Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

High degree of silanization of olive wood shell stone and its use in polyester biocomposites

  • Olmedo-Navarro, Melissa
  • Pérez, Juana M.
  • Gutierrez-Segura, Natalia
  • Sánchez-Sevilla, Bernardo
  • Soriano-Jerez, Yolanda
  • Alonso, Diego A.
  • Cerón, Mari Carmen
  • Fernández, Ignacio
  • Alonso, Diego A.|||/items/c952d573-9ba4-49ec-8836-8a6c9dc6f205
A full optimization of the reaction conditions for the high degree of functionalization of olive wood shell stone (OS) with silanes of different nature has been conducted. The assayed silanes were 3-aminopropyltrimethoxysilane (APTMS), γ-methacryloxypropyltrimethoxysilane (MEMO), 3-(2-aminoethylamino)propyltrimethoxysilane (AEAPTMS) and octadecyltrimethoxysilane (ODTMS) obtaining high degrees of functionalization of the initial native OS. A complete characterization of the functionalized OS materials was performed using a plethora of techniques such as Fourier transform infrared spectroscopy (FTIR-ATR and FTIR-DRIFT), ζ-potential, elemental analysis, X-ray fluorescence (XRF), thermogravimetry (TG), moisture content, and particle size distribution. The potential use of these materials was subsequently studied in the synthesis of biocomposites partially replacing the conventional inorganic filler, which due to its crystallinity is known to be not beneficial for human health. The obtained biocomposite materials were studied by means of flexural resistance, Barcol hardness, colorimetry, static contact angle, and dynamic-mechanical analysis (DMA).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antifouling performance of transparent PEG/PDMS and PMMA-based surfaces against commercially relevant microalgae

  • Álvarez-Álvarez, Agustín
  • Soriano-Jerez, Yolanda
  • Bressy, Christine
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • García-Camacho, F.
  • Cerón-García, María del Carmen
Biofouling remains a critical bottleneck in closed photobioreactors. This study proposes an integrated strategy combining culture medium harmonization, nitrogen-to‑phosphorus (N/P) ratio optimization, and evaluation of transparent antifouling materials (a PEG/PDMS-based coating and a PMMA-based material) under microalgal cultivation conditions. Five industrially relevant microalgae species were successfully grown in a common N-ALGAL medium, enabling unbiased comparison of adhesion behaviour. Increasing the N/P ratio enhanced biomass and lipid accumulation while reducing extracellular protein release and cell adhesion. Although neither antifouling surface completely prevented attachment, both materials significantly reduced fouling compared to glass (45–62% for the coating and 65–74% for the rigid material), while preserving the optical transparency. Antifouling performance was primarily associated with interfacial hydration behaviour and overall surface physicochemical properties rather than a single optimal surface energy. Overall, the rigid transparent material showed the greatest potential for practical implementation in closed photobioreactors applications., This work was supported by the Spanish Ministry of Science and Innovation (grant PDC2022-133206-I00) and the European Regional Development Fund Programme. Y. Soriano-Jerez is grateful for personal funding from the University of Almería, Spain., Peer reviewed