Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of sugar cane straw ash (SCSA) as pozzolanic material in blended portland cement: Microstructural characterization of pastes and mechanical strength of mortars

  • Moraes, J. C. B
  • Akasaki, Jorge Luis
  • Melges, J. L. P.
  • Tashima, Mauro Mitsuuchi
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
The aim of this paper is to assess the pozzolanic reactivity of sugar cane straw ash (SCSA) obtained through an auto-combustion process and the mechanical properties of SCSA-containing systems. Characterization of SCSA (X-ray diffraction, chemical composition, particle size, and microscopy) and reactivity studies on hydrated lime/SCSA and Portland cement/SCSA pastes through infrared spectroscopy, thermogravimetric analysis, and microscopy demonstrated the high pozzolanic activity. This reactivity made it possible to achieve good mechanical properties in mortars in which 15 30% of the cement was replaced by SCSA. After 90 days of curing, the SCSA fixed 100% of the lime present in lime/SCSA pastes, and the compressive strength of mortars containing SCSA reached 44 MPa, a value similar to those found for control mortars after the same number of curing days. The results for the microstructural and mechanical properties showed that SCSA is a good pozzolanic material., The authors would like to thank CNPq-Brazil (process no 401724/2013-1) and the Ministerio de Educacion, Cultura y Deporte of Spain (the Cooperacion Interuniversitaria program with Brazil: PHB-2011-0016-PC). We also thank CAPES-Brazil for the Grant for J.C.B. Moraes and Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the binary system fly ash/sugarcane bagasse ash (FA/SCBA) in SiO2/K2O alkali-activated binders

  • CASTALDELLI, V.N.
  • Moraes, J.C.B
  • Akasaki, Jorge Luis
  • Pinheiro Melges, Jose Luis
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
Due environmental problems related to Portland cement consumption, many studies have been performed to diminish its use. One solution is the development of alkali-activated binders, which can decrease CO2 emissions and energy consumption by 70% when compared to Portland cement production. In addition, an alkali-activated binder presents mechanical properties similar to Portland cement mixtures, which turns into an interesting material in civil construction. Aluminosilicate-based materials are important raw materials to produce the alkali-activated binders. Therefore, two residues are presented as an aluminosilicate source in this study: fly ash (FA) and sugarcane bagasse ash (SCBA). Both residues were obtained from a combustion process to generate energy, the former from coal and the latter from the bagasse of the sugarcane industry. In addition, the alkaline activating solution is an important factor to achieve improved mechanical properties. In this context, this study investigated the influence of four different SiO2/K2O molar ratios (0, 0.36, 0.75 and 1.22) in the activating solution with a constant water content, and three FA/SCBA binder proportions (75/25, 50/50 and 25/75). Microstructural characterization was carried out by X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, mercury intrusion porosimetry, pH and electrical conductivity measurements to study the evolution of the reaction process. The compressive strength of mortars was assessed in order to determine the optimum SiO2/K2O molar ratio and FA/SCBA ratio. The tests showed that a SiO2/K2O molar ratio of 0.75 and FA/SCBA proportion of 75/25 provided the best mechanical properties., The authors would like to thank the Ministerio de Educacion, Cultura y Deporte of Spain (Cooperacion Interuniversitaria program with Brazil, Project PHB-2011-0016-PC), CAPES Brazil (Project CAPES/DGU No. 266/12) and CNPq (process no 401724/2013-1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimum use of sugar cane straw ash (SCSA) in alkali-activated binders based on blast furnace slag (BFS)

  • Moraes, J.C.B
  • Melges, J.L.P.
  • Akasaki, J.L.
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] Alkali-activated binders (AABs) are a material obtained from the combination of a solid precursor and an alkaline activating solution. In this study, one solid precursor used was blast-furnace slag (BFS) and the other was an agro waste: sugar cane straw ash (SCSA). Sodium hydroxide was used for preparing activating solutions. In order to reach the potential reactivity of the SCSA, a study varying the BFS/SCSA mass ratio and H2O=Na2O molar ratio was carried out. The BFS/SCSA ratio varied from 100=0 to 70=30, and H2O=Na2O was studied in the range of 11.1¿18.5. To fulfill this objective, specimens were assessed by their compressive strength of mortars and microstructural studies of pastes [X-ray diffraction (XRD); thermogravimetric analysis (TGA); Fourier transform infrared spectroscopy (FTIR); and field emission scanning electron microscopy (FESEM)] in the curing time range of 3¿90 days at 25°C. Results from these tests showed that the best BFS/SCSA and H2O=Na2O ratios were 70=30 and 18.5, respectively. This study revealed an interesting valorization of the SCSA as a complementary precursor in BFS-based AABs because of the improvement of mechanical properties and the reduction in the consumption of BFS in AAB, The authors would like to thank CNPq processo n° 401724/2013-1, CNPq processo n° 140779/2015-0, and the Ministerio de Educación, Cultura y Deporte of Spain ( Cooperación Interuniversitaria program with Brazil PHB-2011-0016-PC). Thanks are also given to the Electron Microscopy Service of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Increasing the sustainability of alkali-activated binders: The use of sugar cane straw ash (SCSA)

  • Moraes, J.C.B
  • Akasaki, Jorge Luis
  • Pinheiro Melges, Jose Luis
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
Alkali-activated binders are the new trend in building construction studies due their good mechanical properties and environmental advantages. These type of binders are obtained by a mixing of a solid precursor with an activating solution. In this study, the influence of sugar cane straw ash (SCSA) obtained from an auto-combustion process on blast-furnace slag (BFS) based alkali-activated binders was assessed as solid precursor. The studied proportions of BFS/SCSA were 100/0 (control), 85/15, 75/25, 67/33 and 50/50 (by mass). Regarding to the activating solutions, three different mixtures were used: only NaOH (8 mol kg1 Na+ ) and two different combinations of NaOH with sodium silicate (8 mol kg1 Na+ and SiO2/Na2O molar ratios of 0.50 and 0.75). The water/binder was maintained constant. To assess the influence of SCSA on BFS-alkali activated binders, mortars were evaluated in terms of compressive strength (3 90 days curing time at room temperature and 3 days at 65 C); and pastes were studied to justify these results by means of thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FESEM). The presence of SCSA in the binder greatly improved the compressive strength when compared to the control BFS mortars, reaching values higher than 50 MPa after 90 days. SCSA/BFS samples activated with sodium hydroxide yielded similar compressive strength values to those obtained for BFS mortars activated with sodium silicate. In the new binders, the partial replacement of BFS, the total replacement of sodium silicate solution and a new way of valorizing sugar cane straw enhanced sustainability., The authors would like to thanks to CNPq processo no. 401724/2013-1 and the "Ministerio de Education, Cultura y Deporte" of Spain ("Cooperacion Interuniversitaria" program with Brazil PHB-2011-0016-PC). Thanks are also given to the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of slag/sugar cane bagasse ash (SCBA) blends in the production of Alkali-activated materials

  • Castaldelli, V.N.
  • Akasaki, Jorge Luis
  • Melges, J.L.P.
  • Tashima, Mauro Mitsuuchi
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
Blast furnace slag (BFS)/sugar cane bagasse ash (SCBA) blends were assessed for the production of alkali-activated pastes and mortars. SCBA was collected from a lagoon in which wastes from a sugar cane industry were poured. After previous dry and grinding processes, SCBA was chemically characterized: it had a large percentage of organic matter (ca. 25%). Solutions of sodium hydroxide and sodium silicate were used as activating reagents. Different BFS/SCBA mixtures were studied, replacing part of the BFS by SCBA from 0 to 40% by weight. The mechanical strength of mortar was measured, obtaining values about 60 MPa of compressive strength for BFS/SCBA systems after 270 days of curing at 20 °C. Also, microstructural properties were assessed by means of SEM, TGA, XRD, pH, electrical conductivity, FTIR spectroscopy and MIP. Results showed a good stability of matrices developed by means of alkali-activation. It was demonstrated that sugar cane bagasse ash is an interesting source for preparing alkali-activated binders., Authors would like to thanks to "Ministerio de Educacion, Cultura y Deporte" of Spain ("Cooperacion Interuniversitaria" program with Brazil, Project PHB-2011-0016-PC), PPEGC program-UNESP "Universidade Estadual Paulista Julio de Mesquita Filho" Pro Reitoria de Pesquisa da UNESP, FUNDUNESP and CAPES-Brazil (Project CAPES/DGU No. 266/12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Utillizacion de la ceniza de paja de caña de azúcar (CPC) como puzolana en sustituciones parciales del cemento portland, Utilisation of sugar cane straw ash (SCSA) as pozzolan in partially replacement of Portland cement

  • Moraes, J.C.B.
  • Akasaki, J.L.
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[ES] La producción de caña de azúcar en Brasil ha aumentado considerablemente en los últimos 10 años. Después del proceso de cosecha mecanizada, se genera un residuo llamado paja de caña de azúcar. Esta paja tiene un buen poder calorífico y puede ser utilizada para generar energía como una biomasa. Sin embargo, después de este proceso de generación de energía se obtiene otro residuo, el cual no tiene un destino adecuado, llamado ceniza de la paja de caña de azúcar (CPC). Una destinación para este residuo es su valorización como un material puzolánico. Para ello, la CPC ha sido caracterizada físicamente y químicamente. La ceniza ha presentado cantidad de sílice amorfa que puede ser utilizada como una puzolana sustituyendo parcialmente el cemento Portland. La reactividad de la ceniza ha sido evaluada por el ensayo de termogravimetría (TGA) en pastas de cal y puzolana. También fueron estudiadas cinco sustituciones del cemento Portland por CPC en morteros: 0 (control), 15, 20, 25 y 30%. En este estudio se prepararon probetas para romper a ensayos de resistencia a compresión en las edades de 3, 7, 28 y 90 días después de un curado a 25 ºC en atmósfera húmeda. Los datos mostraron que la CPC reacciona con la cal y presenta una importante contribución para la resistencia mecánica. Todos los morteros presentaron resistencias a compresión similares después de 90 días de aproximadamente 45 MPa. La conclusión de este trabajo es que esta ceniza CPC puede ser utilizada sustituyendo parcialmente el cemento Portland., [EN] Sugarcane production in Brazil considerably increased in the last 10 years. After the mechanized harvesting, it is generated a waste called by sugar cane straw. This straw presents good calorific value and it can be utilised in energy production as a biomass. However, after the energy generation, it is obtained another waste, which does not have a suitable destination, known as the sugar cane straw ash (SCSA). A destination to this material can be as pozzolanic material. Therefore, the SCSA was physically and chemically characterised. The ash presented amorphous silica that can be used in partial replacement of the Port land cement. The ash reactivity was assessed by thermogravimetric analysis (TGA) of lime/pozzolan pastes. Also five replacement percentages of the Portland cement by SCSA in mortars were evaluated: 0 (control), 15, 20, 25 and 30%. Specimens were moulded in order to be assessed by compressive strength after 3, 7, 28 and 90 days of curing at 25 ºC. All mortars presented similar compressive strength after 90 days of curing of approximately 45 MPa. It can be concluded that the SCSA can be used in partial replac ement of the Portland cement., Los autores desean agradecer al CNPq Brasil por la beca del primer autor, J.C.B. Moraes (proceso 153164/2016-6), y al proceso 401724/2013-1. También al Ministerio de Educación, Cultura y Deporte de España (Cooperación Interuniversitaria con Brasil, proyecto PHB-2011-0016-PC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pozzolanic reactivity studies on a miomass-derived waste from sugar cane production: sugar cane straw ash (SCSA)

  • Moraes, J.C.B
  • Melges, J. L. P.
  • Akasaki, Jorge Luis
  • Tashima, M. M.
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
Biomass has gained in importance as an energy source in recent years. One of the crops that presents interesting opportunities with regard to biomass is sugar cane. In Brazil, sugar cane production is increasing for alcohol and sugar manufacture. Some by-products, such as sugar cane straw, also are obtained during harvesting. Due the calorific value of the sugar cane straw, its use as biomass is increasing. After the straw is burned to produce energy, an ash is obtained: sugar cane straw ash (SCSA). This waste needs an appropriate destination and, since the recent publication of successful studies using biomass derived-ashes as pozzolanic material, the present study aimed to assess the pozzolanic reactivity of sugar cane straw ash. The pozzolanic activity was assessed using a new and simple recently proposed method: evaluation of the electrical conductivity of calcium hydroxide (CH) and pozzolan suspensions, in which solid CH is initially present. These results were compared to those of two other well-established techniques: Fourier transformed infrared spectroscopy and thermogravimetric analysis. The evaluation by all three techniques is similar and shows that sugar cane straw ash is a good pozzolanic material: high lime fixation values for CH:SCSA mixes were determined by thermogravimetric analysis and unsaturation respect to CH in 3.5:6.5 CH:SCSA suspension was achieved at 60ºC. According to this behaviour, a bright future for SCSA as a replacement for Portland cement is expected., We thank CNPq (processo no. 401724/2013-1) and the "Ministerio de Education, Cultura y Deporte" of Spain ("Cooperacion Interuniversitaria" program with Brazil PHB-2011-0016-PC). Thanks are also due to the Electron Microscopy Service of the Universitat Politecnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Durability to chemical attacks and life cycle assessment of alkali-activated binders based on blast furnace slag and sugar cane straw ash

  • Moraes, J.C.B.
  • Batista, J.P.B.
  • Moraes, M.J.B.
  • Gavioli, L.M.
  • Akasaki, J.L.
  • Font, A.
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] Alkali-activated binder (AAB) is a new material that is being researched as an alternative to the use of Portland cement due to technical and environmental advantages. However, further studies on the durability and environmental impacts of this kind of binder are required to confirm its potential. Therefore, in this work, the durability to chemical attacks and life cycle assessment (LCA) of alkali-activated binders composed of blast furnace slag (BFS) and sugar cane straw ash (SCSA) with BFS/SCSA mass ratios of 100/0 and 75/25 were studied. AAB samples were pro duced with a solution composed of only NaOH (Na+ concentration of 4 mol kg¿ 1). Portland cement (PC) samples were also produced to compare with AAB samples. For the durability study, the samples were maintained in five different environments to perform durability attacks: sodium sulphate, hydrochloric acid, acetic acid, ammonium chloride, and deionised water. Additionally, unattacked samples were left in a wet room as a reference environment. The compressive strength variation, mass variation, expansion/shrinkage behaviour, visual analysis after application of phenolphthalein, H+ consumption (only for acetic acid, hydrochloric acid and ammonium chloride attacks), thermogravimetric analysis, and powder X-ray diffraction (only for sodium sulphate attack) tests were carried out to analyse the performance of the samples. Results showed that AAB samples presented better resistance to chemical attacks than PC samples based on compressive strength variation for sodium sulphate (¿ 12.1%), hydrochloric acid (¿ 71.8%), acetic acid (¿ 83.7%), and ammonium chloride (¿ 50.1%). The use of SCSA in AAB was more beneficial under sodium sulphate attack (¿12.1%). Finally LCA results showed that the AAB sample with SCSA yielded lower Climate Change impact in kg of equivalent CO2 per kg of produced mortar (0.153kg CO2-eq). Therefore, the study concludes that using SCSA blended with BFS is a sustainable option to produce AAB., Authors would like to thanks to CNPq Processo n degrees 153164/2016-6 for scholarship to J.C.B. Moraes, CNPq processo n degrees 401724/2013-1 and the "Ministerio de Educacion, Cultura y Deporte" of Spain ("Cooperacion Interuniversitaria" program with Brazil PHB-2011-0016-PC) . Finally, M.M. Tashima wishes to thank the Spanish Ministry of Universities and the Universitat Politecnica de Valencia for the grant "Maria Zambrano for attraction of international talent", funded by European Union-Next Generation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of sugarcane bagasse ash (SCBA) with high quartz content as pozzolanic material in portland cement mixtures

  • Pereira, A.M.
  • Moraes, J.C.B
  • Bassan de Moraes, M.J.B.
  • Akasaki, J.L.
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
[EN] Portland cement (OPC) production is one of the most contaminating greenhouse gas producing activities. In order to reduce OPC consumption, several alternatives are being assessed, and the use of pozzolanic material is one of them. This paper presents study on the reactivity of sugarcane bagasse ash (SCBA), a residue from sugarcane industry, as a pozzolanic material. In order to evaluate SCBA reactivity, it was mixed in pastes with hydrated lime and OPC, which were microstructurally characterised. These studies showed that SCBA presents some pozzolanic characteristics. Studies on mortars in which OPC was replaced by SCBA in the range 10¿30% were also carried out. Replacement in the range 15¿20% yielded the best behaviour in terms of compressive strength. Finally, it can be concluded this ash could be valorised despite its relative low pozzolanic reactivity., [ES] Valorización de la ceniza de bagazo de azúcar (SCBA) con alto contenido de cuarzo como material puzolánico en mezclas de cemento Portland. La producción de cemento Portland (OPC) presenta una elevada emisión de CO2. Con el objeto de reducir el consumo de OPC, se están evaluando algunas alternativas, y el uso de materiales puzolánicos es una de ellas. En este trabajo se presenta el estudio de la reactividad de la ceniza de bagazo de caña de azúcar (SCBA) como material puzolánico, un residuo procedente de la industria de la caña de azúcar. Al objeto de evaluar la reactividad de SCBA, se realizaron pastas con cal hidratada y con OPC, las cuales fueron caracterizadas microestructuralmente. Estos estudios mostraron que SCBA presenta una cierta característica puzolánica. Se llevaron a cabo estudios en morteros en los que OPC se sustituyó por SCBA en el intervalo de 10-30%. La sustitución en el intervalo 15-20% produjo el mejor comportamiento en términos de resistencia a compresión. Finalmente, se puede concluir que esta ceniza puede ser valorizada a pesar de su baja reactividad puzolánica., The authors would like to thank the Ministerio de Educacion, Cultura y Deporte of Spain (Cooperacion Interuniversitaria Program with Brazil, Project PHB-2011-0016-PC), CAPES-Brazil (Project CAPES/DGU No. 266/12), CNPq (Project 401724/2013-1) and Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanical and durability properties of alkali-activated mortar based on sugarcane bagasse ash and blast furnace slag

  • Pereira, Adriana
  • Akasaki, Jorge Luis
  • Melges, José L.P.
  • Mitsuuchi Tashima, Mauro|||0000-0003-0885-9293
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
  • Monzó Balbuena, José Mª|||0000-0002-3657-3076
  • Paya Bernabeu, Jorge Juan|||0000-0001-7425-5311
Sugarcane bagasse is an agricultural waste which can be transformed, for cementing purposes, into an interesting material by combustion. Specifically, the ash (SBA) obtained by auto-combustion was used for preparing alkali-activated cements by blending blast furnace slag (BFS). SBA had a large amount of quartz; however, it reacted in high alkaline medium. Mixtures of BFS/SBA have been used for preparing alkali-activated mortars, by using NaOH (8 M solution), sodium silicate (8 M solution in Na+ and SiO2/Na2O molar ratio of 0.5) and KOH (8 M solution) as activating solutions. Replacements of 25%, 33% and 50% of BFS by SBA were carried out and compressive strengths in the range 16 51 MPa were obtained after 90 curing days. Microstructural studies demonstrated that the hydration products formed in the activation of BFS are not significantly affected by the presence of SBA in the mixture. The durability of alkali-activated mortars was compared to ordinary Portland cement (OPC) mortar in the following media: hydrochloric acid, acetic acid, ammonium chloride, sodium sulphate and magnesium sulphate. The behaviour of alkali-activated mortars with BFS and BFS/SBA was better than that found for plain OPC mortars, especially in ammonium chloride, acetic acid and sodium sulphate media. After 200 days of testing in ammonium chloride solution, the compressive strength loss for Portland cement mortar was about 83.3%. For the same test conditions, alkali-activated mortars presented a maximum reduction of 48.4%. The presence of SBA in alkali-activated BFS mortars did not produce any serious problems in durability. As a general conclusion, sugarcane bagasse ash (SBA) obtained by auto-combustion showed good cementing properties as a mineral precursor blended with blast furnace slag (BFS) in alkali-activated systems., The Authors would like to thank the Ministerio de Educacion, Cultura y Deporte of Spain (Cooperacion Interuniversitaria Program with Brazil, Project PHB-2011-0016-PC), CAPES-Brazil (Project CAPES/DGU No. 266/12), CNPq (Project 401724/2013-1) and Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of sugar cane straw ash in metakaolin-based geopolymers

  • Moraes, J.C.B
  • Moraes, M.J.B.
  • Batista, J.P.B.
  • Akasaki, J.L.
  • Font, A.
  • Tashima, M.M.
  • Payá, J.
  • Soriano Martinez, Lourdes|||0000-0002-5749-4609
  • Borrachero Rosado, María Victoria|||0000-0002-7873-0658
[EN] The present investigation studied the use of agro-industrial waste, sugar cane straw ash (SCSA), to partially replace commercial metakaolin (MK) in geopolymers (0 %, 15 %, 30 %, and 45 % percentages of substitution by mass). The study presented solid precursors characterization, microstructural studies of pastes, and compressive strength of mortars assessed between 1 and 90 days of curing at 25 degrees C. The chemical composition of MK was mainly based on SiO2 2 (54.1 wt%) and Al2O3 2 O 3 (35.9 wt%), and SCSA was mainly composed of SiO2 2 (58.6 wt%). Microstructural studies of pastes showed that occurred a formation of N-A-S-H amorphous reaction products and no crystalline phases were formed; SCSA contributed to the formation of geopolymer reaction products as a secondary role to the main reaction of MK; the presence of SCSA slightly increased the porosity and did not excessively modify the pore distribution; and the pastes with SCSA presented a heterogeneous microstructure. The compressive strength of mortars reached values over 50 MPa after 90 days of curing. Therefore, SCSA was a sustainable replacement for MK in producing geopolymers., This work was supported by the Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) [grant number 153164/2016-6] for scholarship to J.C.B. Moraes; Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) [grant number 401724/2013-1] ; and the "Ministerio de Educacion, Cultura y Deporte" of Spain ("Cooperacion Interuniversitaria" program with Brazil) [grant number PHB-2011-0016-PC] . Finally, M.M. Tashima wishes to thank the Spanish Ministry of Universities and the Universitat Politecnica de Valencia for the grant "Maria Zambrano for attraction of international talent", funded by European Union-Next Generation.