Pasar al contenido principal

DISEÑO MATERIALES CON CAPACIDADES IGNIFUGAS Y ACUSTICAS CON REDUCIDA HUELLA DE CARBONO. PRESTACIONES DE SEGURIDAD PREVENTIVA POR SENSORIZACION DE MASAS

PID2019-107238RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE EXTREMADURA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Durability of Ternary Cements Based on New Supplementary Cementitious Materials from Industrial Waste

  • Sáez del Bosque, Isabel F.
  • Sánchez de Rojas, María Isabel
  • Medina Martínez, Gabriel
  • Barcala, Sara
  • Medina Martínez, César
[EN] Cement-based materials decay with exposure to aggressive agents, a development that raises infrastructure operation and maintenance costs substantially. This paper analyses the inclusion of ultrafine construction and demolition (UC&DW) and biomass-fuelled power plant (BA) waste as pozzolanic additions to cement in pursuit of more sustainable and eco-respectful binders and assesses the durability of the end materials when exposed to seawater, chlorides (0.5 M NaCl) or sulphates (0.3 M Na2SO4). The effect of adding silica fume (SF) at a replacement ratio of 5% was also analysed. Durability was determined using the methodology proposed by Koch and Steinegger, whilst microstructural changes were monitored with mercury intrusion porosimetry (MIP), X-ray diffraction (XRD) and scanning electron microscopy (SEM) for a fuller understanding of decay processes. According to the findings, the new blended cements containing 20%UC&DW + 10%BA or 20%UC&DW + 20%BA + 5%SF resist the attack by the aggressive media studied, with a 56-d corrosion index of over 0.7. The composition of the reaction products generated with the attack is essentially the same in OPC and the SCM-bearing materials. The results show that the optimal replacement ratio for SCM is 30%., SI, AEI (Agencia Española de la Investigación) 10.13039/501100011033, Consejería de Economía, Ciencia y Agenda Digital (Junta de Extremadura) GR 18122
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Development of Eco-cement from Recycled Low-Carbon Footprint By-product

  • Velardo, Paula
  • Barroso, M.
  • Sáez del Bosque, Isabel F.
  • Sánchez de Rojas, María Isabel
  • Belie, Nele de
  • Medina, César
Paper presented at the International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures (SynerCrete 2023), Milos Island, Greece, 15-16 June 2023, For several decades, the cement industry has been actively seeking alternative raw materials to reduce greenhouse gas emissions and energy consumption. In pursuit of partial replacements for clinker, worldwide research has focused primarily on industrial (fly ash, Si-Mn slag, fired clay-based) and agroforestry (rice husk, sugar cane) waste. The common denominator in all such waste, its pozzolanicity, determines mechanical performance and durability throughout the service life of the cement produced. In this study, two types of industrial waste (construction and demolition waste and biomass waste) were added separately or jointly in different proportions to Portland clinker to ascertain the effect on the rheological, physical and mechanical properties of the resulting binary and ternary eco cements. The use of biomass waste and the joint addition of both kind of wastes were observed to yield cements in which the fresh and hardened properties of the new eco-cement were not significantly lower than in conventional binders and these binders could be apt to use in the manufacture of cement-based material (mortar or concrete) with low-carbon footprint., This study was conducted under grant PID2019-107238RB-C21 funded by MCIN/AEI/10.13039/501100011033, by ‘ERDF A way of making Europe’. Funding was also possible thanks to funding granted by the Consejería de Economía, Ciencia y Agenda Digital de la Junta de Extremadura and by the European Regional Development Fund of the European Union through the reference grants GR 18122 and IB20131. Author Paula Velardo benefitted from predoctoral grant FPU17/06093 funded by MCIN/AEI/10.13039/501100011033 and ‘ESF Investing in your future’., Peer reviewed