Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Bifocal dual reflectarray with curved main surface

  • Pino Garcia, Antonio
  • Rodriguez Vaqueiro, Yolanda
  • Martinez de Rioja, Eduardo
  • Martinez de Rioja, Daniel
  • Gonzalez Valdes, Borja
  • Arias Acuña, Alberto Marcos
  • Rubiños Lopez, Jose Oscar
  • Encinar, José Antonio
  • Toso, Giovanni
This paper presents a novel approach to synthesizing curved reflectarrays using Geometrical Optics (GO). It introduces the concepts of virtual normal and path length shift, which enable a vector-based formulation of the problem that can be solved using ray tracing techniques. The formulation is applied for the design of two different versions of a Dual Bifocal Reflectarray with a parabolic main surface and a flat subreflectarray. The first version aims to enhance the performance of the multibeam antenna by providing a focal ring located at the feed cluster plane. The second version focuses on improving the scanning characteristics of the antenna in the horizontal plane by incorporating two foci. The synthesis procedure yields samples of the path length shift or its derivatives. To reconstruct the phase distribution, an interpolation scheme is employed and described in this paper. Numerical results are presented for both the focal-ring and two-foci configurations, demonstrating the feasibility of this solution for multibeam or scanning satellite antennas operating in the Ka., European Space Research and Technology Centre | Ref. 4000117113/16/NL/AF, Ministerio de Economía y Competitividad | Ref. PDC2021-120959-C21/C22, Ministerio de Ciencia e Innovación | Ref. RYC2021-033593-I, Xunta de Galicia | Ref. GRC-ED431C-2019/25
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Parabolic reflectarray antenna to generate multiple beams for geostationary high throughput satellites in Ka-band

  • Martínez de Rioja, Daniel
  • Martínez de Rioja, Eduardo
  • Rodríguez Vaqueiro, Yolanda
  • Encinar, José A
  • Pino García, Antonio
  • Arias Acuña, Alberto Marcos
  • Arrebola, Manuel
  • Toso, Giovanni
This contribution describes the design and simulations of a multibeam 1.8 m parabolic reflectarray antenna for geostationary high throughput satellites (HTS) in Ka-band. The parabolic reflectarray generates two orthogonal circularly polarized beams per feed simultaneously at 19.7 and 29.5 GHz, by the variable rotation technique. The antenna is made of 62 654 reflectarray cells, which include two types of printed elements independently rotated and adjusted. The elements have been optimized one by one to ensure the required phase-shift at each frequency. A novel design approach has made it possible to promptly obtain an initial layout of every element with a very low computational cost. The simulated radiation patterns show that the parabolic reflectarray, illuminated by 27 dual-circularly polarized feeds, can generate 54 spot-beams in two orthogonal polarizations, with a beam spacing of 0.56° between adjacent beams. The design and simulation tools have been validated by a parabolic reflectarray scaled in a factor of 0.5, which has been manufactured and tested. The proposed reflectarray would allow to generate a complete multi-spot coverage from a geostationary HTS with only two parabolic reflectarrays, instead of four reflector antennas, also reducing the number of feeds by half, since every feed generates two beams., Agencia Estatal de Investigación | Ref. PID2020-113979RB-C22, Agencia Estatal de Investigación | Ref. PID2020-114172RB-C21-2, Agencia Estatal de Investigación | Ref. PDC2021-120959-C21