Pasar al contenido principal

EMISIONES NON-EXHAUST POR TRAFICO RODADO: DESARROLLO DE MEDIDAS BASADAS EN EL IMPACTO EN CALIDAD DEL AIRE, SALUD E IMPLICACIONES DE LA PENETRACION DE VEHICULOS ELECTRICOS

PID2019-110623RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PM<inf>10</inf> Resuspension of Road Dust in Different Types of Parking Lots: Emissions, Chemical Characterisation and Ecotoxicity

  • Casotti Rienda, Ismael
  • Alves, Célia A.
  • Nunes, Teresa
  • Soares, Marlene
  • Amato, Fulvio
  • Sánchez de la Campa, Ana
  • Kováts, Nóra
  • Hubai, Katalin
  • Teke, Gábor
The thoracic fraction of road dust (PM10) was measured for the first time in Portugal in parking areas, both outdoors and indoors, with the aim of completing existing studies carried out in active lanes of various roads. An in situ resuspension chamber was used to collect a total of 23 samples in three parking areas of Aveiro, whilst the laboratory procedures included determination of carbonaceous content (OC and EC) by a thermo-optical technique, elemental composition by ICP-MS and ICP-OES after acid digestion, and the Aliivribrio fisherii bioluminescent bacteria ecotoxicity bioassay. Dust loadings (DL10) obtained were 18.5 ± 9.8 mg PM10 m−2, in outdoor parking, and 1.8–23.7 mg PM10 m−2 for indoor parking, corresponding to emission factors of 476 and 75–589 mg veh−1 km−1, respectively. OC represented 9–30 % of PM10 for the indoor parking areas. However, for the outdoor samples, the high iron oxide content jeopardised the OC-EC separation. In those samples, carbonates accounted for 10.0 ± 3.3% of the PM10 mass. The analysis of elemental components focused on major elements (Al, Ca, Fe, K, and Mg) as well as minor elements. The total mass fraction of element oxides accounted for 27.1% (outdoor) and 23.6–34.3% (indoor). ΣPAH calculated for all parking areas accounted for 8.38–36.9 μg g−1 PM10. The ecotoxicological bioassay showed that all aqueous solutions were toxic to bioluminescent bacteria, whereas no clear correlations could be made with specific component groups, with the exception of ΣPAH and EC50., This research was funded by FEDER, through COMPETE2020–Programa Operacional Competitividade e Internacionalização (POCI), and by national funds (OE), through FCT/MCTES, through the implementation of the project “Big data to improve atmospheric emission inventories (BigAir)”, PTDC/EAM-AMB/2606/2020. Furthermore, the authors also acknowledge the financial support to CESAM (UIDB/50017/2020+UIDP/50017/2020+LA/P/0094/2020), to FCT/MCTES through national funds, and the co-funding by the FEDER, within the PT2020 Partnership Agreement and COMPETE2020. Ismael Casotti Rienda is grateful to the Portuguese Foundation of Science and Technology (FCT) for funding the scholarship SFRH/BD/144550/2019. The research work was also supported by the LIFE-REMY (LIFE20 PRE/IT/000004) and the Spanish National Research Project NEXT (PID2019-110623RB-I00), funded by MCIN/AEI/10.13039/501100011033/., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Road dust resuspension in a coastal Atlantic intermunicipal urban area with industrial facilities: Emission factors, chemical composition and ecotoxicity

  • Casotti Rienda, Ismael
  • Nunes, Teresa
  • Gonçalves, Cátia
  • Vicente, Ana
  • Amato, Fulvio
  • Lucarelli, Franco
  • Kováts, Nora
  • Hubai, Katalin
  • Sainnokhoi, Tsend Ayush
  • Alves, Célia A.
Road dust resuspension in urban environments can be both a means of transport of pollutants across the various environmental compartments and a source of pollutants itself, becoming a potential threat to human health. With the aim of obtaining emission factors and achieving a detailed chemical characterisation of road dust (RD) in typical Portuguese cities, a sampling campaign was performed in the region of Aveiro. Locations were chosen for intercomparison in various urban environments with different land uses, from the busier city centre and university campus to residential neighbourhoods and harbour-commercial areas with industrial activities. PM10 samples were analysed for organic and elemental carbon (OC and EC) by a thermal-optical technique, elemental composition by PIXE, organic speciation by GC–MS, and ecotoxicology by a luminescence inhibition bioassay with Aliivibrio fischeri. A health risk assessment for elements and PAHs was carried out. Dust loadings of 1.9 ± 1.8 mg PM10 m−2 were registered overall, whereas in the most trafficked areas of city centre they reached more than three times the average. OC accounted for 6.5–15.5% of total PM10, but element oxides represented the largest mass fraction (61.4 ± 8.6%). A strong enrichment was detected mostly for typical traffic-related elements such as Cu, Zn, As, Br, Cr, Ni and Mo and interestingly, Rb and Se. The analysed organic compounds accounted for 3.66–11.0 mg g−1 PM10, including PAHs and aliphatics, with a clear dominance of plasticisers. Some other compounds attributed to non-vehicle sources, such as fatty acid alkyl esters, were also detected. As concerns the 16 priority PAHs, their total mass concentration ranged from 5.58 to 36.3 μg g−1 PM10, with clear variability between sampling spots. All samples caused an ecotoxicological reaction in the bioassay, but samples from harbour and commercial areas proved to be most toxic., Ismael Casotti Rienda is grateful to the Portuguese Foundation of Science and Technology (FCT) for funding the scholarship SFRH/BD/144550/2019. Authors also acknowledge the financial support to CESAM (UIDB/50017/2020 + UIDP/50017/2020 + LA/P/0094/2020), to FCT/MCTES through national funds, and the co-funding by the FEDER, within the PT2020 Partnership Agreement and COMPETE2020. The sampling and analytical work were supported by the project “Big data to improve atmospheric emission inventories (BigAir)”, PTDC/EAM-AMB/2606/2020, funded by FEDER, through COMPETE2020 - Programa Operacional Competitividade e Internacionalização (POCI), and by national funds (OE), through FCT/MCTES. Many thanks are also due to the RADIATE Project (H2020, #824096). The research work was also supported by the European Union (EU)-funded project LIFE REMY (LIFE20 PRE/IT/000004) and the Spanish National research project NEXT (PID2019-110623RB-I00) funded by MCIN/AEI/10.13039/501100011033. Finally, we are grateful to the Municipality of Ílhavo and the other authorities for enabling the necessary contingencies for the accomplishment of the sampling tasks., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preliminary assessment of road dust from Portuguese motorways: chemical profile, health risks, and ecotoxicological screening

  • Casotti Rienda, Ismael
  • Nunes, Teresa
  • Amato, Fulvio
  • Lucarelli, Franco
  • Kováts, Nora
  • Hubai, Katalin
  • Alves, Célia A.
Among non-exhaust emissions, road dust resuspension represents a rather important contribution to particulate matter in urban areas. This study aimed to achieve a chemical characterisation of road dust particulate matter (PM10) on two motorway sections, one rural and one urban, and to explore the related health and ecotoxicological risks. Measured PM10 dust loadings reached very low levels (0.66–1.49 mg m-2) compared to equivalent studies in other road environments in Portugal and other countries. Emission factors ranged from 33 to 62 mg veh−1 km−1. The carbonaceous content represented 14% of the total PM10 mass, whereas the highest contribution to the mass was given by mineral matter. Elements such as Si, Al, Ca, Fe and K accounted for almost three quarters of the total element mass for all samples, whilst Cu and Zn, mostly associated with brake and tyre wear, were the most enriched elements in relation to the soil composition. Nonetheless, Ti and Zr presented the highest non-carcinogenic risks for human health. Despite the low amounts of particulate matter in the aqueous solution, the ecotoxicological screening with the Aliivibrio fisheri bioluminescence inhibition bioassay allowed to classify the samples as toxic., Open access funding provided by FCT|FCCN (b-on). This research was funded by FEDER, through COMPETE2020 - Programa Operacional Competitividade e Internacionalização (POCI), and by national funds (OE), through FCT/MCTES, through the implementation of the project “Big data to improve atmospheric emission inventories (BigAir)”, PTDC/EAM-AMB/2606/2020. Furthermore, authors also acknowledge the financial support to CESAM (UIDB/50017/2020+UIDP/50017/2020+LA/P/0094/2020), to FCT/MCTES through national funds, and the co-funding by the FEDER, within the PT2020 Partnership Agreement and COMPETE2020. Ismael Casotti Rienda is grateful to the Portuguese Foundation of Science and Technology (FCT) for funding the scholarship SFRH/BD/144550/2019. The research work was also supported by the LIFE-REMY (LIFE20 PRE/IT/000004) and the Spanish National research project NEXT (PID2019-110623RB-I00) funded by MCIN/AEI/10.13039/501100011033/., Peer reviewed