Pasar al contenido principal

DISEÑO Y FABRICACION DE ALEACIONES DE ALTA ENTROPIA PARA SU USO EN FABRICACION ADITIVA

PID2019-104382RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of solid state transformations and their effect on mechanical response in the stoichiometric Ni2Cr using in-situ synchrotron radiation diffraction experiments

  • Medina, Judit
  • Pérez Zubiaur, Pablo
  • Vega, M. F.
  • Garcés, Gerardo
  • Maaward, E.
  • Schell, N.
  • Adeva, Paloma
A complete microstructural characterization of the stoichiometric Ni2Cr alloy after different ageing times in which different degrees of order are attained has been carried out. The study of order-disorder transformation has been done using synchrotron radiation diffraction monitoring eventual changes in high-energy X-ray diffraction (HEXRD) patterns every six seconds in the course of differential scanning calorimetry DSC experiments. According to acquired data, the onset of the order-disorder transformation occurs at 630 °C, temperature higher than that reported in previous works. In addition, the appearance of fine carbide precipitation has also been found inside the grains and at grain boundaries. Both ordering of the stoichiometric Ni2Cr and carbide precipitation seems to be responsible for the strengthening of the alloy., The authors would like to acknowledge financial support of the Spanish Ministry of Science and Innovation under project PID2019-104382RB-I00. We would like to acknowledge the expert support of A. Tomás and M. Maher for assistance with the SEM and TEM at the Microscopy Laboratory of Cenim.as well as the expert support of C. Cepeda and E. Laurín for assistance with the alloy fabrication at IMDEA Materials and the heat treatments of the samples at CENIM, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of the Microstructure in a Al5Co15Cr30Fe25Ni25 High Entropy Alloy through Thermo-Mechanical and Thermal Treatments

  • Pérez Zubiaur, Pablo
  • Medina, Judit
  • Vega González, María Fernanda
  • Garcés, Gerardo
  • Adeva, Paloma
The effect of thermos-mechanical processing and thermal treatments on the microstructure of a single phase fcc-based AlCoCrFeNi high entropy alloy is evaluated in this study. As-cast ingots of the high entropy alloy were thermo-mechanically processed following different routes involving forging, cold rolling, warm rolling or hot rolling. In addition, the microstructural evolution of highly deformed cold rolled sheets with the annealing temperature was analyzed. The data reveal that a high-volume fraction of the microstructure commences to recrystallize from 600 °C. In the absence of recrystallization, i.e., below 600 °C, the hardness of thermo-mechanically processed and annealed samples was very close. When recrystallization takes place, the thermo-mechanically treated alloys exhibit higher hardness than the annealed alloys because the recrystallized grains are strengthened by dislocations generated in further steps of the processing while the alloys in the annealed condition are free of dislocations. Maximum hardening is found for the alloy warm-rolled at 450 °C and the alloy cold-rolled plus annealing at 500 °C for 1 h. Diffusion of solute atoms to the core of dislocations, pinning its movement, accounts for the additional hardening., This research was funded by the Spanish Ministry of Science and Innovation under project PID2019-104382RBI00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Load Partitioning and Strain Compatibility in a Non-Equiatomic Dual-Phase AlCoCrFeNi High-Entropy Alloy Processed by Forging

  • Pérez Zubiaur, Pablo
  • Perosanz, Sergio
  • Medina, Judit
  • Laurín, Edurne
  • Orozco-Caballero, A.
  • Hernández Pascual, R.
  • Stark, Andreas
  • Schell, Norbert
  • Adeva, Paloma
  • Garces, Gerardo
This article belongs to the Special Issue Advanced Manufacturing and Processing Technology for Metallic Materials., The tensile and compressive behavior of hot-forged Al5Co35Cr30Fe20Ni5 high-entropy alloy (HEA) has been studied at room temperature. The forged HEA has a dual-phase microstructure consisting of a predominant face-centered cubic (FCC) matrix and a body-centered cubic (BCC) phase. The BCC phase embeds a low volume fraction of ordered BCC nanoparticles (B2 structure). During forging, the BCC phase recrystallizes more easily than the FCC phase. Yielding is controlled by the deformation of the FCC phase, although BCC grains assume an additional part of the load transferred by FCC grains, even during the elastic regime. During the onset of plastic deformation, slip is activated preferentially in the FCC phase in those grains that are favorably oriented for slip in planes (111). Dislocation pile-ups at FCC/BCC interfaces induce dislocation slip in the BCC phase. In the BCC phase, B2 particles act as effective obstacles to dislocation motion through the Orowan mechanism. As the deformation proceeds, dislocation activity causes an increase in the misorientation in both phases, resulting in the formation of subgrains whose boundaries are effective for blocking dislocation motion. The combination of high strength and ductility arises from the dual-phase FCC–BCC microstructure of the alloy. The load borne by the BCC phase partially relieves the stress applied to the FCC matrix, enabling the latter to continue deforming., We would like to acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness under projects PID2019-104382RB-I00 and PID2022-143068OB-I00. The Deutsches Elektronen-Synchrotron (DESY) is acknowledged for providing beamtime at the P07 beamline of the PETRA III synchrotron facility under proposal I-20221015EC. The research leading to this result has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 730872 (CALIPSOplus). We also acknowledge the services provided by the MiNa Laboratory at IMN, as well as funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and the EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of interchanging Co and Fe content on the mechanical behaviour of two non-equiatomic AlCoCrFeNi HEAs manufactured by Selective Laser Melting

  • Perosanz, Sergio
  • Pérez Zubiaur, Pablo
  • Medina, Judit
  • Stark, Andreas
  • Martín-Piris, N.
  • Garcés, Gerardo
This work presents a comprehensive analysis of the microstructural and mechanical evolution of non-equiatomic AlCoCrFeNi high-entropy alloys (HEAs) fabricated via Selective Laser Melting (SLM). Two alloy compositions, designed to promote distinct phase formations (single and dual phase, respectively), were processed over a wide range of volumetric energy densities (VED). Microstructural characterization revealed a predominant body-centered cubic phase across all conditions, in which the formation of face-centered cubic and B2 phases is reduced to negligible fractions due to high cooling rates attained during SLM processing. Optimal VED values (40–65 J/mm) yielded nearly fully dense structures with refined grain morphology and reduced porosity. Mechanical testing demonstrated enhanced hardness and yield strength under optimal conditions, with HEA-A consistently outperforming HEA-B due to its higher Co/Cr content ratio and grain orientation. Synchrotron radiation diffraction during in-situ compression tests revealed anisotropic elastic behavior and load redistribution among grain families, with {200}-oriented grains acting as reinforcement. The results underscore the critical role of VED in tailoring microstructure and mechanical properties of both studied HEAs, positioning them as promising candidates for high-performance structural applications., We would like to acknowledge financial support of the Deutsches Elektronen-Synchrotron DESY is acknowledged for the provision of beamtime at the P07 beamline of the PETRA III synchrotron facility under the project I-20240303 EC. We would also like to acknowledge the Electron Microscopy Laboratory at CENIM for their assistance with EBSD maps. Grant PID2019-104382RB-I00 funded by MICIU/AEI/10.13039/501100011033. Grant PID2022-143068OB-I00 funded by MICIU/AEI/10.13039/501100011033gs5, and by “ERDF/EU”.