Pasar al contenido principal

INTERACCION VIA-ESTRUCTURA-SUELO Y EFECTOS DE AMORTIGUAMIENTO EN PUENTES DE FERROCARRIL. ANALISIS EXPERIMENTAL DE ESTRUCTURAS EXISTENTES Y DESARROLLO DE MODELOS AVANZADOS

PID2019-109622RB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT JAUME I DE CASTELLO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Analysis Of The Influence Of The Ballast Track In The Dynamic Behaviour Of Single-Track Railway Bridges Of Different Typologies

  • Chordà Monsonís, Josep
  • Martínez Rodrigo, Mª Dolores
  • Galvín Barrera, Pedro
  • Romero Ordóñez, Antonio
  • Moliner Cabedo, Emmanuela
[EN] Short-to-medium span simply-supported (SS) railway bridges are prone to experience high levels of vertical acceleration due to train passage. The necessity of predicting accurately their dynamic behaviour for design, safety and maintenance reasons, requires a deep understanding of the train induced vibrations in these structures. A key factor of this phenomenon is the influence exerted by the ballast track on their dynamic response. This paper provides a detailed sensitivity analysis over a single-track bridge catalogue covering lengths of interest from 10 to 25 m considering two different typologies, (i) girder-deck bridges and (ii) slab-deck bridges. The effect of the vertical flexibility of elastic bearings is also analysed. A 2D Finite-Element (FE) track-bridge interaction model is implemented with the aim to evaluate the influence of the track parameters on the modal properties of the bridges and the dynamic response under train passages. The results obtained reveal the influence of the ballast shear stiffness and damping in the dynamic behaviour of the structures, especially in the case of the shortest girder bridges., The authors would like to acknowledge the financial support provided by the Junta de Andalucía and the European Social Fund through the contract USE-20617-D with the Universidad de Sevilla, and also the Spanish Ministry of Science and Innovation under research project PID2019-109622RB and Generalitat Valenciana under research project AICO2019/175.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Influence of track modelling in modal parameters of railway bridges composed by single-track adjacent decks

  • Sánchez Quesada, Juan
  • Moliner, E.
  • Romero, A.
  • Galvín, P.
  • Martínez-Rodrigo, M.D.
[EN] A significant number of railway bridges composed by simply-supported (SS) spans are present in existing railway lines. Special attention must be paid to short to medium span length structures, as they are prone to experience high vertical acceleration levels at the deck, due to their low weight and damping, compromising the travelling comfort and the structural integrity. The accurate prediction of the dynamic response of these bridges is a complex issue since it is affected by uncertain factors such as structural damping and complex interaction mechanisms such as vehicle-bridge, soil-structure or track-bridge interaction. Concerning track-bridge interaction, experimental evidences of a dynamic coupling exerted by the ballasted track between subsequent SS spans and also between structurally independent single-track twin adjacent decks have been reported in the literature [1, 2]. Nevertheless, this phenomenon is frequently disregarded due to the computational cost of models including the track and due to the uncertainties in the mechanical parameters that define the track system. The present work contributes to the study of the coupling effect exerted by the ballasted track between independent structures in railway bridges. With this purpose two 3D finite element (FE) track-bridge interaction models are implemented. The former includes a continuous representation of the track components meshing the sleepers, ballast and sub-ballast with solid FE. In the latter, the track is represented as a 2D discrete three-layer model where the mass, stiffness and damping of the components are concentrated at the sleepers locations. The numerical models are updated with experimental measurements performed on an existing railway bridge in a view to evaluate (i) the influence of the track continuity on the bridge modal parameters and on the train-induced vibrations; (ii) the adequacy of the implemented numerical models and (iii) the importance of the track-bridge interaction for an accurate prediction of the vertical acceleration levels under operating conditions., The authors would like to acknowledge the financial support provided by the Spanish Ministry of Science and Innovation under research project PID2019-109622RB; FEDER Andalucía 2014-2020 Operational Program for project US-126491; Generalitat Valenciana and Universitat Jaume I under research projects AICO2019/175 and UJI/A2008/06; and the Andalusian Scientific Computing Centre (CICA).