Pasar al contenido principal

INGENIERIA MOLECULAR DE MATERIALES SUPERCONDUCTORES Y FERROMAGNETICOS BIDIMENSIONALES (2D): HACIA PROPIEDADES FISICAS A LA CARTA

PID2019-108153GA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario ASOC CIC NANOGUNE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene transistors for real-time monitoring molecular self-assembly dynamics

  • Gobbi, Marco
  • Galanti, Agostino
  • Stoeckel, Marc-Antoine
  • Zyska, Björn
  • Bonacchi, Sara
  • Hecht, Stefan
  • Samorì, Paolo
Mastering the dynamics of molecular assembly on surfaces enables the engineering of predictable structural motifs to bestow programmable properties upon target substrates. Yet, monitoring self-assembly in real time on technologically relevant interfaces between a substrate and a solution is challenging, due to experimental complexity of disentangling interfacial from bulk phenomena. Here, we show that graphene devices can be used as highly sensitive detectors to read out the dynamics of molecular self-assembly at the solid/liquid interface in-situ. Irradiation of a photochromic molecule is used to trigger the formation of a metastable self-assembled adlayer on graphene and the dynamics of this process are monitored by tracking the current in the device over time. In perspective, the electrical readout in graphene devices is a diagnostic and highly sensitive means to resolve molecular ensemble dynamics occurring down to the nanosecond time scale, thereby providing a practical and powerful tool to investigate molecular self-organization in 2D., We acknowledge funding from the European Commission through the ERC projects SUPRA2DMAT (GA-833707) and Light4Function (GA-308117), the Graphene Flagship Core 3 project (GA-881603), the Marie Sklodowska-Curie projects ITN project ULTIMATE (GA-813036), the M-ERA.NET project MODIGLIANI, the Agence Nationale de la Recherche through the Labex projects CSC (ANR-10-LABX-0026 CSC) and NIE (ANR-11-LABX-0058 NIE) within the Investissement d’Avenir program (ANR-10-120 IDEX-0002-02), the International Center for Frontier Research in Chemistry (icFRC), the German Research Foundation (DFG via SFB 658 and SFB 951, project no. 182087777) and the Spanish MICINN under Project PID2019-108153GA-I00. The project leading to these results has received funding from “la Caixa” Foundation (ID 100010434). The Fellowship code is LCF/BQ/PI19/11690017., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring superconductivity in large-area single-layer NbSe2 via self-assembled molecular adlayersl

  • Calavalle, Francesco
  • Dreher, Paul
  • Surdendran, Ananthu P.
  • Wan, Wen
  • Timpel, Melanie
  • Verucchi, Roberto
  • Rogero, Celia
  • Bauch, Thilo
  • Lombardi, Floriana
  • Casanova, Félix
  • Vittorio Nardi, Marco
  • Ugeda, Miguel M.
  • Hueso, Luis E.
  • Gobbi, Marco
Two-dimensional transition metal dichalcogenides (TMDs) represent an ideal testbench for the search of materials by design, because their optoelectronic properties can be manipulated through surface engineering and molecular functionalization. However, the impact of molecules on intrinsic physical properties of TMDs, such as superconductivity, remains largely unexplored. In this work, the critical temperature (TC) of large-area NbSe2 monolayers is manipulated, employing ultrathin molecular adlayers. Spectroscopic evidence indicates that aligned molecular dipoles within the self-assembled layers act as a fixed gate terminal, collectively generating a macroscopic electrostatic field on NbSe2. This results in an ∼55% increase and a 70% decrease in TC depending on the electric field polarity, which is controlled via molecular selection. The reported functionalization, which improves the air stability of NbSe2, is efficient, practical, up-scalable, and suited to functionalize large-area TMDs. Our results indicate the potential of hybrid 2D materials as a novel platform for tunable superconductivity., This work was supported by the European Union H2020 under the Marie Sklodowska-Curie Actions (766025-QuESTech and 748971-SUPER2D) and by the ERC Starting Grant LINKSPM (Grant 758558), by “la Caixa” Foundation (ID 100010434), under the agreement LCF/BQ/PI19/11690017 and by the Spanish MICINN under the Maria de Maeztu Units of Excellence Programme (MDM-2016-0618), Project No. MAT2015-65159-R, MAT2017-88377-C2-1-R, RTI2018-094861-B-100 and PID2019-108153GA-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin hall magnetoresistance effect from a disordered interface

  • Catalano, Sara
  • Gomez-Perez, Juan M.
  • Xochitl Aguilar-Pujol, M.
  • Chuvilin, Andrey
  • Gobbi, Marco
  • Hueso, Luis E.
  • Casanova, Félix
The spin Hall magnetoresistance (SMR) emerged as a reference tool to investigate the magnetic properties of materials with an all-electrical setup. Its sensitivity to the magnetization of thin films and surfaces may turn it into a valuable technique to characterize van der Waals magnetic materials, which support long-range magnetic order in atomically thin layers. However, realistic surfaces can be affected by defects and disorder, which may result in unexpected artifacts in the SMR, rather than the sole appearance of electrical noise. Here, we study the SMR response of heterostructures combining a platinum (Pt) thin film with the van der Waals antiferromagnet MnPSe3 and observe a robust SMR-like signal, which turns out to originate from the presence of strong interfacial disorder in the system. We use transmission electron microscopy (TEM) to characterize the interface between MnPSe3 and Pt, revealing the formation of a few nanometer-thick platinum–chalcogen amorphous layer. The analysis of the transport and TEM measurements suggests that the signal arises from a disordered magnetic system formed at the Pt/MnPSe3 interface, washing out the interaction between the spins of the Pt electrons and the MnPSe3 magnetic lattice. Our results show that the damaged interfaces can yield an important contribution to SMR, questioning a widespread assumption on the role of disorder in such measurements., The authors also thank SGIker Medidas Magneticas Gipuzkoa (UPV/EHU/ ERDF, EU) for the technical and human support. This work is supported by the European Union H2020 under the Marie Sklodowska-Curie Actions (796817-ARTEMIS and 748971-SUPER2D) and by the Spanish MICINN under project nos. RTI2018-094861-B-I00, PID2019-108153GA-I00, and the Maria de Maeztu Units of Excellence Programme (MDM-2016-0618 and CEX2020-001038-M). J.M.G.-P. and M.X.A.-P. thank the Spanish MICINN for a Ph.D. fellowship (grants no. BES-2016-077301 and PRE-2019-089833, respectively). M.G. acknowledges support from la Caixa Foundation for a Junior Leader fellowship (grant no. LCF/BQ/PI19/11690017)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the magnetic properties of NiPS3through organic-ion intercalation

  • Tezze, Daniel
  • Pereira, José M.
  • Asensio, Yaiza
  • Ipatov, Mihail
  • Calavalle, Francesco
  • Casanova, Félix
  • Bittner, Alexander M.
  • Ormaza, Maider
  • Martín-García, Beatriz
  • Hueso, Luis E.
  • Gobbi, Marco
Atomically thin van der Waals magnetic crystals are characterized by tunable magnetic properties related to their low dimensionality. While electrostatic gating has been used to tailor their magnetic response, chemical approaches like intercalation remain largely unexplored. Here, we demonstrate the manipulation of the magnetism in the van der Waals antiferromagnet NiPS3 through the intercalation of different organic cations, inserted using an engineered two-step process. First, the electrochemical intercalation of tetrabutylammonium cations (TBA+) results in a ferrimagnetic hybrid compound displaying a transition temperature of 78 K, and characterized by a hysteretic behavior with finite remanence and coercivity. Then, TBA+ cations are replaced by cobaltocenium via an ion-exchange process, yielding a ferrimagnetic phase with higher transition temperature (98 K) and higher remanent magnetization. Importantly, we demonstrate that the intercalation and cation exchange processes can be carried out in bulk crystals and few-layer flakes, opening the way to the integration of intercalated magnetic materials in devices., The authors acknowledge R. Llopis and A. Eleta for technical support. This work is supported by “la Caixa” Foundation (ID 100010434), under the agreement LCF/BQ/PI19/11690017, by the Spanish MICINN under Project PID2019-108153GA-I00, RTI2018-094861-B-100 and under the María de Maeztu Units of Excellence Program (MDM-2016-0618). B. M.-G. thanks Gipuzkoa Council (Spain) in the frame of Gipuzkoa Fellows Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exchange bias in molecule/Fe3GeTe2 van der Waals heterostructures via spinterface effects

  • Jo, Junhyeon
  • Calavalle, Francesco
  • Martín-García, Beatriz
  • Tezze, Daniel
  • Casanova, Félix
  • Chuvilin, Andrey
  • Hueso, Luis E.
  • Gobbi, Marco
The exfoliation of layered magnetic materials generates atomically thin flakes characterized by an ultrahigh surface sensitivity, which makes their magnetic properties tunable via external stimuli, such as electrostatic gating and proximity effects. Another powerful approach to engineer magnetic materials is molecular functionalization, generating hybrid interfaces with tailored magnetic interactions, called spinterfaces. However, spinterface effects have not yet been explored on layered magnetic materials. Here, the emergence of spinterface effects is demonstrated at the interface between flakes of the prototypical layered magnetic metal Fe3GeTe2 and thin films of Co-phthalocyanine. Magnetotransport measurements show that the molecular layer induces a magnetic exchange bias in Fe3GeTe2, indicating that the unpaired spins in Co-phthalocyanine develop antiferromagnetic ordering and pin the magnetization reversal of Fe3GeTe2 via magnetic proximity. The effect is strongest for a Fe3GeTe2 thickness of 20 nm, for which the exchange bias field reaches −840 Oe at 10 K and is measurable up to ≈110 K. This value compares very favorably with previous exchange bias fields reported for Fe3GeTe2 in all-inorganic van der Waals heterostructures, demonstrating the potential of molecular functionalization to tailor the magnetism of van der Waals layered materials., This work was supported by “la Caixa” Foundation (ID 100010434), under the agreement LCF/BQ/PI19/11690017, by the Spanish MICINN under Project PID2019-108153GA-I00, RTI2018-094861-B-100 and under the María de Maeztu Units of Excellence Program (MDM-2016-0618). This work was also supported by the FLAG-ERA grant MULTISPIN, by the Spanish MCIN/AEI with grant number PCI2021-122038-2A. B.M.-G. thanks Gipuzkoa Council (Spain) in the frame of Gipuzkoa Fellows Program. J.J. acknowledges the support of Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (2020R1A6A3A03039086)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gate-tuneable and chirality-dependent charge-to-spin conversion in tellurium nanowires

  • Calavalle, Francesco
  • Suárez-Rodríguez, Manuel
  • Martín-García, Beatriz
  • Johansson, Annika
  • Vaz, Diogo C.
  • Yang, Haozhe
  • Maznichenko, I. V.
  • Ostanin, Sergey
  • Mateo-Alonso, Aurelio
  • Chuvilin, Andrey
  • Mertig, I.
  • Gobbi, Marco
  • Casanova, Félix
  • Hueso, Luis E.
Chiral materials are an ideal playground for exploring the relation between symmetry, relativistic effects and electronic transport. For instance, chiral organic molecules have been intensively studied to electrically generate spin-polarized currents in the last decade, but their poor electronic conductivity limits their potential for applications. Conversely, chiral inorganic materials such as tellurium have excellent electrical conductivity, but their potential for enabling the electrical control of spin polarization in devices remains unclear. Here, we demonstrate the all-electrical generation, manipulation and detection of spin polarization in chiral single-crystalline tellurium nanowires. By recording a large (up to 7%) and chirality-dependent unidirectional magnetoresistance, we show that the orientation of the electrically generated spin polarization is determined by the nanowire handedness and uniquely follows the current direction, while its magnitude can be manipulated by an electrostatic gate. Our results pave the way for the development of magnet-free chirality-based spintronic devices., This work is supported by the Spanish Ministerio de Ciencia e Innovación (MICINN) under projects RTI2018-094861-B-100 and PID2019-108153GA-I00 and under the Maria de Maeztu Units of Excellence Programme (MDM-2016-0618); by the European Union Horizon 2020 under the Marie Slodowska-Curie Actions (0766025-QuESTech and 892983-SPECTER); and by Intel Corporation under ‘FEINMAN’ and ‘VALLEYTRONICS’ Intel Science Technology Centers. B.M.-G. acknowledges support from the Gipuzkoa Council (Spain) in the frame of the Gipuzkoa Fellows Program. M.S.-R. acknowledges support from La Caixa Foundation (no. 100010434) with code LCF/BQ/DR21/11880030. M.G. acknowledges support from La Caixa Foundation (no. 100010434) for a Junior Leader fellowship (grant no. LCF/BQ/PI19/11690017). A.J. acknowledges support from CRC/TRR 227 of Deutsche Forschungsgemeinschaft., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular approach to engineer two-dimensional devices for CMOS and beyond-CMOS applications

  • Zhao, Yuda
  • Gobbi, Marco
  • Hueso, Luis E.
  • Samorì, Paolo
Two-dimensional materials (2DMs) have attracted tremendous research interest over the last two decades. Their unique optical, electronic, thermal, and mechanical properties make 2DMs key building blocks for the fabrication of novel complementary metal-oxide-semiconductor (CMOS) and beyond-CMOS devices. Major advances in device functionality and performance have been made by the covalent or noncovalent functionalization of 2DMs with molecules: while the molecular coating of metal electrodes and dielectrics allows for more efficient charge injection and transport through the 2DMs, the combination of dynamic molecular systems, capable to respond to external stimuli, with 2DMs makes it possible to generate hybrid systems possessing new properties by realizing stimuli-responsive functional devices and thereby enabling functional diversification in More-than-Moore technologies. In this review, we first introduce emerging 2DMs, various classes of (macro)molecules, and molecular switches and discuss their relevant properties. We then turn to 2DM/molecule hybrid systems and the various physical and chemical strategies used to synthesize them. Next, we discuss the use of molecules and assemblies thereof to boost the performance of 2D transistors for CMOS applications and to impart diverse functionalities in beyond-CMOS devices. Finally, we present the challenges, opportunities, and long-term perspectives in this technologically promising field., The activity in Strasbourg was supported by the EC through the ERC project SUPRA2DMAT (GA-833707) and the Graphene Flagship Core 3 project (GA-881603) as well as the Labex projects CSC (ANR-10LABX-0026 CSC) and NIE (ANR-11-LABX-0058 NIE) within the Investissement d’Avenir program ANR-10-IDEX-0002-02 the International Center for Frontier Research in Chemistry and the Institut Universitaire de France (IUF). The activity in San Sebastian was supported by the Spanish MICINN under the Maria de Maeztu Units of Excellence Programme (MDM-2016-0618) and under the Project Nos. RTI2018-094861-B-100 and PID2019-108153GA-I00. M.G. acknowledges support from la Caixa Foundation (ID 100010434) for a Junior Leader fellowship (Grant No. LCF/BQ/PI19/11690017). Y.Z. acknowledged the support from the National Natural Science Foundation of China (62090034, 62104214)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring photoluminescence by strain-engineering in layered perovskite flakes

  • Spirito, Davide
  • Barra-Burillo, María
  • Calavalle, Francesco
  • Manganelli, Costanza Lucia
  • Gobbi, Marco
  • Hillenbrand, Rainer
  • Casanova, Félix
  • Hueso, Luis E.
  • Martín-García, Beatriz
Strain is an effective strategy to modulate the optoelectronic properties of 2D materials, but it has been almost unexplored in layered hybrid organic–inorganic metal halide perovskites (HOIPs) due to their complex band structure and mechanical properties. Here, we investigate the temperature-dependent microphotoluminescence (PL) of 2D (C6H5CH2CH2NH3)2Cs3Pb4Br13 HOIP subject to biaxial strain induced by a SiO2 ring platform on which flakes are placed by viscoelastic stamping. At 80 K, we found that a strain of <1% can change the PL emission from a single peak (unstrained) to three well-resolved peaks. Supported by micro-Raman spectroscopy, we show that the thermomechanically generated strain modulates the bandgap due to changes in the octahedral tilting and lattice expansion. Mechanical simulations demonstrate the coexistence of tensile and compressive strain along the flake. The observed PL peaks add an interesting feature to the rich phenomenology of photoluminescence in 2D HOIPs, which can be exploited in tailored sensing and optoelectronic devices., This work is supported by the Spanish MICINN under Project PID2019-108153GA-I00 and under the María de Maeztu Units of Excellence Programme (MDM-2016-0618). B.M-G. thanks Gipuzkoa Council (Spain) in the frame of Gipuzkoa Fellows Program and to Prof. A. Mateo-Alonso (Molecular and Supramolecular Materials Group - POLYMAT) for the access to the Chemistry Lab to grow the crystals. M.G. acknowledges support from la Caixa Foundation (ID 0010434) for a Junior Leader fellowship (Grant No. LCF/BQ/PI19/11690017)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic properties of layered hybrid organic-Inorganic metal-halide perovskites: Transition metal, organic cation and perovskite phase pffects

  • Asensio, Yaiza
  • Marras, Sergio
  • Spirito, Davide
  • Gobbi, Marco
  • Ipatov, Mihail
  • Casanova, Félix
  • Mateo-Alonso, Aurelio
  • Hueso, Luis E.
  • Martín-García, Beatriz
Understanding the structural and magnetic properties in layered hybrid organic-inorganic metal halide perovskites (HOIPs) is key for their design and integration in spin-electronic devices. Here, a systematic study is conducted on ten compounds to understand the effect of the transition metal (Cu2+, Mn2+, Co2+), organic spacer (alkyl- and aryl-ammonium), and perovskite phase (Ruddlesden-Popper and Dion-Jacobson) on the properties of these materials. Temperature-dependent Raman measurements show that the crystals’ structural phase transitions are triggered by the motional freedom of the organic cations as well as by the flexibility of the inorganic metal-halide lattice. In the case of Cu2+ HOIPs, an increase of the in-plane anisotropy and a reduction of the octahedra interlayer distance is found to change the behavior of the HOIP from that of a 2D ferromagnet to that of a quasi-3D antiferromagnet. Mn2+ HOIPs show inherent antiferromagnetic octahedra intralayer interactions and a phenomenologically rich magnetism, presenting spin-canting, spin-flop transitions, and metamagnetism controlled by the crystal anisotropy. Co2+ crystals with non-linked tetrahedra show a dominant paramagnetic behavior irrespective of the organic spacer and the perovskite phase. This study demonstrates that the chemical flexibility of HOIPs can be exploited to develop novel layered magnetic materials with tailored magnetic properties., This work was supported by the Spanish MCIN/AEI under Projects PID2019-108153GA-I00, RTI2018-094861-B-I00, PID2021-128004NB-C21, and under the María de Maeztu Units of Excellence Programme (Grant CEX2020-001038-M & CEX2020-001067-M). This work was also supported by the FLAG-ERA grant MULTISPIN, by the Spanish MCIN/AEI with grant number PCI2021-122038-2A. This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 722951). Additionally, this work was carried out with support from the Basque Science Foundation for Science (IKERBASQUE), POLYMAT, EHU/UPV, Gipuzkoa Council, and Basque Government (BERC program). Technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF) is also acknowledged. B.M-G. thanks Gipuzkoa Council (Spain) in the frame of Gipuzkoa Fellows Program. M.G. acknowledges support from la Caixa Foundation (ID 0010434) for a Junior Leader fellowship (Grant No. LCF/BQ/PI19/11690017)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Percolating superconductivity in air-stable organic-ion intercalated MoS2

  • Pereira, José M.
  • Tezze, Daniel
  • Niehues, Iris
  • Asensio, Yaiza
  • Yang, Haozhe
  • Mester, Lars
  • Chen, Shu
  • Casanova, Félix
  • Hueso, Luis E.
  • Gobbi, Marco
When doped into a certain range of charge carrier concentrations, MoS2 departs from its pristine semiconducting character to become a strongly correlated material characterized by exotic phenomena such as charge density waves or superconductivity. However, the required doping levels are typically achieved using ionic-liquid gating or air-sensitive alkali-ion intercalation, which are not compatible with standard device fabrication processes. Here, the emergence of superconductivity and a charge density wave phase in air-stable organic cation intercalated MoS2 crystals are reported. By selecting two different molecular guests, it is shown that these correlated electronic phases depend dramatically on the intercalated cation, demonstrating the potential of organic ion intercalation to finely tune the properties of 2D materials. Moreover, it is found that a fully developed zero-resistance state is not reached in few-nm-thick flakes, indicating the presence of 3D superconductive paths that are severed by the mechanical exfoliation. This behavior is ascribed to an inhomogeneous charge carrier distribution, which is probed at the nanoscale using scanning near-field optical microscopy. The results establish organic-ion intercalated MoS2 as a platform to study the emergence and modulation of correlated electronic phases., This work was supported by “la Caixa” Foundation (ID 100010434), under the agreement LCF/BQ/PI19/11690017, by the Spanish Ministerio de Ciencia e Innovación under Projects PID2019-108153GA-I00, PID2021-128004NB-C21, PID2021-123949OB-I00, PID2021-122511OB-I00. This work was also supported by the FLAG-ERA grant MULTISPIN, by the Spanish MCIN/AEI with grant number PCI2021-122038-2A. B.M.-G. thanks Gipuzkoa Council (Spain) in the frame of the Gipuzkoa Fellows Program. This work was supported by CEX2020-001038-M/AEI/10.13039/501100011033 under the Maria de Maeztu Units of Excellence Program. I.N. acknowledges financial support by the German Research Foundation (DFG) under project no. 467576442. The authors also thank SGIker Medidas Magneticas Gipuzkoa (UPV/EHU/ERDF, EU) for the technical and human support., Peer reviewed