Pasar al contenido principal

IMPLANTES DE BASE TITANIO CON RIGIDEZ ADAPTADA, SUPERFICIE BIOFUNCIONALIZADA Y POROS RELLENOS CON POLIMEROS BIODEGRADABLES, ANTIBACTERIANOS Y POTENCIAL ACTIVIDAD TERAPEUTICA

PID2019-109371GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Influence of Femtosecond Laser Modification on Biomechanical and Biofunctional Behavior of Porous Titanium Substrates

  • Beltrán, Ana M.
  • Giner, Mercè
  • Rodríguez, Ángel
  • Trueba Muñoz, Paloma
  • Rodríguez-Albelo, Luisa Marleny
  • Vázquez-Gámez, MA
  • Godinho, Vanda
  • Alcudia, Ana
  • Amado, José
  • López-Santos, Carmen
  • Torres, Yadir
[Abstract] Bone resorption and inadequate osseointegration are considered the main problems of titanium implants. In this investigation, the texture and surface roughness of porous titanium samples obtained by the space holder technique were modified with a femtosecond Yb-doped fiber laser. Different percentages of porosity (30, 40, 50, and 60 vol.%) and particle range size (100–200 and 355–500 μm) were compared with fully-dense samples obtained by conventional powder metallurgy. After femtosecond laser treatment the formation of a rough surface with micro-columns and micro-holes occurred for all the studied substrates. The surface was covered by ripples over the micro-metric structures. This work evaluates both the influence of the macro-pores inherent to the spacer particles, as well as the micro-columns and the texture generated with the laser, on the wettability of the surface, the cell behavior (adhesion and proliferation of osteoblasts), micro-hardness (instrumented micro-indentation test, P–h curves) and scratch resistance. The titanium sample with 30 vol.% and a pore range size of 100–200 μm was the best candidate for the replacement of small damaged cortical bone tissues, based on its better biomechanical (stiffness and yield strength) and biofunctional balance (bone in-growth and in vitro osseointegration)., This research was funded by the Ministerio de Ciencia e Innovación del Gobierno de España (PID2019-109371GB-100), Junta de Andalucía (Spain), through the Project PAIDI P20-00671, Junta de Andalucía; P20-00671
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Tribo-Mechanical and Cellular Behavior of Superficially Modified Porous Titanium Samples Using Femtosecond Laser

  • Trueba Muñoz, Paloma
  • Giner, Mercè
  • Rodríguez Carballo, Ángel
  • Beltrán, Ana M.
  • Amado, José
  • Montoya-García, María José
  • Rodríguez-Albelo, Luisa Marleny
  • Torres, Yadir
[Abstract] In this work, the surface of porous titanium samples obtained by the space-holder technique was treated with a femtosecond laser to improve their osseointegration. Instrumented micro-indentation and scratch test were implemented to evaluate the tribo-mechanical behavior of the surface of the modified samples. A detailed study of micro-hardness, stiffness, scratch resistance and elastic recovery was performed. Also, in vitro analysis was carried out to evaluate the cellular behavior. Modified samples showed less ALP activity, which could indicate a greater differentiation of the cells. The cell culture was similar in all cases although more differentiated morphology, good cell adherence and biological response were observed on treated samples. Finally, the discs with a pore size between 100–200 μm present being potential candidates for the replacement of small portions of damaged cortical bone tissues., This work was supported by the Ministry of Science and Innovation of Spain under the grant PID2019-109371GB-I00, by the Junta de Andalucía–FEDER (Spain) through the Project Ref. US-1259771, Junta de Andalucía; US-1259771
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Relation between chemical composition, morphology, and microstructure of poly(ether ether ketone)/reduced graphene oxide nanocomposite coatings obtained by electrophoretic deposition

  • González-Castillo, Eduin I.
  • Žitnan, M.
  • Torres, Yadir
  • Shuttleworth, Peter S.
  • Galusek, Dušan
  • Ellis, Gary James
  • Boccaccini, A. R.
The effect of the chemical composition on the morphology and microstructure of poly(ether ether ketone) (PEEK)/reduced graphene oxide (RGO) nanocomposite coatings is analyzed. RGO induced three main morphological features in the nanocomposites: (i) a large-scale co-continuous morphology related to nanosheets whose basal planes were mainly aligned with the coating surface, (ii) a dendritic morphology of PEEK domains, and (iii) irregular domains related to the deposition of PEEK particles wrapped by the nanosheets. The development of these morphological features was influenced by the RGO content, allowing the modification of the surface roughness. RGO also induced changes in the melting and non-isothermal crystallization of the polymeric matrix and promoted transcrystallinity in PEEK that, in turn, was a key factor in the development of the final microstructure. In addition, polymer chain mobility was observed to be hindered at high nanofiller concentrations, increasing the glass transition temperature, and diminishing the recrystallization of the polymeric matrix., Eduin I. González-Castillo gratefully acknowledges the National Council of Science and Technology (CONACYT, Mexico) for the postdoctoral scholarship (Reference: 239274) to carry out his project. Partial funding from the project FunGlass is acknowledged (European Unions Horizon 2020 research and inno- vation program under grant agreement No 739566). Yadir Torres expresses his gratitude to the Ministry of Science and Innovation of Spain (grant PID2019- 109371GB-I00). Peter S. Shuttleworth and Gary Ellis gratefully acknowledges the ‘‘Ministerio de Ciencia e Innovación’’ of Spain (Grant: PID2020- 117573GB-I00) funded by MCIN/AEI/10.13039/ 501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. Michal Zˇ itnˇ an thanks the Centre for Functional and Surface Functionalized Glass (CEGLASS) (ITMS code is 313011R453) opera- tional program Research and Innovation, co-funded by European Regional Development Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antimicrobial and Antibiofilm Effect of 4,4'-Dihydroxy-azobenzene against Clinically Resistant Staphylococci

  • Pérez-Aranda, María
  • Pajuelo, Eloísa
  • Navarro-Torre, Salvadora
  • Pérez-Palacios, Patricia
  • Begines, Belén
  • Rodríguez-Llorente, Ignacio D.
  • Torres, Yadir
  • Alcudia, Ana
The spread of antibiotic resistance among human and animal pathogens is one of the more significant public health concerns. Moreover, the restrictions on the use of particular antibiotics can limit the options for the treatment of infections in veterinary clinical practice. In this context, searching for alternative antimicrobial substances is crucial nowadays. In this study, 4,4'-dihydroxy-azobenzene (DHAB) was tested for its potential in vitro as an antimicrobial agent against two relevant human and animal pathogens, namely Staphylococcus aureus and Staphylococcus pseudintermedius. The values of minimal inhibitory concentration (MIC) were 64 and 32 mg/L respectively, and they comparable to other azo compounds of probed antimicrobial activity. In addition, the minimal bactericidal concentrations (MCB) were 256 and 64 mg/L. The mechanism by which DHAB produces toxicity in staphylococci has been investigated. DHAB caused membrane damage as revealed by the increase in thiobarbituric acid reactive substances (TBARS) such as malondialdehyde. Furthermore, differential induction of the enzymes peroxidases and superoxide dismutase in S. aureus and S. pseudintermedius suggested their prevalent role in ROS-scavenging due to the oxidative burst induced by this compound in either species. In addition, this substance was able to inhibit the formation of biofilms by both bacteria as observed by colorimetric tests and scanning electron microscopy. In order to assess the relevance of DHAB against clinical strains of MRSA, 10 clinical isolates resistant to either methicillin or daptomycin were assayed; 80% of them gave values of CMI and CMB similar to those of the control S. aureus strain. Finally, cutaneous plasters containing a composite formed by an agar base supplemented with DHAB were designed. These plasters were able to inhibit in vitro the growth of S. aureus and S. pseudintermedius, particularly the later, and this suggests that this substance could be a promising candidate as an alternative to antibiotics in the treatment of animal skin infections, as it has been proven that the toxicity of this substance is very low particularly at a dermal level., This study was financed by Project PID2019-109371GB-I00 (Ministerio de Ciencia e Innovación, Spain), Project FEDER US-1380878 (Junta de Andalucía), Ayudas PAIDI BIO-181/2019/2021, and VII Plan Propio de Investigación Universidad de Sevilla., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal and tribo-mechanical properties of high-performance poly(etheretherketone)/reduced graphene oxide nanocomposite coatings prepared by electrophoretic deposition

  • González-Castillo, Eduin I.
  • Torres, Yadir
  • González, Francisco J.
  • Aguilar-Rabiela, Arturo E.
  • Shuttleworth, Peter S.
  • Ellis, Gary James
  • Boccaccini, Aldo R.
The thermal stability and degradation, near-to-surface mechanical properties, and scratch resistance and damage mechanism of poly(etheretherketone) (PEEK)/reduced graphene oxide (RGO) nanocomposite coatings are analyzed and discussed in terms of their nanosheet content and microstructure. Although RGO modified the thermal stability and degradation of the polymeric matrix, for instance, by slightly reducing the onset degradation temperature, its addition was not a limiting factor in the PEEK processing. Respecting the microstructural features induced by the nanosheets, the nanocomposite coatings were found to exhibit (i) a partially exfoliated and large-scale co-continuous morphology related to RGO nanosheets whose basal planes were mainly aligned with the coating surface, (ii) a dendritic morphology of PEEK domains related to transcrystallinity, (iii) and irregular domains associated with the deposition of PEEK particles wrapped by the nanosheets. The changes provoked by RGO in the morphology and PEEK crystalline phase influenced the near-to-surface mechanical properties, scratch resistance, and scratch damage mechanism of the nanocomposite coatings. Within this context, the interlayer strength between the nanosheets in the large-scale co-continuous morphology and PEEK transcrystallinity had an important effect. Furthermore, the random-bumpy surface texture formed by the irregular PEEK domains together with the conformal cracking damage mechanism was decisive in the scratch response of the PEEK/RGO nanocomposite coatings. The comprehensive characterization carried out in this work concludes that PEEK/RGO electrophoretic coatings are suitable for a variety of applications requiring tribo-mechanical resistance. Graphical Abstract: [Figure not available: see fulltext.], Eduin I. Gonza´lez-Castillo gratefully acknowledges the National Council of Science and Technology CONACYT, Mexico) for the postdoctoral scholarship (Reference: 239274) to conduct his project. Yadir Torres expresses his gratitude to the Ministry of Science and Innovation of Spain (grant PID2019-109371GB-I00). Arturo E. Aguilar-Rabiela acknowledges the Deutscher Akademischer Austauschdienst (DAAD) for the funding (Ref. No. 91801820). Peter S. Shuttleworth and Gary Ellis gratefully acknowledge the Ministry of Science and Innovation of Spain (Grant: PID2020-117573GB-I00) funded by MCIN/ AEI/.13039/501100011033 and by the ‘‘European Union Next Generation EU/PRTR.’’ We thank Prof. Milo Shaffer (Imperial College London, UK) for fruitful discussions at the start of this project. Open access funding provided by The Ministry of Education, Science, Research and Sport of the Slovak Republic in cooperation with Centre for Scientific and Technical Information of the Slovak Republic., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical impedance of surface modified porous titanium implants with femtosecond laser

  • Navarro, Paula
  • Olmo, Alberto
  • Giner, Mercè
  • Rodríguez-Albelo, Marleny
  • Rodíguez-Vázquez, Ángel
  • Torres, Yadir
This article belongs to the Topic Scientific Advances in STEM: Synergies to Achieve Success, 2nd Volume., The chemical composition and surface topography of titanium implants are essential to improve implant osseointegration. The present work studies a non-invasive alternative of electrical impedance spectroscopy for the characterization of the macroporosity inherent to the manufacturing process and the effect of the surface treatment with femtosecond laser of titanium discs. Osteoblasts cell culture growths on the titanium surfaces of the laser-treated discs were also studied with this method. The measurements obtained showed that the femtosecond laser treatment of the samples and cell culture produced a significant increase (around 50%) in the absolute value of the electrical impedance module, which could be characterized in a wide range of frequencies (being more relevant at 500 MHz). Results have revealed the potential of this measurement technique, in terms of advantages, in comparison to tiresome and expensive techniques, allowing semi-quantitatively relating impedance measurements to porosity content, as well as detecting the effect of surface modification, generated by laser treatment and cell culture., This work was supported by the Ministry of Science and Innovation of Spain under the grant PID2019-109371GB-I00, by the Junta de Andalucía–FEDER (Spain) through the Project Ref. US-1259771 and by the Junta de Andalucía-Proyecto de Excelencia (Spain) P18-FR-2038., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of successive chemical and thermochemical treatments on surface features of Ti6Al4V samples manufactured by SLM

  • González, Jesús E.
  • de Armas, Gabriela
  • Negrin, Jeidy
  • Beltrán, Ana M.
  • Trueba, Paloma
  • Gotor, F.J.
  • Peón, Eduardo
  • Torres, Yadir
Ti6Al4V samples, obtained by selective laser melting (SLM), were subjected to successive treatments: acid etching, chemical oxidation in hydrogen peroxide solution and thermochemical processing. The effect of temperature and time of acid etching on the surface roughness, morphology, topography and chemical and phase composition after the thermochemical treatment was studied. The surfaces were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction and contact profilometry. The temperature used in the acid etching had a greater influence on the surface features of the samples than the time. Acid etching provided the original SLM surface with a new topography prior to oxidation and thermochemical treatments. A nanostructure was observed on the surfaces after the full process, both on their protrusions and pores previously formed during the acid etching. After the thermochemical treatment, the samples etched at 40◦C showed macrostructures with additional submicro and nanoscale topographies. When a temperature of 80◦C was used, the presence of micropores and a thicker anatase layer, detectable by X-ray diffraction, were also observed. These surfaces are expected to generate greater levels of bioactivity and high biomechanics fixation of implants as well as better resistance to fatigue., This work was supported by the Ministry of Science and Innovation of Spain under the grant PID2019-109371GB-I00, by the Junta de Andalucía–FEDER (Spain) through the Project Ref. US-1259771, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the Processing Parameters on the Porosity and Mechanical Behavior of Titanium Samples with Bimodal Microstructure Produced via Hot Pressing

  • Chávez-Vásconez, Ricardo
  • Lascano, Sheila
  • Sauceda, Sergio
  • Reyes-Valenzuela, Mauricio
  • Salvo, Christopher
  • Mangalaraja, Ramalinga Viswanathan
  • Gotor, F.J.
  • Arévalo, Cristina
  • Torres, Yadir
Commercially pure (c.p.) titanium grade IV with a bimodal microstructure is a promising material for biomedical implants. The influence of the processing parameters on the physical, microstructural, and mechanical properties was investigated. The bimodal microstructure was achieved from the blends of powder particles with different sizes, while the porous structure was obtained using the space-holder technique (50 vol.% of ammonium bicarbonate). Mechanically milled powders (10 and 20 h) were mixed in 50 wt.% or 75 wt.% with c.p. titanium. Four different mixtures of powders were precompacted via uniaxial cold pressing at 400 MPa. Then, the specimens were sintered at 750 °C via hot pressing in an argon gas atmosphere. The presence of a bimodal microstructure, comprised of small-grain regions separated by coarse-grain ones, was confirmed by optical and scanning electron microscopies. The samples with a bimodal microstructure exhibited an increase in the porosity compared with the commercially available pure Ti. In addition, the hardness was increased while the Young's modulus was decreased in the specimens with 75 wt.% of the milled powders (20 h)., This work was supported by the Agencia Nacional de Investigación y Desarrollo (ANID) of Chile government [grant number Fondecyt 11160865, and FONDEQUIP EQM130103 and EQM150101, and Scholarship Program/DOCTORADO/2021-21211274], and the Ministerio de Ciencia e Innovación of Spain under the grant PID2019-109371GB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Limits of powder metallurgy to fabricate porous Ti35Nb7Zr5Ta samples for cortical bone replacements

  • Rodriguez-Albelo, Luisa M.
  • Navarro, Paula
  • Gotor, F.J.
  • de la Rosa, Julio E.
  • Mena, Danaysi
  • García-García, Francisco J.
  • Beltrán, Ana M.
  • Alcudia, Ana
  • Torres, Yadir
The use of β-Titanium alloys to fabricate metal implants with Young's modulus that resembles bone tissues is presented as an alternative to commercially pure titanium or α-Titanium alloys, although it is still necessary to introduce proper implant porosity to reach the Young's modulus of cortical bones. In this work, porous samples were fabricated by loose sintering (0 MPa) and compared to samples manufactured at 1000 MPa, both sintered under the same conditions. Raw powders and sintered samples of the β-Titanium alloy, Ti35Nb7Zr5Ta, were characterized in detail in terms of both physicochemical and microstructural properties. Moreover, the tribo-mechanical behavior of sintered samples was evaluated by performing ultrasound technique, instrumented micro-indentation (P-h curves), and scratch tests. The bio-functional behavior was studied by impedance spectroscopy and contact angle measurements. The results allowed the evaluation of the limits of conventional powder metallurgy (percentage of porosity, size, and morphology of pores), as well as the influence of the porosity and chemical composition to achieve a better biomechanical and bio-functional behavior that would guarantee bone requirements. The Ti35Nb7Zr5Ta alloy showed relatively high electrical impedance values compared to commercially pure titanium, indicating an improved bio-corrosion behavior. Furthermore, wettability measurements indicated that porous disks fabricated by loose sintering exhibit higher hydrophilicity, often associated with a better antibacterial response., This publication is part of the R + D + i projects PID2019-109371GB-I00 financed by MCIN/AEI/10.13039/501100011033/ and Junta de Andalucía (PAIDI P20-00671), Peer reviewed