearly the most affected by the sudden dilution given the lower in-cylinder temperatures. The combustion model shows that condensation formation and eventual overleaning phenomenon is increased if low or zero-carbon fuels such as natural gas, methanol, hydrogen or ammonia are used. Results showed an increased temperature for condensation compared to a traditional gasoline, around 10 degrees C for methane and methanol and 20 degrees C for hydrogen and ammonia., This research work has been supported by Grant PDC2021-120821-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEI/PRTR. The authors would like to thank Mr. Vicente Esteve for his collaboration during the experimental campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detailed analysis of particulate emissions of a multi-cylinder dual-mode dual-fuel engine operating with diesel and gasoline

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Villalta-Lara, David
  • Fogué-Robles, Álvaro
[EN] Internal combustion engines are still within the future of highway transport. Low-temperature combustion modes are prone to substitute conventional diesel combustion engines, seeking better performance and improved emissions control. The dual-mode dual-fuel combustion approach has been confirmed as a feasible combustion mode for achieving ultra-low NOx and soot emissions simultaneously. The aim of this work is to experimentally measure the particle emissions of the dual-mode dual-fuel concept while maintaining good thermal efficiency and EURO VI engine-out NOx levels. A detailed analysis of the most relevant characteristics of the particle size distribution is carried out to depict the requirements of a potential filtering system considering the effects of an upstream diesel oxidation catalyst. The results show that total particle numbering is within the typical values of the current most popular technologies: around 2.1013 #/kWh for RCCI and around 1014 #/kWh for DMDF. RCCI combustion tends to produce more particles sized below 35 nm in diameter, while DMDF shows a clear dominance of sizes above 40 nm. In terms of total particulate matter, RCCI results in total mass concentrations around 4 mg/kWh thanks to the highly premixed combustion, but diffusive combustion mode results in total mass emissions over 50 mg/kWh., The authors thank ARAMCO Overseas Company and VOLVO Group Trucks Technology for supporting this research. This research work has been partially supported by Grant PDC2021-120821-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGe-nerationEI/PRTR. The authors acknowledge the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana for partially supporting this research through grant number GV/2020/017
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Exploring the potential of copper-based catalysts for use IN CO OXIDATION reactions IN OXY-FUEL combustion engines

  • Díaz Verde, Álvaro
  • Sanchis, Enrique José
  • Martínez-Munuera, Juan Carlos
  • Garcia-Garcia, Avelina
  • Piqueras, Pedro
  • Díaz Verde, Álvaro|||/items/cd6c7340-fb5a-431d-be4e-8bde8df84857
  • Garcia-Garcia, Avelina|||/items/808fe91f-4dad-4bdc-9433-6321f321e568
Copper/ceria-zirconia (Cu/Ce0.8Zr0.2O2) and copper/perovskite (Cu/BaMnO3) based catalysts have emerged as potential materials to be included in the formulation of oxidation catalysts for automotive applications, due to their tuneable redox properties, their high oxygen storage capacity and a favourable interaction between CuO and the corresponding supports. In this work, these formulations have been synthesised and tested as catalysts for CO oxidation reactions in different oxy-fuel combustion exhaust conditions. Their catalytic performances were compared with those obtained under conventional combustion conditions. The results showed that the copper/ceria-zirconia catalysts exhibited better catalytic performances than the perovskite-based ones in both exhaust conditions, which also promoted a high resistance to inhibition by the presence of CO2. Furthermore, Cu(6 %)/Ce0.8Zr0.2O2 exhibited the best catalytic performance in all the cases studied, showing an even better behaviour than the noble metal reference Pt(1 %)/Al2O3 under selected boundary conditions λ = 1.