Pasar al contenido principal

ANTENAS X-WAVE MULTIMODO Y MULTIHAZ RECONFIGURABLES PARA SISTEMAS DE COMUNICACIONES Y SENSORES

PID2019-107885GB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing resolution of terahertz imaging systems below the diffraction limit

  • Calvo-Gallego, Jaime
  • Notario-Delgado, Juan A.
  • Minin, Oleg V.
  • Abidi, El Hadj
  • Fobelets, Kristel
  • Velázquez-Pérez, Jesús E.
  • Minin, Igor V.
  • Meziani, Yahya M.
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] We report on resolution enhancement of sub-terahertz (THz) images by using the terajet effect. A mesoscale cuboid dielectric particle, used to establish the terajet, was placed in front of an object located at the focus of the THz beam. The object under study was based on a printed circuit board (PCB) perforated with different holes with diameters ranging from 1.8 to 3.0 mm and separated from each other by a distance that varies from 0.25 to 4 mm. The sample was illuminated by a continuous wave source at a frequency of 0.3 THz and the image was obtained using a sensor based on a strained-Si Field-Effect Transistor. The image was formed pixel-by-pixel in a transmission mode configuration. A clearer image with enhanced resolution was obtained when the mesoscale cube was introduced in the optical path. The terajet effect made possible to resolve a separation between holes of around 0.5 mm (lower than the wavelength, 1 mm), that is, below the diffraction limit. The method described is easy to implement, cost effective and could be used to improve the resolution of any real imaging system., This work was partially conducted within the framework of the Tomsk Polytechnic University Development Program. This research was supported by the Spanish Agencia Estatal de Investigacion under Grants Numbers PID2019-107885GB-C32, RTI2018-097180-B-100, and PID2021-126483OB-I00, the Consejeria de Educacion, Junta de Castilla y Leon under Grant Numbers SA121P20 and SA256P18 and the Universidad de Salamanca Research Program under Grant Number PIC2-2021-02 and the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital of the Generalitat Valenciana under the Grant Number MFA/2022/056. This work was also supported by Center for Terahertz Research and Applications (CENTERA) project carried out within the International Research Agendas Program for of Foundation for Polish Sciences co-financed by the European Union under the European Regional Development Fund (grant no. MAB/2018/9). IM, OM initiated this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Dual-Band Planar Antenna with AMC Screen for On-Body Applications

  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
  • Chuquitarco-Jiménez, C. A.
  • Abderrazak, F.
[EN] This paper presents a dual-band planar meander line antenna with an AMC screen for on-body applications. The antenna is aimed to operate at 0.86 and 2.4 GHz. The AMC screen is used to mitigate the effect of the human body into the antenna performance, so it has been designed to work appropriately in the two bands. Simulations of the AMC unit cell and the integration with the meander line antenna will be shown., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio de Ciencia e Innovación) under project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Eight-Port Wideband MIMO Antenna for Sub-6 GHz 5G Base Stations

  • Molins-Benlliure, Jaime
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] An eight-port wide-band multiple-input multiple-output (MIMO) antenna is presented for base stations applications. The antenna is composed by four unit cells (2×2) separated by a cross-shaped isolating block with a total size of 220×220×28 mm ` (2.42¿×2.42¿×0.3¿ , at central frequency f=fc=3.3 GHz). The unit cell is defined by a square cavity-backed antenna fed with two I-shaped crossed dipoles. The antenna provides 8 independent ports with 21.5 dB of minimum isolation and an impedance bandwidth (S11<¿10dB) of 97% ranging at 1.8-5 GHz. Results show an efficiency higher than 87%, unidirectional radiation patterns and low envelope correlation coefficient. The geometry of the antenna is suitable for scaling this design to a massive MIMO system with the replication of the proposed antenna., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio de Ciencia e Innovacion) under project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical Study of the Coupling of Sub-Terahertz Radiation to n-Channel Strained-Silicon MODFETs

  • Calvo-Gallego, Jaime
  • Delgado-Notario, Juan A.
  • Velázquez-Pérez, Jesús E.
  • Fobelets, Kristel
  • El Moussaouy, Abdelaziz
  • Meziani, Yahya M.
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper reports on a study of the response of a T-gate strained-Si MODFETs (modulation-doped field-effect transistor) under continuous-wave sub-THz excitation. The sub-THz response was measured using a two-tones solid-state source at 0.15 and 0.30 THz. The device response in the photovoltaic mode was non-resonant, in agreement with the Dyakonov and Shur model for plasma waves detectors. The maximum of the photoresponse was clearly higher under THz illumination at 0.15 THz than at 0.3 THz. A numerical study was conducted using three-dimensional (3D) electromagnetic simulations to delve into the coupling of THz radiation to the channel of the transistor. 3D simulations solving the Maxwell equations using a time-domain solver were performed. Simulations considering the full transistor structure, but without taking into account the bonding wires used to contact the transistor pads in experiments, showed an irrelevant role of the gate length in the coupling of the radiation to the device channel. Simulations, in contradiction with measurements, pointed to a better response at 0.3 THz than under 0.15 THz excitation in terms of the normalized electric field inside the channel. When including four 0.25 mm long bonding wires connected to the contact pads on the transistor, the normalized internal electric field induced along the transistor channel by the 0.15 THz beam was increased in 25 dB, revealing, therefore, the important role played by the bonding wires at this frequency. As a result, the more intense response of the transistor at 0.15 THz than at 0.3 THz experimentally found, must be attributed to the bonding wires., This research was funded by the Ministerio de Ciencia, Investigacion y Universidades of Spain (Spanish Ministry of Science, Innovation, and Universities) and FEDER (ERDF: European Regional Development Fund) under the Research Grants numbers RTI2018-097180-B-100, PID2019-107885GB-C3-2 and TEC2016-78028-C3-3-P and FEDER/Junta de Castilla y Leon Research Grant numbers SA256P18 and SA121P20. Also by Conselleria d'Educacio, lnvestigacio, Cultura i Esport, Generalitat Valenciana (Spain) through the grant AIC0/2019/018. The APC was funded by Universidad de Salamanca.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multiport broadband 5G MIMO antenna with very high isolation

  • Llanga-Vargas, Aníbal
  • Peñafiel-Ojeda, Carlos Ramiro
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper presents a new unidirectional radiating structure with 4 independent radiation patterns, with an isolation of more than 24 dB, and with a bandwidth of 20 %, oriented for use in 5G indoor MIMO base stations. The element can be used as a building block for arrays with a number of antennas of 4x4 or more. The radiating elements are triangular cavities derived from a square cavity with the TMz 11 mode. The 4-port antenna has a very low profile, with a height of 5 mm and the dimensions of the ground plane are less than one wavelength., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovacion) under project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

PIFA antenna for smart watch application in the 2.4 GHz band

  • Abdelhakim, Adli
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper presents a Planar Inverted-F Antenna (PIFA) design for a smartwatch application, optimized to operate on the 2.4 GHz Bluetooth frequency band, on the proximity of the human forearm. The PIFA antenna is mounted on the watchstrap that is used as the antenna substrate. The antenna is fed in a singular way, since a coplanar wave-guide (CPW) transmission line is used to excite the antenna. The antenna is integrated in the watchstrap, curved over the phantom forearm and simulated along with the watchcase. A return loss of ¿20 dB is obtained at 2.4 GHz, and an efficiency of ¿5 dB, which represents a good efficiency taking into account the effect of the human forearm., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovación) under project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Design of a PIFA antenna integrated in the watchstrap for smart watch application in the 2.4 GHz Bluetooth band

  • Abdelhakim, Adli
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper presents a Planar Inverted-F Antenna (PIFA) design for a smartwatch application, optimized to operate on the 2.4 GHz Bluetooth frequency band, on the proximity of the human forearm. The PIFA antenna is mounted on the watchstrap that is used as the antenna substrate. The antenna is fed in a singular way, since a coplanar wave-guide (CPW) transmission line is used to excite the antenna. The antenna is integrated in the watchstrap, curved over the phantom forearm and simulated along with the watchcase. A return loss of ¿20 dB is obtained at 2.4 GHz, and an efficiency of -5 dB, which represents a good efficiency taking into account the effect of the human forearm., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovación) under project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Antena de cuatro puertos de banda ancha con bloque aislante para estaciones base 5G Sub-6 GHz

  • Molins-Benlliure, Jaime
  • Jofre-Roca, L.
  • Juan-Llacer, L.
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[ES] Este artículo propone una antena de cuatro puertos con respaldo de cavidad de banda ancha para aplicaciones de estaciones base interiores. La antena esta compuesta por una cavidad abierta de forma cuadrada con un bloque aislante en forma de X situado en el centro y 4 monopolos dispuestos de forma simétrica en la apertura de la cavidad. Para su diseño se ha utilizado una metodología basada en el análisis de modos característicos (CMA) para identificar los modos que contribuyen al acoplamiento y justificar el uso del bloque en forma de X para incrementar el aislamiento entre puertos. La antena dispone de cuatro diagramas de radiación unidireccionales y un ancho de banda (S11<-10 dB) que opera desde 1.55 hasta los 6 GHz (118 %), cubriendo la mayoría de las bandas 5G sub-6 GHz. El aislamiento entre puertos es de mínimo 16 dB y la eficiencia superior al 84 %. La antena es de fácil fabricación y presenta un tamaño compacto de 129.5×129.5×28.2 mm3 (0.68¿×0.68¿×0.15¿, a la frecuencia mínima f=fmin=1.55 GHz).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Optimization of 2D Heterogeneous Lenses via BFGS and Volume Integral Equation Method

  • Vico Bondía, Felipe|||0000-0003-1292-3657
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
  • Antonino Daviu, Eva|||0000-0002-0163-4561
[EN] In this paper we apply a quasi-Newton optimization algorithm called BFGS to optimize heterogeneous lenses in 2D by using the volume integral equation method. Different preliminary designs are presented with frequency selective focal point., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovacion) under project PID2019-107885GB-C32. We would like to thank Prof. Leslie Greengard and for many useful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Responsivity enhancement of a strained silicon field-effect transistor detector at 0.3 THz using the terajet effect

  • Minin, Igor Vladilenovich
  • Minin, Oleg Vladilenovich
  • Salvador-Sánchez, Juan
  • Delgado-Notario, Juan Antonio
  • Calvo-Gallego, Jaime
  • Fobelets, Kristel
  • Velázquez-Pérez, Jesús Enrique
  • Meziani, Yahya Moubarak
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] We report on the enhancement of responsivity by more than one order of magnitude of a silicon-based sub-terahertz detector when a mesoscopic dielectric particle was used to localize incident radiation to a sub-wavelength volume and focus it directly onto the detector. A strained-silicon modulation field-effect transistor was used as a direct detector on an incident terahertz beam at 0.3 THz. A systematic study in which Teflon cubes were placed in front of the detector to focus the terahertz beam was performed. In this study, cubes with different sizes were investigated, and an enhancement of the responsivity up to 11 dB was observed for a cube with an edge length of 3.45 mm (or 3.45 lambda). Electromagnetic simulation results were in good agreement with the experimental ones and demonstrated that the size of the mesoscopic particle plays an important role in focalizing the electric field within an area below the diffraction limit. This approach provides an efficient, uncostly, and easy to implement method to substantially improve the responsivity and noise equivalent power of sub-terahertz detectors., Tomsk Polytechnic University Development Program; Ministerio de Ciencia, Innovacion y Universidades (PID2019-107885GB-C32, RTI2018-097180-B-100, TEC2016-78028-C3-3-P); Junta de Castilla y Leon (SA121P20, SA256P18); Conselleria d'Educacio, Investigacio, Cultura i Esport (AIC0/2019/018); European Regional Development Fund; Fundacja na rzeczNauki Polskiej (CENTERA-IRA MAB/2018/9)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis de las pérdidas de propagación medidas en una plantación de cítricos en las bandas de 1800 MHz, 2100 MHz, 3.5 GHz y 28 GHz en una situación de LoS

  • Juan-Llácer, Leandro
  • Martínez Rubiola, Luis
  • Molina-García-Pardo, José María
  • Martínez-Inglés, María Teresa
  • Rodríguez, José-Víctor
  • Pascual-García, Juan
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] Agriculture 4.0 is going to represent a massive deployment of sensors, so efficient planning of radiocommunication systems in this type of environment will be necessary. In this work, the measured path loss in a LoS situation, with the transmitter and receiver heights below the trees height, at a citrus plantation in the 1800MHz, 2100MHz, 3.5GHz and 28GHz frequency bands using the FI (Floating Intercept) and the CI (Close-In reference) models has been analyzed. It has been observed that from 3.5GHz, the slope of the FI model also represents the propagation exponent (PLE). Furthermore, a guiding effect (PLE less than 2) has been observed in the 1800MHz and 2100MHz bands, not in the 3.5GHz and 28GHz bands, in which the PLE is practically equal to 2 (free space). Finally, the analysis of the polarization reveals that the standard deviation of the measured values with respect to the values obtained from the models is greater for horizontal than vertical polarization in the 1800MHz and 2100MHz frequency bands., Este trabajo ha sido financiado por la Comunidad Autónoma de la Región de Murcia a través del proyecto 20804/PI/18 de la convocatoria de Ayudas a proyectos para el desarrollo de investigación científica y técnica por grupos competitivos, incluida en el Programa Regional de Fomento de la Investigación (Plan de Actuación 2019) de la Fundación Séneca, Agencia de Ciencia y Tecnología de la Región de Murcia y por el Ministerio de Economía y Competitividad MINECO (PID2019-107885GB-C33).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Analysis and Design of Reconfigurable Antennas Using the Theory of Characteristic Modes

  • Mahlaoui Boudallaa, Zakaria
[ES] La Teoría de los Modos Característicos, formulada originalmente en 1968, permite obtener un conjunto de valores propios reales y modos de corriente reales que se pueden utilizar para expandir la corriente total en un cuerpo conductor o dieléctrico. La información proporcionada por las corrientes características (modos) y los valores propios se puede utilizar para realizar el diseño de la antena de una manera sistemática. La gran ventaja de la Teoría de los Modos Característicos sobre otros métodos de diseño tradicionales es la clara visión física que se proporciona sobre los fenómenos que contribuyen a la radiación de la antena. Esta visión física permite comprender mejor el funcionamiento de la antena, de modo que el diseño y la optimización de la misma se pueden llevar a cabo de forma rápida y coherente. El objetivo de esta Tesis es extender el uso de la Teoría de los Modos Característicos al diseño de antenas reconfigurables de manera sistemática. El uso de antenas reconfigurables se ha vuelto cada vez más importante en los últimos años, como una forma de cumplir con los requisitos impuestos y el rendimiento deseado en los nuevos sistemas de comunicaciones inalámbricas. El enfoque de hacer una antena reconfigurable implica la capacidad de una antena para ajustar sus características, como la frecuencia de operación, el diagrama de radiación y la polarización. Diversos componentes activos como diodos varactor, diodos PIN, MEMS, interruptores de RF, elementos fotoconductores o materiales inteligentes pueden usarse para cambiar estas características básicas de la antena. La reconfiguración dinámica de los parámetros operativos de una antena conduce a un sistema de comunicación flexible. Las antenas reconfigurables por frecuencia permiten el mantenimiento de múltiples estándares mientras se mantienen las mismas características físicas de las antenas. La antena reconfigurable por radiación y la diversidad de polarización permiten aumentar la eficiencia de las comunicaciones interiores al reducir significativamente el nivel de interferencia. En esta tesis, la investigación gira en torno al análisis y diseño de estructuras de antenas con la Teoría de los Modos Característicos de manera que los parámetros de las antenas sean sintonizables, por lo que el diseño final de la estructura es una antena reconfigurable que modifica dinámicamente su rendimiento de una forma razonada y coherente. Se analizarán los modos característicos y sus propiedades para diseñar antenas reconfigurables, que combinarán diferentes modos y producirán diferentes características de radiación. En este trabajo se implementará un método sistemático para obtener las características requeridas de la antena. Además, se analizarán y evaluarán diferentes técnicas de conmutación para evaluar su efecto real en la antena y en los modos característicos. El trabajo se centrará en el diseño de pequeñas antenas reconfigurables para aplicaciones IoT y sistemas 5G., [CA] La Teoria dels Modes Característics, formulada originalment el 1968, permet obtenir un conjunt de valors propis reals i modes de corrent reals que es poden utilitzar per expandir el corrent total en un cos conductor o dielèctric. La informació proporcionada pels corrents característics (modes) i els valors propis es pot utilitzar per fer el disseny de l'antena d'una manera sistemàtica. El gran avantatge de la Teoria dels Modes Característiques sobre altres mètodes de disseny tradicionals és la clara visió física que es proporciona sobre els fenòmens que contribueixen a la radiació de l'antena. Aquesta visió física permet comprendre millor el funcionament de l'antena, de manera que el disseny i l'optimització de la mateixa es poden dur a terme de forma ràpida i coherent. L'objectiu d'aquesta Tesi és estendre l'ús de la Teoria dels Modes Característics al disseny d'antenes reconfigurables de manera sistemàtica. L'ús d'antenes reconfigurables s'ha tornat cada cop més important en els darrers anys, com una forma de complir amb els requisits imposats i el rendiment desitjat en els nous sistemes.temes de comunicacions sense fil. L'enfocament de fer una antenna reconfigurable implica la capacitat duna antena per ajustar les seves característiques, com la frequ¿ència d'operació, el diagrama de radiació i la polarització. Diversos components actius com va donar dos varactor, díodes PIN, MEMS, interruptors de RF, elements fotoconductors o materials intel·ligents poden utilitzar-se per canviar aquestes característiques bàsiques de l'antena. La reconfiguració dinàmica dels paràmetres operatius duna antena condueix a un sistema de comunicació flexible. Les antenes reconfigurables per frequ¿ència permeten el manteniment de múltiples estàndards mentre es mantenen les mateixes característiques físiques de les antenes. L'antena reconfigurable per radiació i diversitat de polarització permeten augmentar l'eficiència de les comunicacions interiors en reduir significativament el nivell dinterferència. En aquesta tesi, la investigació gira al voltant de l'anàlisi i el disseny de estructures d'antenes amb la Teoria dels Modes Característics de manera que els paràmetres de les antenes siguin sintonitzables, per això que el disseny final de lestructura és una antena reconfigurable que modifica dinàmicament el seu rendiment d'una forma raonada i coherent. S'analitzaran els modes característics i les propietats per dissenyar antenes reconfigurables, que combinaran diferents maneres i produiran diferents característiques de radiació. En aquest tractament baix s'implementarà un mètode sistemàtic per obtenir les característiques requerides de l'antena. A més, s'analitzaran i avaluaran diferents tècniques de commutació per avaluar el seu efecte real a la antena i en les maneres característiques. El treball se centrarà en el disseny de petites antenes reconfigurables per a aplicacions IoT i sistemes 5G., [EN] The Theory of Characteristic Modes, originally formulated in 1968, allows to obtain a set of real eigenvalues and real current modes that can be used to expand the total current on a conducting or dielectric body. The information provided by characteristic eigencurrents (modes) and eigenvalues can be used to perform antenna design in a systematic way. The great advantage of the Theory of Characteristic Modes over other traditional design methods is the clear physical vision provided about the phenomena that contribute to the radiation of the antenna. This physical vision allows to better understand the operation of the antenna, so that the design and the optimization of it can be carried out quickly and coherently. The objective of this Thesis is to extend the use of the Theory of Characteristic Modes to the design of reconfigurable antennas in a systematic way. The use of reconfigurable antennas has become more and more important during the last years, as a way to meet the imposed requirements and desired performance of novel wireless communication systems. The approach of making an antenna reconfigurable implies the capability of an antenna system to adjust its characteristic such as operating frequency, radiation pattern and polarization. Active components such as varactor diodes, PIN diodes, MEMS, RF switches, photoconductive elements or smart materials can be used to change these base characteristics. The dynamic reconfigurability of the operating parameters of an antenna leads to a flexible communication system. Frequency reconfigurable antennas enable multi-standard performances to be maintained while preserving the same physical characteristics of the antennas. Radiation reconfigurable and polarisation diversity antennas enable to increase the efficiency of indoor communications by significantly decreasing the level of interference. In this thesis, the research is turning around the analysis and design of antenna structures with the Theory of Characteristic Modes in a way that the antenna parameters will be tuneable, so the final design of the structure is a reconfigurable antenna that modifies dynamically its performance in a reasoned and coherent way. Characteristic modes and their properties will be analysed in order to design reconfigurable antennas, which combine different modes and produce different radiation characteristics. A systematic method to obtain the required characteristics of the antenna will be implemented during this work. Moreover, different switching techniques will be analysed and evaluated in order to asses their real effect on the antenna and on the characteristic modes. In this work, small reconfigurable antenna prototypes will be designed for IoT applications and 5G systems., This study was supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovación) under project no. PID2019-107885GB-C32 and Generalitat Valenciana under project no. AICO/2019/018. This work has also been supported by the Spanish Ministry of Science, Innovation and Universities (Ministerio Ciencia, Innovación y Universidades) under the project TEC2016- 78028-C3-3-P and by “Centre National pour la Recherche Scientifique et Technique (CNRST, Maroc)” as part of the research excellence scholarships program
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Miniaturized On-Ground 2.4 GHz IoT LTCC Chip Antenna and Its Positioning on a Ground Plane

  • Molins-Benlliure, Jaime
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper presents a very low-profile on-ground chip antenna with a total volume of 0.075¿0× 0.056¿0× 0.019¿0 (at f0 = 2.4 GHz). The proposed design is a corrugated (accordion-like) planar inverted F antenna (PIFA) embedded in low-loss glass ceramic material (DuPont GreenTape 9k7 with ¿r = 7.1 and tan¿ = 0.0009) fabricated with LTCC technology. The antenna does not require a clearance area on the ground plane where the antenna is located, and it is proposed for 2.4 GHz IoT applications for extreme size-limited devices. It shows a 25 MHz impedance bandwidth (for S11 < -6 dB), which means a relative bandwidth of 1%). A study in terms of matching and total efficiency is performed for several size ground planes with the antenna installed at different positions. The use of characteristic modes analysis (CMA) and the correlation between modal and total radiated fields is performed to demonstrate the optimum position of the antenna. Results show high-frequency stability and a total efficiency difference of up to 5.3 dB if the antenna is not placed at the optimum position., This work has been supported by the Spanish Ministry of Science and Innovation (Ministerio de Ciencia e Innovación) under project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sector Unit-Cell Methodology for the Design of Sub-6 GHz 5G MIMO Antennas

  • Molins-Benlliure, Jaime
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] A novel methodology based on the sectorization of multiple-port cavities with azimuthal symmetry into sector unit cells is presented to design 5G multiple-input multiple-output (MIMO) sub-6 GHz antennas. The methodology divides an N-port cavity antenna into N unit cells and predicts the performance of the N-port design with the analysis of two adjacent cells. This approximation reduces the time and complexity of the simulation of cavity antennas with a high number of ports. For the theoretical justification, cavity mode analysis of a closed cavity and characteristic modes analysis of open and sector cavities is addressed. With the use of the proposed methodology, five different cavity designs with circular, square, hexagonal, octagonal, and saw-tooth geometries are presented in this article. In addition, the fabrication of the 4-port circular shape design and its MIMO performance is also studied. Results show an impedance bandwidth of 130% (1.27-6 GHz), and an envelope correlation coefficient (ECC) lower than 0.1., This work was supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovacion) under Project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On-ground Small LTCC Chip Antenna and its Placement on IoT Devices

  • Molins-Benlliure, Jaime
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] A low-profile on-ground chip antenna is presented to be installed in size-limited devices for 868 MHz Internet of Things applications. The antenna presents a size of 0.064 × 0.045 × 0.007¿3 0, has been fabricated in low-temperature cofired ceramic technology, and is meant to be placed on a ground plane without a clearance area required. A study regarding matching and total efficiency is performed by analyzing the antenna in different positions of a variable-size ground plane with the use of characteristic modes analysis and the correlation between modal and total radiated fields. The analysis demonstrates through the correlation which are the excited modes of the ground plane and, consequently, which is the best position for the antenna. Results show frequency stability and a total efficiency difference of up to 8.8 dB between different positions., This work was supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovación) under project PID2019-107885GB-C32. (Corresponding author: Jaime Molins-Benlliure.)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Radiation Pattern Reconfigurable Antenna for IoT Devices

  • Mahlaoui, Zakaria
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] Based on the characteristic mode theory, a versatile radiation pattern reconfigurable antenna is proposed. )e analysis starts from two parallel metallic plates with the same and different dimensions. By means of two PIN diodes, the size of one of the parallel metallic plates can be modified and consequently the behavior of the radiation pattern can be switched between bidirectional and unidirectional radiation patterns. Moreover, a SPDT switch is used to adjust the frequency and match the input impedance. )e reconfigurable antenna prototype has been assembled and tested, and a good agreement between simulated and measured results is obtained at 2.5 GHz band which fits the IoT applications., This study was supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovacion) under project no. PID2019-107885GB-C32 and Generalitat Valenciana under project no. AICO/2019/018.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-profile UWB antenna with unidirectional radiation pattern analyzed with the theory of characteristic modes

  • Peñafiel-Ojeda, Carlos Ramiro
  • Llanga-Vargas, Aníbal
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper presents a low-profile Ultra Wide Band (UWB) antenna with polarization diversity for new 5G base stations. The antenna consists of a metallic ring capacitively fed with four circular monopoles and reinforced with a cylindrical cavity to generate a unidirectional radiation pattern. The Theory of Characteristic Modes is used to analyze and explain the behaviour of the proposed antenna excited with differential feeding configurations. A prototype of the optimized design has been manufactured and measured, yielding good impedance matching (S-11 <-10 dB) from 3 GHz to 6 GHz with maximum directivity of 10.51 dBi. Measured and simulated results are in good agreement, This work has been supported by the Spanish Ministry of Science, Innovation, and Universities (Ministerio de Ciencia, Innovacion y Universidades) under the program PID2019-107885 GB-C3-2
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Four-Port Wide-Band Cavity-Backed Antenna With Isolating X-Shaped Block for Sub-6 GHz 5G Indoor Base Stations

  • Molins-Benlliure, Jaime
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] A four-port wideband cavity-backed antenna is presented for indoor base stations applications. The antenna is composed of a square open cavity with an X-shaped isolating block and 4 feeding monopoles symmetrically and orthogonally arranged in the aperture of the cavity. A novel methodology based on Characteristic Modes Analysis (CMA) is used for identifying the modes which are contributing to the coupling. As a result of this analysis, an X-shaped isolating block placed at the center of the cavity is proposed for increasing the isolation between ports. A wide-band four-port antenna with unidirectional radiation patterns is obtained with a measured impedance bandwidth (S-11< 10 dB) ranging from 1.55 to 6 GHz (118%), covering most of the sub-6 GHz 5G bands. The proposed antenna provides four independent radiation patterns, with 16 dB of measured minimum isolation between ports and an efficiency higher than 84%. Multiple-input multiple-output (MIMO) compatibility is confirmed with a 4 x 4 MIMO simulated system with an envelope correlation coefficient (ECC)<0.5 in different propagation conditions. The antenna is easy to fabricate and presents a compact size of 129:5 x 129:5 x 28.2 mm(3) (0.68 lambda x0.68 lambda x0.15 lambda, at a frequency f = f(min) = 1.55 GHz). Moreover, the antenna has the advantage of avoiding complex feeding structures with baluns or directional couplers., This work was supported by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovacion) under Project PID2019-107885GB-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast multipole methods for the evaluation of layer potentials with locally-corrected quadratures

  • Greengard, Leslie
  • O Neil, Michael
  • Rachh, Manas
  • Vico Bondía, Felipe|||0000-0003-1292-3657
[EN] While fast multipole methods (FMMs) are in widespread use for the rapid evaluation of potential fields governed by the Laplace, Helmholtz, Maxwell or Stokes equations, their coupling to high-order quadratures for evaluating layer potentials is still an area of active research. In three dimensions, a number of issues need to be addressed, including the specification of the surface as the union of high-order patches, the incorporation of accurate quadrature rules for integrating singular or weakly singular Green's functions on such patches, and their coupling to the oct-tree data structures on which the FMM separates near and far field interactions. Although the latter is straightforward for point distributions, the near field for a patch is determined by its physical dimensions, not the distribution of discretization points on the surface. Here, we present a general framework for efficiently coupling locally corrected quadratures with FMMs, relying primarily on what are called generalized Gaussian quadratures rules, supplemented by adaptive integration. The approach, however, is quite general and easily applicable to other schemes, such as Quadrature by Expansion (QBX). We also introduce a number of accelerations to reduce the cost of quadrature generation itself, and present several numerical examples of acoustic scattering that demonstrate the accuracy, robustness, and computational efficiency of the scheme. On a single core of an Intel i5 2.3 GHz processor, a Fortran implementation of the scheme can generate near field quadrature corrections for between 1000 and 10,000 points per second, depending on the order of accuracy and the desired precision. A Fortran implementation of the algorithm described in this work is available at https://gitlab.com/fastalgorithms/fmm3dbie., We would like to thank Alex Barnett and Lise-Marie Imbert-Gérard for many useful discussions, and Jim Bremer and Zydrunas Gimbutas for sharing several useful quadrature codes. We also gratefully acknowledge the support of the NVIDIA Corporation with the donation of a Quadro P6000, used for some of the visualizations presented in this research. L. Greengard was supported in part by the Office of Naval Research under award number #N00014-18-1-2307. M. O¿Neil was supported in part by the Office of Naval Research under award numbers #N00014-17-1-2059, #N00014-17-1-2451, and #N00014-18-1-2307. F. Vico was supported in part by the Office of Naval Research under award number #N00014- 18-2307, the Generalitat Valenciana under award number AICO/2019/018, and by the Spanish Ministry of Science and Innovation (Ministerio Ciencia e Innovación) under award number PID2019-107885GB-C32. We would also like to thank the anonymous referees for many helpful comments that led to a much-improved manuscript