Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamically stable topological phase of arsenene

  • Rahman, Gul
  • Mahmood, Asad
  • García-Suárez, Víctor M.
First-principles calculations based on density functional theory (DFT) are used to investigate the electronic structures and topological phase transition of arsenene under tensile and compressive strains. Buckling in arsenene strongly depends on compressive/tensile strain. The phonons band structures reveal that arsenene is dynamically stable up to 18% tensile strain and the frequency gap between the optical and acoustic branches decreases with strain. The electronic band structures show the direct bandgap decreases with tensile strain and then closes at 13% strain followed by band inversion. With spin-orbit coupling (SOC), the 14% strain-assisted topological insulator phase of arsenene is mainly governed by the p-orbitals. The SOC calculated bandgap is about 43 meV. No imaginary frequency in the phonons is observed in the topological phase of arsenene. The dynamically stable topological phase is accessed through Z2 topological invariant ν using the analysis of the parity of the wave functions at the time-reversal invariant momentum points. The calculated ν is shown to be 1, implying that arsenene is a topological insulator which can be a candidate material for nanoelectronic devices., G.R. acknowledges the higher education commission (HEC) of Pakistan under the project ‘electronic structure calculations using density functional theory’ and the GIK Institute for providing supercomputing facilities. V.M.G.S. thanks the Spanish Ministerio de Economía y Competitividad for funding through the project FIS2015-63918-R and the Spanish Ministerio de Ciencia, Innovación y Universidades for funding through the project PGC2018-094783-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A mechanically tunable quantum dot in a graphene break junction

  • Caneva, Sabina
  • Hermans, Matthijs
  • Lee, Martin
  • García-Fuente, Amador
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Dekker, Cees
  • Ferrer, Jaime
  • Zant, Herre S. J. van der
  • Gehring, Pascal
Graphene quantum dots (QDs) are intensively studied as platforms for the next generation of quantum electronic devices. Fine tuning of the transport properties in monolayer graphene QDs, in particular with respect to the independent modulation of the tunnel barrier transparencies, remains challenging and is typically addressed using electrostatic gating. We investigate charge transport in back-gated graphene mechanical break junctions and reveal Coulomb blockade physics characteristic of a single, high-quality QD when a nanogap is opened in a graphene constriction. By mechanically controlling the distance across the newly formed graphene nanogap, we achieve reversible tunability of the tunnel coupling to the drain electrode by 5 orders of magnitude, while keeping the source-QD tunnel coupling constant. The break junction device can therefore become a powerful platform to study the physical parameters that are crucial to the development of future graphene-based devices, including energy converters and quantum calorimeters., S.C. acknowledges a Marie Skłodowska-Curie Individual Fellowship under grant BioGraphING (ID: 798851) and P.G. acknowledges a Marie Skłodowska-Curie Individual Fellowship under grant TherSpinMol (ID: 748642) from the European Union’s Horizon 2020 research and innovation programme. K.W. and T.T. acknowledge support from the Elemental Strategy Initiative conducted by the MEXT, Japan, and the CREST (JPMJCR15F3), JST. This work was supported by the Graphene Flagship (a European Union’s Horizon 2020 research and innovation programme under grant agreement no. 649953), the Marie Curie ITN MOLESCO, an ERC advanced grant (Mols@Mols no. 240299), and a Spanish MCIU/AEI/FEDER project (PGC2018-094783)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electronics without bridging components

  • García-Suárez, Víctor M.
We propose a new paradigm of electronic devices based only on two electrodes separated by a gap, i.e. without any functional element bridging them. We use a tight-binding model to show that, depending on the type of material of the electrodes and its structure, several electronic functionalities can be achieved: ohmic behaviour, rectification, negative differential resistance, spin-filtering and magnetoresistance. In particular, we show that it is possible to deliver a given functionality by changing the coupling between the surface and bulk states and between the surface states across the gap, which dramatically changes the current-voltage characteristics. These results prove that it is possible to have functional electronic and spintronic elements on the nanoscale without having physical components bridging the electrodes., The research presented here was funded by the Spanish Ministerio de Economía y Competitividad through the project FIS2015-63918-R and by the Spanish Ministerio de Ciencia, Innovación y Universidades through the project PGC2018-094783-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Validity of the on-site spin-orbit coupling approximation

  • Cuadrado, Ramón
  • Robles, Roberto
  • García Arribas, Alberto
  • Pruneda, Miguel
  • Ordejón, Pablo
  • Ferrer, Jaime
  • Cerdá, Jorge I.
Spin-orbit coupling (SOC) is generally understood as a highly localized interaction within each atom, whereby core electrons holding large J splittings transfer the SOC to the valence electrons of the same atom, while their direct impact on neighbor valence orbitals is usually small. Seivane and Ferrer [Phys. Rev. Lett. 99, 183401 (2007)PRLTAO0031-900710.1103/PhysRevLett.99.183401] proposed an approach within a tight-binding type ab initio framework assuming that the transfer of SOC from core to valence orbitals only takes place when both are on the same atom, leading to the so-called on-site approximation, which then has been successfully applied to a variety of systems. In this work we thoroughly test its general validity by confronting SOC related properties such as spin splittings, spin textures, or magnetic anisotropies calculated under the on-site approximation versus the more general approach where all the contributions to the SOC, including three-center integrals, are explicitly included. After considering a variety of systems with different dimensionalities, all presenting a strong SOC, we conclude that although the on-site approximation often provides accurate results, it breaks down in some systems where 5d electrons are close to the Fermi level due to their strong SOC and moderately large spatial extension. Furthermore, there are a few examples where subtle inaccuracies lead to qualitatively wrong conclusions, the most clear case being the doping of the topological surface state in Bi2Se3(0001). Finally, magnetic anisotropy energies calculated under this approximation tend to be underestimated., This work was financially supported by the Spanish MINECO, MICIU, AEI, and EU FEDER (Grants No. MAT2015-66888-C3-1R, No. RTI2018-097895-B-C41, No. PGC2018-094783, No. PGC2018-096955-C43, and No. PGC2018-096955-C44), Generalitat de Catalunya (Grant No. 2017SGR1506), and the EU MaX Center of Excellence (EU-H2020 Grant No. 824143). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and the CERCA Program of Generalitat de Catalunya. ICMAB is supported by the Spanish MICINN through the Severo Ochoa Centers of Excellence Program (Grant No. CEX2019-000917-S). R.C. acknowledges the funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodoswka-Curie Grant Agreement No. 665919., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Impurity adsorption on the electronic and transport properties of graphene nanogaps

  • Álvarez-Rodríguez, Pablo
  • García-Suárez, Víctor M.
This article belongs to the Special Issue Organic Materials for Electronic and Optoelectronic Applications, Graphene stands out as a versatile material with several uses in fields that range from electronics to biology. In particular, graphene has been proposed as an electrode in molecular electronics devices that are expected to be more stable and reproducible than typical ones based on metallic electrodes. In this work, we study by means of first principles, simulations and a tight-binding model the electronic and transport properties of graphene nanogaps with straight edges and different passivating atoms: Hydrogen or elements of the second row of the periodic table (boron, carbon, nitrogen, oxygen, and fluoride). We use the tight-binding model to reproduce the main ab-initio results and elucidate the physics behind the transport properties. We observe clear patterns that emerge in the conductance and the current as one moves from boron to fluoride. In particular, we find that the conductance decreases and the tunneling decaying factor increases from the former to the latter. We explain these trends in terms of the size of the atom and its onsite energy. We also find a similar pattern for the current, which is ohmic and smooth in general. However, when the size of the simulation cell is the smallest one along the direction perpendicular to the transport direction, we obtain highly non-linear behavior with negative differential resistance. This interesting and surprising behavior can be explained by taking into account the presence of Fano resonances and other interference effects, which emerge due to couplings to side atoms at the edges and other couplings across the gap. Such features enter the bias window as the bias increases and strongly affect the current, giving rise to the non-linear evolution. As a whole, these results can be used as a template to understand the transport properties of straight graphene nanogaps and similar systems and distinguish the presence of different elements in the junction., This research was funded by the Spanish Ministerio de Ciencia, Innovación y Universidades through the project PGC2018-094783-B-I00., Peer reviewed, .
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin-crossover in supramolecular iron(II)–2,6-bis(1H-pyrazol-1-yl)pyridine complexes: Toward spin-state switchable single-molecule junctions

  • Kumar Kuppusamy, Senthil
  • Mizuto, Asano
  • García-Fuente, Amador
  • Poel, Sebastiaan van der
  • Heinrich, Benoît
  • Ferrer, Jaime
  • Zant, Herre S. J. van der
  • Ruben, Mario
Spin-crossover (SCO) active iron(II) complexes are an integral class of switchable and bistable molecular materials. Spin-state switching properties of the SCO complexes have been studied in the bulk and single-molecule levels to progress toward fabricating molecule-based switching and memory elements. Supramolecular SCO complexes featuring anchoring groups for metallic electrodes, for example, gold (Au), are ideal candidates to study spin-state switching at the single-molecule level. In this study, we report on the spin-state switching characteristics of supramolecular iron(II) complexes 1 and 2 composed of functional 4-([2,2′-bithiophen]-5-ylethynyl)-2,6-di(1H-pyrazol-1-yl)pyridine (L1) and 4-(2-(5-(5-hexylthiophen-2-yl)thiophen-2-yl)ethynyl)-2,6-di(1H-pyrazol-1-yl)pyridine (L2) ligands, respectively. Density functional theory (DFT) studies revealed stretching-induced spin-state switching in a molecular junction composed of complex 1, taken as a representative example, and gold electrodes. Single-molecule conductance traces revealed the unfavorable orientation of the complexes in the junctions to demonstrate the spin-state dependence of the conductance., Grant Agency Innovation FRC is acknowledged for the financial support for the project Self-assembly of spin-crossover (SCO) complexes on graphene. M.R. thanks the DFG priority program 1928 “COORNETS” for generous support. A.M. acknowledges the Alexander von Humboldt (AvH) Foundation for a postdoctoral fellowship. The research of A.G.-F. and J.F. was funded by project PGC2018-094783 (MCIU/AEI/FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrically driven singlet-triplet transition in triangulene spin-1 chains

  • Martínez-Carracedo, Gabriel
  • Oroszlány, László
  • García-Fuente, Amador
  • Szunyogh, László
  • Ferrer, Jaime
Recently, graphene triangulene chains have been synthesized, and their magnetic response has been analyzed by scanning tunneling microscopy methods by Mishra et al. [Nature (London) 598, 287 (2021)]. Motivated by this study, we determine the exchange bilinear and biquadratic constants of the triangulene chains by calculating two-spin rotations in the spirit of the magnetic force theorem. We then analyze open-ended, odd-numbered chains, whose edge states pair up forming a triplet ground state. We propose three experimental approaches that enable us to trigger and control a singlet-triplet spin transition. Two of these methods are based on applying a mechanical distortion to the chain. We finally show that the transition can be controlled efficiently by the application of an electric field., G.M.-C., A.G.-F., and J.F. have been funded by Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional, via Grant No. PGC2018-094783. G.M.-C. has also been supported by Programa “Severo Ochoa” de Ayudas para la investigación y docencia del Principado de Asturias. G.M.-C. acknowledges the financial support and hospitality of the Wigner Research Centre for Physics. This research is supported by the NRDI Office through Research Grants No. K131938, No. K142179, and No. FK124723 and within the Quantum Information National Laboratory of Hungary by the Ministry of Culture and Innovation and the National Research, Development and Innovation Office via Grant No. 2022-2.1.1-NL-2022-00004. L.O. also acknowledges the support of the NRDI Office of Hungary and the Hungarian Academy of Sciences through the Bolyai and Bolyai+ scholarships., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Full analytical solution of finite-length armchair/zigzag nanoribbons

  • García-Fuente, Amador
  • Carrascal, Diego
  • Ross, Gal
  • Ferrer, Jaime
Finite-length armchair graphene nanoribbons can behave as one-dimensional topological materials, that may show edge states in their zigzag-terminated edges, depending on their width and termination. We show here a full solution of tight-binding graphene rectangles of any length and width that can be seen as either finite-length armchair or zigzag ribbons. We find exact analytical expressions for both bulk and edge eigenstates and eigenenergies. We write down exact expressions for the Coulomb interactions among edge states and introduce a Hubbard-dimer model to analyze the emergence and features of different magnetic states at the edges, whose existence depends on the ribbon length. We find ample room for experimental testing of our predictions in N=5 armchair ribbons. We compare the analytical results with ab initio simulations to benchmark the quality of the dimer model and to set its parameters. A further detailed analysis of the ab initio Hamiltonian allows us to identify those variations of the tight-binding parameters that affect the topological properties of the ribbons., The research carried out in this paper was funded by project PGC2018-094783 (MCIU/AEI/FEDER, EU) and by Asturias FICYT under Grant No. AYUD/2021/51185 with the support of FEDER funds. G.R. received support from a GEFES scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed microscopic Eu2+ occupancies in the next-generation red LED Phosphor Sr[Li2Al2O2N2]:Eu2+ (SALON:Eu2+)

  • Ruegenberg, Freia
  • García-Fuente, Amador
  • Seibald, Markus
  • Baumann, Dominik
  • Hoerder, Gregor
  • Fiedler, Tim
  • Urland, Werner
  • Huppertz, Hubert
  • Meijerink, Andries
  • Suta, Markus
Red-emitting narrow-band phosphors are of utmost importance for next-generation white-light phosphor-converted light-emitting diodes (pc-wLEDs) for improved efficacy and optimized correlated color temperatures. A promising representative crystallizing in an ordered variant of the UCr4C4 structure type is Sr[Li2Al2O2N2]:Eu2+ (SALON:Eu2+) emitting at a desirable wavelength of 614 nm. Despite an expected eightfold coordination of the Eu2+ ions by four N3− and O2− ions, respectively, the exact local coordination symmetry and a 1:1 ratio between the two types of ligands is not straightforwardly proven by X-ray diffraction. Low-temperature luminescence spectroscopy in conjunction with ligand field theory are powerful alternatives to resolve local features of Eu2+ as its excited 4f65d1 configuration reacts sensitively to the polarity of the ligands. The dominant emission at 614 nm shows pronounced vibronic fine structure at 10 K. In addition, weak emission bands can be resolved at 570 and 650 nm even at a low doping concentration of 0.5 mol% and are assigned to Eu2+ ions being eightfold coordinated by N3− and O2− ions in a ratio different from 1:1. Due to the feature of vierer ring-type channels in SALON:Eu2+, those Eu2+ centers are sufficiently close for mutual energy transfer, which is characterized by time-resolved luminescence at 10 K., M.S. is grateful for a material cost allowance from the Fonds der Chemischen Industrie e.V. and funding from the "Junges Kolleg" of the North-Rhine Westphalian Academy of Sciences and Arts. A.G.-F. acknowledges funding of the project PGC2018-094783 (MCIU/AEI/FEDER, EU) and Asturias FICYT under grant AYUD/2021/51185 with the support of FEDER funds. Parts of this work are funded by the German Federal Ministry of Economic Affairs and Climate Action (Bundesministerium für Wirtschaft und Klimaschutz) in the frame of the Important Project of Common European Interest (IPCEI) on microelectronics., Open access funding enabled and organized by Projekt DEAL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Defect-induced transport enhancement in carbon-boron nitride-carbon heteronanotube junctions

  • Algharagholy, Laith A.
  • García-Suárez, Víctor M.
New heteromaterials, particularly those involving nanoscale elements such as nanotubes, have opened a wide window for the next generation of materials and devices. Here, we perform density functional theory (DFT) simulations combined with a Green’s function (GF) scattering approach to investigate the electronic transport properties of defective heteronanotube junctions (hNTJs) made of (6,6) carbon nanotubes (CNT) with a boron nitride nanotube (BNNT) as scatterer. We used the sculpturene method to form different heteronanotube junctions with various types of defects in the boron nitride part. Our results show that the defects and the curvature induced by them have a nontrivial impact on the transport properties and, interestingly, lead to an increase of the conductance of the heteronanotube junctions compared to the free-defect junction. We also show that narrowing the BNNTs region leads to a large decrease of the conductance, an effect that is opposite to that of the defects., Laith A. Algharagholey acknowledges the Iraqi Ministry of Higher Education and Scientific Research and University of Sumer for the support. V. M. García-Suárez thanks the Spanish Ministerio de Ciencia, Innovación y Universidades for funding through the project PGC2018-094783–B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric response enhanced by surface/edge states in physical nanogaps

  • García-Suárez, Víctor M.
This article belongs to the Special Issue New Advances in Nanomaterials., Current solid-state thermoelectric converters have poor performance, which typically renders them useless for practical applications. This problem is evidenced by the small figures of merit of typical thermoelectric materials, which tend to be much smaller than 1. Increasing this parameter is then key for the development of functional devices in technologically viable applications that can work optimally. We propose here a feasible and effective design of new thermoelectric systems based on physical gaps in nanoscale junctions. We show that, depending on the type of features, i.e., the character of surface/edge states, on both sides of the gap, it is possible to achieve high figures of merit. In particular, we show that, for configurations that have localized states at the surfaces/edges, which translate into sharp resonances in the transmission, it is possible to achieve large Seebeck coefficients and figures of merit by carefully tuning their energy and their coupling to other states. We calculate the thermoelectric coefficients as a function of different parameters and find non-obvious behaviors, such as the existence of a certain coupling between the localized and bulk states for which these quantities have a maximum. The highest Seebeck coefficients and figures of merit are achieved for symmetric junctions, which have the same coupling between the localized state and the bulk states on both sides of the gap. The features and trends of the thermoelectric properties and their changes with various parameters that we find here can be applied not only to systems with nanogaps but also to many other nanoscale junctions, such as those that have surface states or states localized near the contacts between the nanoscale object and the electrodes. The model presented here can, therefore, be used to characterize and predict the thermoelectric properties of many different nanoscale junctions and can also serve as a guide for studying other systems. These results pave the way for the design and fabrication of stable next-generation thermoelectric devices with robust features and improved performance., This research was funded by the Spanish Ministerio de Ciencia, Innovación y Universidades through the project PGC2018-094783-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Relativistic magnetic interactions from nonorthogonal basis sets

  • Martínez-Carracedo, Gabriel
  • Oroszlány, László
  • García-Fuente, Amador
  • Nyári, Bendegúz
  • Udvardi, László
  • Szunyogh, László
  • Ferrer, Jaime
We propose a method to determine the magnetic exchange interaction and onsite anisotropy tensors of extended Heisenberg spin models from density functional theory including relativistic effects. The method is based on the Liechtenstein-Katsnelson-Antropov-Gubanov torque formalism, whereby energy variations upon infinitesimal rotations are performed. We assume that the Kohn-Sham Hamiltonian is expanded in a nonorthogonal basis set of pseudoatomic orbitals. We define local operators that are both Hermitian and satisfy relevant sum rules. We demonstrate that in the presence of spin-orbit coupling a correct mapping from the density functional total energy to a spin model that relies on the rotation of the exchange field part of the Hamiltonian can not be accounted for by transforming the full Hamiltonian. We derive a set of sum rules that pose stringent validity tests on any specific calculation. We showcase the flexibility and accuracy of the method by computing the exchange and anisotropy tensors of both well-studied magnetic nanostructures and of recently synthesized two-dimensional magnets. Specifically, we benchmark our approach against the established Korringa-Kohn-Rostoker Green's function method and show that they agree well. Finally, we demonstrate how the application of biaxial strain on the two-dimensional magnet T−CrTe2 can trigger a magnetic phase transition., G. M.-C., A. G.-F. and J. F. have been funded by Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional via the Grants No. PGC2018-094783 and No. PID2022-137078NB-I00, and by Asturias FICYT under Grant No. AYUD/2021/51185 with the support of FEDER funds. G.M.-C. has been supported by Programa “Severo Ochoa” de Ayudas para la investigación y docencia del Principado de Asturias. He also acknowledges the financial support and hospitality of the Wigner Research Centre for Physics. This work was supported by the Ministry of Culture and Innovation and the National Research, Development and Innovation Office within the Quantum Information National Laboratory of Hungary (Grant No. 2022-2.1.1-NL-2022-00004) and Projects K133827, K131938, K142179. We thank the Frontline – Research Excellence Programme of the NRDIO, Grant No. KKP133827. L.O. acknowledges the support of the Bolyai Research Scholarship of MTA and the Bolyai Plusz Scholarship of ÚNKP. This project has received funding from the HUN-REN Hungarian Research Network., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards nanotube-based sensors for discrimination of drug molecules

  • Algharagholy, Laith A.
  • García-Suárez, Víctor M.
  • Albeydani, Ohood Abdullah
  • Alqahtanid, Jehan
The proper detection of drug molecules is key for applications that have an impact in several fields, ranging from medical treatments to industrial applications. In case of illegal drugs, their correct and fast detection has important implications that affect different parts of society such as security or public health. Here we present a method based on nanoscale sensors made of carbon nanotubes modified with dopants that can detect three types of drug molecules: mephedrone, methamphetamine and heroin. We show that each molecule produces a distinctive feature in the density of states that can be used to detect it and distinguish it from other types of molecules. In particular, we show that for semiconducting nanotubes the inclusion of molecules reduces the gap around the Fermi energy and produces peaks in the density of states below the Fermi energy at positions that are different for each molecule. These results prove that it is possible to design nanoscale sensors based on carbon nanotubes tailored with dopants, in such a way that they might be able to discriminate between different types of compounds and, especially, drug molecules whose proper recognition has important consequences in different fields., Laith A. Algharagholy acknowledges the Iraqi Ministry of Higher Education and Scientific Research and University of Sumer for the support. V. M. García-Suárez acknowledges funding from the project PGC2018-094783 (MCIU/AEI/FEDER, EU). Ohood Abdullah Albeydani and Jehan Alqahtani acknowledge Taibah University and King Khalid University, Saudi Arabia, for the support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning magnetic exchange interactions in two-dimensional magnets: The case of CrGeX3 (X = Se, Te) and Janus Cr2 Ge2 (Se,Te) 3 monolayers

  • Martínez-Carracedo, Gabriel
  • García-Fuente, Amador
  • Oroszlány, László
  • Szunyogh, László
  • Ferrer, Jaime
We present a computational study to explore the potential of different experimental approaches to tune the magnetic interactions in two-dimensional van der Waals magnets. We selected CrGeSe3, CrGeTe3, and Janus Cr2⁢Ge2⁢(Se,Te)3 monolayers as case studies and calculated the full exchange tensors among all relevant atomic pairs and analyze their dependence on different external parameters, such as biaxial and uniaxial strain, as well as gate voltage. We focus particularly on interactions that emerge or vanish due to changes in the system's symmetry, especially under uniaxial strain and gate voltage. We find that biaxial and uniaxial strains significantly modify isotropic exchange couplings, which can lead to a transition from a ferromagnetic to an antiferromagnetic phase, while a gate voltage induces Dzyaloshinskii–Moriya interactions, forming a vortex pattern whose chirality is determined by the sign of the electric field. The electric dipole moment of the Janus material is large, raising the possibility of multiferroic behavior. The polarizability is similar for the three compounds., G.M.-C., A.G.-F., and J.F. have been funded by Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional via Grants No. PGC2018-094783 and No. PID2022-137078NB-I00, and by Asturias FICYT under Grant No. AYUD/2021/51185 with the support of FEDER funds. G.M.-C. has been supported by Programa “Severo Ochoa” de Ayudas para la investigación y docencia del Principado de Asturias. This paper was supported by the Ministry of Culture and Innovation and the National Research, Development and Innovation Office within the Quantum Information National Laboratory of Hungary (Grant No. 2022-2.1.1-NL-2022-00004) and Projects No. K131938 and No. K142179. We thank the Frontline Research Excellence Programme of the NRDIO, Grant No. KKP133827. This project has received funding from the HUN-REN Hungarian Research Network. This project is supported by the TRILMAX Horizon Europe consortium (Grant No. 101159646)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective sensing of DNA nucleobases with angular discrimination

  • Algharagholy, Laith A.
  • García-Suárez, Víctor M.
  • Abaas, Sawsan S.
The fast and precise selective sensing of DNA nucleobases is a long-pursued method that can lead to huge advances in the field of genomics and have an impact on aspects such as the prevention of diseases, health enhancement, and, in general, all types of medical treatments. We present here a new type of nanoscale sensor based on carbon nanotubes with a specific geometry that can discriminate the type of nucleobase and also its angle of orientation. The proper differentiation of nucleobases is essential to clearly sequence DNA chains, while angular discrimination is key to improving the sensing selectivity. We perform first-principle and quantum transport simulations to calculate the transmission, conductance, and current of the nanotube-based nanoscale sensor in the presence of the four nucleotides (A, C, G, and T), each of them rotated 0, 90, 180, or 270°. Our results show that this system is able to effectively discriminate between the four nucleotides and their angle of orientation. We explain these findings in terms of the interaction between the phosphate group of the nucleotide and the nanotube wall. The phosphate specifically distorts the electronic structure of the nanotube depending on the distance and the orientation and leads to nontrivial changes in the transmission. This work provides a method for finer and more precise sequential DNA chains., L.A.A. acknowledges the Iraqi Ministry of Higher Education and Scientific Research and the University of Sumer for the support, and S.S.A. acknowledges the Iraqi Ministry of Education for the support. V.M.G.-S. acknowledges funding from the project PGC2018-094783 (MCIU/AEI/FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene-based quantum heterospin graphs

  • Martínez-Carracedo, Gabriel
  • García-Fuente, Amador
  • Oroszlány, László
  • Szunyogh, László
  • Ferrer, Jaime
The data are available from the authors upon reasonable request., We investigate from first principles a variety of low-dimensional open quantum spin systems based on magnetic nanographene structures that contain spin-1/2 and spin-1 triangulenes and/or olympicenes. These graphene nanostructures behave as localized spins and can be effectively described by a quantum bilinear-biquadratic Heisenberg Hamiltonian, for which we will compute the energy spectrum and the quantum numbers associated with the low-energy eigenstates. We propose the experimental realization of antiferromagnetic alternating spin chains using these graphene nanostructures, which result in ferrimagnetic systems whose ground state spin and degeneracy depend on the length of the chain. We identify a double degeneracy in the total spin quantum number 𝑆 of the first excited state in three-leg spin graphs (3-LSGs) and other heterospin nanostructures, which depends on both the number of sites and the spin species, and originates from the swapping transformation symmetry of the Hamiltonian. Numerical simulations indicate that this degeneracy remains largely robust for 𝑁=7 spin-1 3-LSGs under realistic perturbations present in experimental conditions., G.M.-C., A.G.-F. and J.F. have been funded by Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional via the Grants No. PGC2018-094783 and No. PID2022-137078NB-I00, and by Asturias FICYT under Grant No. AYUD/2021/51185 and by Agencia SEKUENS (Asturias) under Grant No. UONANO IDE/2024/000678 with the support of FEDER funds. G.M.-C. has been supported by Programa Severo Ochoa de Ayudas para la Investigación y Docencia del Principado de Asturias. This work was supported by the Ministry of Culture and Innovation and the National Research, Development and Innovation Office within the Quantum Information National Laboratory of Hungary (Grant No. 2022-2.1.1-NL-2022-00004) and Projects No. K131938 and No. K142179 ADVANCED 149745. We thank the Frontline Research Excellence Programme of the NRDIO, Grant No. KKP133827. This project has received funding from the HUN-REN Hungarian Research Network. This project is supported by the TRILMAX Horizon Europe Consortium (Grant No. 101159646)., Peer reviewed