Pasar al contenido principal

ESTUDIOS MECANISTICOS AVANZADOS DE REACCIONES ELECTROQUIMICAS RELACIONADAS CON LA ENERGIA

PID2019-105653GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Why Methanol Electro-oxidation on Platinum in Water Takes Place Only in the Presence of Adsorbed OH

  • Mekazni, Dalila S.
  • Arán-Ais, Rosa
  • Herrero, Enrique
  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
[EN] Untangling the mechanism of the methanol electro-oxidation on platinum in water as a model reaction is essential to optimize fuel cells using alcohols as fuel. Recent experiments unexpectedly suggested that this electro-oxidation process would take place only in the presence of adsorbed OH. The here reported results, carefully obtained under low methanol concentrations on the three basal planes of platinum at different scan rates to discriminate between oxidation and adsorption processes, confirm such an unexpected preliminary observation. It is found that adsorbed CO from methanol is only formed when adsorbed OH is already present on the surface. This observation is a clear indication that adsorbed OH is involved in the mechanism beyond providing the oxygen group required to oxidize adsorbed CO, which has never been considered before. Supported by density functional theory calculations, the role played by adsorbed OH in the methanol electro-oxidation to CO on platinum in water and the reason why this reaction is not observed in the absence of adsorbed OH are also here both elucidated. A combination of kinetic and thermodynamic factors, such as the presence of multiple water molecules per methanol molecule, the high adsorbed OH mobility on the surface, the favorable coadsorption of methanol in the presence of adsorbed OH, and the favorable and virtually barrier-less hydrogen transference from the hydroxy group of methanol to adsorbed OH to yield water result in the immediate activation of methanol (as soon as the molecule approaches the surface) through the favorable substitution of adsorbed OH by adsorbed methoxy. This contribution represents a change of paradigm in the understanding of how alcohols are electro-oxidized in reference systems and have crucial implications in the search for better electrocatalysts., This research was funded by Ministerio de Ciencia e Innovacion (Spain) Grant No. PID2019-105653GB-I00) and Generalitat Valenciana (Spain) Grant No. PROMETEO/2020/063. R.M.A.-A. acknowledges financial support from Generalitat Valenciana (Grant No. CDEIGENT/2019/018).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Glutamate adsorption on gold electrodes at different pH values

  • Gisbert-González, José M.
  • Herrero, Enrique
  • Ferre Vilaplana, Adolfo|||0000-0002-9032-9015
[EN] Advanced medical applications of gold nanoparticles can use amino acids as surface modifiers. For this reason, understanding the adsorption of amino acids on gold is crucial to improve these applications. Here, the adsorption of glutamate (Glu) on Au(1 0 0) and Au(1 1 0) electrodes has been studied using a combination of electrochemical experiments, and DFT calculations. The adsorption properties have been examined in two different regions, the double layer region, and the OH adsorption/oxide formation region. In the first one, the combined results from the electrochemical experiments and the DFT calculations indicate that Glu is adsorbed in acidic solutions by the two terminal carboxylate groups, each one in a bidentate configuration, and exchanges two electrons upon adsorption. The comparison with the results obtained for the Au(1 1 1) electrode and other molecules containing carboxylic groups confirms this adsorption mode. Glu adsorption also affects the reconstruction process of the Au(1 1 0) and Au(1 0 0) surfaces. On the other hand, in alkaline solutions, glutamate is not adsorbed because the negative charge of the surface prevents its adsorption. In the OH adsorption/oxide formation region, Glu is oxidized when OH is adsorbed, and the results indicate that OH is consumed in this oxidation process. The formation of gold surface oxides inhibits the Glu oxidation reaction., Financial support from Ministerio de Ciencia e Innovacion (Project PID2019-105653GB-100) and Generalitat Valenciana (Project PROMETEO/2020/063) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Glutamate adsorption on the Au(111) surface at different pH values

  • Gisbert-González, José M.
  • Cheuquepán, William
  • Ferre Vilaplana, Adolfo
  • Herrero, Enrique
  • Feliu, Juan M.
[EN] Adsorbed amino acids can modulate the behavior of metal nanoparticles in advanced applications. Using a combination of electrochemical experiments, FTIR spectroscopy, and DFT calculations, glutamate species interacting with the Au(111) surface in solution are here investigated. Electrochemical results indicate that the adsorption behavior depends on the solution pH (which controls the glutamate ionization) and on the charge of the surface. Glutamate adsorption starts at potentials slightly negative to the potential of zero charge. The thermodynamic analysis of these results indicates that two electrons are exchanged per molecule, implying that both carboxylic groups become deprotonated upon adsorption. The FTIR spectra reveal that carboxylate groups are bonded to the surface in the bidentate configuration (with both oxygen atoms attached to the surface). Plausible adsorbed configurations, consistent with the whole of these insights, were found using DFT. -Additionally, it was observed that glutamate oxidation only takes place when the surface is oxidized, which suggests that this oxidation process involves the transfer of an oxygen group to the molecule, though, according to the FTIR spectra, the main chain remains intact., Financial support from Ministerio de Ciencia e Innovacion (Project PID2019-105653GB-100) and Generalitat Valenciana (Project PROMETEO/2020/063) is acknowledged.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Surface structure-sensitivity dependence and mechanistic study of the glucose electro-oxidation on Pt stepped surfaces in neutral solution (pH 7)

  • Mello, Gisele A.B.
  • Briega-Martos, Valentín
  • Feliu, Juan M.
The electro-oxidation of glucose (0.01 M) in a neutral solution phosphate buffer solution – pH ~7 (0.1 M) is strongly sensitive to the surface structure. On surfaces containing (100) terraces domains the reaction occurs mainly into these sites due to their higher activity. Higher (111) step density into (100) terrace domains conducts the reaction through a less poisoned and energetic pathway because steps inhibit the cyclic carbonate formation. On surfaces containing (111) terrace sites, on large atom-wide terrace (𝑛 ≥ 9) the reactivity of the (100) steps seems to be mainly associated to the anticipation of the formation of glucuronic acid and favor its oxidation to glucaric acid and/or xylonic acid + CO, that are more energetic reactions. On the other hand, when the step density is increased, the catalytic activity decreases as result of adsorption of intermediates and/products generated during the reaction on (100) steps. Lower and medium (110) density steps favor the adsorption of glucose on surfaces containing (111) terraces symmetry, but independently of the terrace step symmetry, as the (110) step density is increased the electrocatalytic activity is reduced because the reaction takes place through a more poisoned pathway, with the formation of a greater amount of species that adsorb strongly on the (110) sites and block the surface.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Small (<5 nm), Clean, and Well‐Structured Cubic Platinum Nanoparticles: Synthesis and Electrochemical Characterization

  • Antoniassi, Rodolfo M.
  • Erikson, Heiki
  • Solla-Gullón, José
  • Torresi, Roberto M.
  • Feliu, Juan M.
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Shape‐controlled metal nanoparticles are significantly improving the electrocatalysis of many relevant reactions. By controlling the shape of nanoparticles, it is possible to engineer their surface to exhibit a preferential structure. However, to facilitate the incorporation of shaped nanomaterials into practical electrochemical devices, it is indispensable to overcome limitations caused by their large particle size (typically >5 nm). For practical applications, nanoparticles must have a size lower than 5 nm with a clean surface to decrease costs and provide a sufficiently large specific surface area. This is a major challenge that has remained unexplored up to now. Herein, we present the synthesis and electrochemical characterization of 3–5 nm, with well‐defined cubic Pt nanoparticles supported on carbon. The electrochemical characterization of the nanoparticles evidences the existence of a preferential {100} and clean structure (within about 40 % of {100} terrace surface).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Adsorption of croconic acid anions at silver electrodes in sodium fluoride solutions. Interplay of DFT calculations and in situ ATR-SEIRAS measurements for the interpretation of experimental spectra of adsorbed species

  • Cheuquepán, William
  • Rodes, Antonio
  • Orts, José M.
  • Orts, José M.|||/items/ccc73a25-76fa-4f15-bfd7-33f3ab2771bd
  • Rodes, Antonio|||/items/0498f81b-f1a5-4f48-bee3-357d1a2c65e6
The adsorption of species coming from the disodium salt of croconic acid (4,5-dihydroxy-4-cyclopentene-1,2,3-trione, H2C5O5) at chemically deposited silver electrodes was studied in aqueous sodium fluoride solutions by combining in situ ATR-SEIRAS (Surface-Enhanced Infrared Reflection Absorption Spectroscopy experiments under Attenuated Total Reflection conditions) and Density Functional Theory (DFT) calculations. Voltammetric experiments suggest the existence of reversible adsorption processes in the potential range between −0.55 and −0.20 V vs Ag/AgCl (KCl 1 M), whereas irreversible reduction is observed for potentials below-0.55 V. ATR-SEIRA spectra show potential-dependent adsorbate bands in the potential range for reversible adsorption, that were assigned according to DFT calculations. Calculated optimized geometry of adsorbed croconate and bicroconate correspond to bonding to the silver surface in a bidentate configuration through two oxygen atoms with the molecular plane perpendicular to the metal surface. The broadening and splitting at high electrode potentials of the Csingle bondO stretching bands for adsorbates coming from croconic acid can be explained by invoking the existence of collective vibrational modes appearing at high coverage. In overall, the ATR-SEIRA spectra obtained with Ag thin layer electrodes resembles that reported for Au thin layers. As a difference, higher adsorbate coverage seems to be obtained in the case of silver. Moreover, a strong feature at ca. 1580 cm−1 is experimentally observed, that was much weaker on gold samples. The calculated frequencies for adsorbed croconate and bicroconate do not change significantly with the adsorption bonding sites for the optimized geometries. Taking into account the calculated frequencies of both types of species, a better agreement with the experimental behavior (including the splitting/shifting caused by dipole–dipole coupling in high-coverage collective modes) is obtained in the case of bicroconate. The coexistence with some adsorbed croconate species cannot be ruled out.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the oxidation mechanism of C1-C2 organic molecules on platinum. A comparative analysis

  • Rizo, Rubén
  • Arán-Ais, Rosa M.
  • Herrero, Enrique
  • Arán-Ais, Rosa M.|||/items/9120125e-5943-4754-ba84-7200ee3b8c85
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Rizo, Rubén|||/items/27448570-0e85-47c3-be0f-38bcb1bf11b3
The rational design of better electrocatalysts for the oxidation of C1–C2 organic molecules requires the detailed knowledge of their oxidation mechanism. Pt single crystals are powerful tools to study, in a simple way, the surface structure effect on the different reaction pathways. Here, the oxidation mechanism of these molecules is compared so that the knowledge gained with the simpler mechanism is transferred in the analysis of the more complex ones. The goal is to design strategies so that the platinum electrodes improve their performance in their oxidation by the appropriate modification with other elements by attacking the bottlenecks in the reaction mechanism.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Direct measurement of the hydrogen adsorption entropy on shape-controlled Pt nanoparticles using electrochemical microcalorimetry

  • Botello, Luis
  • Schönig, Marco
  • Solla-Gullón, José
  • Climent, Victor
  • Feliu, Juan M.
  • Schuster, Rolf
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Platinum nanoparticles are indispensable in electrochemical applications, e.g., for the generation and usage of green hydrogen. Therefore, understanding the properties of these materials before and during operation is of crucial research interest. However, their investigation is complicated by the variety of adjustable parameters under operating conditions. Researchers thus often revert to studying model systems, like single crystal Pt surfaces, yet it is not always clear how gained insights translate to actual applications. Conducting comprehensive physico-chemical studies on nanoparticles with preferential shapes could help bridge this gap. In this contribution, we use electrochemical microcalorimetry to investigate hydrogen adsorption on different shape-controlled platinum nanoparticles (quasi-spheres, cubes and octahedrons). From this method, we obtain the entropy of the adsorbed hydrogen on the different particles, which we aim to relate to its binding condition with the surface. This quantity often serves as a descriptor for the catalytic performance in the hydrogen evolution reaction. We show that the entropy of adsorption on the particles with different geometries is in good agreement with the adsorption on the single crystal sites related to the respective faces of the particles, by a comparison with entropy values obtained on platinum single crystals using the electrocapillary equation. The consistency between both methods opens possibilities for further research on analogous surfaces. The study is completed by investigating the effect of roughening of the particle surface by continuously cycling the potential into the platinum oxidation region. This enables the investigation of adsorbed hydrogen under more realistic conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Oxygen reduction reaction on Pd nanoparticles supported on novel mesoporous carbon materials

  • Lüsi, Madis
  • Erikson, Heiki
  • Tammeveski, Kaido
  • Treshchalov, Alexey
  • Kikas, Arvo
  • Piirsoo, Helle-Mai
  • Kisand, Vambola
  • Tamm, Aile
  • Aruväli, Jaan
  • Solla-Gullón, José
  • Feliu, Juan M.
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
In this work three mesoporous nitrogen-doped carbon support materials were evaluated for oxygen reduction reaction (ORR) in comparison to Vulcan carbon in 0.1 M KOH and 0.5 M H2SO4 solutions. Palladium nanoparticles were synthesised using citrate method and the average particle size of 3.9 ± 0.6 nm was obtained, which was determined from transmission electron microscopy (TEM) images. Unique porosities of these mesoporous engineered catalyst supports (ECS) were evaluated using the BET method and all of the materials displayed similar microporosity, altrough mesopore distribution varied greatly between these materials. Three different loadings of the Pd catalyst were applied to the support materials (varying between 20-40 wt% of Pd) to evaluate the support ability to disperse a large amount of Pd. By comparing the 40 wt% Pd loaded ECS-003604 and Vulcan XC-72R it can be noted that the Vulcan carbon-supported Pd catalyst is more agglomerated. The agglomeration of this catalyst is also noticeable from cyclic voltammetry (CV) studies, where the PdO reduction peak shifts to more positive values as compared to the mesoporous Pd/C counterparts. The ORR kinetics were explored using the rotating disc electrode (RDE) method. In acidic media a Pd catalyst supported on a bimodal mesoporous ECS material showed highest specific activity for oxygen electroreduction, while in alkaline the activity difference is less noticeable between the Pd-based electrocatalyst materials. One of the mesoporous N-doped carbon supported Pd catalyst was also compared to Pd/Vulcan cathode in single-cell alkaline anion exchange membrane fuel cell and improved peak power density was observed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical acquisition of kinetic and thermodynamic information from hydrogen adsorption on Pt single crystal surfaces

  • Botello, Luis
En la presente tesis doctoral se examina la adsorción de hidrógeno en superficies monocristalinas de platino, enfocándose en los aspectos cinéticos y termodinámicos de la misma, especialmente en cuanto a la entropía. Se han utilizado las técnicas de voltametría cíclica, impedancia de espectroscopía electroquímica, pulsos de corriente y de potencial, los dos últimos en conjunto con micro-calorimetría, para obtener información del sistema al perturbar la temperatura del mismo en distintas magnitudes. Se ha conseguido medir la energía de activación para la reacción de adsorción de hidrógeno, un valor experimental que puede servir de soporte a los cálculos teóricos en donde se busca obtener pero incluir todas las propiedades del sistema incremente la complejidad de la operación. También se ha medido con rigurosidad el comportamiento de la adsorción de hidrógeno en medio alcalino al cambiar la temperatura, demostrando que termodinámicamente este proceso no depende del cambio de temperatura. Deben considerarse las contribuciones de la doble capa y la química de la interfase para obtener predicciones en sistemas no ideales. Por último, haciendo uso de la micro-calorimetría se ha encontrado la relación entre la estructura superficial de un electrodo y la entropía de adsorción de hidrógeno, incluyendo los cambios termodinámicos que ocurren cuando la superficie se desordena. Este resultado es clave para la comprensión de la termodinámica de procesos de electrocatálisis en situaciones reales.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the nature of adsorbed species on platinum single-crystal electrodes

  • Rizo, Rubén
  • Herrero, Enrique
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Rizo, Rubén|||/items/27448570-0e85-47c3-be0f-38bcb1bf11b3
The dependence of voltammetric currents on multiple parameters (concentration, pH, temperature, etc) has become a primary source of information in interfacial studies of noble metal electrodes. Peak potential, charge, and width are intimately related to surface structure and reactivity. However, this interpretation usually neglects the complexity of the redox processes involved. For the so-called hydrogen adsorption region in platinum, anion competitive adsorption plays an important role that is usually overlooked. While charge displacement already demonstrated decades ago the existence of anion adsorption contributions, only recently a combination of several surface-sensitive techniques has proven unambiguously the presence of OH adsorbed on step sites at potentials much lower than usually considered. This information must not be neglected when analyzing the properties of complex catalysts, such as those composed of nanoparticles, since it is of great importance for understanding its overall reactivity, comparing with computational results, and performing coulometric analysis.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Investigating the presence of adsorbed species on Pt steps at low potentials

  • Rizo, Rubén
  • Fernández-Vidal, Julia
  • Hardwick, Laurence J.
  • Attard, Gary A.
  • Vidal-Iglesias, Francisco J.
  • Climent, Victor
  • Herrero, Enrique
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Rizo, Rubén|||/items/27448570-0e85-47c3-be0f-38bcb1bf11b3
The study of the OH adsorption process on Pt single crystals is of paramount importance since this adsorbed species is considered the main intermediate in many electrochemical reactions of interest, in particular, those oxidation reactions that require a source of oxygen. So far, it is frequently assumed that the OH adsorption on Pt only takes place at potentials higher than 0.55 V (versus the reversible hydrogen electrode), regardless of the Pt surface structure. However, by CO displacement experiments, alternating current voltammetry, and Raman spectroscopy, we demonstrate here that OH is adsorbed at more negative potentials on the low coordinated Pt atoms, the Pt steps. This finding opens a new door in the mechanistic study of many relevant electrochemical reactions, leading to a better understanding that, ultimately, can be essential to reach the final goal of obtaining improved catalysts for electrochemical applications of technological interest.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the behavior of CTAB/CTAOH adlayers on gold single crystal surfaces

  • Gisbert-González, José M.
  • Oliver-Pardo, María V.
  • Sarabia, Francisco J.
  • Climent, Victor
  • Feliu, Juan M.
  • Herrero, Enrique
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
The behavior of adsorbed CTAB and CTAOH on gold single crystal electrodes has been studied in solutions with different pH values. For the different single crystal electrodes, the adsorbed adlayer formed by CTA+ cations is in contact with the surface, when the electrode charge is negative. As the surface charge becomes positive, the adlayer detaches from the surface and water molecules permeate through it, giving rise to characteristic peaks in the voltammogram. Charge and laser induced jump temperature measurements show that the composition of the adlayer contains not only the CTA+ cations but also anions, which are required to stabilize the adlayer. In alkaline solutions, the higher solubility of CTAB/CTAOH in alkaline solutions leads to the partial desorption of the adlayer when these species are not present in the solution. When CTAB or CTAOH are dissolved in the alkaline cell solution, the adlayer is strongly bonded to the surface in the whole potential window due to the negative charge of the surface.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The Surface Processes on Ru/Pt(111) as Probed by Cyclic Voltammetry and in Situ Surface-Enhanced Raman Spectroscopy

  • Yu, Anni
  • Rizo, Rubén
  • Vidal-Iglesias, Francisco J.
  • Arán-Ais, Rosa M.
  • Chen, Yan-Xia
  • Herrero, Enrique
  • Feliu, Juan M.
  • Arán-Ais, Rosa M.|||/items/9120125e-5943-4754-ba84-7200ee3b8c85
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Rizo, Rubén|||/items/27448570-0e85-47c3-be0f-38bcb1bf11b3
Information about the chemical adsorption and surface oxidation of Ru under electrochemical conditions is of great importance for understanding the structure–activity relationship in Ru-based materials. Quasi-single-crystalline Ru films on single-crystal Pt(111) electrodes (Ru/Pt(111)) were prepared by the forced-deposition method along with inductive heating treatment. The adsorption of both hydrogen and oxygen species on Ru/Pt(111) was studied by cyclic voltammetry and CO displacement. The potential of zero total charge on Ru/Pt(111) is ca. 0.12 V. A detailed study on oxygen species was carried out by in situ surface-enhanced Raman spectrometry. Ru–O was found to form at E > 0.1 V, and the conversion of Ru–O into RuO2 occurred at E = 0.3 V. The reversible oxidation occurs up to 1.0 V. Our results suggest that Ru/Pt(111), which exhibits electrochemical properties similar to those of Ru(0001), may serve as an alternative for Ru study as well as a model system for understanding ligand and strain effects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Glutamate adsorption on gold electrodes at different pH values

  • Gisbert-González, José M.
  • Ferre-Vilaplana, Adolfo
  • Herrero, Enrique
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
Advanced medical applications of gold nanoparticles can use amino acids as surface modifiers. For this reason, understanding the adsorption of amino acids on gold is crucial to improve these applications. Here, the adsorption of glutamate (Glu) on Au(1 0 0) and Au(1 1 0) electrodes has been studied using a combination of electrochemical experiments, and DFT calculations. The adsorption properties have been examined in two different regions, the double layer region, and the OH adsorption/oxide formation region. In the first one, the combined results from the electrochemical experiments and the DFT calculations indicate that Glu is adsorbed in acidic solutions by the two terminal carboxylate groups, each one in a bidentate configuration, and exchanges two electrons upon adsorption. The comparison with the results obtained for the Au(1 1 1) electrode and other molecules containing carboxylic groups confirms this adsorption mode. Glu adsorption also affects the reconstruction process of the Au(1 1 0) and Au(1 0 0) surfaces. On the other hand, in alkaline solutions, glutamate is not adsorbed because the negative charge of the surface prevents its adsorption. In the OH adsorption/oxide formation region, Glu is oxidized when OH is adsorbed, and the results indicate that OH is consumed in this oxidation process. The formation of gold surface oxides inhibits the Glu oxidation reaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Interfacial Water Structure as a Descriptor for Its Electro-Reduction on Ni(OH)2-Modified Cu(111)

  • Auer, Andrea
  • Sarabia, Francisco J.
  • Winkler, Daniel
  • Griesser, Christoph
  • Climent, Victor
  • Feliu, Juan M.
  • Kunze-Liebhäuser, Julia
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
The hydrogen evolution reaction (HER) has been crucial for the development of fundamental knowledge on electrocatalysis and electrochemistry, in general. In alkaline media, many key questions concerning pH-dependent structure–activity relations and the underlying activity descriptors remain unclear. While the presence of Ni(OH)2 deposited on Pt(111) has been shown to highly improve the rate of the HER through the electrode’s bifunctionality, no studies exist on how low coverages of Ni(OH)2 influence the electrocatalytic behavior of Cu surfaces, which is a low-cost alternative to Pt. Here, we demonstrate that Cu(111) modified with 0.1 and 0.2 monolayers (ML) of Ni(OH)2 exhibits an unusual non-linear activity trend with increasing coverage. By combining in situ structural investigations with studies on the interfacial water orientation using electrochemical scanning tunneling microscopy and laser-induced temperature jump experiments, we find a correlation between a particular threshold of surface roughness and the decrease in the ordering of the water network at the interface. The highly disordered water ad-layer close to the onset of the HER, which is only present for 0.2 ML of Ni(OH)2, facilitates the reorganization of the interfacial water molecules to accommodate for charge transfer, thus enhancing the rate of the reaction. These findings strongly suggest a general validity of the interfacial water reorganization as an activity descriptor for the HER in alkaline media.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the thermodynamics of hydrogen adsorption over Pt(111) in 0.05M NaOH

  • Botello, Luis
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
The reasons for the sluggish kinetics of the hydrogen adsorption reaction in alkaline media remain a question still to be solved. This information is important to achieve a complete understanding of the mechanistic details that could lead to the production of key catalytic materials necessary for the development of a future hydrogen economy. For a better understanding of this reaction, it is important to acquire information about the thermodynamic parameters characteristic of the different steps in the reaction. Among these, the hydrogen adsorption is a key step in the process of hydrogen evolution. Although some debate still remains about the difference between adsorbed hydrogen in the underpotential deposition (UPD) region and at the overpotential deposition region, there is no doubt that understanding the former can help in the understanding of the latter. Making use of charge density measurements, we report on this paper a thermodynamic study of the hydrogen UPD process on Pt(111) in 0.05M NaOH over the range of temperatures from 283 ≤ T/K ≤ 313. The coulometric features corresponding to HUPD allow for the calculation of the hydrogen coverage and a fit to a Generalized Frumkin isotherm. From these values, different thermodynamic functions for the UPD reaction have been calculated: ΔGads, ΔSads, ΔHads, and the Pt–H bond energy. From extrapolation, a value of Δ𝑆◦𝑎𝑑𝑠=−7.5(±4)Jmol−1K−1 was found, which is very close to 0, much lower than previously reported measurements both in acid and in alkaline solutions. Such value has an effect on the enthalpy and bond energy calculations, the latter having a decreasing tendency with pH and coverage. This tendency is completely different from the acidic systems and implies that the change in the thermodynamic functions due to the formation of the double layer and the reorganization of interfacial water has a strong influence on the process in high pH solutions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of Pd on the Electrocatalytic Activity of Pt towards Oxidation of Ethanol in Alkaline Solutions

  • Jadali, Salma
  • Kamyabi, Mohammad Ali
  • Solla-Gullón, José
  • Herrero, Enrique
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The understanding of electrocatalytic activity and poisoning resistance properties of Pt and Pd nanoparticles, recognized as the best electrocatalysts for the ethanol oxidation reaction, is an essential step for the commercialization of direct ethanol fuel cells (DEFCs). In this paper, mono and bimetallic Pt and Pd nanoparticles with different atomic ratios have been synthesized to study their electrocatalytic properties for an ethanol oxidation reaction in alkaline solutions. The different nanoparticles were physiochemically characterized by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The electrochemical characterization was performed by cyclic voltammetry and chronoamperometry measurements. The electrochemical measurements indicate that Pt nanoparticles have much higher electrocatalytic activity for ethanol oxidation than Pd nanoparticles. The studies with bimetallic PtPd nanoparticles showed a significant impact of their composition on the ethanol oxidation. Thus, the highest electrocatalytic activity and poisoning resistance properties were obtained for Pt3Pd2 nanoparticles. Moreover, this study demonstrates that the poisoning of the catalyst surface through ethanol oxidation is related to the prevalence of the acetaldehyde–acetate route and the polymerization of acetaldehyde through aldol condensation in the alkaline media.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effect of the interfacial electric field on the HER on Pt(111) modified with iron adatoms in alkaline media

  • Sarabia, Francisco J.
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
The study of the hydrogen evolution reaction (HER) aimed to reach a deeper understanding of the parameters that control the rate of this reaction is of great importance given the technical relevance of hydrogen production as an energy vector in the so-called hydrogen economy. In previous works, laser-induced temperature jump (LITJ) experiments on Pt(111) modified with Ni(OH)2 in alkaline media have revealed the importance of the interfacial electric field in the rate of the HER. It was hypothesised that small amounts of Ni(OH)2 cause a decrease of the electric field because of a negative shift of the pzfc toward the onset of the hydrogen evolution. In this work, to test the validity of this hypothesis, the study has been extended to Pt(111) surfaces modified with Fe(OH)2. The modified surfaces have been studied voltammetrically, and the voltammetric charges have been analysed. The voltammograms show a peak in the hydrogen evolution region that suggest the transformation in the adlayer from Fe(II) to Fe(0). In agreement with the coulometric analysis, the voltammetric features in the OH adsorption region would be related with the oxidation to the +3 valence state. The results obtained with LITJ method reflect the existence of a strong interaction of the Fe oxophilic species with the water molecules, shifting the potential of maximum entropy away from the onset of the HER. Hence, the most catalytic surface is the one with the lowest Fe coverage.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

New insights into the hydrogen peroxide reduction reaction and its comparison with the oxygen reduction reaction in alkaline media on well-defined platinum surfaces

  • Rizo, Rubén
  • Feliu, Juan M.
  • Herrero, Enrique
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Rizo, Rubén|||/items/27448570-0e85-47c3-be0f-38bcb1bf11b3
The hydrogen peroxide reduction reaction (HPRR) is investigated at pH = 13 on the Pt basal planes and stepped surfaces with (1 1 1) terraces separated by either monatomic (1 0 0) or (1 1 0) steps. A quantitative analysis of the surface structure effect revealed that Pt(1 1 1) is the most active surface and its activity progressively decreases when steps are introduced. Additionally, inhibition of the HPRR is observed at low potentials, which onset potential is governed by the OHads and the point of maximum entropy (pme) of the interphase. Experiments with different rotation rates suggest the formation of an HPRR intermediate linked to the inhibition process, which is more strongly adsorbed on (1 1 0) than (1 0 0) steps. Finally, a comparison of the HPRR and ORR (oxygen reduction reaction) illustrated the important differences for both reactions, which are dependent on the step density. These divergences have been discussed based on adsorbed intermediates and O2 interactions with the Pt surface.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Inverse kinetic isotope effects in the oxygen reduction reaction at platinum single crystals

  • Yang, Yao
  • Agarwal, Rishi G.
  • Hutchison, Phillips
  • Rizo, Rubén
  • Soudackov, Alexander V.
  • Lu, Xinyao
  • Herrero, Enrique
  • Feliu, Juan M.
  • Hammes-Schiffer, Sharon
  • Mayer, James M.
  • Abruña, Héctor D.
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Rizo, Rubén|||/items/27448570-0e85-47c3-be0f-38bcb1bf11b3
Although the oxygen reduction reaction (ORR) involves multiple proton-coupled electron transfer processes, early studies reported the absence of kinetic isotope effects (KIEs) on polycrystalline platinum, probably due to the use of unpurified D2O. Here we developed a methodology to prepare ultra-pure D2O, which is indispensable for reliably investigating extremely surface-sensitive platinum single crystals. We find that Pt(111) exhibits much higher ORR activity in D2O than in H2O, with potential-dependent inverse KIEs of ~0.5, whereas Pt(100) and Pt(110) exhibit potential-independent inverse KIEs of ~0.8. Such inverse KIEs are closely correlated to the lower *OD coverage and weakened *OD binding strength relative to *OH, which, based on theoretical calculations, are attributed to the differences in their zero-point energies. This study suggests that the competing adsorption between *OH/*OD and *O2 probably plays an important role in the ORR rate-determining steps that involve a chemical step preceding an electrochemical step (CE mechanism).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Why Methanol Electro-oxidation on Platinum in Water Takes Place Only in the Presence of Adsorbed OH

  • Mekazni, Dalila S.
  • Arán-Ais, Rosa M.
  • Ferre-Vilaplana, Adolfo
  • Herrero, Enrique
  • Arán-Ais, Rosa M.|||/items/9120125e-5943-4754-ba84-7200ee3b8c85
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
Untangling the mechanism of the methanol electro-oxidation on platinum in water as a model reaction is essential to optimize fuel cells using alcohols as fuel. Recent experiments unexpectedly suggested that this electro-oxidation process would take place only in the presence of adsorbed OH. The here reported results, carefully obtained under low methanol concentrations on the three basal planes of platinum at different scan rates to discriminate between oxidation and adsorption processes, confirm such an unexpected preliminary observation. It is found that adsorbed CO from methanol is only formed when adsorbed OH is already present on the surface. This observation is a clear indication that adsorbed OH is involved in the mechanism beyond providing the oxygen group required to oxidize adsorbed CO, which has never been considered before. Supported by density functional theory calculations, the role played by adsorbed OH in the methanol electro-oxidation to CO on platinum in water and the reason why this reaction is not observed in the absence of adsorbed OH are also here both elucidated. A combination of kinetic and thermodynamic factors, such as the presence of multiple water molecules per methanol molecule, the high adsorbed OH mobility on the surface, the favorable coadsorption of methanol in the presence of adsorbed OH, and the favorable and virtually barrier-less hydrogen transference from the hydroxy group of methanol to adsorbed OH to yield water result in the immediate activation of methanol (as soon as the molecule approaches the surface) through the favorable substitution of adsorbed OH by adsorbed methoxy. This contribution represents a change of paradigm in the understanding of how alcohols are electro-oxidized in reference systems and have crucial implications in the search for better electrocatalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Surface charge and interfacial acid-base properties: pKa,2 of carbon dioxide at Pt(110)/perchloric acid solution interfaces

  • Martínez-Hincapié, Ricardo
  • Rodes, Antonio
  • Climent, Victor
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
  • Rodes, Antonio|||/items/0498f81b-f1a5-4f48-bee3-357d1a2c65e6
In this work, we investigate the in-situ spectro-electrochemical behavior of Pt(110) electrodes in contact with acid solutions saturated with CO2. Similar to previous observations reported for Pt(111) electrodes, potential-dependent signals associated to adsorbed bicarbonate and carbonate anions are observed in the FT-IRRA spectra collected for Pt(110), even when the concentration of these anions are near to zero in the bulk solution. The relative intensities of the infrared bands at different pH and applied potential values can be used to determine the interfacial pKa,2 of CO2. The surface pKa,2 value found for Pt(110) electrodes is lower than that for Pt(111) electrodes. This result can be interpreted by assuming that the more open (110) surface leads to a more alkaline interphase than the close packed (111), in the sense that it reacts with acids in a higher extent. We attribute this difference to the lower potential of zero free charge and work function values for Pt(110) electrodes compared to Pt(111) electrodes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Understanding surface charge effects in electrocatalysis. Part 2: Hydrogen peroxide reactions at platinum

  • Huang, Jun
  • Climent, Victor
  • Groß, Axel
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
Electrocatalytic activity is influenced by the surface charge on the solid catalyst. Conventionally, our attention has been focused on how the surface charge shapes the electric potential and concentration of ionic reactant(s) in the local reaction zone. Taking H2O2 redox reactions at Pt(111) as a model system, we reveal a peculiar surface charge effect using ab initio molecular dynamics simulations of electrified Pt(111)-water interfaces. In this scenario, the negative surface charge on Pt(111) repels the O–O bond of the reactant (H2O2) farther away from the electrode surface. This leads to a higher activation barrier for breaking the O–O bond. Incorporating this microscopic mechanism into a microkinetic-double-layer model, we are able to semi-quantitatively interpret the pH-dependent activity of H2O2 redox reactions at Pt(111), especially the anomalously suppressed activity of H2O2 reduction with decreasing electrode potential. The relevance of the present surface charge effect is also examined in wider scenarios with different electrolyte cations, solution pHs, crystal facets of the catalyst, and model parameters. In contrast with previous mechanisms focusing on how surface charge influences the local reaction condition at a fixed reaction plane, the present work gives an example in which the location of the reaction plane is adjusted by the surface charge.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Understanding the electrochemical hydrogenation of acetone on Pt single crystal electrodes

  • Mekazni, Dalila S.
  • Arán-Ais, Rosa M.
  • Feliu, Juan M.
  • Herrero, Enrique
  • Arán-Ais, Rosa M.|||/items/9120125e-5943-4754-ba84-7200ee3b8c85
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
The heterogeneous upgrading of biomass by means of electrocatalytic hydrogenation is an attractive way to refine products for industrial and pharmaceutical purposes. Also, the efficient electrochemical reduction of carbonyl compounds can act as hydrogen vectors, and therefore energy vectors. In this manuscript, we render further fundamental insights into the electrochemical reduction of acetone as a model molecule of carbonyl compounds. The structural sensitivity of the reaction is demonstrated by using platinum single crystal electrodes with low Miller indices and stepped electrodes with (110) terraces and either (111) or (100) monoatomic steps. Among the basal planes, Pt(110) is the only one active for the electroreduction of acetone. The inclusion of (111) steps on the (110) terraces does not significantly alter the behavior of Pt(110), but increasing the (100) step density has been observed to decrease the activity. We attribute this different performance to a geometrical effect of the active sites. By using different supporting electrolytes, we have found that sulfate competes with acetone for the surface sites, thus modifying the adlayer interfacial structure and hampering acetone reactivity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Cu(111) single crystal electrodes: Modifying interfacial properties to tailor electrocatalysis

  • Auer, Andrea
  • Sarabia, Francisco J.
  • Griesser, Christoph
  • Climent, Victor
  • Feliu, Juan M.
  • Kunze-Liebhäuser, Julia
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
Tailoring electrocatalyst materials to the specific requirements of a certain reaction and to optimize activity or enhance selectivity is a key tactic for the development of low-temperature fuel and electrolyzer cells for clean energy production. Here, we demonstrate the modification of Cu(111) electrodes with different sub-monolayer coverages of foreign metals (Cd) and metal hydroxides (Co(OH)2 and Ni(OH)2) for application in the hydrogen evolution reaction (HER) in alkaline media. In situ electrochemical scanning tunneling microscopy (EC-STM) reveals that these modifications have a significant influence on the morphology and structure of the Cu(111) surface with its characteristics depending on both the nature and the amount of the adsorbed metal(hydroxide). Ni(OH)2 and Co(OH)2 on Cu(111) lead to a significant enhancement of the electrocatalytic activity towards the HER in alkaline electrolyte, whereas a decrease in activity is found for Cd modified Cu(111). These trends can be rationalized by considering the strength of the interfacial electric field and its influence on the specific interactions of the electrode with the water ad-layer close to the surface, as determined by laser-induced temperature jump measurements. This comparative study therefore provides valuable information on the structure-activity relation as well as insights on the interfacial characteristics of different bimetallic Cu electrocatalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Insight into the role of adsorbed formate in the oxidation of formic acid from pH-dependent experiments with Pt single-crystal electrodes

  • Salamon, Mateusz J.
  • Briega-Martos, Valentín
  • Cuesta, Angel
  • Herrero, Enrique
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
The concentration dependence of the activity for the oxidation of formic acid at pH 1.2, 2.4, and 3.9 has been studied on Pt(111), Pt(100), and stepped Pt[n(111) x (110)] electrodes. The results clearly demonstrate that, in this pH range, formate, and not formic acid, is the active species. To analyse the data, a kinetic model in which adsorbed monodentate formate is the active intermediate has been proposed. On Pt(111), a steady increase in the reaction rate with increasing pH and a reaction order of 1 for the bulk formate concentration was obtained, in agreement with the proposed model. On the other hand, the competition between adsorbed hydrogen and formate for the adsorption sites on Pt(100) cancels both the concentration and the pH dependence of the reaction rate. On this electrode, the reaction rate for the dehydrogenation of formic acid to COad was also studied and found to go through a maximum both at pH 1.2 and at pH 3.9, although the rate of dehydrogenation is slower and the maximum is broader at pH 3.9. The slower rate at the higher pH is consistent with the well-known fact that dehydrogenation of HCOOH is an acid-catalysed reaction. On Pt[n(111) x (110)] electrodes the behaviour observed is similar to that of Pt(111), with a reaction order of 1 for formate. The only significant difference with respect to the Pt(111) surface is the formation of COad due to the presence of (110) steps.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Oxygen electroreduction on small (<10 nm) and {100}-oriented Pt nanoparticles

  • Erikson, Heiki
  • Antoniassi, Rodolfo M.
  • Solla-Gullón, José
  • Torresi, Roberto M.
  • Tammeveski, Kaido
  • Feliu, Juan M.
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Oxygen reduction reaction (ORR) was studied on {100}-oriented Pt nanoparticles with sizes 3 to 7 nm in sulphuric acid solution. The distribution and size of nanoparticles was analysed by transmission electron microscopy and metal loading was determined by inductively coupled plasma optical emission spectroscopy. The synthesised nanoparticles have about 40% of Pt(100) facet and 10% Pt(111) as determined from Ge and Bi adsorption, respectively. The four Pt/C catalysts with metal loading from 25 to 38 wt% were tested for ORR activity in 0.5 M H2SO4 solution using the rotating disk electrode method. It was found that the ORR proceeds mainly via a 4-electron pathway with the rate-limiting step being the transfer of the first electron to O2 molecule. The mass activities for ORR increase with decreasing the particle size, but specific activity and mass-specific activity have a maximum at 4.6 nm particle size. This means the most optimal {100}-oriented Pt size for ORR is around 4.6 nm in sulphuric acid solution.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Spectroelectrochemical Studies of CTAB Adsorbed on Gold Surfaces in Perchloric Acid

  • Gisbert-González, José M.
  • Briega-Martos, Valentín
  • Vidal-Iglesias, Francisco J.
  • Cuesta, Angel
  • Feliu, Juan M.
  • Herrero, Enrique
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
The behaviour of CTAB adsorbed on polycrystalline gold electrodes has been studied using a combination of spectroelectrochemical methods. The results indicate that the formation of the layer is the consequence of the precipitation of the CTAB micelles on the electrode surface as bromide ions, which stabilize the micelles, are replaced by perchlorate anions. This process leads to the formation of CTA+ layers in which perchlorate ions are intercalated, in which the adlayer suffers a continuous rearrangement that leads to the formation of micro-dominions of different types of hydrogen-bonded water populations throughout the adlayer. After prolonged cycling, a stable situation is reached. Under these conditions, water molecules permeate through the adlayer toward the electrode surface at potentials positive of the potential of zero charge, due to the repulsion between the CTA+ layer and the positive charge of the electrode.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Formic acid oxidation on different coverages of Bismuth-modified Pt(1 0 0): A detailed voltammetric and FTIR study

  • Wei, Zhen
  • Jordà-Faus, Pepe
  • Chico-Mesa, Lorena
  • Cai, Jun
  • Chen, Yan-Xia
  • Rodes, Antonio
  • Feliu, Juan M.
  • Herrero, Enrique
  • Chico-Mesa, Lorena|||/items/5fc68da2-e60b-49d5-870e-f964593ccf26
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Jordà-Faus, Pepe|||/items/cd1fe095-7837-4daf-9c89-d92bc3b5ac53
  • Rodes, Antonio|||/items/0498f81b-f1a5-4f48-bee3-357d1a2c65e6
The formic acid oxidation reaction (FAOR) on bismuth-modified Pt(100) is studied using electrochemical techniques and FITR spectroscopy at different bismuth coverages and formic acid concentrations. The results clearly show that: (1) The measured currents for the Bi-modified Pt(100) surface contain contributions from both the Pt-Bi ensembles and the Pt sites far from the Bi adatoms. (2) The catalytic effect of bismuth is not linked to the adsorption of formate on Pt sites. (3) The bismuth not only improves the activity of the FAOR through the active intermediate but also inhibits the CO poison by a third-body effect. (4) The experimental results indicate that the catalytic activity is linked to the Pt-Bi ensembles. The active species, formate, adsorbs on the Bi site and the neighboring Pt sites facilitate the cleavage of the C-H bond. (5) From the concentration dependence, the reaction order for formate on bismuth-modified Pt(100) is 1 at low potentials. In contrast, a reaction order of 0.5 is obtained at higher potentials. These results are in agreement with the proposed mechanism.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Charge effects on the behavior of CTAB adsorbed on Au(111) electrodes in aqueous solutions

  • Gisbert-González, José M.
  • Oliver-Pardo, María V.
  • Briega-Martos, Valentín
  • Feliu, Juan M.
  • Herrero, Enrique
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
The behavior of adsorbed CTAB on Au(111) electrodes has been studied using electrochemical and FTIR experiments in different aqueous solutions. The results show that the adsorbed layer is stable in acidic solutions in the whole potential range of study. The observed electrochemical and FTIR behavior is compatible with the formation of a membrane of CTA+ on the electrode surface with the polar amino groups in contact with the surface. When the electrode charge is negative, the polar groups are attracted to the surface, so that the capacitance of the electrode is smaller than that recorded for the unmodified Au(111) electrode. As the charge becomes positive, the membrane detaches from the surface and water molecules permeate through it, changing the capacitance of the electrode and giving rise to characteristic peaks in the voltammetric profile. At potentials higher than these peaks, the behavior of the electrode is comparable to that observed for the unmodified electrode. The stability of the membrane is facilitated by the incorporation of anions of the supporting electrolyte. Those anions remain on the membrane even when the electrode is transferred to a different solution, as the electrochemical behavior shows.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Glutamate adsorption on the Au(111) surface at different pH values

  • Gisbert-González, José M.
  • Cheuquepán, William
  • Ferre-Vilaplana, Adolfo
  • Herrero, Enrique
  • Feliu, Juan M.
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
Adsorbed amino acids can modulate the behavior of metal nanoparticles in advanced applications. Using a combination of electrochemical experiments, FTIR spectroscopy, and DFT calculations, glutamate species interacting with the Au(111) surface in solution are here investigated. Electrochemical results indicate that the adsorption behavior depends on the solution pH (which controls the glutamate ionization) and on the charge of the surface. Glutamate adsorption starts at potentials slightly negative to the potential of zero charge. The thermodynamic analysis of these results indicates that two electrons are exchanged per molecule, implying that both carboxylic groups become deprotonated upon adsorption. The FTIR spectra reveal that carboxylate groups are bonded to the surface in the bidentate configuration (with both oxygen atoms attached to the surface). Plausible adsorbed configurations, consistent with the whole of these insights, were found using DFT. -Additionally, it was observed that glutamate oxidation only takes place when the surface is oxidized, which suggests that this oxidation process involves the transfer of an oxygen group to the molecule, though, according to the FTIR spectra, the main chain remains intact.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Surface Defects as Ingredients That Can Improve or Inhibit the Pathways for CO Oxidation at Low Overpotentials Using Pt(111)-Type Catalysts

  • Farias, Manuel J.S.
  • Silva, Adilson L.P.
  • Tanaka, Auro A.
  • Herrero, Enrique
  • Feliu, Juan M.
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
All scientific reports regarding the electro-oxidation reaction of CO on Pt electrodes, without exception, show that this reaction is favored on Pt surfaces rich in defects. In fact, “ordinary” or simple CO preoxidation is a typical process of surface-defected catalysts obeying the conditions of a full COads layer formed at suitably low potentials, such as those of the hydrogen underpotential deposition region. Among the Pt(111)-type surfaces, nondefected Pt(111) has the lowest catalytic activity for CO electro-oxidation. As a novelty, this paper reports that an unusual CO preoxidation appears on a nondefected Pt(111) surface, depending on the COads layer preparation, that is, for a COads layer prepared by cooling the flame-annealed Pt(111) electrode in a CO atmosphere. The magnitude of this unusual CO preoxidation decreases as the Pt surface becomes rich in steps (defects), and using stepped surfaces, this unusual stage of CO electro-oxidation at low overpotentials is revealed to be connected with a long-range order on the (111) plane. Interestingly, both ordinary and unusual CO preoxidations take place on the (111) terrace domains, but only ordinary CO preoxidation is favored on surfaces rich in defects. We propose a mechanism of indirect participation of defects in catalysis, according to which, at low overpotentials, defects on the surface act as ingredients that can improve or inhibit the pathways for the CO electro-oxidation reaction but do not serve as the most active sites themselves. Therefore, at least on extended platinum surfaces, there is no general condition whereby surface defects always favor the CO electro-oxidation reaction. From experiments at temperatures ranging from 283 to 313 K, the activation energies for the unusual CO preoxidation and the main CO oxidation processes were about 108 and 117 kJ mol–1, respectively. Furthermore, it was found that the increase of the CO stripping temperature caused a proportionally greater reduction of charge density of the CO electro-oxidation processes at low overpotentials, that is, the unusual CO preoxidation, in comparison with the charge density of the oxidation of CO at the main peak (at higher overpotentials).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Elucidating the Structure of the Cu-Alkaline Electrochemical Interface with the Laser-Induced Temperature Jump Method

  • Sebastián, Paula
  • Sarabia, Francisco J.
  • Climent, Victor
  • Feliu, Juan M.
  • Escudero-Escribano, María
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
A detailed description of the Cu–electrolyte interface is vital to understand the electrocatalytic properties of Cu surfaces. Herein, we combine cyclic voltammetry and the laser-induced temperature jump technique to describe the structure of the Cu(111) and Cu(100) | electrolyte interfaces in 0.1 M NaOH in a glass-free electrochemical cell. The laser-induced potential transients recorded at different potentials provided information of the surface charge distribution, which allowed us to calculate the potential of maximum entropy (pme), which can be considered as a good estimation of the potential of zero charge (pzc) of Cu(111) and Cu(100). We found that pzcCu(111) > pzcCu(100), following the same order as their respective work function values. Interestingly, the estimated pzc appears to be located at the onset potential of the OH* voltammetric feature for Cu(111) and Cu(100), which suggests that this feature shifts with the pzc of each crystallographic orientation. This is the first study that provides the experimental evidence of charge distribution at the Cu–solution interface under alkaline conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Cation Effects on Interfacial Water Structure and Hydrogen Peroxide Reduction on Pt(111)

  • Briega-Martos, Valentín
  • Sarabia, Francisco J.
  • Climent, Victor
  • Herrero, Enrique
  • Feliu, Juan M.
  • Climent, Victor|||/items/f8d596b7-a0df-492d-8e11-794f68d84268
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
The interface between the Pt(111) surface and several MeF/HClO4 (Me+ = Li+, Na+, or Cs+) aqueous electrolytes is investigated by means of cyclic voltammetry and laser-induced temperature jump experiments. Results point out that the effect of the electrolyte on the interfacial water structure is different depending on the nature of the metal alkali cation, with the values of the potential of maximum entropy (pme) following the order pme (Li+) < pme (Na+) < pme (Cs+). In addition, the hydrogen peroxide reduction reaction is studied under these conditions. This reaction is inhibited at low potentials as a consequence of the build up of negative charges on the electrode surface. The potential where this inhibition takes place (Einhibition) follows the same trend as the pme. These results evidence that the activity of an electrocatalytic reaction can depend to great extent on the structure of the interfacial water adlayer and that the latter can be modulated by the nature of the alkali metal cation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Spectroelectrochemical and DFT approaches to the study of croconic acid adsorption at gold electrodes in acidic solutions

  • Cheuquepán, William
  • Rodes, Antonio
  • Orts, José M.
  • Orts, José M.|||/items/ccc73a25-76fa-4f15-bfd7-33f3ab2771bd
  • Rodes, Antonio|||/items/0498f81b-f1a5-4f48-bee3-357d1a2c65e6
The adsorption of species coming from croconic acid (4,5-dihydroxy-4-cyclopentene-1,2,3-trione, H2C5O5, CA) at gold electrodes was studied spectroelectrochemically in aqueous perchloric acid solutions. Voltammetric experiments suggest the existence of reversible adsorption processes in the potential range between 0.30 and 0.80 V vs RHE. Surface-Enhanced Infrared Reflection Absorption Spectroscopy experiments under Attenuated Total Reflection conditions (ATR-SEIRA) show potential-dependent adsorbate bands in the latter potential range that, according to Density Functional Theory calculations, can be assigned to adsorbed croconate. Calculated optimized geometry corresponds to bonding of croconate species to the gold surfaces involving two oxygen atoms in a bidentate configuration, with the molecular plane perpendicular to the metal surface for low and high crocoanate coverage. For intermediate coverage, lateral repulsions between neighbor croconate adsorbates give rise to the tilting of the molecular plane. The broadening and splitting at high electrode potentials of the Csingle bondO stretching bands for adsorbed croconate can be explained by invoking the existence of collective vibrational modes appearing at high coverage. The cyclic voltammograms recorded in the CA-containing solutions also show the existence of reversible redox processes at potentials below 0.30 V involving adsorbed species, which are detected in the collected ATR-SEIRA spectra.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Formic acid electrooxidation on small, {100} structured, and Pd decorated carbon-supported Pt Nanoparticles

  • Antoniassi, Rodolfo M.
  • Erikson, Heiki
  • Solla-Gullón, José
  • Torresi, Roberto M.
  • Feliu, Juan M.
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The use of shape-controlled nanomaterials represents an elegant way to improve the performance of many electrochemical reactions. However, two main aspects must be still optimised: decreasing particle size and increasing their activity. This study shows that the deposition of Pd on different small (3-5 nm) supported Pt materials (displaying a preferential structure containing ∼40% of Pt{100} terraces) leads to a great enhancement in the electrocatalytic activity towards the formic acid electrooxidation reaction. After Pd decoration, the oxidation takes place at lower overpotentials and oxidation current densities are significantly higher than those observed with all the bare Pt/C samples. For the Pt/C 45% catalyst, the intrinsic activity after Pd deposition was more than three times of that without Pd, while the oxidation overpotential shifted about ∼200 mV to lower overpotentials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Detection of Superoxide Anion Oxygen Reduction Reaction Intermediate on Pt(111) by Infrared Reflection Absorption Spectroscopy in Neutral pH Conditions

  • Briega-Martos, Valentín
  • Cheuquepán, William
  • Feliu, Juan M.
In this work, in situ external infrared reflection absorption spectroscopy (IRRAS) is successfully employed for the detection of intermediate species in the oxygen reduction reaction (ORR) mechanism on a flat and well-defined Pt surface. Superoxide anion species (O2–) are detected on the Pt(111) surface in an O2-saturated solution with a NaF/HClO4 mixture with pH 5.5 by the observation of a O–O vibration band at ca. 1080 cm–1. The observation of O2– without the use of any other additional method of signal enhancement is possible because in these experimental conditions O2– is the main ORR-generated intermediate and its reactivity is limited in this pH. This leads to the accumulation of O2– near the Pt surface, facilitating its identification.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Ethanol Electro-oxidation Reaction Selectivity on Platinum in Aqueous Media

  • Rizo, Rubén
  • Ferre-Vilaplana, Adolfo
  • Herrero, Enrique
  • Feliu, Juan M.
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Rizo, Rubén|||/items/27448570-0e85-47c3-be0f-38bcb1bf11b3
Ethanol fuel cells require selective catalysts for complete oxidation of the fuel, which involves C–C bond cleavage. From experiments on well-defined surfaces and calculations, the mechanism controlling the ethanol electro-oxidation selectivity on platinum in aqueous media as a model system is elucidated. Adsorbed OH favors ethanol adsorption and conversion into adsorbed ethoxy, which favorably evolves to adsorbed COCH3. On Pt(111), adsorbed OH is also readily incorporated into adsorbed COCH3 to yield acetic acid. A higher barrier for this latter step on Pt(100) enables the COCH3 dehydrogenation to adsorbed COCH2, favoring C–C bond cleavage. As adsorbed OH plays an essential role as a reactant in this process, its adsorption properties have a decisive impact on this reaction. Furthermore, the adsorbed OH diffusion rate on the surface, which depends on the adsorbate/media/surface interaction at the interface, modulates the availability of this key reactant. These results highlight that the search for selective electrocatalysts requires holistic consideration of reactants, adsorbates, media, and substrate.