Pasar al contenido principal

UTILIZACION DE NANOESTRUCTURAS OBTENIDAS A PARTIR DE DESECHOS COMO ESTRATEGIA DE MEJORA DE MATRICES BIOPOLIMERICAS APLICADAS AL ENVASADO ACTIVO Y BIODEGRADABLE DE MIOSISTEMAS

PID2019-108361RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Green banana (Musa acuminata AAA) wastes to develop an edible film for food applications

  • Salazar, Diego
  • Arancibia, Mirari
  • Casado, Santiago
  • Viteri, Andrès
  • López Caballero, M. Elvira
  • Montero García, Pilar
This article belongs to the Special Issue Polymeric Blend Films Used in Food Packaging., In this study, edible packaging based on discarded green banana (Musa acuminata AAA) flour (whole banana and banana peel flours) was developed for food applications. Films were characterized in terms of film-forming ability, mechanical, barrier, thermal, microbiological, and sensory properties. The film forming solutions were studied for rheological properties. Two formulations were selected based on their film-forming ability: whole banana flour (2.5%), peel flour (1.5%) and glycerol (1.0 %, F-1.0 G or 1.5%, F-1.5 G). Adding 1.5% plasticizer, due to the hygroscopic effect, favored the water retention of the films, increasing the density, which also resulted in a decrease in lightness and transparency. Water activity shows no difference between the two formulations, which were water resistant for at least 25 h. DSC results showed a similar melting temperature (Tm) for both films, around 122 °C. Both films solutions showed a viscoelastic behavior in the frequency spectrum, being the elastic modulus greater in F-1.0 G film than F-1.5 G film at low frequency. F-1.0 G film was less firm, deformable and elastic, with a less compact structure and a rougher surface as confirmed by AFM, favoring a higher water vapor permeability with respect to F.1.5 G film. Microorganisms such as Enterobacteria and Staphylococcus aureus were not found in the films after a period of storage (1 year under ambient conditions). The F-1.0 G film with added spices (cumin, oregano, garlic, onion, pepper, and nutmeg) was tested for some food applications: as a snack (with or without heat treatment) and as a wrap for grilled chicken. The performance of the seasoned film during chilled storage of chicken breast was also studied. Sensory evaluation showed good overall acceptability of all applications. In addition, the chicken breast wrapped with the seasoned film registered lower counts (1-log cycle) than the control (covered with a polystyrene bag) and the film without spices. Green banana flour is a promising material to develop edible films for food applications., The authors are grateful to Dirección de Investigación y Desarrollo (DIDE) and the Universidad Técnica de Ambato-Ecuador for support through the project’s financial approval by resolution 1313-CU-P-2015, Project PFCIAL17 “Development of active biodegradable films from rejection banana flour (Musa genus) and its application” and Ministerio de Economía y Competitividad (Spain) through projects AGL2017-84161-C2-1-R and PID2019-108361RB-I00 cofounded with ERDF (European Regional Development Fund)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nuevas tendencias en la producción y consumo alimentario

  • Martínez Álvarez, Óscar
  • Iriondo-DeHond, Amaia
  • Gómez Estaca, Joaquín
  • Castillo, M. Dolores del
Los autores del artículo señalan que la sostenibilidad y la alimentación saludable son los ejes en torno a los cuales girará el consumo de alimentos en las próximas décadas, y que, para ello, se debe impulsar una producción más eficiente en la que se utilicen menos recursos y se desarrollen procesos de menor impacto medioambiental. Asimismo, señalan la necesidad de aprovechar los subproductos y desechos y desarrollar sistemas de envasado más sostenible, en línea con la economía circular. Finalmente, plantean la conveniencia de cambiar los hábitos de consumo y de trabajar en pro de una mayor integración de la cadena alimentaria. Para todo ello, consideran fundamentales la nutrición de precisión, el desarrollo de alimentos dirigidos a poblaciones con necesidades especiales, la biotecnología, el manejo del Big Data y el apoyo de la inteligencia artificial., Los conocimientos que se aportan en este trabajo son fruto de la experiencia acumulada por los autores del mismo y derivada del desarrollo de los siguientes proyectos de investigación en fase de ejecución: “Utilización de nanoestructuras obtenidas a partir de desechos como estrategia de mejora de matrices biopoliméricas aplicadas al envasado activo y biodegradable de miosistemas” (PID2019-108361RB-I00) y “Nuevas bebidas de subproductos de café para una óptima salud del eje cerebro-intestinal” (COFFEE4BGA, PID2019-111510RB-I00), financiados ambos por el Ministerio de Ciencia e Innovación; “Unlocking novel product possibilities and barriers for commercial utilization of whitefish residual raw materials onboard factory trawler” (WHITEFISH), financiado por el Gobierno de Noruega., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Evaluación de la funcionalidad de ligninas obtenidas a partir de subproductos del café para la producción de nanopartículas y su aplicación al desarrollo de envases sostenibles

  • Olaran Mateos, Paula Casilda
[ES] Debido a la creciente preocupación por la sostenibilidad, cada vez son más numerosas las prácticas relacionadas con la reducción del uso de recursos no renovables y la revalorización de residuos agroalimentarios. La industria del café genera ingentes cantidades de residuos que pueden utilizarse para obtener compuestos con un valor añadido. La presente investigación se centra en la valorización de subproductos (pergamino y piel de plata), obtenidos en la producción del grano de café, para obtener lignina, evaluando su funcionalidad para la elaboración de nanopartículas y su incorporación en materiales de envasado activo sostenibles. Mediante el uso de los disolventes eutécticos profundos naturales compuestos de ácido acético o ácido láctico con cloruro de colina, se puso a punto un método con el que se consiguió extraer alrededor del 50% de la lignina total. La lignina obtenida de pergamino utilizando ácido acético y cloruro de colina fue la que mostró una mejor funcionalidad para la producción de nanopartículas, considerando el rendimiento, morfología, tamaño, potencial Z y estabilidad. Se formularon películas de gelatina incorporadas con nanopartículas estudiando el efecto del tipo y concentración de nanopartículas (producidas a partir de subproducto de café o de lignina comercial; 1-2%) o de la presencia y concentración de cinamaldehído (0.5-2%), añadido como antimicrobiano de origen natural. Los materiales desarrollados mostraron propiedades mecánicas (tensión máxima y módulo de elasticidad), de barrera al agua y a la luz UV, capacidad antioxidante y antimicrobiana (frente a E. coli K12) mejores que las de las películas control elaboradas sólo con gelatina, con un mínimo compromiso de otras propiedades como la transparencia o la extensibilidad, resultando prometedoras para el envasado de alimentos., [EN] Due to the growing concern for sustainability, practices related to the reduction of the use of non-renewable resources and the revalorization of agri-food waste are becoming more and more common. The coffee industry generates huge amounts of waste that can be used to obtain value-added compounds. The present research focuses on the valorization of by-products (parchment and silver skin), obtained from coffee bean production, to obtain lignin, evaluating its functionality for the elaboration of nanoparticles and their incorporation in sustainable active packaging materials. Using natural deep eutectic solvents composed of acetic acid or lactic acid with choline chloride, a method was developed with which it was possible to extract about 50% of the total lignin. Lignin obtained from parchment using acetic acid and choline chloride showed the best functionality for nanoparticle production, considering yield, morphology, size, Z-potential and stability. Gelatin films incorporated with nanoparticles were formulated by studying the effect of the type and concentration of nanoparticles (produced from coffee by-product or commercial lignin; 1-2%) or the presence and concentration of cinnamaldehyde (0.5-2%), added as a naturally occurring antimicrobial. The materials developed showed better mechanical properties (maximum tension and modulus of elasticity), barrier to water and UV light, antioxidant and antimicrobial capacity (against E. coli K12) than those of control films made only with gelatin, with a minimum compromise of other properties such as transparency or extensibility, resulting promising for food packaging., Este Trabajo Fin de Máster ha sido realizado bajo la financiación del siguiente proyecto: PID2019-108361RB-I00: Utilización de nanoestructuras obtenidas a partir de desechos como estrategia de mejora de matrices biopoliméricas aplicadas al envasado activo y biodegradable de miosistemas. Entidad financiadora: Ministerio de Ciencia e Innovación., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of glucose-crosslinked gelatin films reinforced with chitin nanowhiskers for active packaging development

  • Etxabide, Alaitz
  • Kilmartin, Paul A.
  • Maté, Juan I.
  • Gómez Estaca, Joaquín
To find renewable and sustainable alternatives to reduce the severe environmental impact of single-use synthetic plastic packaging, glucose-crosslinked gelatin films containing different amounts of chitin nanowhiskers (CNWs) were prepared. CNWs were first prepared by acid hydrolysis of chitin from shrimps, and characterized (morphological and thermal properties), before their addition into film-forming formulations. The films were heat-treated to promote the chemical crosslinking Maillard reaction (MR), between glucose and gelatin. The films then became less soluble (from 100% to ∼10%), thermally more stable, had a notably improved UV–vis light absorption capacity, and presented significantly enhanced tensile strength (from 42 to 77 MPa) and Young's modulus (from 1476 to 2921 MPa), however, they also became less flexible (from 17% to 7%) and transparent. These property alterations were mainly related to changes in crystallinity, the MR and to a lesser extent, to the formation of noncovalent (electrostatic and hydrogen bonding) interactions between CNWs and gelatin. Furthermore, due to the formation of MR products, the films turned yellow/dark brown and released antioxidant compounds (inhibition ∼33%) while immersed in water, which gave the films their active properties (stabilization of free radicals). These films have considerable potential as reinforced active packaging films for renewable food packaging applications., The authors would like to thank the Ministry of Business, Innovation and Employment of New Zealand (MBIE, Biocide Toolbox programme) and the Spanish Ministry of Science and Innovation (projects PID2019-108361RB-I00 and AGL2017-84161-C2-1-R) for funding. A.E. thanks the State Research Agency of Spain within the Juan de la Cierva - Incorporation action (IJC2019-039697I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural, viscoelastic, and emulsifying properties of shrimp chitin nanowhisker dispersions as a function of acidic pHs

  • Gómez Estaca, Joaquín
  • Tovar, Clara A.
  • Montero García, Pilar
  • Gómez Guillén, M. C.
Ultrastructural, hydrodynamic, rheological, and emulsifying properties of chitin nanowhisker dispersions from commercial (C) and laboratory (L) origin were analyzed at pHs 2–3.5. Nanowhiskers were rod-like shaped and their hydrodynamic properties changed in range: particle size: 90–560 nm; ζ potential: 26–42 mV; polydispersity 0.175–0.850. Flow curves indicated a shear-thinning behavior for both samples. At pH 2 dispersions were more consistent than at pH 3.5, but in both cases L showed higher consistency than C. Both C and L exhibited a non-stationary (thixotropic) flow at pH ≥ 2.5. The coexistence of two shear-induced domains was found in the oscillatory tests. The emulsifying ability of both C and L samples at a low (0.5%) concentration was dependent on pH. So, at pH 2, the L sample showed a greater emulsifying ability (98%) and emulsion stability (92-90%) than the C sample (emulsion stability ≈74%)., This work was supported by the following projects: NANOALIVAL AGL2017-84161 funded by MCIN/AEI/10.13039/501100011033/and FEDER “Una manera de hacer Europa”; NANOBIOPACK PID2019-108361RB-I0 funded by MCIN/AEI/10.13039/501100011033; and project 202070E218 financed by CSIC, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Agro-industrial protein waste and co-products valorization for the development of bioplastics: Thermoprocessing and characterization of feather keratin/gliadin blends

  • López de Dicastillo, Carol
  • Gómez Estaca, Joaquín
  • López-Carballo, Gracia
  • Gavara, Rafael
  • Hernández Muñoz, Pilar
This article belongs to the Special Issue Advanced Materials, Technologies, and Innovations in Food Packaging towards Sustainability., Biopolymers based on plant and animal proteins are interesting alternatives in the development of films with future prospects as food packaging. Considering that in recent years there has been an increasing interest in the valorization of agro-industrial residues and by-products and that the blending of polymers can lead to materials with improved properties, in this work, keratin-rich feather fibers and gliadins were blended at different ratios in order to develop sustainable and biodegradable films. Control gliadin G100, feather F100 films, and their blends at 3:1 (G75F25), 2:2 (G50F50), and 1:3 (G25F75) ratios were successfully developed through thermoprocessing. The physical properties were differentiated as a function of the concentration of both polymeric matrices. Although gliadins showed higher hydrophilicity as confirmed by their highest swelling degree, films with high gliadin ratios exhibited lower water vapor permeability values at low and medium relative humidities. On the other hand, the feather fiber-based films displayed the highest Young’s modulus values and provided an oxygen barrier to the blends, principally at the highest relative humidity. In conclusion, the blend of these protein-based polymers at different ratio resulted in interesting composites whose physical properties could be adjusted., This research was funded by the “Ramon & Cajal” Fellowship RYC2020-029874-I funded by MCIN/AEI/10.13039/501100011033 and the “European Union NextGenerationEU/PRTR” and by PID2021-123077OB-I00 and PID2019-108361RB-I00 projects funded both by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de bandejas tipo espuma a partir de almidón y desechos agroalimentarios para el envasado de alimentos

  • Benlarbi Delai Diaz, Omar
  • Castillo, M. Dolores del
  • Gómez Estaca, Joaquín
Trabajo presentado a las XXVII Jornadas Internacionales de Nutrición Práctica y el XVI Congreso Internacional de la Sociedad Española de Dietética y Ciencias de la Alimentación, celebrados en Madrid del 15 al 16 de marzo de 2023., Este trabajo se ha realizado a través de los proyectos NANOBIOPACK (PID2019-108361RB-I0 y Coffee4BGA (PID2019-11510RB100) financiados por MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Evaluación de la funcionalidad de biopolímeros y extractos de origen vegetal para la elaboración de almohadillas absorbentes antimicrobianas y biodegradables

  • Mojío, Daniel
  • Calvo, Marta M.
  • Gómez Estaca, Joaquín
Trabajo presentado a las XXVII Jornadas Internacionales de Nutrición Práctica y el XVI Congreso Internacional de la Sociedad Española de Dietética y Ciencias de la Alimentación, celebrados en Madrid del 15 al 16 de marzo de 2023., Este trabajo se ha realizado a través de los proyectos NANOBIOPACK (PID2019-108361RB-I0 y Coffee4BGA (PID2019-11510RB100) financiados por MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chitin nanowhisker-containing photo-crosslinked antimicrobial gelatin films

  • Etxabide, Alaitz
  • Mojío, Daniel
  • Guerrero, Pedro
  • Caba, Koro de la
  • Gómez Estaca, Joaquín
Nearly 57 Mt of food waste are generated annually in the EU for many reasons, for instance, because of microbial food spoilage. So, actions to reduce food loss and waste are needed and active packaging could offer a new approach towards this aim. In this study, antimicrobial gelatin films were prepared via the solution casting technique and their physicochemical, optical, mechanical, structural, barrier and antimicrobial properties were analysed. First, gelatin films were photo-crosslinked with riboflavin and the photo-curation time (0–4 h) was optimized. The optimal crosslinking time was 2 h since the solubility dropped down from 100% to 30% after 2 or 4 h of UV exposure. Then, 2 types of chitin nanowhiskers (CNWs) obtained via acid hydrolysis (AH) and TEMPO-mediated oxidation processes were added in 2 concentrations (2 and 4 wt %) into the film-forming solution (FFS) as reinforcements before film photo-crosslinking. The AH-CNW at 4 wt % was chosen as an optimal CNW type and concentration because they further decreased the solubility (∼24%) of films and improved mechanical properties up to values similar to those of commercially available synthetic packaging films. Finally, various concentrations (0, 7.5, 15 and 30 wt %) of the antimicrobial compound (Nisin A®) were added to the optimized formulation which showed good antimicrobial properties on both spoilage and pathogen strains, as well as over the native microbiota of chilled sea bream fillets, sliced cold-smoked salmon and chicken breast fillets. The developed films displayed promising properties as antimicrobial packaging for myosistem foods., The authors would like to thank the Spanish Ministry of Science and Innovation (projects PID2019-108361RB-I00 and AGL2017-84161-C2-1-R) for funding. A.E. thanks the State Research Agency of Spain within the Juan de la Cierva - Incorporation action (IJC2019-039697I). The authors also thank the Basque Government for funding through the research groups of the Basque University System (IT1658-22) and the Consejo Superior de Investigaciones Científicas-CSIC (project 245025)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modifying the technological properties and the release of cocoa compounds of active gliadin films by increasing the temperature of processing

  • López de Dicastillo, Carol
  • Esteve, Patricia
  • Rojas, Adrián
  • Gómez Estaca, Joaquín
  • Gavara, Rafael
  • Hernández Muñoz, Pilar
The search for bio-based polymers from renewable sources and compostable nature is undoubtedly a focus of interest and need in the area of plastics and mainly for food packaging. Gliadins, proteins found in wheat gluten, are an interesting and sustainable alternative because they are biodegradable, come from a renewable source and have interesting properties as gas barrier, although some technological properties need to be improved in order to broaden their applications. In this work, gliadin bioresin films were processed with water- and lipid-soluble cocoa extracts at 5 and 10 % respect polymer weight by thermo-compression at 90 and 130 °C in order to study both the effect of the type of extract, their concentrations and the processing temperature on the physical and functional properties of the active systems. Undoubtedly, the main condition that positively affected the properties of the resulting active films was the thermo-compression at 130 °C, since it allowed a better miscibility between the active compounds and the biopolymeric chains of the gliadins, and produced a certain crosslinking between disulphide/sulfhydryl groups and polyphenol-protein bonds that resulted in their water resistance. The reduction of weight loss in water achieved values up to 60 %, while in ethanol 95 %, the improvement in resistance was not significant. The mechanical properties of active gliadin films were also highly affected principally when processed at 130 ºC; the elastic modulus decreased while the elongation at break values increased up to values between 113 % and 150 %. The water vapor permeability was greatly reduced from 4.22 to 2.4 × 1014 Kg m/m2 s Pa for active gliadin film containing 10 % lipid soluble cocoa extract. The release of cocoa compounds was totally dependent on the type of the extract and the food simulant. The general conclusion was that by modifying the active compounds and the processing temperature, gliadin films with different technological and antioxidant properties were achieved., The authors acknowledge the award of the Spanish government MCIU/AEI to the IATA-CSIC as Center of Excellence Accreditation Severo Ochoa (CEX2021- 001189- S/ MCIU/AEI /10.13039/501100011033 and Carol López de Dicastillo thanks the “Ramon & Cajal” Fellowship RYC2020-029874-I funded by MCIN/AEI/ 10.13039/501100011033 and by “European Union NextGenerationEU/PRTR”. This work was supported by project PID2019-108361RB-I0 funded by MCIN/AEI/10.13039/501100011033 and Project 202270I148 funded by CSIC., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Characterization of glucose-crosslinked gelatin films reinforced with chitin nanowhiskers for active packaging development

  • Etxabide Etxeberria, Alaitz
  • Kilmartin, Paul A.
  • Maté Caballero, Juan Ignacio
  • Gómez-Estaca, Joaquín
To find renewable and sustainable alternatives to reduce the severe environmental impact of single-use synthetic plastic packaging, glucose-crosslinked gelatin films containing different amounts of chitin nanowhiskers (CNWs) were prepared. CNWs were first prepared by acid hydrolysis of chitin from shrimps, and characterized (morphological and thermal properties), before their addition into film-forming formulations. The films were heat-treated to promote the chemical crosslinking Maillard reaction (MR), between glucose and gelatin. The films then became less soluble (from 100% to ∼10%), thermally more stable, had a notably improved UV–vis light absorption capacity, and presented significantly enhanced tensile strength (from 42 to 77 MPa) and Young's modulus (from 1476 to 2921 MPa), however, they also became less flexible (from 17% to 7%) and transparent. These property alterations were mainly related to changes in crystallinity, the MR and to a lesser extent, to the formation of noncovalent (electrostatic and hydrogen bonding) interactions between CNWs and gelatin. Furthermore, due to the formation of MR products, the films turned yellow/dark brown and released antioxidant compounds (inhibition ∼33%) while immersed in water, which gave the films their active properties (stabilization of free radicals). These films have considerable potential as reinforced active packaging films for renewable food packaging applications., The authors would like to thank the Ministry of Business, Innovation and Employment of New Zealand (MBIE, Biocide Toolbox programme) and the Spanish Ministry of Science and Innovation (projects PID2019-108361RB-I00 and AGL2017-84161-C2-1-R) for funding. A.E. thanks the State Research Agency of Spain within the Juan de la Cierva - Incorporation action (IJC2019-039697I).