Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aluminum Guefoams Coated with Reduced Graphene Oxide: A Corrosion Protection Study.

  • Rodrigo-Roca, Rubén
  • Maiorano, Lucila P.
  • Molina, José M.
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Cases, Francisco|||0000-0001-8105-4489
[EN] To enhance their corrosion protection, Guefoams were coated with RGO using both potentiostatic and potentiodynamic methods. The potentiodynamic method produced the thickest RGO coating and the lowest Cl, O, and Al content, as observed using FESEM and EDX. The Guefoams were exposed to a 3.5% NaCl solution and steam. The polarization resistance was examined, electrochemical impedance spectroscopy was performed, and polarization curves were constructed to monitor the corrosion process. After 28 days, the Al concentrations in the solutions were measured, and were found to be 145 mg/L (bare Guefoam), 70 mg/L (RGO-coated, potentiostatic), and 35 mg/L (RGO-coated, potentiodynamic). The potentiodynamic RGO coating also showed the best corrosion protection values., This research is part of the Spanish R+D+i contracts PDC2021-121617-C21 and PDC2021-121617-C22, funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital (Generalitat Valenciana) is gratefully acknowledged for providing funding (GVA-COVID19/2021/097). Fundingfor the open access charge was provided by CRUE-Universitat Politecnica de Valencia. The funding sources had no involvement in the study design; in the collection, analysis, and interpretation of data; in the writing of the report; or in the decision to submit the article for publication.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Al Guefoams protected against corrosion by RGO

  • Rodrigo, Rubén
  • Molina Puerto, Javier|||0000-0003-3378-8271
  • Bonastre Cano, José Antonio|||0000-0002-5068-6608
  • Maiorano, Lucila P
  • Molina, José M
  • Cases, Francisco|||0000-0001-8105-4489
To enhance their corrosion protection, Guefoams were coated with RGO using both potentiostatic and potentiodynamic methods. The potentiodynamic method produced the thickest RGO coating and the lowest Cl, O, and Al content, as observed using FESEM and EDX. The Guefoams were exposed to a 3.5% NaCl solution and steam. The polarization resistance was examined, electro-chemical impedance spectroscopy was performed, and polarization curves were constructed to monitor the corrosion process. After 28 days, the Al concentrations in the solutions were meas-ured, and were found to be 145 mg/L (bare Guefoam), 70 mg/L (RGO-coated, potentiostatic), and 35 mg/L (RGO-coated, potentiodynamic). The potentiodynamic RGO coating also showed the best corrosion protection values., Thanks to the projects PDC2021-121617-C21 and PDC2021-121617-C22, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. and Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital (Generalitat Valenciana) (GVA-COVID19/2021/097).The Electron Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged for their help with the FESEM and EDX characterization.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design of Replicated Open-Pore Aluminium Cellular Materials with a Non-Stochastic Structure for Sound Absorption Applications

  • Carbajo, Jesús
  • Molina Jordá, José Miguel
  • Maiorano Lauría, Lucila Paola
  • Ghaffari Mosanenzadeh, Shahrzad
  • Fang, Nicholas X.
  • Carbajo, Jesús|||/items/0290ef2b-a2e9-4f49-a1bb-38aabf5895fe
  • Maiorano Lauría, Lucila Paola|||/items/f667840c-2310-43e7-bfb3-3c98cd06e781
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Several porous materials, especially natural fibres and polyurethane foams, are frequently used as sound absorbers in multiple noise reduction applications. Notwithstanding their excellent absorption performance, these materials usually lack the structural strength and fire resistance required for use in aggressive environments or situations requiring structural stability. This paper proposes the design of open-pore polymer and aluminum cellular materials with non-stochastic structures for sound absorption. These materials were fabricated using additive manufacturing (polymeric materials) and the replication method (aluminum materials), which involves infiltrating porous preforms formed by compacting spheres of a martyr material, such as NaCl, with liquid aluminum. The proposed materials can be employed as a resonator system when backed by an air cavity, with the change in cavity depth used to tune its sound absorption peak. Following the standard ASTM E1050, the sound absorption of these materials was investigated. In addition, the sound absorption performance of the materials was predicted using an Equivalent Circuit Method model. The experimental results are consistent with those predicted by the model, highlighting the potential of the microstructural and configurational design of these materials as sound absorbers.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Aluminum Guefoams Coated with Reduced Graphene Oxide: A Corrosion Protection Study

  • Rodrigo, Rubén
  • Molina, Javier
  • Bonastre Cano, José Antonio
  • Maiorano Lauría, Lucila Paola
  • Molina Jordá, José Miguel
  • Cases Iborra, Francisco Javier
  • Maiorano Lauría, Lucila Paola|||/items/f667840c-2310-43e7-bfb3-3c98cd06e781
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
To enhance their corrosion protection, Guefoams were coated with RGO using both potentiostatic and potentiodynamic methods. The potentiodynamic method produced the thickest RGO coating and the lowest Cl, O, and Al content, as observed using FESEM and EDX. The Guefoams were exposed to a 3.5% NaCl solution and steam. The polarization resistance was examined, electrochemical impedance spectroscopy was performed, and polarization curves were constructed to monitor the corrosion process. After 28 days, the Al concentrations in the solutions were measured, and were found to be 145 mg/L (bare Guefoam), 70 mg/L (RGO-coated, potentiostatic), and 35 mg/L (RGO-coated, potentiodynamic). The potentiodynamic RGO coating also showed the best corrosion protection values.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Model and Validation Study for Optimizing Students’ Positions in Classrooms to Limit the Spread of Infectious Diseases Such as COVID

  • Molina Jordá, José Miguel
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Classrooms at any educational institution have become high-risk sites for contagion during past and present pandemic periods caused by the SARS-CoV-2 (COVID-19) viral siege, given the prolonged time educators and students spend in joint activity. Among the several strategies employed by educational institutions to minimize the outbreak of contagion are regulating classroom capacity and studying the optimal spatial arrangement of students. The architectural features of each classroom, which include corridors, ventilation components, total volume, and maximum capacity, among other factors, have a direct impact on the risk of human contagion. This work is a proposal to optimize the spatial arrangement of students to minimize the risk of contagion, considering not only the distance between them, but also the different architectural features in the classrooms. The analyses conducted in the different scenarios conclude with a comparison of risk in terms of the arrangement of students that various educators would have used at different education levels in their classrooms based solely on intuitive criteria. The results indicate that in some situations, the locations chosen by educators can double the risk of infection compared to optimal arrangements.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Breaking barriers in thermal interface materials: Ultrahigh thermal conductivity and electrical insulation in epoxy/diamond composites via multimodal packing and dual-mode interface engineering

  • Molina Jordá, José Miguel
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Achieving high thermal conductivity together with electrical insulation remains a central challenge in the development of thermal interface materials for advanced electronics. Bulk diamond meets both requirements but is constrained by cost and processability, steering efforts toward electrical insulating diamond-filled polymer composites, most of which deliver thermal conductivities < 3 W·m⁻1·K⁻1, while only a few exceeded 12  W·m⁻1·K⁻1. Here we demonstrate infiltrated epoxy/diamond composites that combine trimodal diamond packing with roughened, sp2-carbon interfaces, enabling ultrahigh thermal conductivities up to 40  W·m⁻1·K⁻1 while preserving electrical resistivities > 3.5 × 101⁰ Ω·m. Trimodal packing raises filler loading (up to a volume fraction of 0.85), full epoxy infiltration suppresses electrical percolation, and roughened, in-situ graphitized interphases reduce thermal boundary resistance. This > 300% improvement over the state-of-the-art diamond-containing polymer composites outlines a scalable, cost-effective route to thermally conductive, electrically insulating materials. These materials are highly promising for applications in microelectronics, power electronics, and next-generation high-density devices.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Foams Containing Guest Phases (Guefoams) for Emerging Applications: Thermal Management and Pathogen Microorganism Capture

  • Guidoum, Maroua
The demand for multifunctional porous materials in advanced technological applications has intensified, pushing the boundaries beyond what conventional porous materials can achieve. This necessitates the creation of novel materials that can seamlessly integrate diverse functions. In this context, the drive to enhance foam efficiency is spurred by the need to elevate fundamental characteristics and extend the applicability of foams to meet the intricate demands of modern technologies. This pursuit is motivated by the aspiration to uncover new levels of functionality and performance, enabling foams to address challenges that conventional materials struggle to overcome. In response to this challenge, extensive efforts have been made to enhance the properties of foams, particularly, open-pore foams. These attempts encompass a range of approaches, from optimizing manufacturing methodologies to incorporating diverse materials, all aimed at meeting multifaceted requirements across many applications. This thesis study multifunctional porous materials known as Guefoam with defined porosity using metal, polymer and ceramic precursors. The multifunctional Guefoam is an open-cell foam (host foam) that contains guest phases in porous cavities (no chemical or physical interaction), where the cavities contain other phases that provide specific functionalities and allow flow to pass through. The focus is on investigating the ability of the guest phase to enhance heat transfer dissipation of metal Guefoams and to remove waterborne microorganisms within the polymer Guefoams. In thermal management, two types of foams were fabricated using the replication method: conventional aluminum foams and aluminum Guefoams (containing guest phases). Additionally, tin foam and Guefoam were fabricated for comparison in properties to assess the effect of changing the matrix. Open-pore foams and Guefoams were fabricated using two types of preforms: NaCl spheres and NaCl-containing steel spheres as guest phases, respectively. Two groups of samples were developed with different average sizes of pore interconnecting windows by applying two different pressures. They are classified as samples with large windows with an average size of 0.66-0.73 mm (foam 1, Guefoam 1 (containing 2 mm steel spheres), and Guefoam 2 (containing 3 mm steel spheres)), and samples with small windows of an average size of 1.29-1.31 mm (foam 2, Guefoam 3 (containing 2 mm steel spheres), and Guefoam 4 (containing 3 mm steel spheres)), fabricated under infiltration pressures of 0.5 bar and 1.5 bar, respectively. The size of pore interconnecting windows, guest sizes, porosity, and the sample length structure were varied to observe their effects on the functional properties of the samples and to determine the most optimal structure for the desired application. The structural parameter characterization porosity, metal volume fraction, size distribution of pore interconnecting windows and guest occupation (GO) was correlated to the fluid flow behaviors of samples which were evaluated through measurements of pressure drop, permeability, and the form drag coefficient. Additionally, these structural parameters were also correlated with the thermal behaviors of the samples, including power dissipation density and thermal conductivity. In pathogen microorganism capture application, foam and Guefoam were fabricated with ceramic and polymer liquid precursors via the replication method. This method allows to produce porous metals with homogenous interconnecting windows and provides high control over pore shape, size, and size distribution. However, the NaCl template cannot be utilized to produce foams with ceramic and polymer liquid precursors since they tend to completely (or partially) dissolve the NaCl during processing and wet the NaCl particles, respectively, and, as a result, leave no interconnecting windows between pores. To address this limitation, a modification to the replication method is proposed. This modification involves the incorporation of paraffin as a secondary templating agent that coats the NaCl particles. After heat treatment, the paraffin creates binding collars between the NaCl particles that ensure the formation of interconnecting windows after the double template removal. The fabricated Guefoams with different sizes of pore interconnecting windows and iodine-impregnated activated carbon (I-AC) guest phases were tested for Escherichia coli removal. The size of pore interconnecting window determines the permeability and pressure drop in these materials, and thus, their energy efficiency. By precisely controlling the number and the size of pore interconnecting windows, the permeability and interaction between the guest phase and bacteria-bearing water could be optimized. Designing materials with interconnecting windows ranging from 0.40-0.83 mm, exhibit highly permeable properties for efficient water filtration. Consequently, the developed materials hold great potential for future advancements in energy-efficient and functionally effective filter systems. In this thesis study, a new family of open-pore foams called Guefoam (an acronym for guest-containing foam) was successfully fabricated via the replication method using different matrices, cement, resin epoxy, aluminum and tin. The structural morphology, including porosity, guest size, pore size, size of pore interconnecting window, were all controlled. Their effects on the functional properties of foam and Guefoam materials were investigated by numerous characterization studies. The focus has been directed towards improving foam materials functionality by incorporating different guest phases. This endeavor in the domain of material design and application emanates with an extraordinary potential to profoundly influence and enrich the scientific community. As the frontiers of possibility continue to expand, this study illuminating the trajectory of Guefoam materials towards advancements that are poised to undoubtedly shape a brighter and more promising future.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Open-cell aluminum foams with bimodal pore size distributions for emerging thermal management applications

  • Durmus, Fatma Cagla
  • Maiorano Lauría, Lucila Paola
  • Molina Jordá, José Miguel
  • Maiorano Lauría, Lucila Paola|||/items/f667840c-2310-43e7-bfb3-3c98cd06e781
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Recent advances in cellular materials for active thermal management applications involve the integral design of their porous structure. In this work, open-cell aluminum foams with porosities in the range of 0.60–0.76 are developed, containing pores with spherical geometry and a bimodal pore size distribution. The fabrication strategy involves the use of the replication method by infiltration with liquid aluminum of porous preforms formed by packing NaCl spheres of two largely different sizes (7 mm and 1 mm average diameter), which are then removed by water dissolution. The paper describes cellular materials with different proportions of coarse and fine pores. Their detailed characterization by pore volume fraction, pressure drop, permeability, thermal conductivity and heat transfer coefficient is supported by analytical schemes. In addition, these materials were characterized under realistic operating conditions using computational fluid dynamics simulations. The material with 67 percent coarse pores and 33 percent fine pores, which has the highest porosity (and thus permeability), has the most appealing heat dissipation properties with the lowest pressure drops, making it an excellent candidate for emerging thermal management applications in electronic systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Magneto-inductive open-cell cellular carbon composites with activated carbon as guest phase: Guefoams for energy-efficient VOCs management

  • Molina Jordá, José Miguel
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Guefoams (guest-containing foams) are a new-class of open-cell cellular materials that extend the properties of conventional foams by incorporating guest phases that convert them into multifunctional materials. This manuscript describes the development of pitch-derived composite guefoams that contain two types of inclusions: iron nanoparticles embedded in the cellular skeleton and activated carbon particles as guest phases. The activated carbon particles significantly increase the specific surface area and gas adsorption capacity. When these materials are exposed to low-intensity magnetic fields, the iron nanoparticles confer a high magneto-inductive capacity that enables ultrafast heating and rapid desorption of adsorbed species. The ability of these materials to act as preconcentrators for volatile organic compounds (VOCs) is demonstrated in this work using toluene as a proof of concept. The Guefoams developed here have greater preconcentration capabilities than current state-of-the-art systems while also being significantly more energy efficient due to the magnetic induction controlled desorption process. This unparalleled blend of properties makes these guefoams a valuable tool for energy-efficient VOCs management.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Energy-efficient cooling of electronics using non-stochastic aluminum/diamond composite foams with engineered interfaces

  • Maiorano Lauría, Lucila Paola
  • Molina Jordá, José Miguel
  • Maiorano Lauría, Lucila Paola|||/items/f667840c-2310-43e7-bfb3-3c98cd06e781
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
The progressive miniaturization and rising power densities of electronic devices have intensified the need for materials enabling energy-efficient thermal management. This study introduces high-porosity, non-stochastic aluminum/diamond composite foams with engineered interfaces to enhance heat dissipation. . Ceramic molds were first prepared by inverse replication of additively manufactured Kelvin-cell PLA templates, producing high-porosity structures with controlled geometry and interconnectivity. Molten aluminum was then infiltrated under pressure into these molds densely packed with diamond particles, forming aluminum/diamond composite foams. Controlled in situ formation of Al4C3 interfacial phases significantly boosted thermal transport, yielding thermal conductivities up to three times higher than pure aluminum Kelvin foams, while maintaining low pressure drops. Compared to commercial aluminum and copper Duocel® foams of equivalent porosity, the composite foams achieved 240% and 120% higher conductivities, respectively, with superior balance between thermal performance and flow resistance. Power dissipation tests showed up to near 50% improvement over pure aluminum foams. The heat dissipation behavior in a representative electronic cooling scenario was evaluated through CFD simulations incorporating the experimentally measured thermal properties of the composite foams, resulting in reduced hotspot temperatures compared to pure aluminum foams. Analytical and numerical validation confirmed that interfacial engineering and non-stochastic design effectively improve heat transfer and energy efficiency. The results position the developed architected Al/diamond composite foams as promising candidates for next-generation electronic cooling materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Low-porosity aluminum foams with steel guest phases as disruptive materials for active thermal management

  • Maiorano Lauría, Lucila Paola
  • Guidoum, Maroua
  • Molina Jordá, José Miguel
  • Maiorano Lauría, Lucila Paola|||/items/f667840c-2310-43e7-bfb3-3c98cd06e781
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Low-porosity metal foams, emerging as promising materials for efficient heat dissipation, outperform their high-porosity counterparts in conductive-convective performance. However, their current thermal capabilities fall short for cutting-edge electronics. This study introduces newly designed Guefoams, a novel family of low-porosity foam materials, and explores their suitability for heat dissipation. The Guefoams prepared herein feature a unique structure with guest phases (steel spheres) seamlessly integrated into the porous cavities of aluminum foams, devoid of bonds with the foam matrix. The study emphasizes the impact of design parameters (dimensions of interconnecting windows and guest phases) on thermo-fluid dynamic properties. The empirical evidence, supported by computational simulation results, demonstrates that these guest phases significantly enhance heat transfer by up to 60 % compared to analog low-porosity aluminum foams. This enhancement primarily arises from two factors: i) altering fluid dynamics via guest phase impedance, influencing flow patterns, and ii) amplifying surface area for greater solid-fluid heat transfer. Compared to high-porosity aluminum foams, a current standard in heat dissipation, the developed materials exhibit heat transfer coefficients >600 % higher. Overall, these advancements position the developed Guefoams as a promising solution for demands in challenging active heat dissipation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Synergistic energy-efficient capture of VOCs and metal-free catalytic conversion using magneto-inductive Guefoams: Proof-of-concept in n-hexane-enriched nitrogen streams

  • Verdú Molina, Noelia
  • Molina Jordá, José Miguel
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Addressing contemporary environmental and health concerns requires reducing pollutant emissions and converting them into less harmful or valuable compounds within the framework of the circular economy. Guefoam materials offer a promising solution by enabling the capture and pre-concentration of volatile organic compounds (VOCs), while facilitating the structuring of active phases for heterogeneous catalytic conversions. This study demonstrates the benefits of merging two newly designed electromagnetic induction-assisted ceramic matrix Guefoams into a portable integrated unit, synergizing the pre-concentration and chemical transformation of n-hexane, a VOC with special challenges. One Guefoam serves as an adsorbent, whereas the other plays a catalytic role. These Guefoams host guest phases, which consist of composite materials combining a steel core with magneto-inductive properties encased in a highly porous carbonaceous layer. This carbonaceous material undertakes a dual mission: adsorbing n-hexane from a nitrogen stream within the adsorptive Guefoam and, upon phosphorus doping in the catalytic Guefoam, orchestrating the metal-free selective dehydroaromatization of n-hexane into benzene. The design and integration of these novel Guefoam materials into a unified functional entity prove highly effective in pre-concentrating (enrichment factors up to 275) and catalyzing n-hexane with up to 84 % conversion and 94 % benzene selectivity while remaining energy-efficient and environmentally sustainable.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable assembling of graphite flakes into graphite/carbon composite foams with thermal percolative interfaces for active heat dissipation

  • Maiorano Lauría, Lucila Paola
  • Verdú Molina, Noelia
  • Molina Jordá, José Miguel
  • Maiorano Lauría, Lucila Paola|||/items/f667840c-2310-43e7-bfb3-3c98cd06e781
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Current methods for producing open-pore graphite foams with heat dissipation potential involve costly graphitization processes, limiting their widespread use. This study presents a sustainable approach to fabricate high-performance graphite/carbon composite foams with porosities in the range of 49–82 %. The method involves the densification and carbonization of solid mixtures comprising natural graphite flakes, sucrose, and NaCl particles. The dissolution of NaCl creates coarse pores, while carbonized sucrose contributes fine porosity and serves as a binder to impart mechanical stability, ensuring the maintenance of thermally conductive percolative contacts between flakes. The composite foams exhibit thermal conductivities of up to 91 Wm−1K−1, permeability values in the range of 10−11–10−10 m2, and excellent mechanical properties. Experimental and computational findings demonstrate that the developed materials surpass the heat dissipation capabilities of conventional heat sinks based on graphite and aluminum foams by about 3 and 1.5 times, respectively, making them excellent candidates for thermal management applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Al/Gf composite foams with SiC-engineered interfaces for the next generation of active heat dissipation materials

  • Maiorano Lauría, Lucila Paola
  • Castillo, R.
  • Molina Jordá, José Miguel
  • Maiorano Lauría, Lucila Paola|||/items/f667840c-2310-43e7-bfb3-3c98cd06e781
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
Interfacial engineering has been investigated as a method of increasing thermal conductivity in a variety of aluminium/graphite composites but remains unexplored in the few graphite-containing aluminium foams developed to date. In this study, the replication method was used to fabricate aluminium/graphite composite foams by infiltrating with liquid aluminium packed preforms containing SiC-coated oriented graphite flakes and NaCl particles, the latter acting as a templating agent. The effects of interfacial modification caused by the SiC presence were investigated alongside those of NaCl and graphite flake particle sizes. Materials benefit from low pressure drops when large NaCl particles are used. Furthermore, large graphite flakes coated with SiC provide thermal conductivities up to 232 Wm-1K-1, improved mechanical properties and power dissipation capacities up to 2-fold and 6-fold higher than aluminium/graphite composite foams with unmodified interfaces and standard aluminium foams, respectively, making them ideal candidates for active heat sinks in next-generation electronic devices.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Guefoams (guest-containing foams) as novel heterogeneous catalysts: preparation, characterization and proof-of-concept testing for CO2 methanation

  • Maiorano Lauría, Lucila Paola
  • Chaparro-Garnica, Cristian Yesid
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Molina Jordá, José Miguel
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Chaparro-Garnica, Cristian Yesid|||/items/035730b2-a503-4ac7-a929-df1d62bd9bb8
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Maiorano Lauría, Lucila Paola|||/items/f667840c-2310-43e7-bfb3-3c98cd06e781
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
The preparation and use of Guefoams as heterogeneous catalyst is reported. The Guefoam catalyst consists of an open-pore Al-Si foam that accommodates a freely mobile guest phase (Ni/CeO2/Al2O3 particles) in its cavities, with neither a physical nor a chemical matrix-guest bond. A eutectic Al-12Si alloy was used as a low-melting matrix precursor to prevent thermal sintering of the active phase during liquid metal infiltration. CO2 methanation was chosen as the reaction test. The activity and CH4 selectivity (close to 100%) achieved with the Guefoam catalyst were similar to those obtained with a packed bed of the same active phase particles, but with the advantages of a structured reactor such as robustness and ease of handling. The thermal conductivity of the Guefoam catalyst is significantly improved with regard to the packed bed of active phase particles, which reduces the temperature gradients in the catalytic reactor, as demonstrated by computational fluid dynamic modelling. Since the permeability of the Guefoam catalyst is 2.7 times that of the packed bed, the pressure drop caused by the passage of a fluid through the novel material is reduced, resulting in a significantly higher catalytic performance index than the packed bed.