Pasar al contenido principal

TEXTURAS MAGNETICAS 3D EN MULTICAPAS Y NANOESTRUCTURAS PARA APLICACIONES EN APROVECHAMIENTO DE ENERGIA Y GUIAS DE VORTICES

PID2019-104604RB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE OVIEDO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Complex free-space magnetic field textures induced by 3D magnetic nanostructures

  • Donnelly, Claire
  • Hierro-Rodríguez, Aurelio
  • Abert, Claas
  • Witte, Katharina
  • Skoric, Luka
  • Sanz-Hernández, Dédalo
  • Finizio, Simone
  • Meng, Fanfan
  • McVitie, Stephen
  • Raabe, Jörg
  • Suess, Dieter
  • Cowburn, Russell
  • Fernández-Pacheco, Amalio
The design of complex, competing effects in magnetic systems – be it via the introduction of nonlinear interactions, or the patterning of three-dimensional geometries – is an emerging route to achieve new functionalities. Here, we combine 3D geometric effects with non-linear and non-local interactions to produce magnetic field textures in free space. For this, we harness direct write nanofabrication techniques, creating intertwined nanomagnetic cobalt double helices, where curvature, torsion, chirality, and magnetic coupling are jointly exploited. By reconstructing the 3D vectorial magnetic state of the double helices with soft X-ray magnetic laminography, we identify the presence of a regular array of highly coupled locked domain wall pairs in neighbouring helices. Micromagnetic simulations reveal that the magnetisation configuration leads to the formation of an array of complex textures in the magnetic induction, consisting of vortices in the magnetisation and antivortices in free space, which together, form an effective B-field cross-tie wall. The design and creation of complex three-dimensional magnetic field nanotextures opens new possibilities for smart materials, unconventional computing, particle trapping and magnetic imaging., This work was funded by an EPSRC Early Career Fellowship EP/M008517/1 and the Winton Program for the Physics of Sustainability. C.D. acknowledges funding from the Leverhulme Trust (ECF-2018-016), the Isaac Newton Trust (18-08), the L’Oréal-UNESCO UK and Ireland Fellowship For Women In Science 2019, and the Max Planck Society Lise Meitner Excellence Program. A.F.P. acknowledges funding by the European Community under the Horizon 2020 Program, Contract no. 101001290, 3DNANOMAG. A.H.-R. and S.MV. acknowledge the support from European Union’s Horizon 2020 research and innovation program under Marie Skłodowska-Curie grant ref. H2020-MSCA-IF-2016-746958. A.H.-R. acknowledges funding from Spanish AEI under project reference PID2019–104604RB/AEI/10.13039/501100011033. The PolLux end station was financed by the German Ministerium für Bildung und Forschung (BMBF) through contracts 05K16WED and 05K19WE2. K.W. acknowledges the funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 701647. A.F.P. is grateful to the University of Cambridge and the University of Glasgow, where part of this research was performed., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of dynamics in weak PMA magnets

  • Álvarez-Prado, L. M.
This article belongs to the Special Issue Recent Advances in Nanomagnetism., We have recently shown that a hybrid magnetic thin film with orthogonal anisotropies presenting weak stripe domains can achieve a high degree of controllability of its ferromagnetic resonance. This work explores the origin of the reconfigurability through micromagnetic simulations. The static domain structures which control the thin film resonance can be found under a deterministic applied field protocol. In contrast to similar systems reported, our effect can be obtained under low magnetic fields. We have also found through simulations that the spin wave propagation in the hybrid is nonreciprocal: two adjacent regions emit antiparallel spin waves along the stripe domains. Both properties convert the hybrid in a candidate for future magnonic devices at the nanoscale., This work was funded by the Spanish Ministry of Science and Innovation (Project PID2019-104604RB/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferromagnetic resonance studies in magnetic nanosystems

  • Schmool, D. S.
  • Markó, Daniel
  • Lin, Ko-Wei
  • Hierro-Rodríguez, Aurelio
  • Quirós, Carlos
  • Díaz, Javier
  • Álvarez-Prado, L. M.
  • Wu, Jong-Ching
This article belongs to the Special Issue Recent Advances in Nanomagnetism., Ferromagnetic resonance is a powerful method for the study of all classes of magnetic materials. The experimental technique has been used for many decades and is based on the excitation of a magnetic spin system via a microwave (or rf) field. While earlier methods were based on the use of a microwave spectrometer, more recent developments have seen the widespread use of the vector network analyzer (VNA), which provides a more versatile measurement system at almost comparable sensitivity. While the former is based on a fixed frequency of excitation, the VNA enables frequency-dependent measurements, allowing more in-depth analysis. We have applied this technique to the study of nanostructured thin films or nanodots and coupled magnetic layer systems comprised of exchange-coupled ferromagnetic layers with in-plane and perpendicular magnetic anisotropies. In the first system, we have investigated the magnetization dynamics in Co/Ag bilayers and nanodots. In the second system, we have studied Permalloy (Ni80Fe20, hereafter Py) thin films coupled via an intervening Al layer of varying thickness to a NdCo film which has perpendicular magnetic anisotropy., D.S.S., D.M. and L.M.Á.-P. acknowledge financial support from the Institut de Physique of CNRS for experimental equipment, a post doc position, and guest researcher stays, respectively. A.H.-R. acknowledges European Union’s Horizon 2020 framework program for research and innovation under the Marie Skłodowska-Curie Action No. H2020-MSCA-IF-2016-746958. A.H.-R., C.Q., J.D. and L.M.Á.-P. would like to thank the Spanish Ministerio de Ciencia e Innovación (MCI) for financial support under Project PID2019-104604RB/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic moment orientation and in-depth distribution of dysprosium near the surface of DyCo4.6 thin films from x-ray circularly polarized absorption

  • Díaz, Javier
  • Blanco-Roldán, C.
We have investigated the dysprosium distribution and its magnetic moment orientation at the region near the surface of DyCo4.4 and DyCo4.6 ferrimagnetic amorphous films with perpendicular magnetic anisotropy. X-ray magnetic circular dichroism spectroscopy of the films at the Dy M4,5 and Co L2,3 edges using total electron yield (TEY) detection was performed at 2 K and 300 K temperatures, and at sample orientations ranged from 0∘ to 70∘ with respect to the normal to the sample. The measurements showed an apparent partial decoupling between the cobalt and dysprosium magnetic sublattices. At RT, the magnetic moment per atom of dysprosium was below the minimum value expected if all dysprosium moments were Antiferromagnetic (AF) coupled to cobalt. At 2 K, the cobalt sublattice presented a surprisingly stronger magnetic anisotropy than the dysprosium sublattice. A detailed analysis of the circularly polarized spectra of the Dy M5 edge, based on the deconvolution of the spectra in their related parallel, antiparallel, and transverse to Jz spectral components, demonstrates that the spectra are composed by dysprosium with different magnetic moment distributions. The fit of the Dy M5 spectra using the Jz spectral components evidenced a gradation of dysprosium concentration due to segregation at the region probed by TEY. The topmost layer was magnetically uncoupled from cobalt. At RT, 25% of the dysprosium magnetic moments in the underlayer were found averaged oriented in the same direction of cobalt. The expected weak magnetic coupling of these dysprosium atoms to cobalt should explain the surprisingly lower magnetic anisotropy of the dysprosium sublattice compared to that of cobalt probed by TEY at 2 K., This project has been supported by Spanish MICINN under Grants No. FIS2016-76058 (AEI/FEDER, EU) and No. PID2019-104604RB/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic textures and singularities in ferri/ferromagnetic multilayers

  • Hermosa, Javier
  • Hierro-Rodríguez, Aurelio
  • Quirós, Carlos
  • Álvarez-Prado, L. M.
  • Sorrentino, Andrea
  • Valcárcel, Ricardo
  • Rehbein, Stefan
  • Pereiro, Eva
  • Martín, José Ignacio
  • Vélez, María
  • Ferrer, Salvador
The stacking of ferrimagnetic and ferromagnetic films leads to a competition between magnetic interactions that can stabilize Bloch points and other singularities at the interfaces. In this work, GdxCo1-x/NdCo5/GdyCo1-y trilayers, with different thicknesses, have been prepared. By tuning the stoichiometry of the Gd-Co outer layers, the Co magnetic sublattice dominates in one layer, whereas the opposite side is Gd dominated. In this way, in-depth magnetization domain walls can be created due to the balance between exchange and magnetostatic interactions. In addition, the weak perpendicular magnetic anisotropy of the Nd-Co central layer induces a stripe domain pattern, supporting the formation of Bloch points, meron-like textures, and vortex-antivortex pairs. The interaction between both types of structures, in-depth domain walls and magnetic singularities, has been studied by a combination of macroscopic Magneto-Optical Kerr Effect and Vibrating Sample Magnetometry measurements with microscopic Magnetic Force Microscopy and element selective magnetic Transmission soft X-ray Microscopy imaging. The results confirm marked changes in the magnetic properties of the trilayers, as compared with those single NdCo5 films, and the formation of complex magnetic textures, associated with partial magnetization reversal, where magnetic singularities are formed., This work was supported by Spanish MINECO under Project No. FIS2016-76058 (AEI/FEDER, UE), and Spanish MCI under Project No. PID2019-104604RB/AEI/10.13039/501100011033. These experiments were performed at the MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff. David Martínez Blanco, from Servicios Científico-Técnicos (Unidad de medidas magnéticas/RMN sólidos) Universidad de Oviedo, is acknowledged for VSM measurements. A. H.-R. acknowledges the support from European Union’s Horizon 2020 research and innovation program under Marie Skłodowska-Curie grant ref. H2020-MSCA-IF-2016-746958. J. H. acknowledges the support from Vicerrectorado de Investigación of Universidad de Oviedo (Plan de Apoyo y Promoción de la Investigación 2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Realization of macroscopic ratchet effect based on nonperiodic and uneven potentials

  • Rollano, Víctor
  • Gómez, Alicia
  • Muñoz-Noval, Alvaro
  • Vélez, María
  • Calero de Ory, Marina
  • Menghini, M.
  • González, Elvira M.
  • Vicent, J. L.
Ratchet devices allow turning an ac input signal into a dc output signal. A ratchet device is set by moving particles driven by zero averages forces on asymmetric potentials. Hybrid nanostructures combining artificially fabricated spin ice nanomagnet arrays with superconducting films have been identified as a good choice to develop ratchet nanodevices. In the current device, the asymmetric potentials are provided by charged Néel walls located in the vertices of spin ice magnetic honeycomb array, whereas the role of moving particles is played by superconducting vortices. We have experimentally obtained ratchet effect for different spin ice I configurations and for vortex lattice moving parallel or perpendicular to magnetic easy axes. Remarkably, the ratchet magnitudes are similar in all the experimental runs; i. e. different spin ice I configurations and in both relevant directions of the vortex lattice motion. We have simulated the interplay between vortex motion directions and a single asymmetric potential. It turns out vortices interact with uneven asymmetric potentials, since they move with trajectories crossing charged Néel walls with different orientations. Moreover, we have found out the asymmetric pair potentials which generate the local ratchet effect. In this rocking ratchet the particles (vortices) on the move are interacting each other (vortex lattice); therefore, the ratchet local effect turns into a global macroscopic effect. In summary, this ratchet device benefits from interacting particles moving in robust and topological protected type I spin ice landscapes., This work was supported by Spanish MICINN grants FIS2016-76058 (AEI/FEDER, UE), EU COST- CA16218. IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (MICINN, Grant SEV-2016-0686). MCO and AG acknowledges financial support from Spanish MICINN Grant ESP2017-86582-C4-1-R and IJCI-2017-33991; AMN acknowledges financial support from Spanish CAM Grant 2018-T1/IND-10360. MV acknowledges financial support from Spanish MICINN Grant PID2019-104604RB/AEI/10.13039/50110001103., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset supporting publication "Domain wall automotion in three-dimensional magnetic helical interconnectors"

  • Skoric, Luka
  • Donnelly, Claire
  • Hierro-Rodríguez, Aurelio
  • Cascales Sandoval, Miguel A.
  • Ruiz-Gómez, Sandra
  • Foerster, Michael
  • Niño Orti, Miguel A.
  • Belkhou, Rachid
  • Abert, Claas
  • Suess, Dieter
  • Fernández-Pacheco, Amalio
Preliminary measurements were performed at HERMES beamline at SOLEIL synchrotron in collaboration with SOLEIL staff, proposal nos. 20200879, 20190565 and 20170904. This work was supported by the EPSRC Cambridge NanoDTC EP/L015978/1,the Winton Program for the Physics of Sustainability, the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020, and by the European Community under the Horizon 2020 Program, Contract no. 101001290, 3DNANOMAG. L. Skoric acknowledges support from St Johns College of the University of Cambridge. C. Donnelly was supported by the Leverhulme Trust (ECF-2018-016), the Isaac Newton Trust (18-08) and the L'Oréal-UNESCO UK and Ireland Fellowship For Women In Science. A. Hierro-Rodriguez acknowledges support from Spanish AEI under project reference PID2019104604RB/AEI/10.13039/501100011033. The authors acknowledge the University of Vienna research platform MMM Mathematics -Magnetism - Materials, and the FWF project I4917., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

3D magnetic structure of domain walls in soft magnetic racetracks by MFM and X-ray microscopy

  • Hermosa, Javier
  • Hierro-Rodríguez, Aurelio
  • Martín, José Ignacio
  • Sorrentino, Andrea
  • Álvarez-Prado, L. M.
  • Vélez, María
  • Pereiro, Eva
  • Quirós, Carlos
  • Ferrer, Salvador
Póster presentado a la INTERMAG Conference - IEEE International Magnetics, celebrada on-line del 26 al 30 de abril de 2021., In plane magnetization stripes of soft magnetic alloys have been proposed as magnetic information storage devices. In these kind of systems, regions of uniform magnetization with opposite senses are separated by domain walls(DW), known as head-to-headortail-to-tail walls, that may have different structures depending on the width and thickness of the stripes. Usually, two types of DW are expected, known as transverse, for thin stripes, orvortex, for thick stripes. The work by Nguyenetal has shown that in stripes thicker than 60nm, a thirdty peofhead-to-head DWmay exist, the so called Landauwall, with a significantout-of-plane magnetization core that is not homogenous across the film thickness., Work supported by Spanish MINECO under grant PID2019-104604RB/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Magnetic vortex-antivortex pairs in the magnetic stripe domain pattern: magnetization reversal and topology

  • Vélez, María
  • Hierro-Rodríguez, Aurelio
  • Vega Fernández, Victoria
  • Hermosa, Javier
  • Quirós, Carlos
  • Sorrentino, Andrea
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Pereiro, Eva
  • Ferrer, Salvador
Resumen del trabajo presentado al American Physical Society March Meeting, celebrado on-line del 15 al 19 de marzo de 2021., Work supported by Spanish MINECO (Grants FIS2016-76058 (AEI/FEDER, EU) and PID2019-104604RB/AEI/10.13039/501100011033) and European Union's Horizon 2020 Marie Sklodowska-Curie Grant ref. H2020-MSCA-IF-2016-746958., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Reconfigurable spin-wave propagation in magnetic stripe domains in hybrid system

  • Szulc, Krzysztof
  • Tacchi, Silvia
  • Gruszecki, Paweł
  • Valdés-Bango, F.
  • Quirós, Carlos
  • Hierro-Rodríguez, Aurelio
  • Díaz, Javier
  • Martín, José Ignacio
  • Vélez, María
  • Carlotti, Giovanni
  • Krawczyk, Maciej
  • Álvarez-Prado, L. M.
Resumen del trabajo presentado a la INTERMAG Conference - IEEE International Magnetics, celebrada on-line del 26 al 30 de abril de 2021., Very recently magnetic stripe domains, characterized by alternating up and down out-of-plane orientation of the magnetization, have received great interest due to the possibility to use stripe patterns to manipulate spin-wave (SW) propagation as in artificial magnonic crystals. In this work, we demonstrate the control of the SW propagation by using reconfigurable regular stripe-pattern domain structure in the hybrid system. The investigated system consists of 64-nm-thick NdCo layer and 10-nm-thick NiFe layer, coupled through an Al layer of different thicknesses. Magnetic force microscopy (MFM) measurements show that, due to the perpendicular magnetic anisotropy of the NdCo film, the system develops stripe domains aligned with the last in-plane saturation direction. The domain pattern is found to have a period of about 140 nm, which is almost independent on the thickness of the Al layer. The magnetization reversal of the trilayer system was investigated by vibrating sample magnetometer, showing that the hysteresis loop is characterized by a two-step process, due to the different coercivity of the NiFe and NdCo films. Detailed analysis of the hysteresis loops along with micromagnetic simulations indicates that the stray magnetic field coming from the NdCo layer induces a regular domain structure also in the NiFe layer, which is tuned by the thickness of Al spacer. In addition, upon reversing the applied magnetic field, an antiparallel state, characterized by an antiparallel alignment of the magnetization component parallel to the domain axis in the NdCo and NiFe stripes, is formed. Then, Brillouin light scattering spectroscopy has been used to measure the spectra of the SWs propagating in the direction perpendicular to stripe domains for the parallel and the antiparallel state. For both configurations, the dispersion relation shows a strongly nonreciprocal mode. However, in the parallel state SWs propagating with positive and negative wavevector are both characterized by a positive dispersion, while in the reversed state SWs propagating with negative wavevector show a negative dispersion. The above experimental results have been satisfactorily reproduced by numerical simulations. The latter show that the detected SW mode is mainly localized in the NiFe layer and its frequency nonreciprocity can be ascribed to the static magnetization configuration as well as to the interaction with the NdCo induced by the SWs via the dynamic stray field., PID2019-104604RB, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Domain wall automotion in three-dimensional magnetic helical interconnectors

  • Skoric, Luka
  • Donnelly, Claire
  • Hierro-Rodríguez, Aurelio
  • Cascales Sandoval, Miguel A.
  • Ruiz-Gómez, Sandra
  • Foerster, Michael
  • Niño Orti, Miguel A.
  • Belkhou, Rachid
  • Abert, Claas
  • Suess, Dieter
  • Fernández-Pacheco, Amalio
The fundamental limits currently faced by traditional computing devices necessitate the exploration of ways to store, compute, and transmit information going beyond the current CMOS-based technologies. Here, we propose a three-dimensional (3D) magnetic interconnector that exploits geometry-driven automotion of domain walls (DWs), for the transfer of magnetic information between functional magnetic planes. By combining state-of-the-art 3D nanoprinting and standard physical vapor deposition, we prototype 3D helical DW conduits. We observe the automotion of DWs by imaging their magnetic state under different field sequences using X-ray microscopy, observing a robust unidirectional motion of DWs from the bottom to the top of the spirals. From experiments and micromagnetic simulations, we determine that the large thickness gradients present in the structure are the main mechanism for 3D DW automotion. We obtain direct evidence of how this tailorable magnetic energy gradient is imprinted in the devices, and how it competes with pinning effects that are due to local changes in the energy landscape. Our work also predicts how this effect could lead to high DW velocities, reaching the Walker limit during automotion. This work demonstrates a possible mechanism for efficient transfer of magnetic information in three dimensions., This work was supported by the EPSRC Cambridge NanoDTC EP/L015978/1, the Winton Program for the Physics of Sustainability, the project CALIPSOplus (under Grant Agreement No. 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020), and by the European Community (under the Horizon 2020 Program, Contract No. 101001290, 3DNANOMAG). L.S. acknowledges support from St. Johns College of the University of Cambridge. C.D. was supported by the Leverhulme Trust (No. ECF-2018-016), the Isaac Newton Trust (No. 18-08), and the L’Oréal-UNESCO UK and Ireland Fellowship For Women In Science. A.H.-R. acknowledges support from Spanish AEI, under Project Reference No. PID2019-104604RB/AEI/10.13039/501100011033. The authors acknowledge the University of Vienna research platform MMM Mathematics–Magnetism–Materials, the FWF (Project No. I 4917), and Aragon Government through the Project Q-MAD., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D magnetic configuration of ferrimagnetic multilayers with competing interactions visualized by soft X-ray vector tomography

  • Hermosa, Javier
  • Hierro-Rodríguez, Aurelio
  • Sorrentino, Andrea
  • Martín, José Ignacio
  • Álvarez-Prado, L. M.
  • Rehbein, Stefan
  • Pereiro, Eva
  • Quirós, Carlos
  • Vélez, María
  • Ferrer, Salvador
Full control of magnetic properties in exchange coupled systems requires a good understanding of 3D magnetic configuration with lateral and in-depth resolution. Here we show results from a soft X-ray tomographic reconstruction which allow determining, solely from the experimental data, a detailed description of the vector magnetic configuration of a ferrimagnetic Gd12Co88/Nd17Co83/Gd24Co76 trilayer with engineered competing anisotropy, exchange and magnetostatic interactions at different depths. The trilayer displays chevron patterns with a distorted closure structure. Near the top Gd24Co76 layer, local exchange springs with out-of-plane magnetization reversal, quasi-domains with ripple-like patterns and magnetic vortices and antivortices across the thickness are observed. The detailed analysis of the magnetic tomogram shows that the effective strength of the exchange spring at the NdCo/GdCo interface can be finely tuned by GdxCo1-x composition and anisotropy (determined by sample fabrication) and in-plane stripe orientation (adjustable), demonstrating the suitability of 3D magnetic visualization techniques in magnetic engineering research., Alba light source is funded by the Ministry of Research and Innovation of Spain, by the Generalitat de Catalunya and by European FEDER funds. This project has been supported by Spanish MICINN under grant PID2019-104604RB/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two-step resist deposition of e-beam patterned thick Py nanostructures for x-ray microscopy

  • Hermosa, Javier
  • Hierro-Rodríguez, Aurelio
  • Quirós, Carlos
  • Vélez, María
  • Sorrentino, Andrea
  • Aballe, Lucía
  • Pereiro, Eva
  • Ferrer, Salvador
  • Martín, José Ignacio
This article belongs to the Special Issue Nanolithography: A Theme Issue in Honor of Professor José María De Teresa on the Occasion of His 50th Birthday., Patterned elements of permalloy (Py) with a thickness as large as 300 nm have been defined by electron beam lithography on X-ray-transparent 50 nm thick membranes in order to characterize their magnetic structure via Magnetic Transmission X-ray Microscopy (MTXM). To avoid the situation where the fragility of the membranes causes them to break during the lithography process, it has been found that the spin coating of the resist must be applied in two steps. The MTXM results show that our samples have a central domain wall, as well as other types of domain walls, if the nanostructures are wide enough., This research was funded by the Spanish MCI under Project No. PID2019-104604RB/AEI/10.13039/501100011033 and by the Asturias FICYT under grant GRUPIN21 AYUD/2021/51185. These experiments were performed with the MISTRAL beamline at the ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The road to 3-dim nanomagnetism: Steep curves and architectured crosswalks

  • Raftrey, David
  • Hierro-Rodríguez, Aurelio
  • Fernández-Pacheco, Amalio
  • Fischer, Peter
Nanoscience and its associated nanotechnology started several decades ago to discover and harness properties and behavior of materials that occur due to lowering their dimensionality. Nanomagnetism, which is the branch of nanoscience to investigate magnetic properties of materials down to fundamental length and time scales led to the discovery of a plethora of novel nanoscale spin phenomena and has further laid the groundwork for spintronics, which has become the primary enabler for the most advanced information technologies, including magnetic storage and sensor devices., So far, low-dimensional magnetic systems have been confined to zero (quantum dots), one (nanowires), and two (thin films) dimensions, however, recently research with artificially designed three-dimensional magnetic systems is emerging as it opens the path to novel scientifically exciting phenomena with enormous technological potential to advance spintronics further towards ultrasmall, ultrafast and most importantly low-power electronics., These three-dimensional structures harness the scientific achievements from traditional nanomagnetism, but expand them in a tailored way into the third dimension. Local curvature, particular when defined in a rather broad sense, including geometrical curvature adds to a traditional 2D film a third dimension and proximity effects drawing upon the 3D environment are among the design principles for those 3D magnetic systems., This critical focus article reviews briefly the current state-of-the-art of the emerging research topic with 3D nanomagnetic materials, and describes some of the challenges that the research community needs to address in terms of synthesis and fabrication, theory and modelling, as well as characterization and validation to ultimately bring to bear potential applications with 3D nanomagnetic devices., D.R. and P.F. acknowledge the support by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division, under Contract No. DE-AC02-05-CH11231 within the Non-Equilibrium Magnetism program (MSMAG). A.H.-R. acknowledges the support from the Spanish MICIN under grant PID2019-104604RB/AEI/10.13039/501100011033 and from the Principality of Asturias FICYT under grant AYUD/2021/51185 with the support of FEDER funds. A.F-P. acknowledges funding from the European Community (under the Horizon 2020 Program, Contract No. 101001290, 3DNANOMAG), the MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1), and the Aragon Government through the Project Q-MAD., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reconfigurable magnonic crystals based on imprinted magnetization textures in hard and soft dipolar-coupled bilayers

  • Szulc, Krzysztof
  • Tacchi, Silvia
  • Hierro-Rodríguez, Aurelio
  • Díaz, Javier
  • Gruszecki, Paweł
  • Graczyk, Piotr
  • Quirós, Carlos
  • Markó, Daniel
  • Martín, José Ignacio
  • Vélez, María
  • Schmool, D. S.
  • Carlotti, Giovanni
  • Krawczyk, Maciej
  • Álvarez-Prado, L. M.
Reconfigurable magnetization textures offer control of spin waves with promising properties for future low-power beyond-CMOS systems. However, materials with perpendicular magnetic anisotropy (PMA) suitable for stable magnetization-texture formation are characterized by high damping, which limits their applicability in magnonic devices. Here, we propose to overcome this limitation by using hybrid structures, i.e., a PMA layer magnetostatically coupled to a low-damping soft ferromagnetic film. We experimentally show that a periodic stripe-domain texture from a PMA layer is imprinted upon the soft layer and induces a nonreciprocal dispersion relation of the spin waves confined to the low-damping film. Moreover, an asymmetric bandgap features the spin-wave band diagram, which is a clear demonstration of collective spin-wave dynamics, a property characteristic for magnonic crystals with broken time-reversal symmetry. The composite character of the hybrid structure allows for stabilization of two magnetic states at remanence, with parallel and antiparallel orientation of net magnetization in hard and soft layers. The states can be switched using a low external magnetic field; therefore, the proposed system obtains an additional functionality of state reconfigurability. This study offers a link between reconfigurable magnetization textures and low-damping spin-wave dynamics, providing an opportunity to create miniaturized, programmable, and energy-efficient signal processing devices operating at high frequencies., This study has received financial support from the National Science Center of Poland (Projects Nos. UMO-2018/30/Q/ST3/00416, UMO-2018/28/C/ST3/00052, UMO-2019/35/D/ST3/03729, and UMO-2021/41/N/ST3/04478), the Spanish Ministry of Science and Innovation (Project No. PID2019-104604RB/AEI/10.13039/501100011033), and the regional FICYT funding (Grant No. GRUPIN-AYUD/2021/51185) with the support of FEDER funds. The authors acknowledge the technical support provided by Servicios Científico-Técnicos de la Universidad de Oviedo. LMAP and ST acknowledge Italian CNR for financial support from Short Term Mobility Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlled evolution of three-dimensional magnetic states in strongly coupled cylindrical nanowire pairs

  • Fullerton, John
  • Hierro-Rodríguez, Aurelio
  • Donnelly, Claire
  • Sanz-Hernández, Dédalo
  • Skoric, Luka
  • MacLaren, D. A.
  • Fernández-Pacheco, Amalio
Cylindrical magnetic nanowires are promising systems for the development of three-dimensional spintronic devices. Here, we simulate the evolution of magnetic states during fabrication of strongly-coupled cylindrical nanowires with varying degrees of overlap. By varying the separation between wires, the relative strength of exchange and magnetostatic coupling can be tuned. Hence, we observe the formation of six fundamental states as a function of both inter-wire separation and wire height. In particular, two complex three-dimensional magnetic states, a 3D Landau Pattern and a Helical domain wall, are observed to emerge for intermediate overlap. These two emergent states show complex spin configurations, including a modulated domain wall with both Néel and Bloch character. The competition of magnetic interactions and the parallel growth scheme we follow (growing both wires at the same time) favours the formation of these anti-parallel metastable states. This works shows how the engineering of strongly coupled 3D nanostructures with competing interactions can be used to create complex spin textures., This work was supported by the EPSRC and the Centre for Doctoral Training (CDT) in Photonic Integration and Advanced Data Storage (PIADS), RCUK Grant No. EP/L015323/1, the European Community under the Horizon 2020 Program, Contract No. 101001290 (3DNANOMAG), the MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1), and the Aragon Government through the Project Q-MAD. AH-R acknowledges the support from European Union's Horizon 2020 research and innovation program under Marie Skłodowska-Curie Grant ref. H2020-MSCA-IF-2016-746958, from the Spanish MICIN under Grant PID2019-104604RB/AEI/10.13039/501100011033 and from the Asturias FICYT under Grant AYUD/2021/51185 with the support of FEDER funds. CINN (CSIC—Universidad de Oviedo), El Entrego, Spain LS acknowledges support from the University of Cambridge (EPSRC Cambridge NanoDTC EP/L015978/1) DH acknowledges Unité Mixte de Physique, CNRS, Thales, Université Paris-Saclay, 91767, Palaiseau, France. CD acknowledges funding from the Max Planck Society Lise Meitner Excellence Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The 2022 magneto-optics roadmap

  • Kimel, Alexey
  • Zvezdin, Anatoly
  • Sharma, Sangeeta
  • Shallcross, Samuel
  • Sousa, Nuno de
  • García-Martín, Antonio
  • Salvan, Georgeta
  • Hamrle, Jaroslav
  • Stejskal, Ondřej
  • McCord, Jeffrey
  • Tacchi, Silvia
  • Carlotti, Giovanni
  • Gambardella, Pietro
  • Salis, Gian
  • Münzenberg, Markus
  • Schultze, Martin
  • Temnov, Vasily
  • Bychkov, Igor V.
  • Kotov, Leonid N.
  • Maccaferri, Nicolò
  • Ignatyeva, Daria
  • Belotelov, Vladimir
  • Donnelly, Claire
  • Hierro-Rodríguez, Aurelio
  • Matsuda, Iwao
  • Ruchon, Thierry
  • Fanciulli, Mauro
  • Sacchi, Maurizio
  • Du, Chunhui Rita
  • Wang, Hailong
  • Armitage, N. Peter
  • Schubert, Mathias
  • Darakchieva, Vanya
  • Liu, Bilu
  • Huang, Ziyang
  • Ding, Baofu
  • Berger, Andreas
  • Vavassori, Paolo
Magneto-optical (MO) effects, viz. magnetically induced changes in light intensity or polarization upon reflection from or transmission through a magnetic sample, were discovered over a century and a half ago. Initially they played a crucially relevant role in unveiling the fundamentals of electromagnetism and quantum mechanics. A more broad-based relevance and wide-spread use of MO methods, however, remained quite limited until the 1960s due to a lack of suitable, reliable and easy-to-operate light sources. The advent of Laser technology and the availability of other novel light sources led to an enormous expansion of MO measurement techniques and applications that continues to this day (see section 1). The here-assembled roadmap article is intended to provide a meaningful survey over many of the most relevant recent developments, advances, and emerging research directions in a rather condensed form, so that readers can easily access a significant overview about this very dynamic research field. While light source technology and other experimental developments were crucial in the establishment of today's magneto-optics, progress also relies on an ever-increasing theoretical understanding of MO effects from a quantum mechanical perspective (see section 2), as well as using electromagnetic theory and modelling approaches (see section 3) to enable quantitatively reliable predictions for ever more complex materials, metamaterials, and device geometries. The latest advances in established MO methodologies and especially the utilization of the MO Kerr effect (MOKE) are presented in sections 4 (MOKE spectroscopy), 5 (higher order MOKE effects), 6 (MOKE microscopy), 8 (high sensitivity MOKE), 9 (generalized MO ellipsometry), and 20 (Cotton–Mouton effect in two-dimensional materials). In addition, MO effects are now being investigated and utilized in spectral ranges, to which they originally seemed completely foreign, as those of synchrotron radiation x-rays (see section 14 on three-dimensional magnetic characterization and section 16 on light beams carrying orbital angular momentum) and, very recently, the terahertz (THz) regime (see section 18 on THz MOKE and section 19 on THz ellipsometry for electron paramagnetic resonance detection). Magneto-optics also demonstrates its strength in a unique way when combined with femtosecond laser pulses (see section 10 on ultrafast MOKE and section 15 on magneto-optics using x-ray free electron lasers), facilitating the very active field of time-resolved MO spectroscopy that enables investigations of phenomena like spin relaxation of non-equilibrium photoexcited carriers, transient modifications of ferromagnetic order, and photo-induced dynamic phase transitions, to name a few. Recent progress in nanoscience and nanotechnology, which is intimately linked to the achieved impressive ability to reliably fabricate materials and functional structures at the nanoscale, now enables the exploitation of strongly enhanced MO effects induced by light–matter interaction at the nanoscale (see section 12 on magnetoplasmonics and section 13 on MO metasurfaces). MO effects are also at the very heart of powerful magnetic characterization techniques like Brillouin light scattering and time-resolved pump-probe measurements for the study of spin waves (see section 7), their interactions with acoustic waves (see section 11), and ultra-sensitive magnetic field sensing applications based on nitrogen-vacancy centres in diamond (see section 17)., Despite our best attempt to represent the field of magneto-optics accurately and do justice to all its novel developments and its diversity, the research area is so extensive and active that there remains great latitude in deciding what to include in an article of this sort, which in turn means that some areas might not be adequately represented here. However, we feel that the 20 sections that form this 2022 magneto-optics roadmap article, each written by experts in the field and addressing a specific subject on only two pages, provide an accurate snapshot of where this research field stands today. Correspondingly, it should act as a valuable reference point and guideline for emerging research directions in modern magneto-optics, as well as illustrate the directions this research field might take in the foreseeable future., This work was supported by the Dutch Research Council (NWO) and the Russian Science Foundation (RSF, Grant No. 20-42-08002). Sharma would like to thank DFG for funding through TRR227 (Project A04). Shallcross would like to thank DFG for funding through SH498/4-1. This work is supported by the Ministerio de Ciencia e Innovación (Grant No. PID2019-109905GA-C22). This work was supported by the Deutsche Forschungsgemeinschaft (DFG) under the project 282193534. This work was supported by Czech Science Foundation (19- 13310S) and by OP VVV project MATFUN under Grant CZ.02.1.01/0.0/0.0/15_003/0000487. Continuous support by the German Science Foundation, especially through their Heisenberg professorship program (DFG MC9/9) and current funding from the Collaborative Research Centre SFB 1261 is highly acknowledged. The authors acknowledge financial support from the italian Ministery of University and Research through the PRIN-2020 project entitled ‘The Italian factory of micromagnetic modeling and spintronics’, cod. 2020LWPKH7. We acknowledge financial support from the NCCR QSIT and Grant No. 200020_200465 of the Swiss National Science Foundation. Work at nanoGUNE was supported by the Spanish Ministry of Science and Innovation under the Maria de Maeztu Units of Excellence Programme (CEX2020-001038-M) and Project No. RTI2018-094881-B-100 (MICINN/FEDER). Funding from the Agence Nationale de la Recherche (Grant ANR-15-CE24-0032—PPMI-NANO), the Russian Science Foundation (Project No. 21-72-20048) and the Russian Foundation of Basic Research (RFBR 20-07-00466) are gratefully acknowledged. P V acknowledges support from the Spanish Ministry of Science, Innovation and Universities under the Maria de Maeztu Units of Excellence Programme (CEX2020-001038-M) and the Project RTI2018-094881-B-I00 (MICINN/FEDER). N M acknowledges support from the Luxembourg National Research Fund (Grant No. C19/MS/13624497 ‘ULTRON’), the European Union under the FETOPEN-01-2018-2019- 2020 call (Grant No. 964363 ‘ProID’) and the Swedish Research Council (Grant No. 2021-05784). This work was financially supported by the Russian Ministry of Science and Higher Education of the Russian Federation, Megagrant Project No. 075-15-2022-1108. C D acknowledges the support of the Max Planck Society Lise Meitner Excellence Program. A H-R acknowledges the support of the Spanish AEI under project reference PID2019–220 104604RB/AEI/10.13039/501100011033. The research was made under the SACLA Basic Development Program 2018–2020. The development was also performed at the facilities of the Synchrotron Radiation Research Organization at the University of Tokyo. The review is based on the XFEL experiments at SACLA with the approval of the Japan Synchrotron Radiation Research Institute (JASRI). This work was supported by the French ANR under contracts ANR-10-LABX-0039 – PALM (Labex), ANR-11- EQPX0005 – ATTOLAB (Equipex), ANR-21-CE30-0037 – HELIMAG, the Scientific Cooperation Foundation of ParisSaclay University through the funding of the OPT2X research project (Lidex 2014), by the Ile-de-France region through the Pulse-X project, by the European Union’s Horizon 2020 Research and Innovation Programme No. EU-H2020- LASERLAB-EUROPE-654148, and by the Swiss SNSF (project P2ELP2_181877). The authors acknowledge the support from Air Force Office of Scientific Research under Award FA9550-21-1-0125. His recent work on this topic has been supported by ARO MURI W911NF2020166, NSF Grant DMR-1905519, and under the auspices of the Institute for Quantum Matter, an EFRC funded by the DOE BES under DE-SC0019331. We acknowledge support by the National Science Foundation Awards DMR 1808715, OIA-2044049, by Air Force Office of Scientific Research Awards FA9550-18-1-0360, FA9550-19- S-0003, and FA9550-21-1-0259, by the Knut and Alice Wallenbergs Foundation, by the University of Nebraska Foundation and the J A Woollam Foundation, by the Swedish Research Council VR Award No. 2016-00889, the Swedish Foundation for Strategic Research Grant Nos. RIF14-055 and EM16-0024, by the Swedish Governmental Agency for Innovation Systems VINNOVA under the Competence Center Program Grant No. 2016–05190, and by the Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linköping University, Faculty Grant SFO Mat LiU No. 2009-00971. We acknowledge support by the National Natural Science Foundation of China (No. 51920105002), the National Science Fund for Distinguished Young Scholars (No. 52125309), the Guangdong Innovative and Entrepreneurial Research Team Program (No. 2017ZT07C341), and the Shenzhen Basic Research Project (Nos. JCYJ20190809180605522 and WDZC20200819095319002).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Fourier-space generalized magneto-optical ellipsometry

  • Cascales Sandoval, Miguel A.
  • Hierro-Rodríguez, Aurelio
  • Sanz-Hernández, Dédalo
  • Skoric, Luka
  • Christensen, C. N.
  • Donnelly, Claire
  • Fernández-Pacheco, Amalio
The magneto-optical Kerr effect (MOKE) is a widely used lab-based technique for the study of thin films and nanostructures, providing magnetic characterization with good spatial and temporal resolutions. Due to the complex coupling of light with a magnetic sample, conventional MOKE magnetometers normally work by selecting a small range of incident wave-vector values, focusing the incident light beam to a small spot, and recording the reflected intensity at that angular range by means of photodetectors. This generally provides signals proportional to a mixture of magnetization components, requiring additional methodologies for full vectorial magnetic characterization. Here, we computationally investigate a Fourier-space MOKE setup, where a focused beam ellipsometer using high numerical aperture optics and a camera detector is employed to simultaneously map the intensity distribution for a wide range of incident and reflected wave-vectors. We employ circularly incident polarized light and no analyzing optics, in combination with a fitting procedure of the light intensity maps to the analytical expression of the Kerr effect under linear approximation. In this way, we are able to retrieve the three unknown components of the magnetization vector as well as the material's optical and magneto-optical constants with high accuracy and short acquisition times, with the possibility of single shot measurements. Fourier MOKE is thus proposed as a powerful method to perform generalized magneto-optical ellipsometry for a wide range of magnetic materials and devices., This work was supported by UKRI through an EP-SRC studentship, EP/N509668/1 and EP/R513222/1, the European Community under the Horizon 2020 Program, Contract No. 101001290 (3DNANOMAG), the MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1), and the Aragon Government through the Project Q-MAD. Aurelio Hierro-Rodríguez acknowledges the support by Spanish MICIN under grant PID2019-104604RB/AEI/10.13039/501100011033 and by Asturias FICYT under grant AYUD/2021/51185 with the support of FEDER funds. Dédalo Sanz-Hernández acknowledges funding from ANR/CNRS un- der the French "Plan Relance de l’etat" for the preservation of R&D. Luka Skoric acknowledges support from the EPSRC Cambridge NanoDTC EP/L015978/1. Charles N. Christensen acknowledges the UK EPSRC Centre for Doctoral Training in Sensor Technologies for a Healthy and Sustainable Future. Claire Donnelly acknowledges funding from the Max Planck Society Lise Meitner Excellence Program., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bloch points and topological dipoles observed by X-ray vector magnetic tomography in a ferromagnetic microstructure

  • Hermosa, Javier
  • Hierro-Rodríguez, Aurelio
  • Quirós, Carlos
  • Martín, José Ignacio
  • Sorrentino, Andrea
  • Aballe, Lucía
  • Pereiro, Eva
  • Vélez, María
  • Ferrer, Salvador
Bloch points are small 3D magnetic textures with unit topological charge that require the use of advanced vector imaging techniques for their direct experimental characterization. Here we show results from the reconstruction of the magnetization field m(r) of an elongated permalloy microstructure by X-ray vector magnetic tomography. A central asymmetric Bloch domain wall is observed, decorated by Bloch points arranged in several dipoles and a triplet. The analysis of the m(r) map in terms of topological concepts provides a quantitative description of the Bloch points as topological monopoles connected by bundles of emergent magnetic field lines carrying a fractional topological flux. It also reveals the topological constraints that determine chirality transitions of the central domain wall in the vicinity of Bloch points, independent of specific material properties. This approach could be readily extended to the study of magnetic microstructures in arbitrary remanent configurations., The ALBA Synchrotron is funded by the Ministry of Research and Innovation of Spain, by the Generalitat de Catalunya and by European FEDER funds. This project has been supported by Spanish MICIN under grant PID2019-104604RB/AEI/10.13039/501100011033 and by Asturias FICYT under grant AYUD/2021/51185 with the support of FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A fast magnetic vector characterization method for quasi two-dimensional systems and heterostructures

  • Herguedas Alonso, Alicia Estela
  • Aballe, Lucía
  • Fullerton, Janice
  • Vélez, María
  • Martín, José Ignacio
  • Sorrentino, Andrea
  • Pereiro, Eva
  • Ferrer, Salvador
  • Quirós, Carlos
  • Hierro-Rodríguez, Aurelio
The use of magnetic vector tomography/laminography has opened a 3D experimental window to access the magnetization at the nanoscale. These methods exploit the dependence of the magnetic contrast in transmission to recover its 3D configuration. However, hundreds of different angular projections are required leading to large measurement times. Here we present a fast method to dramatically reduce the experiment time specific for quasi two-dimensional magnetic systems. The algorithm uses the Beer-Lambert equation in the framework of X-ray transmission microscopy to obtain the 3D magnetic configuration of the sample. It has been demonstrated in permalloy microstructures, reconstructing the magnetization vector field with a reduced number of angular projections obtaining quantitative results. The throughput of the methodology is × 10–× 100 times faster than conventional magnetic vector tomography, making this characterization method of general interest for the community., The ALBA Synchrotron is funded by the Ministry of Research and Innovation of Spain, by the Generalitat de Catalunya and by European FEDER funds. This project has been supported by Spanish MICIN under grant PID2019-104604RB/AEI/***0.13039/501100011033 and by Asturias FICYT under grant AYUD/2021/51185 with the support of FEDER funds. J.F. acknowledges the support from EPSRC and the Centre for Doctoral Training (CDT) in Photonic Integration and Advanced Data Storage (PIADS), RCUK Grant No. EP/L015323/1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatially resolving the magnetic configuration of trilayer submicrometer disks with vortex chiral asymmetry using X-ray resonant magnetic scattering

  • Díaz, Javier
  • Álvarez-Prado, L. M.
  • Valvidares, S. M.
  • Montoya, I.
  • Redondo, Carolina
  • Morales, Rafael
  • Vélez, María
We show that, in the x-ray magnetic resonant scattering (XRMS) of a two-dimensional array of submicron magnets, the collected intensity at each Bragg reflection is correlated to the reflected light from locations of the magnets that have the same angle of curvature. This converts XRMS in a kind of magnetic microscope capable of spatially resolving the magnetization of the small-size magnets, averaged over the magnets illuminated by the x rays. This result is used to study the magnetization of trilayer submicron disk-shaped magnets consisting of two magnetostatically coupled ferromagnetic layers, about 15 nm thick, separated by a nonmagnetic spacer. These kinds of systems are less known than the single-layer ones, despite having potentially more interesting functionalities for device applications, mainly due to the difficulty to distinguish the magnetization of each of the layers within the magnets. This problem is overcome by XRMS thanks to its chemical sensitivity and its relatively large depth probe. XRMS is also a photon-in photon-out technique that allows measuring under external magnetic fields. This permits the extraction of the local hysteresis loops at different locations of the disks. The technique demonstrates to be very sensitive to the magnetization distribution across each of the layers at any field intensity, with an estimated lateral resolution below 200 nm. This serves to detect, and also explain, chiral asymmetries in the magnetic circulation of the vortex in each of the layers., This project is supported by Spanish MINECO under Grant No. PID2019-104604RB/AEI/10.13039/5011000 11033, and by Asturias FICYT under Grant No. AYUD/2021/51185 with the support of FEDER funds. R.M. acknowledges Basque Country Grant No. IT1491-22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fourier-space generalized magneto-optical ellipsometry

  • Cascales Sandoval, Miguel A.
  • Hierro-Rodríguez, Aurelio
  • Sanz-Hernández, Dédalo
  • Skoric, Luka
  • Christensen, C. N.
  • Donnelly, Claire
  • Fernández-Pacheco, Amalio
The magneto-optical Kerr effect (MOKE) is widely exploited in laboratory-based setups for the study of thin films and nanostructures, providing magnetic characterization with good spatial and temporal resolutions. Due to the complex coupling of light with a magnetic sample, conventional MOKE magnetometers normally work by selecting a small range of incident wave-vector values, focusing the incident light beam to a small spot, and recording the reflected intensity at that angular range by means of photodetectors. Using this approach, additional methodologies and measurements are required for full vectorial magnetic characterization. Here, we computationally investigate a Fourier-space MOKE setup, where a focused beam ellipsometer using high numerical aperture optics and a camera detector is employed to simultaneously map the intensity distribution for a wide range of incident and reflected wave vectors. We employ circularly incident polarized light and no analyzing optics, in combination with a fitting procedure of the light intensity maps to the analytical expression of the Kerr effect under linear approximation. In this way, we are able to retrieve the three unknown components of the magnetization vector as well as the material' s optical and magneto-optical constants with high accuracy and short acquisition times, with the possibility of single-shot measurements. Fourier MOKE is thus proposed as a powerful method to perform generalized magneto-optical ellipsometry for a wide range of magnetic materials and devices., This work was supported by UKRI through an EPSRC studentship, Grants No. EP/N509668/1 and No. EP/R513222/1, the European Community under the Horizon 2020 Program, Contract No. 101001290 (3DNANOMAG), the MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1), and the Aragon Government through the Project Q-MAD. A.H.-R. acknowledges the support by Spanish MICIN under Grant No. PID2019-104604RB/AEI/10.13039/501100011033 and by Asturias FICYT under Grant No. AYUD/2021/51185 with the support of FEDER funds. D. S.-H. acknowledges funding from ANR/CNRS under the French “Plan Relance de l’ etat” for the preservation of R&D. L.S. acknowledges support from the EPSRC Cambridge NanoDTC Grant No. EP/L015978/1. C.N.C. acknowledges the UK EPSRC Centre for Doctoral Training in Sensor Technologies for a Healthy and Sustainable Future. C.D. acknowledges funding from the Max Planck Society Lise Meitner Excellence Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Observation and formation mechanism of 360° domain wall rings in synthetic anti-ferromagnets with interlayer chiral interactions

  • Cascales Sandoval, Miguel A.
  • Hierro-Rodríguez, Aurelio
  • Ruiz-Gómez, Sandra
  • Skoric, Luka
  • Donnelly, Claire
  • Niño Orti, Miguel A.
  • Vedmedenko, E. Y.
  • McGrouther, D.
  • McVitie, Stephen
  • Flewett, S.
  • Jaouen, N.
  • Foerster, Michael
  • Fernández-Pacheco, Amalio
The data utilized to generate the figures shown in the text can be found at the Enlighten repository of the University of Glasgow: https://doi.org/10.5525/gla.researchdata.1511., The interlayer Dzyaloshinskii–Moriya interaction (IL-DMI) chirally couples spins in different ferromagnetic layers of multilayer heterostructures. So far, samples with IL-DMI have been investigated utilizing magnetometry and magnetotransport techniques, where the interaction manifests as a tunable chiral exchange bias field. Here, we investigate the nanoscale configuration of the magnetization vector in a synthetic anti-ferromagnet (SAF) with IL-DMI, after applying demagnetizing field sequences. We add different global magnetic field offsets to the demagnetizing sequence in order to investigate the states that form when the IL-DMI exchange bias field is fully or partially compensated. For magnetic imaging and vector reconstruction of the remanent magnetic states, we utilize x-ray magnetic circular dichroism photoemission electron microscopy, evidencing the formation of 360° domain wall rings of typically 0.5–3.0 μm in diameter. These spin textures are only observed when the exchange bias field due to the IL-DMI is not perfectly compensated by the magnetic field offset. From a combination of micromagnetic simulations, magnetic charge distribution, and topology arguments, we conclude that a non-zero remanent effective field with components both parallel and perpendicular to the anisotropy axis of the SAF is necessary to observe the rings. This work shows how the exchange bias field due to IL-DMI can lead to complex metastable spin states during reversal, important for the development of future spintronic devices., This work was supported by UKRI through an EPSRC studentship, Nos. EP/N509668/1 and EP/R513222/1, the European Community under the Horizon 2020 Program, Contract No. 101001290 (3DNANOMAG), the MCIN with funding from European Union NextGenerationEU (No. PRTR-C17.I1), and the Aragon Government through the Project Q-MAD. A.H.-R. acknowledges the support by Spanish MICIN under Grant No. PID2019-104604RB/AEI/10.13039/501100011033 and by Asturias FICYT under Grant No. AYUD/2021/51185 with the support of FEDER funds. S.R.-G. acknowledges the financial support of the Alexander von Humboldt foundation. L.S. acknowledges support from the EPSRC Cambridge NanoDTC No. EP/L015978/1. C.D. acknowledges funding from the Max Planck Society Lise Meitner Excellence Program. The ALBA Synchrotron is funded by the Ministry of Research and Innovation of Spain, by the Generalitat de Catalunya and by European FEDER funds. We acknowledge Synchrotron SOLEIL for providing the synchrotron radiation facilities (Proposal No. 20191674). S.M. acknowledges support from EPSRC Project No. EP/T006811/1. M.A.N. and M.F. acknowledge support from MICIN project PID2021-122980OB-C54., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fourier-space generalized magneto-optical ellipsometry

  • Cascales Sandoval, Miguel A.
  • Hierro-Rodríguez, Aurelio
  • Sanz-Hernández, Dédalo
  • Skoric, Luka
  • Christensen, C. N.
  • Donnelly, Claire
  • Fernández-Pacheco, Amalio
The magneto-optical Kerr effect (MOKE) is widely exploited in laboratory-based setups for the study of thin films and nanostructures, providing magnetic characterization with good spatial and temporal resolutions. Due to the complex coupling of light with a magnetic sample, conventional MOKE magnetometers normally work by selecting a small range of incident wave-vector values, focusing the incident light beam to a small spot, and recording the reflected intensity at that angular range by means of photodetectors. Using this approach, additional methodologies and measurements are required for full vectorial magnetic characterization. Here, we computationally investigate a Fourier-space MOKE setup, where a focused beam ellipsometer using high numerical aperture optics and a camera detector is employed to simultaneously map the intensity distribution for a wide range of incident and reflected wave vectors. We employ circularly incident polarized light and no analyzing optics, in combination with a fitting procedure of the light intensity maps to the analytical expression of the Kerr effect under linear approximation. In this way, we are able to retrieve the three unknown components of the magnetization vector as well as the material' s optical and magneto-optical constants with high accuracy and short acquisition times, with the possibility of single-shot measurements. Fourier MOKE is thus proposed as a powerful method to perform generalized magneto-optical ellipsometry for a wide range of magnetic materials and devices., This work was supported by UKRI through an EPSRC studentship, Grants No. EP/N509668/1 and No. EP/R513222/1, the European Community under the Horizon 2020 Program, Contract No. 101001290 (3DNANOMAG), the MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1), and the Aragon Government through the Project Q-MAD. A.H.-R. acknowledges the support by Spanish MICIN under Grant No. PID2019-104604RB/AEI/10.13039/501100011033 and by Asturias FICYT under Grant No. AYUD/2021/51185 with the support of FEDER funds. D. S.-H. acknowledges funding from ANR/CNRS under the French “Plan Relance de l’ etat” for the preservation of R&D. L.S. acknowledges support from the EPSRC Cambridge NanoDTC Grant No. EP/L015978/1. C.N.C. acknowledges the UK EPSRC Centre for Doctoral Training in Sensor Technologies for a Healthy and Sustainable Future. C.D. acknowledges funding from the Max Planck Society Lise Meitner Excellence Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Determination of optimal experimental conditions for accurate 3D reconstruction of the magnetization vector via XMCD-PEEM

  • Cascales Sandoval, Miguel A.
  • Hierro-Rodríguez, Aurelio
  • Ruiz-Gómez, Sandra
  • Skoric, Luka
  • Donnelly, Claire
  • Niño Orti, Miguel A.
  • McGrouther, D.
  • McVitie, Stephen
  • Flewett, S.
  • Jaouen, N.
  • Belkhou, Rachid
  • Foerster, Michael
  • Fernández-Pacheco, Amalio
This work presents a detailed analysis of the performance of X-ray magnetic circular dichroism photoemission electron microscopy (XMCD-PEEM) as a tool for vector reconstruction of magnetization. For this, 360° domain wall ring structures which form in a synthetic antiferromagnet are chosen as the model to conduct the quantitative analysis. An assessment is made of how the quality of the results is affected depending on the number of projections that are involved in the reconstruction process, as well as their angular distribution. For this a self-consistent error metric is developed which allows an estimation of the optimum azimuthal rotation angular range and number of projections. This work thus proposes XMCD-PEEM as a powerful tool for vector imaging of complex 3D magnetic structures., Open access funding enabled and organized by Projekt DEAL., This work was supported by UKRI through EPSRC studentships (EP/N509668/1 and EP /R513222/1), the European Community under the Horizon 2020 Programme [contract No. 101001290 (3DNANOMAG)], the Spanish MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and the Aragon Government through Project Q-MAD. A. Hierro-Rodriguez acknowledges support by the Spanish MICIN (grant Nos. PID2019-104604RB/AEI/10.13039/501100011033 and PID2022-136784NB) and by Asturias FICYT (grant AYUD/2021/51185) with the support of FEDER funds. S. Ruiz-Gómez acknowledges the financial support of the Alexander von Humboldt foundation. L. Skoric acknowledges support from the EPSRC Cambridge NanoDTC (studentship No. EP/L015978/1). C. Donnelly acknowledges funding from the Max Planck Society Lise Meitner Excellence Program. The ALBA Synchrotron is funded by the Ministry of Research and Innovation of Spain, by the Generalitat de Catalunya and by European FEDER funds. S. McVitie acknowledges support from the EPSRC (project EP/T006811/1). M. A. Niño and M. Foerster acknowledge support from MICIN (project No. PID2021-122980OB-C54)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hyperbolic Bloch points in ferrimagnetic exchange spring

  • Hermosa, Javier
  • Hierro-Rodríguez, Aurelio
  • Sorrentino, Andrea
  • Martín, José Ignacio
  • Álvarez-Prado, L. M.
  • Pereiro, Eva
  • Quirós, Carlos
  • Vélez, María
  • Ferrer, Salvador
Bloch points in magnetic materials are attractive entities in view of magnetic information transport. Here, Bloch point configuration has been investigated and experimentally determined in a magnetic trilayer (Gd12Co88/ Nd17Co83/Gd24Co76) with carefully adjusted composition within the ferrimagnetic GdxCo1-x alloys in order to engineer saturation magnetization, exchange length, and interlayer couplings (ferromagnetic vs antiferromagnetic). X-ray vector magnetic tomography has allowed us to determine experimentally Bloch point polarity (related to topological charge) and Bloch point helicity γ (determined by magnetostatic energy). At the bottom layer (close to the ferromagnetic interface), Bloch points adopt a standard circulating configuration with helicity γ close to π/2. Within the top layer (with much lower saturation magnetization), Bloch points nucleate within a Neel-like exchange spring domain wall created by the antiferromagnetic coupling and adopt an uncommon hyperbolic configuration, characterized by much larger helicity angles. Our results indicate a path for Bloch point engineering in future applications adjusting material parameters and domain wall characteristics., The ALBA Synchrotron is funded by the Ministry of Research and Innovation of Spain, by the Generalitat de Catalunya and by European FEDER funds. This work has been supported by Spanish MCIN/ AEI/10.13039/501100011033/FEDER,UE under grants PID2019-104604RB and PID2022-136784NB and by Asturias FICYT under grant AYUD/2021/51185 with the support of FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

DATA from research paper "Hyperbolic Bloch points in ferrimagnetic exchange spring"

  • Hermosa, Javier
  • Hierro-Rodríguez, Aurelio
  • Sorrentino, Andrea
  • Martín, José Ignacio
  • Álvarez-Prado, L. M.
  • Pereiro, Eva
  • Quirós, Carlos
  • Vélez, María
  • Ferrer, Salvador
The ALBA Synchrotron is funded by the Ministry of Research and Innovation of Spain, by the Generalitat de Catalunya and by European FEDER funds. This work has been supported by Spanish MCIN/AEI/10.13039/501100011033/FEDER,UE under grants PID2019-104604RB and PID2022-136784NB and by Asturias FICYT under grant AYUD/2021/51185 with the support of FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2024 roadmap on magnetic microscopy techniques and their applications in materials science

  • Christensen, Dennis Valbjørn
  • Fischer, Peter
  • Hierro-Rodríguez, Aurelio
  • Finizio, Simone
  • Dhesi, Sarnjeet
D.V. Christensen et al., 8. X-ray techniques 8.1. Magnetic x-ray microscopies in real space., Considering the growing interest in magnetic materials for unconventional computing, data storage, and sensor applications, there is active research not only on material synthesis but also characterisation of their properties. In addition to structural and integral magnetic characterisations, imaging of magnetisation patterns, current distributions and magnetic fields at nano- and microscale is of major importance to understand the material responses and qualify them for specific applications. In this roadmap, we aim to cover a broad portfolio of techniques to perform nano- and microscale magnetic imaging using superconducting quantum interference devices, spin centre and Hall effect magnetometries, scanning probe microscopies, x-ray- and electron-based methods as well as magnetooptics and nanoscale magnetic resonance imaging. The roadmap is aimed as a single access point of information for experts in the field as well as the young generation of students outlining prospects of the development of magnetic imaging technologies for the upcoming decade with a focus on physics, materials science, and chemistry of planar, three-dimensional and geometrically curved objects of different material classes including two-dimensional materials, complex oxides, semi-metals, multiferroics, skyrmions, antiferromagnets, frustrated magnets, magnetic molecules/nanoparticles, ionic conductors, superconductors, spintronic and spinorbitronic materials., European Research Council (ERC) Advanced ‘NEXUS’ Grant 101054572. TRD and BK were supported by ERC Grant No.ERC-2019-COG-866236. ERC consolidator Grant Project QS2DM. This project has received funding from the ERC under the European Union’s Horizon 2020 Research and Innovation Programme (Grant Agreement Nos. 818399 and 947717). P Facknowledges support by the US DOE, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division under Contract No. DE-AC02-05-CH11231 (NEMM program MSMAG). AH-Racknowledges support by Spanish MICIN under Grant PID2019-104604RB/AEI/10.13039/ 501100011033 and by Asturias FICYT under Grant AYUD/2021/51s185 with the support of FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Remote-sensing based control of 3D magnetic fields using machine learning for in operando applications

  • Cascales Sandoval, Miguel A.
  • Jurczyk, Jakub
  • Skoric, Luka
  • Sanz-Hernández, Dédalo
  • Leo, Naëmi
  • Schrefl, Thomas
  • Hierro-Rodríguez, Aurelio
  • Fernández-Pacheco, Amalio
In operando techniques enable real-time measurement of intricate physical properties at the micro- and nano-scale under external stimuli, allowing the study of a wide range of materials and functionalities. In nanomagnetism, in operando techniques greatly benefit from precise three-dimensional (3D) magnetic field control, enabling access to complex magnetic states forming in systems where multiple energies are set to compete with each other. However, achieving such precision is challenging and uncommon, as specific applications impose constraints on the type and geometry of magnetic field sources, limiting their capabilities. Here, we introduce an approach that leverages machine learning algorithms to achieve precise 3D magnetic field control using a hexapole electromagnet that is composed of three independent, non-collinear dipole electromagnets. In our experimental setup, magnetic field sensors are placed at a distance from the sample position due to inherent constraints, leading to indirect field measurements that differ from the magnetic field experienced by the sample. We find that the existing relationship between the remote and sample frames of reference is non-linear, thus requiring a more complex calibration method. To address this, we employ a multi-layer perceptron neural network that processes multiple inputs from a dynamic magnetic field sequence, effectively capturing the time-dependent non-linear field response. The network achieves high calibration accuracy and demonstrates exceptional generalization to unseen magnetic field sequences. This study highlights the significant potential of machine learning in achieving high-precision control and calibration, crucial for in operando experiments where direct measurement at the point of interest is not possible., This work was supported by the European Community under the Horizon 2020 Program, Contract No. 101001290 (3DNANOMAG). The raw data supporting the findings of this study will be openly available at a repository from TU Wien. A.H.-R. acknowledges support by the Spanish MICIN (Refs. MICIN/AEI/10.13039/501100011033/FEDER, UE under Grant Nos. PID2019-104604RB and PID2022-136784NB) and by Asturias FICYT (Grant No. AYUD/2021/51185) with the support of FEDER funds. L.S. acknowledges support from the EPSRC Cambridge NanoDTC EP/L015978/1. For the purpose of open access, the author(s) has applied a Creative Commons Attribution (CC-BY) licence to any Author Accepted Manuscript version arising from this submission. The financial support by the Austrian Federal Ministry of Labour and Economy, the National Foundation for Research, Technology and Development, and the Christian Doppler Research Association is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain-induced exciton redistribution among quantum emitters in two-dimensional materials

  • Ronco, Giuseppe
  • Martínez-Suárez, Abel
  • Tedeschi, Davide
  • Savaresi, Matteo
  • Hierro-Rodríguez, Aurelio
  • McVitie, Stephen
  • Stroj, Sandra
  • Aberl, Johannes
  • Brehm, Moritz
  • García-Suárez, Víctor M.
  • Rota, Michele B.
  • Alonso-González, Pablo
  • Martín-Sánchez, Javier
  • Trotta, Rinaldo
The data that support the findings of this study are available from the corresponding author upon reasonable request., The discovery of quantum emitters (QEs) in two-dimensional (2D) materials has triggered a surge of research to assess their suitability for quantum photonics. Although position-controlled QEs are routinely fabricated using static strain gradients, the use of dynamic strain fields to control the brightness of QEs has not been explored yet. Here, we address this challenge by introducing a novel device in which WSe2 monolayers are integrated onto piezoelectric pillars that provide both static and dynamic strains. The static strains are first used to induce the formation of QEs, while their energy and brightness are then controlled via voltages on piezoelectric pillars. Numerical simulations show that these effects are due to a strain-induced modification of the confining-potential landscape, which leads to a net redistribution of excitons among the different QEs. Our work provides a method to dynamically control the energy and brightness of QEs in 2D materials., This work was financially supported by the MUR (Ministero dell' Università e della ricerca) via the FARE project 2018 n. R188ECR2MX (STRAIN2D), and the QuantERA project, QUANTERA Call 2021, EQUAISE. J.M.-S. acknowledges financial support from the Spanish Ministry of Science and Innovation (grant number PID2023-148457NB-I00 funded by MCIN/AEI/10.13039/501100011033 and FSE+, PCI2022-132953 funded by MCIN/AEI/10.13039/501100011033 and the EU “NextGenerationEU”/PRTR, CNS2024-154342 funded by MICIU/AEI /10.13039/501100011033”). A.H.-R. and S.M. acknowledge support from the European Union’s Horizon 2020 research and innovation program under Marie Skłodowska-Curie grant H2020-MSCA-IF-2016-746958. A.H.-R. acknowledges funding from the Spanish AEI under project PID2019–104604RB/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preservation of scalar spin chirality across a metallic spacer in synthetic antiferromagnets with chiral interlayer interactions

  • Cascales Sandoval, Miguel A.
  • Hierro-Rodríguez, Aurelio
  • Ruiz-Gómez, Sandra
  • Skoric, Luka
  • Niño, Miguel Ángel
  • McVitie, Stephen
  • Flewett, Samuel
  • Foerster, Michael
  • Vedmedenko, Elena Y.
The raw data supporting the findings of this study will be openly available at a repository from TU Wien., Chiral magnetic textures are key for the development of modern spintronic devices. In multilayered thin films, these are typically stabilized via the interfacial intralayer Dzyaloshinskii-Moriya interaction (DMI). Additionally, it has been recently observed that DMI may also promote vector spin chirality along the third dimension, coupling spins in different magnetic layers via nonmagnetic spacer layers, an effect referred to as interlayer DMI (IL-DMI). This interaction holds promise for 3D nanomagnetism, from the creation of 3D spin structures such as hopfions to new forms of magnetic functionality in the vertical direction via remote control of chiral spin states. In this work, we provide direct experimental evidence that the in-plane vector spin chirality of magnetic textures within a ferromagnetic layer can be controlled via the net out-of-plane spin configuration of an adjacent one. Both ferromagnetic layers form part of a synthetic antiferromagnet, previously shown to have IL-DMI. This in-plane vector chirality dependence on the out-of-plane configuration of another layer implies that the overall scalar spin chirality is preserved when computed across layers. We draw these conclusions from a combination of magnetic x-ray scattering and imaging experiments, complemented by various simulations. These findings thus uncover a type of chiral interlayer interactions, which can lead to the formation of intricate spin states across a metallic interface, demonstrating other ways to control magnetic chirality in three dimensions., This work was supported by the European Community under the Horizon 2020 Program, Contract No. 101001290 (3DNANOMAG), and UKRI through an EPSRC studentship, EP/N509668/1 and EP/R513222/1. A.H.-R. acknowledges support by the Spanish MICIN (Refs. MICIN/AEI/ 10.13039/501100011033/FEDER, UE under Grants No. PID2019-104604RB and No. PID2022-136784NB) and by Asturias FICYT (Grant No. AYUD/2021/51185) with the support of FEDER funds. S.R-G. acknowledges the financial support of the Alexander von Humboldt Foundation. L.S. acknowledges support from the EPSRC Cambridge NanoDTC EP/L015978/1. The ALBA Synchrotron is funded by the Ministry of Research and Innovation of Spain, by the Generalitat de Catalunya and by European FEDER funds. S.M. acknowledges support from EPSRC Project No. EP/T006811/1. M.A.N. and M.F. acknowledge support from MICIN Project No. PID2021-122980OB-C54. E.Y.V. acknowledges financial support provided by the Deutsche Forschungsgemeinschaft (DFG) via Project No. 514141286., The authors acknowledge TU Wien Bibliothek for financial support through its Open Access Funding Program., Technischen Universität Wien, Peer reviewed