Pasar al contenido principal

TECNOLOGIAS PARA EL RECICLADO DE PLASTICO

PID2019-105359RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Adsorption of PAHs and PCDD/Fs in Microplastics: A Review

  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
The presence of microplastics (MPs) in the environment, and the effects that the ingestion of these materials can have on organisms, can be aggravated by the adsorption of harmful substances on the surface or inside the MPs. Of special relevance are the studies that have been carried out on the adsorption and transport of polycyclic aromatic hydrocarbons (PAHs) as well as persistent organic pollutants (POPs) such as dioxins and furans (PCDD/Fs). This review will delve into the research carried out to date regarding the adsorption by conventional and biodegradable MPs of dangerous organic compounds such as those mentioned. In general, the presence of MPs is considered a vector for the entry of these contaminants into living beings, since their capacity to adsorb contaminants is very high and they are ingested by different organisms that introduce these contaminants into the trophic chain.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Technologies for plastic recycling

  • Berkane, Imene
The global production of plastic is continuously increasing, primarily due to its extensive use in the packaging sector. The demand for high-quality materials in packaging, combined with the low cost of virgin polymers compared to recycled materials, has led to a preference for new plastics. Additionally, the low quality of recycled plastics —often resulting from the complexity of the plastic waste stream, especially packaging waste— makes them unsuitable for sensitive applications like food packaging. This situation results in low recycling rates for this type of waste and increased landfilling and incineration rates. These practices significantly contribute to climate change and global warming due to the high gas emissions they generate. Therefore, there is an urgent need to close the loop on plastic waste and achieve circular economy targets. The complexity in the composition and properties of packaging waste poses significant challenges in the mechanical recycling process. Key challenges include sorting and separating the different fractions within the waste stream, dewatering the plastic flakes (especially flexible plastic flakes), and decontaminating the recycled material, as the plastic often arrives at recycling facilities contaminated with various impurities, wood, paper dust, and organic contaminants. Multilayer packaging often consists of various polymeric layers, adhesives, inks, and metallic layers such as aluminum. The properties of these materials, along with the lack of appropriate infrastructure, make recycling through mechanical processes very challenging. Optimizing certain processes and adding additional pretreatment steps, such as delamination and decontamination, are required to address these challenges. The goal of this PhD thesis is to study and gain insights into several processes involved in the mechanical recycling of plastic packaging. The focus is on improving the recyclability of these types of plastic waste by developing new methods that could be promising approaches for closed-loop recycling of plastic packaging waste. The first chapter of this PhD thesis introduces the possibilities of a circular economy for plastic packaging. It provides an overview of the current waste management routes for plastic waste, discussing their limitations and advantages. This chapter also reviews the state-of-the-art of mechanical recycling processes, outlining the main processes used and highlighting the weak VIII points and uncertainties of each process in handling flexible plastic packaging. The second chapter addresses the objectives of this research and discusses the outline of the thesis. Chapter 3 presents the results of an in-depth study on dry separation, a cost-effective technique that needs evaluation for its application in plastic recycling. The study models the air classification process to separate plastic flake mixtures and uses image analysis to characterize particle shape and size. Different drag models and experimental data were employed to investigate the behavior of these particles. The study conducted separations of various plastic flake mixtures, including rigid/rigid, rigid/film, and film/film combinations. Dioguardi et al.'s drag model has proved most effective for predicting film plastic behavior , while Wu and Wang’s model accurately has predicted rigid plastic behavior. Multiple regression models have been tested and validated to predict the separation curve of the plastic mixture. The drying of flexible plastic is a highly energy-consuming process that significantly affects the quality of the recycled product. Despite its importance, this operation has not been extensively studied at the laboratory or pilot plant scale. In Chapter 4, the thermal drying of flexible plastic is assessed using two laboratory thermal drying systems to evaluate convective drying in fixed and fluidized beds. The study examines the influence of the drying system, plastic flake size, air velocity, and initial moisture content to optimize the process. It concludes that fluidized bedthermal drying is the most effective one for removing moisture from plastic flakes, with drying kinetics similar to those of agricultural products and sludge. Heat transfer has been identified as the critical transport phenomenon in drying flexible plastics. Evaluating the safety of recycled plastic packaging is crucial for identifying recycled plastic as a viable upcycling material, particularly for sensitive applications like food-contact materials. Chapter 5 focuses on examining the decontamination process of polyethylene plastic in accordance with the European Food Safety Authority (EFSA) challenge test for food-contact recycled polyethylene. Various washing media were tested, and their decontamination kinetics were studied to determine their effectiveness. The general results from this study indicate that the most effective washing media for removing contaminants from plastic are those with a high affinity for both the plastic material and the contaminants, facilitating easier migration of contaminants from the plastic matrix into the solution. The heterogeneous composition of multilayer packaging and the lack of viable recycling solutions complicate its recyclability. The primary obstacle in recycling multilayer packaging (MLP) waste is the separation of its various polymeric and non-polymeric layers and the removal of the printed layer. Chapters 6 and 7 focus on improving the delamination process of multilayer packaging to enhance recyclability by recycling each plastic layer type separately. An innovative technique involving surface modification has been proposed and demonstrated to enhance the diffusivity of the dissolution agent through the inner layer. Chapter 6 begins with the investigation of the microperforation technique, examining different approaches such as microperforation densi ty, temperature influence, surfactant use, and the presence of a printed layer in the material. In Chapter 7, three different surface modification techniques —mechanical microperforation, laser microperforation, and abrasion— are investigated and compared for their effectiveness in improving the delamination process. The results show that all three surface modification techniques significantly enhance the penetration of the dissolution agent into the inner adhesive layer, thereby improving the delamination process. Overall, this work provides systematic data to improve the mechanical recycling of plasticpackaging waste. It offers a comprehensive study of the key processes involved in mechanical recycling, enhancing the understanding of the challenges faced in recycling plastic packaging. Innovative solutions have been proposed to optimize these processes and increase the recycling rate of plastic packaging.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Contaminantes peligrosos en plásticos reciclados y tratamientos para su mitigación

  • Nuñez, Samuel S.
  • Nuñez, Samuel S.|||/items/045fd300-7c5a-45c4-8341-e9df7661816a
Los plásticos han llegado a ser una parte integral de nuestra vida cotidiana, desplegando una amplia gama de beneficios en diversos aspectos. A pesar de su contribución positiva al aumento de nuestro nivel de vida, la persistencia y la gestión inadecuada de los plásticos plantean desafíos significativos para el medio ambiente. En aras de avanzar hacia una economía circular más sostenible, es imperativo aumentar la proporción de plástico reciclado. En este sentido, se enfoca en la necesidad de obtener plásticos reciclados de alta calidad, libres de contaminantes. Para conseguirlo, en esta investigación se desarrolló un método analítico que permite cuantificar diversos contaminantes, como los hidrocarburos aromáticos policíclicos (PAHs), los dioxinas y furanos policlorados (PCDD/Fs), los bifenilos policlorados similares a dioxinas (PCBs) y distintos tipos de bisfenoles (BPA, BPS, BPF y BPM). Con el método analítico establecido y tras verificar la presencia de diferentes niveles de contaminantes, se procedió a investigar un proceso óptimo de descontaminación. Se exploraron varias técnicas y se identificó un método que, mediante condiciones de temperatura moderadas y el uso de solventes o reactivos no perjudiciales para el medio ambiente, logró reducir de manera significativa el contenido de contaminantes en el plástico reciclado. Este avance representa un hito importante, ya que podría permitir que el plástico reciclado posea propiedades iguales a las del plástico virgen, abriendo así nuevas posibilidades de aplicación en mercados previamente inaccesibles. Este proceso de descontaminación tiene el potencial de ampliar significativamente el uso de plásticos reciclados en diversas aplicaciones, contribuyendo así a la transición hacia una economía más circular y sostenible. Este estudio, por tanto, no solo aborda la necesidad crítica de mejorar la gestión de los plásticos y reducir su impacto ambiental, sino que también ofrece una solución innovadora y práctica para hacer frente a este desafío. Además, sienta las bases para futuras investigaciones y desarrollos en el campo del reciclaje de plásticos y la gestión de contaminantes, con el objetivo último de promover un futuro más limpio, seguro y sostenible para las generaciones venideras.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Heavy metals, PAHs and POPs in recycled polyethylene samples of agricultural, post-commercial, post-industrial and post-consumer origin

  • Nuñez, Samuel S.
  • Moltó Berenguer, Julia
  • Conesa, Juan A.
  • Fullana, Andres
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
  • Moltó Berenguer, Julia|||/items/ee127754-2fe3-40b4-ab26-aab2d347ad60
  • Nuñez, Samuel S.|||/items/045fd300-7c5a-45c4-8341-e9df7661816a
In the present work, recycled polyethylene (LDPE) samples of agricultural, post-commercial, post-industrial and post-consumer origin were selected and analysed. The analysis comprised the determination of different contaminants such as metals, polycyclic aromatic hydrocarbons (PAHs), dioxin-like biphenyl polychlorides (PCBs), and polychlorinated-dibenzo-p-dioxins and furans (PCDD/Fs). A comparison with one sample of virgin plastic (unrecycled) was performed. The study aimed at stressing the importance of this type of analysis in recycled plastics. Indeed, such an examination will determine the material’s final destination, and the possible origin of the pollutants analysed is investigated. Black post-industrial and post-consumer samples presented the highest concentration of PCBs and PCDD/Fs, attaining a maximum value of 2.40 pg WHO-TEQ/g, while the least toxic sample (post-commercial) presented a toxicity of 0.38 pg WHO-TEQ/g. PAHs content was also much higher in black samples, reaching 514.41 ng/g, while the lowest concentrations were obtained for the post-commercial plastic sample, which did not exceed 38.98 ng/g. The higher PAHs concentrations in the black samples were related to the carbon black content of the black samples, which was 2.00% for black post-industrial sample and 1.51% for post-consumer sample. The PCDD/Fs congener profile observed in almost all samples was very similar to the profile found in the literature on urban air samples, indicating that the plastic is mainly influenced by the environment. The presence of some metals (mainly copper) showed a slight correlation with PCDD/Fs content. The pollutants analysed were found to be significantly reduced during the cleaning processes that are generally carried out in recycling companies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Improvement of multilayer plastic delamination using surface modification

  • Berkane, Imene
  • Aracil, Ignacio
  • Fullana, Andres
  • Aracil, Ignacio|||/items/0485586f-35e8-4be9-b931-2b960ed728d9
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
Multilayer flexible packaging waste (MFPW) represents a critical issue in the field of waste management. The heterogeneous composition of this type of plastic makes its recyclability challenging. In this context, the delamination process appears to be a promising way to recycle the polymers layers separately. However, this process is still limited for a few MFPW. This work propose an innovative way to improve the delamination process using three surface modification techniques (mechanical and laser microperforation (µP), and abrasion) on the MFPW surface in order to accelerate the diffusion of the dissolving agent. The delamination was tested in a 10 % sodium hydroxide solution at 25ºC. Under this study, the mechanical µP and the abrasion gave the best results of delamination compared to the laser µP (total delamination in 25 min vs 45 min, respectively). It was concluded that the distance between the microholes was an important factor in both µP techniques.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Debromination and Reusable Glass Fiber Recovery from Large Waste Circuit Board Pieces in Subcritical Water Treatment

  • Gandon-Ros, Gerard
  • Aracil, Ignacio
  • Gómez-Rico, María Francisca
  • Conesa, Juan A.
  • Aracil, Ignacio|||/items/0485586f-35e8-4be9-b931-2b960ed728d9
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Gómez-Rico, María Francisca|||/items/858ecde1-f676-4a71-982c-77a0fbb2c21c
The great economic, social, and environmental interest that favors an effective management of the recycling of waste printed circuit boards (WCBs) encourages research on the improvement of processes capable of mitigating their harmful effects. In this work, the debromination of large WCBs was first performed through a hydrothermal process employing potassium carbonate as an additive. A total of 32 runs were carried out at 225 °C, various CO32–/Br– anionic ratios of 1:1, 2:1, 4:1, and 6:1, treatment times from 30 to 360 min, proportion of submerged WCBs in the liquid of 100, 50, and 25% that corresponded with the use of three WCB sizes of 20 mm × 16.5 mm, 20 mm × 33 mm, and 80 mm × 33 mm, respectively, and solid/liquid ratios of 1:2 and 1:1 g/mL without other metallic catalysts. A debromination efficiency of 50 wt % was reached at only 225 °C (limited by mechanical reasons) and 360 min, using a CO32–/Br– anionic ratio of 4:1 and a solid/liquid ratio of 1:2 for a large WCB with only 25% of its volume submerged in the liquid. This means conservation of water and energy compared to previous studies. A muffle furnace was used later to thermally treat a total of 101 debrominated samples, at constant temperature or following a temperature scaling program. An estimated decrease in resistance to rupture of glass fibers of only around 50% was accomplished by following a temperature scaling program up to 475 °C, obtaining clean glass fibers of large size. The simple techniques proposed to obtain reusable glass fibers from WCBs as large as the size of the reactor allows (as it might be in their original size) could significantly improve interest in the industry.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Reuse of Water Contaminated by Microplastics, the Effectiveness of Filtration Processes: A Review

  • Conesa, Juan A.
  • Ortuño García, Nuria
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Ortuño García, Nuria|||/items/68c15f25-0107-4894-8ba6-f24e238c77f7
Water treatment generally does not specifically address the removal of microplastics (MPs). Nevertheless, treatment plants process water effectively, and the number of synthetic microparticles in effluents is usually very low. Still, discharge volumes from water-treatment plants are often elevated (reaching around 108 L/day), leading to the daily discharge of a substantial number of MPs and microfibers. Furthermore, MPs accumulate in the primary and secondary sludge, which in the end results in another environmental problem as they are currently used to amend soils, both for cultivation and forestry, leading to their dispersion. Something similar occurs with the treatment of water intended for human consumption, which has a much lower but still significant number of MPs. The amount of these pollutants being released into the environment depends on the processes that the water undergoes. One of the most-used treatment processes is rapid sand filtration, which is reviewed in this article. During the filtration process, MPs can break into smaller pieces, resulting in a greater number of plastic particles which mainly accumulate in sewage sludge. Thermal processes, such as incineration, carried out in facilities with the best available techniques in practice, could guarantee the safe disposal of highly MP-contaminated sewage sludges.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sewage Sludge as Inhibitor of the Formation of Persistent Organic Pollutants during Incineration

  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
With the objective of suppressing dioxins and furans (PCDD/Fs) emission in municipal solid waste incineration plants (MSWI), different chemical inhibitors have been tested. Among these inhibitors, nitrogen and sulphur compounds can significantly suppress PCDD/Fs formation via de novo synthesis, which gives very interesting results with very little capital investment. In recent years, the possibility of using waste rich in nitrogen and/or sulphur as a source of inhibitor compounds has been considered, and thus has reduced the emissions of pollutants while the waste is treated. The effect of adding sludge from urban sewage treatment plants in three variants has been specially studied: directly mixing the waste, using the decomposition gas of the previously dried sludge, and using the decomposition gas of the sludge together with other inhibitors such as thiourea. Reduction of emissions in laboratory tests using model samples indicated the efficiency to be higher than 99%, using sewage sludge (SS) as an inhibitor whereas, in actual MSWI plants, the efficiency can be as high as 90%.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The delamination of metalized multilayer flexible packaging using a microperforation technique

  • Berkane, Imene
  • Cabanes, Andrea
  • Horodytska, Oksana
  • Aracil, Ignacio
  • Fullana, Andres
  • Aracil, Ignacio|||/items/0485586f-35e8-4be9-b931-2b960ed728d9
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
Multilayer flexible packaging waste is a critical issue in the field of waste management as it is considered a non-recyclable material. One of the solutions to increase its recyclability is the delamination, which allows the recycling of the different polymer layers separately. This study investigated the optimization of the delamination by microperforating this plastic. The diffusion model was described by Fick's first law. The delamination process was tested at three different temperatures (50, 65 and 80 °C) with caustic soda. In addition, the influence of other parameters such as the thickness of aluminium layer, the presence of inks and the use of surfactants was tested. As a result, the microperforation technique improved the delamination rate by decreasing the residence time by 83% at the optimum conditions studied, being the thickness of the metal and the temperature essential factors affecting the process. However, the presence of inks and surfactant had no effect.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Numerical Integration of Weight Loss Curves for Kinetic Analysis

  • Conesa, Juan A.
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
Research abounds in the literature on kinetic analyses using thermogravimetric (TG) runs. Many of these studies use approximations of integral or derivative forms of the kinetic law and all of them use programmed temperatures. In the present work, a numerical integration procedure was discussed and applied to different examples. We focused on materials presenting a single decomposition curve as well as other materials with more complex processes. Different examples were explored, and the methodology was applied to a number of wastes such as coffee husks, polystyrene and polyethylene. In all cases, the actual temperature measured by thermocouples close to the sample is used, and several runs are fitted using the same kinetic parameters, giving robustness to the results.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Evaluation of thermal drying for the recycling of flexible plastics

  • Berkane, Imene
  • Aracil, Ignacio
  • Fullana, Andres
  • Aracil, Ignacio|||/items/0485586f-35e8-4be9-b931-2b960ed728d9
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
The drying of flexible plastic waste is a current industrial problem in the plastic recycling sector. The thermal drying of plastic flakes is considered the most expensive and the most energy-consuming step in the recycling chain, which represents an environmental issue. This process is already present on the industrial scale but not well described in the literature. A better understanding of this process for this material will lead to the design of environmentally efficient dryers with an improved performance. The objective of this research was to investigate the behavior of flexible plastic in a convective drying process at a laboratory scale. The focus was to study the factors affecting this process such as velocity, moisture, size and thickness of the plastic flakes in both fixed and fluidized bed systems and to develop a mathematical model for predicting the drying rate considering heat and mass transfer of convective drying. Three models were investigated: the first one was based on a kinetic correlation of the drying, and the second and third models were based on heat and mass transfer mechanisms, respectively. It was found that heat transfer was the predominant mechanism of this process, and the prediction of the drying was possible. The mass transfer model, on the other hand, did not give good results. Amongst five semi-empirical drying kinetic equations, three equations (Wang and Singh, logarithmic and 3rd-degree polynomial) provided the best prediction for both fixed and fluidized bed systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Associations of paternal serum dioxin-like polychlorinated biphenyl concentrations on IVF success: A pilot study

  • Paul, Raiza
  • Romero, Alejandro
  • Moltó Berenguer, Julia
  • Ortuño García, Nuria
  • Aizpurua, Jon
  • Gómez-Torres, María José
  • Gómez-Torres, María José|||/items/98e76526-8bb1-4710-9b76-59f6fadc332c
  • Moltó Berenguer, Julia|||/items/ee127754-2fe3-40b4-ab26-aab2d347ad60
  • Ortuño García, Nuria|||/items/68c15f25-0107-4894-8ba6-f24e238c77f7
  • Romero, Alejandro|||/items/b302b8a7-45cd-4efd-a466-8fc7aab2e97b
Dioxin-like polychlorinated biphenyls (DL-PCBs) are environmental pollutants that have been associated with impaired semen quality. However, research on the potential impact of paternal exposure to DL-PCBs and the risk of adverse pregnancy outcomes are limited. We examine the relationship between serum DL-PCB concentrations and IVF outcomes among 42 males seeking fertility treatment. Concentrations of 12 serum DL-PCBs were analyzed by high-resolution gas chromatography coupled to high-resolution mass spectrometry. Modified Poisson regressions, adjusted for confounders, were used to assess bivariate associations and to estimate risk ratios (RRs) between DL-PCBs and binary IVF outcomes. The median concentration (25th-75th percentiles) of the sum of the 12 DL-PCBs (∑DL-PCBs) obtained for the patients was 5.42 (3.78–7.78) ng/g lipid. No statistically significant association between DL-PCB levels and embryo quality was found. However, men with high serum PCB-77 concentrations present more probability of high-quality embryos (RR: 0.292; 95% CI: 0.090–0.942), whereas the opposite trend is observed for men with lower serum levels of PCB-156 (RR: 7.960; 95% CI: 1.020–62.100), who present increased odds of high-quality embryos. Serum concentrations of PCB-126 and PCB-114 were associated with decreased implantation rates (p < 0.05). Moreover, PCB-77 and ∑non-ortho PCBs were significantly associated with a lower likelihood of clinical pregnancy (p < 0.05). A lower likelihood of live birth was associated with higher levels of PCB-77, PCB-105, PCB-118, and recording significant differences for ∑non-ortho PCBs, ∑mono-ortho PCBs, and ∑DL-PCBs (p < 0.05). These findings suggest that paternal DL-PCB exposure before conception may be related to pregnancy endpoints. However, DL-PCB measurement were limited to male partners. Therefore, we propose that future studies with larger population sizes should include both maternal and paternal factors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mechanochemical debromination of waste printed circuit boards with marble sludge in a planetary ball milling process

  • Gandon-Ros, Gerard
  • Aracil, Ignacio
  • Gómez-Rico, María Francisca
  • Conesa, Juan A.
  • Aracil, Ignacio|||/items/0485586f-35e8-4be9-b931-2b960ed728d9
  • Conesa, Juan A.|||/items/05e6decf-7fcc-481c-a2db-3a3e67e75b5d
  • Gómez-Rico, María Francisca|||/items/858ecde1-f676-4a71-982c-77a0fbb2c21c
An effective management of waste printed circuit board (WCB) recycling presents significant advantages of an economic, social, and environmental nature. This is particularly the case when a suitable valorisation is made of the non-metallic parts of the WCBs, well known for their “hidden” toxicological risks. Such benefits motivate research on techniques that could contribute to mitigating their adverse socio-environmental impacts. In this work, waste printed circuit boards (WCBs) containing tetrabromobisphenol A (TBBPA) as a brominated flame retardant (BFR) underwent debromination using a mechanochemical treatment (MCT) and marble sludge, another recoverable waste, as well as pure CaO as additives. All runs in this work were performed at an intermediate rotation speed of 450 rpm, using additive/WCB mass ratios (Rm) of 4:1 and 8:1, ball to powder ratios (BPR) of 20:1 and 50:1, treatment times from 2.5 h to 10 h, two WCB sizes (powder and 0.84 mm) and marble sludge, from original to precalcined conditioning. Stainless steel jars and balls were used to verify the effect of each parameter on the system and to seek an optimum process. Complete debromination of 0.84 mm WCBs was achieved at 450 rpm, using a Rm of 8:1, a BPR of 50:1, a residence time of 10 h (more than 95% in only 5 h), and a precalcined marble sludge as additive. The results revealed that when using a Rm of 4:1 instead of 8:1, more waste could be effectively treated, per batch with a lesser need for additives, at the expense of a slightly lower level of debromination efficiency. In the same way, an appropriate apparent ball diameter (with respect to the volume of the used jar) should be carefully studied in relation to WCB size in order to achieve a beneficial total amount of energy transfer during milling.