Pasar al contenido principal

DIGITALIZADORES BASADOS EN RADIO COGNITIVA PARA NODOS IOT

PID2019-103876RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reducing the nonlinearity and harmonic distortion in FD-SOI CMOS current-starved inverters and VCROs

  • Okorie, Promise I.
  • Ahmadi-Farsani, Javad
  • Rosa, José M. de la
This paper demonstrates experimentally how to reduce the nonlinearity of some analog and mixed-signal circuits by using the enhanced body effect provided by Fully-Depleted Silicon on Insulator (FD-SOI) CMOS technology. A current-starved CMOS inverter and a Voltage-Controlled Ring Oscillator (VCRO) are considered as case studies. The inverter is configured as a simple amplifier stage in which the harmonic distortion can be reduced and even removed by the combined action of the control voltages applied at the gate and bulk terminals of the current-source transistors. This current-starved inverter is used as the basic building block of a VCRO, where a more linear voltage-to-frequency characteristic can be achieved if the bulk terminal is used as the control voltage of the oscillator. The circuits under study have been designed and fabricated in a 28-nm FD-SOI technology and experimental results are shown to validate the presented approach., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

AI-Assisted Sigma-Delta Converters - Application to Cognitive Radio

  • Rosa, José M. de la
This brief discusses the use of Artificial Intelligence (AI) to manage the operation and improve the performance of Analog-to-Digital Converters (ADCs) based on Sigma-Delta Modulators ( ΣΔ Ms). The reconfigurable nature of ΣΔ Ms can be enhanced by AI algorithms in order to adapt the specifications of ADCs to diverse input signal requirements, environment interferences, noise levels, battery status, etc. A high degree of programmability is required, which demands for scaling-friendly, mostly-digital analog circuit techniques as well as suitable topologies of Artificial Neural Networks (ANNs) to implement the AI engine. Moreover, the practical implementation of AI-assisted ΣΔ Ms requires to adopt diverse design strategies – from the ΣΔM architecture itself to AI modules and circuit building blocks – which are overviewed in this brief. As an application and case study, an ANN-assisted ADC for Software-Defined Radio (SDR) and Cognitive Radio (CR) is considered. The system is based on the use of a widely-tunable Band-Pass (BP)- ΣΔM , and an ANN is used to predict the occupancy of frequency bands and modify the notch frequency of the BP- ΣΔM accordingly., 10.13039/501100004837-MCIN/AEI/10.13039/501100011033 (Grant Number: PID2019-103876RB-I00). European Union “ESF Investing in Your Future” 10.13039/501100006461-“Junta de Andalucía” (Grant Number: US-1260118 and P20-00599), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

AI-Managed Cognitive Radio Digitizers

  • Rosa, José M. de la
Embedding Artificial Intelligence (AI) in integrated circuits is one of the technology pillars of the so-called digital transformation . Nowadays, the vast majority of electronic devices benefits from digital signal processing to implement more and more functionalities, which can be further enhanced by the action of AI algorithms and artefacts. Moreover, as the analog/digital interfaces are moving closer and closer to the point where the information is either acquired or transmitted, the so-called AI-managed data converters are becoming key building blocks in an increasingly number of interconnected cyberphysical systems–made up of both software and hardware components. Software Defined Radio (SDR) and Cognitive Radio (CR) systems intended for 5G/6G communications are good examples which can benefit from an early digitization managed by AI engines. In this context, this paper presents an overview of circuits and systems techniques for AI-managed analog/digital interfaces with application in SDR/CR mobile telecom systems. Some design trends and challenges are discussed, going from new communications and computing paradigms for AIoT devices and networks, to digital-based/scaling-friendly analog circuit techniques for an efficient digitization. The state of the art on Analog-to-Digital Converters (ADCs) is surveyed, putting emphasis on highly-programmable Sigma-Delta Modulators (ΣΔMs) as one of the best ADC candidates for SDR/CR transceivers. Some chip examples are shown to illustrate their potential application in AI-enhanced CR end-devices., 10.13039/501100000780-European Union (Grant Number: PID2019-103876RB-I00) 10.13039/501100011011-Junta de Andalucía (Grant Number: US-1260118 and PY20-00599)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bandpass Sigma–Delta modulation: The path toward RF-to-digital conversion in Software-defined radio

  • Rosa, José M. de la
This paper reviews the state of the art on bandpass ΣΔ modulators (BP-ΣΔ Ms) intended to digitize radio frequency (RF) signals. A priori, this is the most direct way to implement software-defined radio (SDR) systems since the analog/digital interface is placed closer to the antenna, thus reducing the analog circuitry and doing most of the signal processing in the digital domain. In spite of their higher programmability and scalability, RF BP-ΣΔ M analog-to-digital converters (ADCs) require more energy to operate in the GHz range as compared with their low-pass (LP) counterparts. This makes conventional direct conversion receivers (DCRs) the commonplace approach due to their overall smaller energy consumption. This paper surveys some circuits and systems techniques which can make RF ADCs and SDR-based transceivers more efficient and feasible to be embedded in mobile terminals., This work was supported in part by Grant PID2019-103876RB-I00, funded by MCIN/AEI/10.13039/501100011033, by the European Union “ESF Investing in your future”, and by “Junta de Andalucía” under contract P20-00599., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultra-High-Resistance Pseudo-Resistors With Small Variations in a Wide Symmetrical Input Voltage Swing

  • Karami Horestani, Fatemeh
  • Rosa, José M. de la
This brief presents a new strategy and circuit configuration composed of serially-connected PMOS devices operating in the subthreshold region for implementing ultra-high-value resistors required in very low-frequency active-RC filters and bio-amplifiers. Depending on the application, signal bandwidth for instance in bio-amplifiers may vary from a few mHz up to a maximum of 10 kHz. Three different resistor structures are proposed to achieve ultra-high resistance. While ranging in the order of several T Ω, the proposed ultra-high-resistance pseudo-resistors occupy a small on-chip silicon area, which is one of the main issues in the design of analog front-end circuits in ultra-low power implantable biomedical microsystems. In addition, these ultra-high-value resistors lead to the use of a small capacitance to create a very small cut-off frequency. Therefore, the large area to implement capacitances is also considerably reduced. The proposed resistor structures have very small variations about 7% and 12% in a wide input voltage range (-0.5 V+0.5 V), thus significantly improving the total harmonic distortion of bio-amplifiers and the analog front-end of the system. Simulation results of different circuits designed in a 180nm CMOS technology, are shown to demonstrate the advantages of the proposed ultra-high-resistance pseudo-resistors., This work was supported in part by Grant PID2019-103876RB-I00, funded by MCIN/AEI/10.13039/501100011033, by the European Union ESF Investing in your future, and by ”Junta de Andalucia” under Grant P20-00599., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combining Software-Defined Radio Learning Modules and Neural Networks for Teaching Communication Systems Courses †

  • Camuñas-Mesa, Luis A.
  • Rosa, José M. de la
The paradigm known as Cognitive Radio (CR) proposes a continuous sensing of the electromagnetic spectrum in order to dynamically modify transmission parameters, making intelligent use of the environment by taking advantage of different techniques such as Neural Networks. This paradigm is becoming especially relevant due to the congestion in the spectrum produced by increasing numbers of IoT (Internet of Things) devices. Nowadays, many different Software-Defined Radio (SDR) platforms provide tools to implement CR systems in a teaching laboratory environment. Within the framework of a ‘Communication Systems’ course, this paper presents a methodology for learning the fundamentals of radio transmitters and receivers in combination with Convolutional Neural Networks (CNNs).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Use of Artificial Neural Networks for the Automated High-Level Design of ΣΔ Modulators

  • Díaz-Lobo, Pablo
  • Liñán-Cembrano, Gustavo
  • Rosa, José M. de la
This paper presents a high-level synthesis methodology for Sigma-Delta Modulators (Sigma Delta Ms) that combines behavioral modeling and simulation for performance evaluation, and Artificial Neural Networks (ANNs) to generate high-level designs variables for the required specifications. To this end, comprehensive datasets made up of design variables and performance metrics, generated from accurate behavioral simulations of different kinds of Sigma Delta Ms, are used to allow the ANN to learn the complex relationships between design-variables and specifications. Several representative case studies are considered, including single-loop and cascade architectures with single-bit and multi-bit quantization, as well as both Switched-Capacitor (SC) and Continuous-Time (CT) circuit techniques. The proposed solution works in two steps. First, for a given set of specifications, a trained classifier proposes one of the available Sigma Delta text{M} architectures in the dataset. Second, for the proposed architecture, a Regression-type Neural Network (RNN) infers the design variables required to produce the requested specifications. A comparison with other optimization methods - such as genetic algorithms and gradient descent - is discussed, demonstrating that the presented approach yields to more efficient design solutions in terms of performance metrics and CPU time., This work was supported in part by Grants PID2019-103876RB-I00, PID2022-138078OB-I00, funded by MCIN/AEI/10.13039/501100011033, by the European Union ESF Investing in your future, by ERDF A way of making Europe, and by ”Junta de Andaluc´ıa” under Grant P20-00599., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design Automation of Analog and Mixed-Signal Circuits Using Neural Networks - A Tutorial Brief

  • Liñán-Cembrano, Gustavo
  • Lourenço, Nuno
  • Horta, Nuno
  • Rosa, José M. de la
© 2024 IEEE., This tutorial brief shows how Artificial Neural Networks (ANNs) can be used for the optimization and automated design of analog and mixed-signal circuits. A survey of conventional and computational-intelligence design methods is given as a motivation towards using ANNs as optimization engines. A step-by-step procedure is described explaining the key aspects to consider in our approach, such as dataset preparation, ANNs modeling, training, and optimization of network hyperparameters. As an application, two case studies at different hierarchy levels are presented. The first one is the system-level sizing of Sigma-Delta Modulators (Σ Δ Ms), where ANNs are combined with behavioral simulations to generate valid circuit-level design variables for a given set of specifications. The second example combines ANNs with electrical simulators to optimize the circuit-level design of operational transconductance amplifiers. The results validate the presented approach and show its benefits with respect to prior art on synthesis methods of analog and mixed-signal circuits and systems., This work was supported in part by Grant PID2019-103876RB-I00, funded by MCIN/AEI/10.13039/501100011033, by the European Union ”ESF Investing in your future”, and by ”Junta de Andaluc´ıa” in Spain under grant P20- 00599, by Fundac¸ao para a Ci ˜ encia e a Tecnologia–Minist ˆ erio da Ci ´ encia, ˆ Tecnologia e Ensino Superior (FCT/MCTES), in Portugal, through national funds and, when applicable, co-funded by European Union (EU) funds under the project UIDB/50008/2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Use of FIR Feedback in Bandpass Delta-Sigma Modulators

  • Gorji, Javad
  • Pavan, Shanthi
  • Rosa, José M. de la
© 2023 IEEE, This paper presents a new architecture for bandpass delta-sigma modulators (BP ΔΣ Ms) featuring finite impulse response (FIR) filters in the feedback path. The effectiveness of FIR feedback in lowpass delta-sigma modulators (LP ΔΣ Ms) has been well-established in improving loop-filter linearity and robustness to clock jitter. Building upon these findings, we explore the application of bandpass FIR filters in single-bit BP ΔΣ Ms. By contrast to conventional BP ΔΣ Ms, the proposed technique significantly reduces out-of-band quantization error contents in the feedback signal. This approach is applicable to both discrete-time and continuous-time implementations. Further, we show that performance does not improve by increasing the number of FIR taps beyond a certain point. However, we can enhance filtering performance by employing non-equal coefficients within the filter. To validate the efficacy of the presented approach, the paper includes electrical simulation of a 4th-order active-RC BP ΔΣM., This work was supported in part by Grants PID2019-103876RB-I00, PID2022-138078OB-I00, funded by MCIN/AEI/10.13039/501100011033, by the European Union ESF Investing in your future, by ERDF A way of making Europe, and in part by the Center of Excellence in RF, Analog and MixedSignal ICs (CERAMIC), IIT Madras., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Addressing preprocessing for spectrum sensing using image processing

  • Rojas, Andrés
  • Jovanovic-Dolecek, G.
  • Rosa, José M. de la
This paper presents a novel approach to preprocessing spectrograms for spectrum sensing (SS) from the image-processing perspective. Gaussian bilateral filtering, a common image-denoising technique, has been introduced to improve spectrograms in SS in high-noise environments. This approach is evaluated by simulating LTE and 5 G NR signal spectrograms across various signal-to-noise ratios (SNRs). An extensive review and comparison with recent spectrogram-based works for different applications demonstrated that the proposed approach does not depend on deep learning models to denoise spectrograms, showing a simpler yet effective strategy to address SS., This work was supported in part by Consejo Nacional de Humanidades, Ciencias y Tecnologías (CONAHCYT) and by Grants PID2019–103876RB-I00, PID2022-138078OB-I00, PDC2023-145808-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union, ERDF A way of making Europe., Peer reviewed