Pasar al contenido principal

USO DE MATERIALES DE ALTAS PRESTACIONES PARA LA MEJORA DE LA RESISTENCIA FRENTE AL FUEGO DE COLUMNAS MIXTAS CON SECCIONES DE ACERO EMBEBIDAS EN HORMIGON

PID2019-105908RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Post-fire residual strength and ductility of structural steels from hollow sections

  • Pons Aliaga, David|||0000-0002-9034-9550
  • Lapuebla-Ferri, Andrés|||0000-0001-9667-236X
  • Romero, Manuel L.|||0000-0001-5247-4767
[EN] Steel structures are severely affected by the extreme temperatures reached during a fire. After this, if the structure has not collapsed, the remaining elements can be reused if they are not excessively distorted or the material is still fit for service. In the last case, residual properties of steel must be adequate and fulfil the requirements of the current standards. On this matter, it is hypothesized that residual behaviour of steel not only depends on the highest temperature reached during the fire episode, but also on the load it was simultaneously bearing. This work is focused on an experimental study on the post-fire behaviour of structural steels. Specimens were cut from structural steel (S355) cold-formed circular hollow sections (CHS) and subjected to a combination of tensile stress and high temperature. Afterwards, the specimens were cooled in air back to room temperature and, finally, load was increased until specimen failure. The obtained results allowed discussing on the residual yield strength, ultimate strength and stiffness of the steel, and a special focus was put on the residual ductility. The results of this work can provide a basis to the appraisal of steel structures after fire, supporting the further decision on its reinstatement or subsequent demolition., The authors would like to express their sincere gratitude for the help provided through the Grant PID2019-105908RB-I00 funded by MCIN/AEI/ 10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Numerical investigation on the thermal behaviour of steel-reinforced CFST columns in fire

  • Medall-Martos, David|||0000-0001-9212-5326
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Albero, V|||0000-0001-7193-9232
  • Ibáñez, Carmen|||0000-0002-9354-5637
  • Romero, Manuel L.|||0000-0001-5247-4767
[EN] In previous research, the authors highlighted the limited fire resistance of slender concrete-filled steel tubular (CFST) columns. A possible solution for enhancing the fire resistance of such columns consists of embedding an open steel profile within the concrete infill of the CFST section, generating the so-called steel-reinforced concrete-filled steel tubular (SR-CFST) section, where the inner steel profile results thermally protected by the surrounding concrete, thus delaying its degradation at elevated temperatures. This strategy may result beneficial in the fire situation as compared to other sectional configurations where the steel parts are directly exposed to the heat source. In this paper, a two-dimensional finite element model will be developed for studying the thermal behaviour of SR-CFST columns and validated by comparing the temperature distribution results with experimental tests available in the literature. The numerical model will be subsequently used to carry out parametric studies, in order to analyse the influence of the different parameters, such as the cross-section shape, outer tube thickness or the inner steel profile sectional dimensions over the thermal response of these composite sections when subjected to fire. Finally, a simplified temperature distribution proposal will be developed, which may help practitioners for a fast evaluation of the cross-sectional temperature field of SR-CFST columns at a given fire resistance period by assigning an equivalent temperature to each component of the composite section (hollow steel tube, concrete encasement and inner steel profile). This simplified temperature proposal may result helpful when evaluating the sectional capacity of SR-CFST columns in fire, by using a single strength and stiffness value for each component of the composite cross-section corresponding to its temperature., The authors would like to express their sincere gratitude for the help provided through the Grant PID2019-105908RB-I00 and for the first author's pre-doctoral contract through the Grant PRE2020-093106 funded by MCIN/AEI/ 10.13039/501100011033 and by "ESF Investing in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simplified proposal for the temperature field of steel-reinforced CFST columns exposed to fire

  • Medall-Martos, David|||0000-0001-9212-5326
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Albero, V|||0000-0001-7193-9232
  • Romero, Manuel L.|||0000-0001-5247-4767
[EN] Concrete-filled steel tubular (CFST) columns are composite sections that may contribute to reduce the envi-ronmental impact in construction through a more efficient use of resources. By embedding a steel profile inside a CFST section, a new typology is generated, the so-called steel-reinforced concrete-filled steel tubular (SR-CFST) columns, which may enhance not only the structural capacity of these composite columns at room temperature but also their fire performance. This paper focuses on studying the thermal behaviour of SR-CFST columns under fire conditions, for which purpose a two-dimensional finite element model was developed by the authors and validated by comparing the temperature distribution results with experimental tests available in the literature. Subsequently, parametric studies were carried out to analyse the influence of the relevant parameters - cross-section shape, outer tube thickness, inner steel profile dimensions, section factor - over the cross-sectional ca-pacity of SR-CFST columns exposed to a standard ISO 834 fire. Using the data obtained from the parametric studies, a simplified temperature distribution proposal was derived. In the presented proposal, the composite section was divided onto four components (hollow steel tube, concrete infill, inner steel profile web and flanges) and simplified equations and tables were developed through statistical data processing in order to find the representative equivalent temperature of each part of the section. By doing so, the reduced cross-sectional ca-pacity of a SR-CFST column at a given fire resistance period can be easily evaluated by using a single strength and stiffness value for each component of the section corresponding to its assigned equivalent temperature. This simplified approach may be helpful for practitioners in the fire design process of SR-CFST columns, for which the current provisions in Eurocode 4 Part 1.2 do not provide guidance in predicting the temperature field., The authors would like to express their sincere gratitude for the help provided through the Grant PID2019-105908RB-I00 and for the first author's pre-doctoral contract through the Grant PRE2020-093106 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermo-mechanical compression tests on steel-reinforced concrete-filled steel tubular stub columns with high performance materials

  • Medall-Martos, David|||0000-0001-9212-5326
  • Ibáñez, Carmen|||0000-0002-9354-5637
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Romero, Manuel L.|||0000-0001-5247-4767
[EN] Cost-effective solutions provided by composite construction are gaining popularity which, in turn, promotes the appearance on the market of new types of composite sections that allow not only to take advantage of the synergy of steel and concrete working together at room temperature, but also to improve their behaviour at high temperatures. When combined with high performance materials, significant load-bearing capacities can be achieved even with reduced cross-sectional dimensions. Steel-reinforced concrete-filled steel tubular (SR-CFST) columns are one of these innovative composite sections, where an open steel profile is embedded into a CFST section. Besides the renowned benefits of these typologies at room temperature, the fire protection offered by the surrounding concrete to the inner steel profile, gives them an enhanced fire performance which delays its loss of mechanical capacity in a fire scenario. The experimental evidence on the fire behaviour of SR-CFST columns is still scarce, particularly when combined with high performance materials. However, it is being much needed for the development of specific design provisions that consider the use of the inner steel profile in CFST columns. In this work, a new experimental program on the thermo-mechanical behaviour of SR-CFST columns is presented to extend the available experimental database. Ten SR-CFST stub columns, with circular and square geometries, combining high strength steel and concrete were tested. It was seen that the circular specimens reached higher failure times than the square columns, with the failure time increasing both when high strength steel was used at the embedded steel profile and high strength concrete was used as infill. Finally, different proposals for the reduction coefficients of high performance materials were assessed in the prediction of the cross-sectional fire resistance of the SR-CFST columns., The authors would like to express their sincere gratitude for the help provided through the Grant PID2019-105908RB-I00 and for the first author's pre-doctoral contract through the Grant PRE2020-093106 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future". The authors are deeply grateful to Dr Enrique Serra for his help in preparing the test specimens, and to Dr Andres Lapuebla-Ferri and Dr David Pons for their help in conducting the material tests. Finally, the authors would like to acknowledge the funding for open access charge from CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Experimental evaluation of the load-bearing capacity of steel-reinforced CFST stub columns under a fire scenario

  • Medall-Martos, David|||0000-0001-9212-5326
  • Ibáñez, Carmen|||0000-0002-9354-5637
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Romero, Manuel L.|||0000-0001-5247-4767
[EN] Composite construction is becoming increasingly used across the world, since it enables to exploit the benefits of steel and concrete working together, leading to costeffective solutions. Recent technological developments have facilitated the introduction of new typologies, which combined with the use of high performance materials allow for significant load-bearing capacities with reduced cross-sectional dimensions. One of these innovative composite sections are the so-called steel-reinforced concrete-filled steel tubular (SR-CFST) columns, where an open steel profile is embedded into a CFST section. Apart from the broadly recognized benefits of these typologies at room temperature, they show an enhanced fire performance due to the inherent fire protection offered by the surrounding concrete to the inner steel profile, which delays its loss of mechanical capacity at elevated temperatures. However, the experimental evidence on the fire behaviour of SR-CFST columns is still scarce, being much needed for the development of specific design provisions that consider the use of the inner steel profile in CFST columns. In this paper, a new testing program on the thermo-mechanical behaviour of SRCFST columns is presented to extend the available experimental database. A cylindrical electric furnace attached to a loading rig equipped with a 5000 kN hydraulic jack is used. In total six SR-CFST stub columns are tested, three circular and three square sections, combining high strength steel and concrete., The authors would like to express their sincere gratitude for the help provided through the Grant PID2019-105908RB-I00 and for the first author's pre-doctoral contract through the Grant PRE2020-093106 funded by MCIN/AEI/ 10.13039/501100011033 and by ¿ESF Investing in your future¿. The authors are deeply grateful to Dr Enrique Serra for his help and assessment to prepare and conduct the experiments and Dr Andrés Lapuebla-Ferri and Dr David Pons for their help in conducting the material tests.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Numerical and experimental research on the fire resistance of composite columns with steel sections embedded in concrete and high strength materials

  • Medall-Martos, David|||0000-0001-9212-5326
[ES] Los pilares tubulares de acero rellenos de hormigón (CFST) son un tipo de elementos estructurales mixtos que han ganado popularidad recientemente debido a su excelente comportamiento estructural y al uso racional de los materiales en su fabricación. Con la introducción de un perfil de acero dentro de una sección CFST, surge un nuevo tipo de sección mixta: los pilares tubulares de acero rellenos de hormigón con perfil de acero interior (SR-CFST), en los cuáles se centra esta tesis. Esta tipología incrementa la capacidad portante a temperatura ambiente de los pilares CFST y mejora su comportamiento a fuego, ya que el perfil interior está protegido térmicamente por el hormigón que lo rodea. Las investigaciones disponibles en la bibliografía sobre pilares SR-CFST aún son escasas, pese a sus significativas capacidades mecánicas tanto a temperatura ambiente como a elevada. En esta tesis se revisa el estado del arte sobre pilares SR-CFST, llegando a la conclusión de que son necesarias más investigaciones para comprender el comportamiento de estas secciones a temperatura elevada. La presente tesis analizará el comportamiento frente al fuego de pilares SR-CFST mediante ensayos experimentales y simulaciones numéricas. Inicialmente, se lleva a cabo una campaña experimental para analizar el comportamiento de los pilares bajo dos escenarios: una primera fase que estudia el comportamiento de los pilares tras su exposición al fuego, y una segunda en la que se analizará el comportamiento termo-mecánico de pilares cortos SR-CFST bajo carga constante e incremento progresivo de la temperatura. Tras ello, se desarrolla un modelo de elementos finitos para extender los resultados obtenidos experimentalmente y estudiar en profundidad el comportamiento de los pilares SR-CFST en fuego. El modelo numérico se valida con los ensayos termo-mecánicos realizados anteriormente, así como comparando sus predicciones con los resultados experimentales extraídos de la bibliografía. Con el modelo desarrollado se realizan una serie de estudios paramétricos para examinar la influencia de los parámetros geométricos más relevantes, así como para analizar el efecto del uso de materiales de alta resistencia en el comportamiento a fuego de los pilares. En base a los resultados obtenidos de los estudios paramétricos, se lleva a cabo una propuesta para determinar de forma sencilla la distribución de temperaturas seccional en un tiempo de exposición al fuego dado. Empleando las temperaturas equivalentes obtenidas y en línea con las directrices del Eurocódigo 4 Parte 1.2, se propone una nueva expresión para evaluar la resistencia plástica seccional de los pilares SR-CFST bajo la acción del fuego. Esta propuesta cubre un campo de aplicación que actualmente no está contemplado en la normativa europea., [CA] Els pilars tubulars d'acer plens de formigó (CFST) són un tipus de membres estructurals mixtes que han guanyat popularitat recentment degut al seu excel·lent comportament estructural y a l'ús moderat de materials en la seua construcció. Amb la introducció d'un perfil d'acer dins d'una secció CFST, s'obté un nou tipus de secció mixta: els pilars tubulars d'acer plens de formigó amb perfil d'acer interior (SR-CFST), al voltant dels quals se centra esta tesi. Esta tipologia incrementa la capacitat a temperatura ambient dels pilars CFST i millora el seu comportament a foc, ja que el perfil interior està protegit tèrmicament pel formigó que l'envolta. Les investigacions disponibles a la bibliografia sobre pilars SR-CFST encara són escasses, malgrat les seues significatives capacitats mecàniques tant a temperatura ambient com a elevada. En esta tesi es revisa l'estat de l'art sobre pilars SR-CFST, concloent que són necessàries més investigacions per tal de comprendre el comportament d'estes seccions a alta temperatura. En la present tesi s'analitzarà el comportament a foc dels pilars SR-CFST per mitjà d'assajos experimentals i simulacions numèriques. Inicialment es desenvolupa una campanya experimental per tal d'analitzar el comportament dels pilars en dos situacions: una primesa fase estudia el comportament dels pilars després de la seua exposició al foc i una segona en què s'analitza el comportament termo-mecànic de pilars curts SR-CFST subjectes a una càrrega constant i a un increment progressiu de la temperatura. Seguidament es desenvolupa un model d'elements finits realista per tal d'estendre els resultats obtinguts experimentalment i estudiar en profunditat el comportament dels pilars SR-CFST en foc. El model numèric es valida amb els assajos termo-mecànics realitzats anteriorment, així com comparant les seues prediccions amb els resultats disponibles a la bibliografia. Amb ajuda del model desenvolupat es realitzen una sèrie d'estudis paramètrics per tal d'examinar la influència dels paràmetres geomètrics més rellevants així com l'efecte de l'ús de materials d'alta resistència en el comportament a foc dels pilars. Basat en els resultats obtinguts dels estudis paramètrics, es desenvolupa una proposta per determinar, de forma senzilla, la distribució de temperatures seccional en un temps d'exposició al foc concret. Amb les temperatures equivalents obtingudes i en línia en les indicacions de l'Eurocódi 4 Part 1.2, es proposa un nou mètode per avaluar la resistència plàstica seccional de pilars SR-CFST baix l'acció del foc. Esta proposta cobreix un camp d'aplicació que actualment no està contemplat en la normativa europea., [EN] Concrete-filled steel tubular (CFST) columns are a type of composite structural members that have gained popularity in recent years owing to their excellent structural performance and rational use of the materials. By embedding a steel profile inside a CFST section, a new and innovative type of composite section is generated: the so-called steel-reinforced concrete-filled steel tubular (SR-CFST) column, which is the focus of this thesis. This typology improves the room temperature capacity of CFST columns, while enhancing their fire performance, as the inner steel profile is thermally protected by the surrounding concrete. Despite their remarkable load-bearing capacity at both room and elevated temperature, investigations on SR-CFST columns under fire are still scarce. The state of the art on the fire behaviour of SR-CFST columns is reviewed in this thesis, proving that further research is needed to completely understand the performance of this type of columns under elevated temperature. The fire performance of SR-CFST columns is analysed in this thesis by means of experimental tests and numerical simulations. First, an experimental investigation is conducted to study the behaviour of these composite columns under two scenarios: the first phase of the experimental campaign is focused on the post-fire performance, while the second phase is conducted to determine the thermo-mechanical performance of SR-CFST stub columns under constant load and increasing temperature. Subsequently, a realistic finite element model is developed to extend the experimental results and analyse in depth the behaviour of SR-CFST columns in fire. The numerical model is validated against the previously performed thermo-mechanical tests, as well as by comparing its predictions with the available experimental results from the literature. A series of parametric studies are conducted to analyse the influence of the relevant geometrical parameters and to study the effect of the use of high-strength materials on the fire performance of the columns. Based on the results of the parametric studies, a simplified proposal is developed to easily determine the cross-sectional temperature distribution at a given fire exposure time. Using the obtained equivalent temperatures and in line with the current provisions in Eurocode 4 Part 1.2, a new design equation is proposed to evaluate the cross-sectional plastic resistance of SR-CFST columns under fire conditions, filling an existing gap in the European design code., The authors would like to express their sincere gratitude for the help provided through the Grant PID2019-105908RB-I00 and for the first author’s pre-doctoral contract through the Grant PRE2020-093106 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ESF Investing in your future’’. Finally, the authors would like to acknowledge the funding for open access charge from CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental residual capacity of steel-reinforced concrete-filled steel tubular stub columns after fire exposure

  • Medall-Martos, David|||0000-0001-9212-5326
  • Ibáñez, Carmen|||0000-0002-9354-5637
  • Albero, V|||0000-0001-7193-9232
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Romero, Manuel L.|||0000-0001-5247-4767
[EN] Technological advances in the development of steel-concrete composite structures have led to the introduction of novel types of sections in the sought of higher load-bearing capacities. Particularly for composite columns, the axial capacity of concrete-filled steel tubular (CFST) sections may be enhanced by the introduction of an open steel profile embedded within the concrete infill, forming the so-called steel-reinforced concrete-filled steel tubular (SR-CFST) columns. An important aspect that should be revised, in order to safely use these sections in design, is their performance after a fire. In this experimental program, six SR-CFST stub columns are tested in the post-fire situation. Two series of columns comprising three circular and three square sections with the same steel usage are tested for comparison purposes. The size of the inner steel profile is varied in order to investigate its effect over the post-fire capacity of the columns. The specimens were initially exposed to elevated temperatures inside an electric furnace, and then cooled to ambient temperature; afterwards compressive axial load was applied gradually until failure, to ascertain their residual capacity. The experimental results show the high ductility of the SR-CFST stub columns after heating, with the circular specimens reaching higher post-fire peak loads than their square counterparts. This load increases with the size of the embedded steel profile. The post-fire capacities of the columns are evaluated through the Residual Strength Index, showing similar values for both circular and square SR-CFST columns. Finally, a design equation is proposed to facilitate the evaluation of the post-fire compression resistance of SR-CFST columns, as an extension of the existing room temperature design equation in Eurocode 4 Part 1-2 for CFST columns, accounting for the degradation of the steel and concrete after fire exposure through the corresponding residual factors., The authors would like to express their sincere gratitude for the help provided through the Grant PID2019-105908RB-I00 and for the first author's pre-doctoral contract through the Grant PRE2020-093106 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future". The authors are deeply grateful to Dr Enrique Serra for his help and assessment to prepare and conduct the experiments and Dr Andres Lapuebla-Ferri and Dr David Pons for their help in conducting the material tests. Finally, the authors would like to acknowledge the funding for open access charge from CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fire design of steel-reinforced CFST stub columns with high-strength materials

  • Medall-Martos, David|||0000-0001-9212-5326
  • Romero, Manuel L.|||0000-0001-5247-4767
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Thai, Huu-Tai
[EN] Innovative composite sections are gaining popularity as they reduce the environmental impact of construction and take advantage of the collaboration of concrete and steel properties at room temperature and in fire. By introducing high-performance materials, these synergies are boosted. One typology is the steel -reinforced concrete -filled steel tubular (SR-CFST) section, in which a steel profile is embedded inside a CFST section. Despite their impressive load -bearing capacity and fire resistance, the available investigations on their thermomechanical capabilities are scarce. The present paper develops a numerical model to analyse the thermomechanical behaviour of SR-CFST stub columns subjected to fire. The model is validated against previous experiments conducted by the authors by comparing the temperature distribution and the mechanical behaviour with the experimental measurements. Afterwards, an extensive parametric study (1440 cases) is conducted to analyse the influence of several geometrical parameters - cross-sectional shape, outer tube dimensions and thickness, inner steel profile dimensions, section factor - and the use of high -strength materials for the concrete and the inner steel profile. Afterwards, a simplified temperature distribution proposal formerly designed by the authors for SR-CFST sections was tentatively tested. Based on this previous simplified temperature field and in line with the current provisions of EN1994-1-2, a new proposal is developed to evaluate the cross-sectional plastic resistance of SR-CFST stub columns under a fire scenario. This method unifies the initially developed thermal method and provides practical guidance for designers to evaluate the thermo-mechanical behaviour of SR-CFST columns, filling an existing gap in the European design code., The authors would like to express their sincere gratitude for the help provided through the Grant PID2019-105908RB-I00 and for the first author's pre-doctoral contract through the Grant PRE2020-093106 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future". The authors would also like to acknowledge the University of Melbourne for offering a research stay to the first author, during which most of the presented work was conducted.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modelo numérico bidimensional para la evaluación del comportamiento térmico de columnas tubulares de acero rellenas de hormigón con perfiles embebidos en situación de incendio

  • Medall-Martos, David|||0000-0001-9212-5326
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Albero, V|||0000-0001-7193-9232
  • Ibáñez, Carmen|||0000-0002-9354-5637
  • Romero, Manuel L.|||0000-0001-5247-4767
[ES] Cada vez es más común el uso de columnas mixtas de acero-hormigón en edificación, debido a las importantes reducciones de sección que permiten. En los últimos años, se han realizado numerosas investigaciones en la tipología CFST (¿Concrete Filled Steel Tubular column¿). Pese a ello, esta tipología se ve comprometida debido a su limitada resistencia al incendio en casos de elevada esbeltez. Con el fin de mejorar dicho comportamiento surge la tipología de columnas SR-CFST (¿Steel Reinforced Concrete Filled Steel Tubular column¿), que consiste en embeber dentro de la sección un perfil de acero estructural. En este artículo se presenta el desarrollo de un modelo de elementos finitos bidimensional que se ha utilizado para analizar el comportamiento térmico de las columnas SR-CFST en situación de incendio. Dicho modelo ha sido validado por comparación con los resultados experimentales que se encuentran disponibles en la bibliografía como los de Zhu et al. y los de Dotreppe et al., entre otros. Se hace uso del modelo numérico para llevar a cabo estudios paramétricos con el fin de discernir qué influencia tienen diferentes parámetros sobre la resistencia a compresión de la sección a temperatura elevada. Algunos de estos parámetros son la forma de la sección (cuadrada o circular), las dimensiones del perfil interior, el espesor de la pared del tubo de acero o la humedad del hormigón. Teniendo en cuenta los resultados que se obtienen del estudio paramétrico, queda como trabajo futuro el desarrollo de una propuesta de distribución de temperaturas simplificada para cada una de las partes que conforman la sección, de cara a facilitar el cálculo de este tipo de secciones mixtas a temperatura elevada., Los autores agradecen el apoyo proporcionado a través de la Ayuda PID2019-105908RB-I00 y por el contrato predoctoral del primer autor a través de la Ayuda PRE2020-093106 financiadas por MCIN/AEI/ 10.13039/501100011033 y por FSE Invierte en tu futuro.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental and numerical study of high-strength materials on slender steel-reinforced CFST columns in fire

  • Medall-Martos, David|||0000-0001-9212-5326
  • Ibáñez, Carmen|||0000-0002-9354-5637
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Romero, Manuel L.|||0000-0001-5247-4767
[EN] Innovative composite sections are gaining popularity due to their cost-effectiveness and reduced environmental impact. Among them, steel-reinforced concrete-filled steel tubular (SR-CFST) columns, in which an open steel profile is embedded within a conventional CFST section, have been proposed to enhance the behaviour of traditional composite columns. These sections exhibit improved structural capacity and fire performance compared with regular CFST columns. However, experimental data on the fire behaviour of SR-CFST columns, particularly when high-strength materials are used, remain limited. This paper presents an experimental thermo-mechanical testing programme on the fire behaviour of slender SR-CFST columns with high-strength materials, aimed at extending the existing database. Four SR-CFST columns, with circular and square cross-sections, were tested, combining high-strength steel (700 MPa yield strength) and high-strength concrete (90 MPa compressive strength. The experimental results were then used to develop and validate a numerical model for slender SR-CFST columns in fire. Using this model, an extensive parametric analysis was carried out to investigate the influence of high-strength materials on the fire performance of slender SR-CFST columns. The results show that employing high-strength materials significantly improves the fire behaviour of slender SR-CFST columns compared with counterparts made with normal-strength materials., The authors would like to express their sincere gratitude for the help provided through the Grant PID2019-105908RB-I00 and for the first author s pre-doctoral contract through the Grant PRE2020-093106 funded by MCIN/AEI/ 10.13039/501100011033 and by "ESF Investing in your future". The authors are also very grateful to the Association for the Promotion of Research and Technology of Fire Safety (AFITI) for the facilities used to conduct the tests. Finally, the authors would like to acknowledge the funding for open access charge from CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Influence of load and high temperature on the post-fire behaviour of high-strength structural steels

  • Lapuebla-Ferri, Andrés|||0000-0001-9667-236X
  • Pons Aliaga, David|||0000-0002-9034-9550
  • Romero, Manuel L.|||0000-0001-5247-4767
  • Gardner, Leroy
[EN] In this work, an experimental campaign was carried out to evaluate the post-fire mechanical performance of high-strength steel specimens (grade S700) when being subjected simultaneously to different combinations of tensile load and elevated temperature. To this end, transient-state tests were firstly carried out to obtain the `critical temperature¿, i.e., the temperature at which a specimen failed while being simultaneously subjected to tensile load and heated at a constant temperature rate. Secondly, post-fire tests were performed on unloaded as well as loaded specimens. For that purpose, specimens were heated to temperatures below the critical temperature, cooled down in air and finally submitted to tensile testing. In order to investigate the influence of production route, specimens were extracted from coldformed circular hollow sections and hot-rolled sheets. Moreover, coupons with five different thicknesses were tested to investigate the influence of section thickness on the post-fire behaviour. Residual values of yield strength, ultimate strength, elastic modulus and ductility were determined from the tests and discussed., The authors would like to express their sincere gratitude for the help provided through the Grant PID2019-105908RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Load and temperature influence on the post-fire mechanical properties of steel reinforcements

  • Lapuebla-Ferri, Andrés|||0000-0001-9667-236X
  • Pons Aliaga, David|||0000-0002-9034-9550
  • Romero, Manuel L.|||0000-0001-5247-4767
[EN] An experimental study was carried out to evaluate the residual mechanical properties of steel reinforcements after their exposure to elevated temperatures. In order to reproduce real loading conditions, specimens were simultaneously subjected to a load level and a thermal cycle consisting of heating up to a target temperature and cooling back to room temperature. The target temperature was a percentage of the critical temperature, i.e., the temperature at which a specimen breaks when it is subjected to a constant tensile load and an increasing temperature at a constant rate. After that, the residual mechanical properties were obtained submitting the specimens to tensile testing until failure. Critical temperatures for each load level were obtained by means of transient-state tests. In parallel, unloaded specimens were subjected to the same thermal cycle for comparison purposes, and for the same reason steady-state tests were also performed. Results indicated that the residual mechanical behaviour of reinforcing bars depended not only on the maximum temperature reached, but also on the load level that was bearing during the thermal cycle. Depending on this combination of variables, the code requirements for a given ductility class of a reinforcement may not be satisfied in a post-fire situation. Considering the lack of information in this issue, the obtained data can be helpful in the assessment of reinforced concrete structures after a fire., The authors would like to express their sincere gratitude to the Spanish Agencia Estatal de Investigacion (AEI) for the help provided through the Project PID2019-105908RB-I00 and also to the European Union through the FEDER funds.