Pasar al contenido principal

IMAGEN FOTOACUSTICA CON NANOPARTICUTLAS CON PROPIEDADES OPTOELECTRONICAS Y MAGNETICAS

PID2019-111436RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Isolation and Quantification of miRNA from the Biomolecular Corona on Mesoporous Silica Nanoparticles

  • VIDAURRE-AGUT, CARLA
  • Rivero-Buceta, Eva María
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
  • Landry, Christopher C.
[EN] To understand the factors that control the formation of the biomolecular corona, a systematic study of the adsorption of several miRNAs shown to be important in prostate cancer on amine-functionalized mesoporous silica nanoparticles (MSN-NH2) has been performed. Process parameters including miRNA type, nanoparticle concentration, incubation temperature and incubation time were investigated, as well as the potential competition for adsorption between different miRNA molecules. The influence of proteins and particle PEGylation on miRNA adsorption were also explored. We found that low particle concentrations and physiological temperature both led to increased miRNA adsorption. Adsorption of miRNA was also higher when proteins were present in the same solution; reducing or preventing protein adsorption by PEGylating the MSNs hindered adsorption. Finally, the amount of miRNA adsorbed from human serum by MSN-NH2 was compared to a commercial miRNA purification kit (TaqMan(R), Life Technologies, Carlsbad, CA, USA). MSN-NH2 adsorbed six times as much miRNA as the commercial kit, demonstrating higher sensitivity to subtle up- and downregulation of circulating miRNA in the blood of patients., This research was funded by the Spanish Ministry of Economy and Competitiveness (project PID2019-111436RB-C21), and the Generalitat Valenciana (project PROMETEO/2017/060).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Fast 0.5 T Prepolarizer Module for Preclinical Magnetic Resonance Imaging

  • Rigla, J. P.
  • Gramage, Carlos
  • González-Hernández, José Manuel
  • Sanchez-Andres, Juan V.
  • Galve, Fernando
  • Grau-Ruiz, Daniel
  • Pellicer, Rubén
  • Rios, Alfonso
  • Alonso, Joseba
  • Borreguero-Morata, José
  • Pallás-Lodeiro, Eduardo
  • Bosch-Esteve, Rubén|||0000-0002-7316-7819
  • Algarín-Guisado, José Miguel|||0000-0003-2644-7225
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] We present a magnet and high power electronics for Prepolarized Magnetic Resonance Imaging (PMRI) in a home-made, special-purpose preclinical system designed for simultaneous visualization of hard and soft biological tissues. The sensitivity of MRI systems grows with field strength, but so do their costs. PMRI can boost the signal-to-noise ratio (SNR) in affordable low-field scanners by means of a long and strong magnetic pulse. However, this must be rapidly switched off prior to the imaging pulse sequence, in timescales shorter than the spin relaxation (or T1) time of the sample. We have operated our prepolarizer at up to 0.5 T and demonstrated enhanced magnetization, image SNR and tissue contrast with PMRI of tap water, an ex vivo mouse brain and food samples. These have T1 times ranging from hundreds of milli-seconds to single seconds, while the preliminary high-power electronics setup employed in this work can switch off the prepolarization field in tens of milli-seconds. In order to make this system suitable for solid-state matter and hard tissues, which feature T1 times as short as 10 ms, we are developing new electronics which can cut switching times to ~ 300 ¿s. This does not require changes in the prepolarizer module, opening the door to the first experimental demonstration of PMRI on hard biological tissues., This work was supported in part by the European Commission under Grant 737180 (FET-Open: HistoMRI), in part by the Ministerio de Ciencia e Innovación of Spain for Research under Grant PID2019-111436RB-C21, and in part by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014¿2020 under Grant IDIFEDER/2018/022. The work of José M. González was supported by the Innodocto Program of the Agencia Valenciana de la Innovación under Grant INNTA3/2020/22. The work of Juan V. Sanchez-Andres was supported by the Universitat Jaume I - Fundación para el Fomento de la Investigación Sanitaria y Biomédica de la Comunitat Valenciana (UJISABIO) under Grant 21I044.01/1
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical Drills by Dynamic High-Order Bessel Beam Mixing

  • Kontenis, Gabrielius
  • Gailevicius, Darius
  • Staliunas, Kestutis
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] One of the key trends in laser material processing is the usage of structured laser beams. Collimated and focused Gaussian beams are the most common tools; however, more exotic beams can be beneficial too. For instance, Bessel beams with elongated focal area and self-healing properties, or vortex beams with helical wave fronts and a dark area along the optical axis are being increasingly used. Here, we propose and experimentally demonstrate dynamical ¿optical drill¿ beams presenting nonstationary intensity distributions that resemble a spinning mechanical drill. Optical drills appear as the spatiotemporal interference of two Bessel-vortex beams of different topological charges and different carrier frequencies. By mixing a pair of high-order Bessel beams, synthesized using a liquid crystal spatial light modulator, optical drills of tuned helicities are experimentally observed, and the simplest cases of matter processing (fluorescence) with such beams are demonstrated. Optical drill beams are expected to be useful in material processing by light or in cell and particle manipulation in biomedical applications., This work has received funding from European Social Fund (Project No. 09.3.3-LMT-K712-17-0016) under grant agreement with the Research Council of Lithuania (LMTLT) and also from the Spanish Min-istry of Science, Innovation and Universities (MICINN) under Grants No. PID2019-109175GB-C21 and No. PID2019-111436RB-C22. N.J. acknowledges financial support from MICINN through grant "Juan de la Cierva-Incorporacion" IJC2018-037897-I and Agen-cia Valenciana de la Innovacio through Grant No. INNVA1/2020/92.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low field slice-selective ZTE imaging of ultra-short T2 tissues based on spin-locking.

  • Borreguero-Morata, José
  • Galve-Conde, Fernando
  • Algarín-Guisado, José Miguel|||0000-0003-2644-7225
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Alonso-Otamendi, Joseba
[EN] Magnetic Resonance Imaging of hard biological tissues is very challenging due to small proton abundance and ultra-short T-2 decay times, especially at low magnetic fields, where sample magnetization is weak. While several pulse sequences, such as Ultra-short Echo Time (UTE), Zero Echo Time (ZTE) and SWeep Imaging with Fourier Transformation (SWIFT), have been developed to cope with ultra-short lived MR signals, only the latter two hold promise of imaging tissues with sub-millisecond T-2 times at low fields. All these sequences are intrinsically volumetric, thus 3D, because standard slice selection using a long soft radio-frequency pulse is incompatible with ultra-short lived signals. The exception is UTE, where double half pulses can perform slice selection, although at the cost of doubling the acquisition time. Here we demonstrate that spin-locking is a versatile and robust method for slice selection for ultra-short lived signals, and present three ways of combining this pulse sequence with ZTE imaging of the selected slice. With these tools, we demonstrate slice-selected 2D ex vivo imaging of the hardest tissues in the body at low field (260 mT) within clinically acceptable times., This work was supported by the Ministerio de Ciencia e Innovacion of Spain through research grant PID2019-111436RB-C21. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana (IDIFEDER/2018/022 and IDIFEDER/2021/004). JB acknowledges support from the Innodocto program of the Agencia Valenciana de la Innovacion (INNTA3/2021/17).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Light-activated controlled release of camptothecin by engineering porous materials: the ship in a bottle concept in drug delivery

  • Rivero-Buceta, Eva María
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
  • Encheva, Mirela E.
  • Cech, Bradley
  • Fernández, Eduardo
  • Landry, Christopher C.
[EN] Many systems for controlled drug release have been developed using different types of nanoparticles modified with azobenzene moieties. In these systems, drug release is often triggered by UV irradiation (either direct or using a near-infrared photosensitizer). These drug delivery systems often face challenges to their use, such as their lack of stability in physiological environments and concerns about their toxicity and bioavailability, that have hindered their translation from pre-clinical studies to clinical trials. Here, we propose a conceptual change by shifting photoswitching activity from the vehicle (nanoparticle) to the load (drug). In this "ship in a bottle" concept, the molecule to be delivered is trapped within a porous nanoparticle and its release is accomplished through a photoisomerization process. Using molecular dynamics, we designed and synthesized a photoswitchable prodrug of the antitumor drug camptothecin that contains an azobenzene functionality, and we have prepared porous silica nanoparticles with pore diameters designed to limit its release when in the trans form. Molecular modelling was used to show that the cis isomer was smaller and better able to pass through the pores than the trans isomer, which was confirmed by stochastic optical reconstruction microscopy (STORM). Thus, prodrug-loaded nanoparticles were prepared by loading the cis prodrug and then using UV irradiation to convert cis to trans isomers, trapping them, within the pores. Release of the prodrug was then accomplished by using a different UV wavelength to convert trans isomers back to cis. In this way, prodrug encapsulation and release could be achieved "on demand" through controlled cis-trans photoisomerization, which allowed the prodrug to be delivered safely and its release to be triggered precisely at the region of interest. Finally, the intracellular release and cytotoxic activity of this novel drug delivery system has been validated in several human cell lines, confirming the ability of this system to accurately control the release of the camptothecin prodrug., This work was supported by the Spanish Ministry of Science and Innovation (grant number PID2019-111436RB-C21). The authors also acknowledge the Microscopy Imaging Center at the University of Vermont and Dr Victoria Moreno (Centro de Investigacion Principe Felipe, Valencia, Spain) for her technical support in the in vitro studies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Magneto-stimulation limits in medical imaging applications with rapid field dynamics

  • Grau-Ruiz, Daniel
  • Rigla, Juan P.
  • López-Comazzi, Guillermo
  • Galve, Fernando
  • Díaz-Caballero, Elena
  • Gramage, Carlos
  • González Hernández, José Manuel
  • Pellicer, Rubén
  • Rios, Alfonso
  • Alonso, Joseba
  • Pallás-Lodeiro, Eduardo
  • Algarín-Guisado, José Miguel|||0000-0003-2644-7225
  • Borreguero-Morata, José
  • Bosch-Esteve, Rubén|||0000-0002-7316-7819
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] Objective. The goal of this work is to extend previous peripheral nerve stimulation (PNS) studies to scenarios relevant to magnetic particle imaging (MPI) and low-field magnetic resonance imaging (MRI), where field dynamics can evolve at kilo-hertz frequencies. Approach. We have constructed an apparatus for PNS threshold determination on a subject's limb, capable of narrow and broad-band magnetic stimulation with pulse characteristic times down to 40 mu s. Main result. From a first set of measurements on 51 volunteers, we conclude that the PNS dependence on pulse frequency/rise-time is compatible with traditional stimulation models where nervous responses are characterized by a rheobase and a chronaxie. Additionally, we have extended pulse length studies to these fast timescales and confirm thresholds increase significantly as trains transition from tens to a few pulses. We also look at the influence of field spatial distribution on PNS effects, and find that thresholds are higher in an approximately linearly inhomogeneous field (relevant to MRI) than in a rather homogeneous distribution (as in MPI). Significance. PNS constrains the clinical performance of MRI and MPI systems. Extensive magneto-stimulation studies have been carried out recently in the field of MPI, where typical operation frequencies range from single to tens of kilo-hertz. However, PNS literature is scarce for MRI in this fast regime, relevant to small (low inductance) dedicated MRI setups, and where the resonant character of MPI coils prevents studies of broad-band stimulation pulses. This work advances in this direction., We thank all 51 anonymous volunteers for their participation in these studies, and Manuel Murbach for discussions. This work was supported by the European Commission under grant 737 180 (FET-Open: HistoMRI) and Ministerio de Ciencia e Innovacion of Spain for research grant PID2019-111436RB-C21. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Prepolarized MRI of Hard Tissues and Solid-State Matter

  • Borreguero-Morata, José
  • Pallás-Lodeiro, Eduardo
  • Algarín-Guisado, José Miguel|||0000-0003-2644-7225
  • Bosch-Esteve, Rubén|||0000-0002-7316-7819
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • González Hernández, José Manuel
  • Rigla, Juan P.
  • Galve, Fernando
  • Grau-Ruiz, Daniel
  • Pellicer, Rubén
  • Rios, Alfonso
  • Alonso, Joseba
[EN] Prepolarized MRI (PMRI) is a long-established technique conceived to counteract the loss in signal-to-noise ratio (SNR) inherent to low-field MRI systems. When it comes to hard biological tissues and solid-state matter, PMRI is severely restricted by their ultra-short characteristic relaxation times. Here we demonstrate that efficient hard-tissue prepolarization is within reach with a special-purpose 0.26 T scanner designed for ex vivo dental MRI and equipped with suitable high-power electronics. We have characterized the performance of a 0.5 T prepolarizer module, which can be switched on and off in 200 mu s. To this end, we have used resin, dental and bone samples, all with T1$$ {\mathbf{T}}_{\mathbf{1}} $$ times of the order of 20 ms at our field strength. The measured SNR enhancement is in good agreement with a simple theoretical model, and deviations in extreme regimes can be attributed to mechanical vibrations due to the magnetic interaction between the prepolarization and main magnets., Agencia Valenciana de la Innovaci~o; European Regional Development Fund; Ministerio de Ciencia e Innovacion; This work was supported by the Ministerio de Ciencia e Innovaci~on of Spain through research grant PID2019-111436RBC21. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022). JMG and JB acknowledge support from the Innodocto program of the Agencia Valenciana de la Innovacion (INNTA3/2020/22 and INNTA3/2021/17); Ministerio de Ciencia e Innovaci~on of Spain, Grant/Award Number: PID2019-111436RB-C21; Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana, Grant/Award Number: IDIFEDER/2018/022; Innodocto program of the Agencia Valenciana de la Innovacion, Grant/Award Numbers: INNTA3/2020/22, INNTA3/2021/17
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a Prodrug of Camptothecin for Enhanced Treatment of Glioblastoma Multiforme

  • Checa-Chavarria, Elisa
  • Sanchez Martos, Miguel Angel
  • Martinez Navarrete, Gema
  • Soto-Sanchez, Cristina
  • FERNANDEZ JOVER, EDUARDO
  • Rivero-Buceta, Eva María
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
[EN] A novel therapeutic approach for glioblastoma multiforme (GBM) therapy has been carried out through in vitro and in vivo testing by using the prodrug camptothecin-20-O-(5-aminolevulinate) (CPT-ALA). The incorporation of ALA to CPT may promote uptake of the cytotoxic molecule by glioblastoma cells where the heme synthesis pathway is active, improving the therapeutic action and reducing the side effects over healthy tissue. The antitumor properties of CPT-ALA have been tested on different GBM cell lines (U87, U251, and C6) as well as in an orthotopic GBM model in rat, where potential toxicity in central nervous system cells was analyzed. In vitro results indicated no significant differences in the cytotoxic effect over the different GBM cell lines for CPT and CPT-ALA, albeit cell mortality induced by CPT over normal cell lines was significantly higher than CPT-ALA. Moreover, intracranial GBM in rat was significantly reduced (30% volume) with 2 weeks of CPT-ALA treatment with no significant side effects or alterations to the well-being of the animals tested. 5-ALA moiety enhances CPT diffusion into tumors due to solubility improvement and its metabolic-based targeting, increasing the CPT cytotoxic effect on malignant cells while reducing CPT diffusion to other proliferative healthy tissue. We demonstrate that CPT-ALA blocks proliferation of GBM cells, reducing the infiltrative capacity of GBM and promoting the success of surgical removal, which improves life expectancy by reducing tumor recurrence., Financial support from Spanish Ministry of Economy and Competitiveness (Projects PID2019-111436RB-C21 and SEV2016-0683) and the Generalitat Valenciana (Project PROMETEO/2017/060) is gratefully acknowledged. We thank Prof. Luis Fernandez (Group of Structural Mechanics and Materials Modellings-GEMM, University of Zaragoza, Spain) for donation of human GBM cell lines. We are grateful to Dr. Lawrence Humphreys (CIBER-BBN) for critical reading of the manuscript
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mesoporous Silica and Oligo (Ethylene Glycol) Methacrylates-Based Dual-Responsive Hybrid Nanogels

  • Macchione, Micaela A.
  • Aristizábal Bedoya, Dariana
  • Strumia, Miriam C.
  • Rivero-Buceta, Eva María
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
[EN] Polymeric-inorganic hybrid nanomaterials have emerged as novel multifunctional platforms because they combine the intrinsic characteristics of both materials with unexpected properties that arise from synergistic effects. In this work, hybrid nanogels based on mesoporous silica nanoparticles, oligo (ethylene glycol) methacrylates, and acidic moieties were developed employing ultrasound-assisted free radical precipitation/dispersion polymerization. Chemical structure was characterized by infrared spectroscopy and nuclear magnetic resonance. Hydrodynamic diameters at different temperatures were determined by dynamic light scattering, and cloud point temperatures were determined by turbidimetry. Cell viability in fibroblast (NIH 3T3) and human prostate cancer (LNCaP) cell lines were studied by a standard colorimetric assay. The synthetic approach allows covalent bonding between the organic and inorganic components. The composition of the polymeric structure of hybrid nanogels was optimized to incorporate high percentages of acidic co-monomer, maintaining homogeneous nanosized distribution, achieving appropriate volume phase transition temperature values for biomedical applications, and remarkable pH response. The cytotoxicity assays show that cell viability was above 80% even at the highest nanogel concentration. Finally, we demonstrated the successful cell inhibition when they were treated with camptothecin-loaded hybrid nanogels., Financial support from Spanish Ministry of Science and Innovation (Projects PID2019111436RB-C21), Program BID-FONCyT (Projects PICT-2015-2477 and PICT-2020-1955), SECYT-UNC (Project "Proyecto Consolidar" Res. No. 411/2018), and CONICET (Project PIP 11220200103225CO).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sequential pore wall functionalization in covalent organic frameworks and application to stable camptothecin delivery systems

  • De Santana Oliveira, Artur
  • Misturini, Alechania
  • Moreno, Victoria
  • Castella Pergher, Sibele Berenice
  • Rivero-Buceta, Eva María
  • VIDAURRE-AGUT, CARLA
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
[EN] Post-synthetic modification of covalent organic frameworks (COFs) is strongly demanded in order to provide additional functionalities to their structures. However, the introduction of functional groups during the synthesis of two dimensional COFs (2D COFs) is highly discouraged, as they can interfere with the ox-ox stacking forces, compromising framework integrity. Here, we show that direct incorporation of nucleophyllic groups (e.g., primary amines) on pore wall during the synthesis of a 2D-COF (COF-5) is possible by sequential substitution of original monomers. Subsequent bonding of the antitumor drug camptothecin results in a stable hydrophobic drug delivery system. Water adsorption isotherms modelling indicates that the insertion of CPT ligand in the framework promotes a hydrophobic effect that protects a region of COF chain from boronate ester hydrolysis and resulting degradation, which is also proven by stability testing in physiological conditions. Furthermore, this hydrophobic nature favors cell internalization kinetics by promoting interactions with the lipophilic cell membrane. To the best of our knowledge, this is the first case of a stable drug delivery system based on covalently conjugated COFs., Financial support of the Spanish Ministry of Economy and Competitiveness (projects PID2019-111436RB-C21 and SEV-20160683) is gratefully acknowledged. A.S.O. thanks the PDSE Scholarship supported by CAPES/Brazil. A.M. thanks Generalitat Valenciana for a predoctoral fellowship GRISOLIAP/2019/084. We fully appreciate the assistance of the ASIC computational facilities and the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Portable magnetic resonance imaging of patients indoors, outdoors and at home

  • Guallart-Naval, Teresa
  • Pellicer-Guridi, Rubén
  • Vives-Gilabert, Yolanda
  • González, José M.
  • Rigla, Juan P.
  • Martínez, Pablo
  • Lloris, Francisco J.
  • Marcos-Perucho, Álvaro
  • Negnevitsky, Vlad
  • Martí-Bonmatí, Luis
  • Rios, Alfonso
  • Alonso-Otamendi, Joseba
  • Algarín-Guisado, José Miguel|||0000-0003-2644-7225
  • Galve-Conde, Fernando
  • Bosch-Esteve, Rubén|||0000-0002-7316-7819
  • Pallás-Lodeiro, Eduardo
  • Borreguero-Morata, José
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] Mobile medical imaging devices are invaluable for clinical diagnostic purposes both in and outside healthcare institutions. Among the various imaging modalities, only a few are readily portable. Magnetic resonance imaging (MRI), the gold standard for numerous healthcare conditions, does not traditionally belong to this group. Recently, low-field MRI technology companies have demonstrated the first decisive steps towards portability within medical facilities and vehicles. However, these scanners' weight and dimensions are incompatible with more demanding use cases such as in remote and developing regions, sports facilities and events, medical and military camps, or home healthcare. Here we present in vivo images taken with a light, small footprint, low-field extremity MRI scanner outside the controlled environment provided by medical facilities. To demonstrate the true portability of the system and benchmark its performance in various relevant scenarios, we have acquired images of a volunteer's knee in: (i) an MRI physics laboratory; (ii) an office room; (iii) outside a campus building, connected to a nearby power outlet; (iv) in open air, powered from a small fuel-based generator; and (v) at the volunteer's home. All images have been acquired within clinically viable times, and signal-to-noise ratios and tissue contrast suffice for 2D and 3D reconstructions with diagnostic value. Furthermore, the volunteer carries a fixation metallic implant screwed to the femur, which leads to strong artifacts in standard clinical systems but appears sharp in our low-field acquisitions. Altogether, this work opens a path towards highly accessible MRI under circumstances previously unrealistic., This work was supported by the Ministerio de Ciencia e Innovacion of Spain through research grant PID2019-111436RB-C21. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022 and IDIFEDER/2021/004). JMG and JB acknowledge support from the Innodocto program of the Agencia Valenciana de la Innovacion (INNTA3/2020/22 and INNTA3/2021/17).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Silica-Based Stimuli-Responsive Systems for Antitumor Drug Delivery and Controlled Release

  • Corma Canós, Avelino|||0000-0002-2232-3527
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
  • Rivero-Buceta, Eva María
[EN] The administration of cytotoxic drugs in classical chemotherapy is frequently limited by water solubility, low plasmatic stability, and a myriad of secondary effects associated with their diffusion to healthy tissue. In this sense, novel pharmaceutical forms able to deliver selectively these drugs to the malign cells, and imposing a space-time precise control of their discharge, are needed. In the last two decades, silica nanoparticles have been proposed as safe vehicles for antitumor molecules due to their stability in physiological medium, high surface area and easy functionalization, and good biocompatibility. In this review, we focus on silica-based nanomedicines provided with specific mechanisms for intracellular drug release. According to silica nature (amorphous, mesostructured, and hybrids) nanocarriers responding to a variety of stimuli endogenously (e.g., pH, redox potential, and enzyme activity) or exogenously (e.g., magnetic field, light, temperature, and ultrasound) are proposed. Furthermore, the incorporation of targeting molecules (e.g., monoclonal antibodies) that interact with specific cell membrane receptors allows a selective delivery to cancer cells to be carried out. Eventually, we present some remarks on the most important formulations in the pipeline for clinical approval, and we discuss the most difficult tasks to tackle in the near future, in order to extend the use of these nanomedicines to real patients., FundingFinancial support from Spanish Ministry of Science and Innovation (Projects PID2019-111436RB-C21 and SEV-2016-0683), and the Generalitat Valenciana (Project PROMETEO/2017/060) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sequential pore wall functionalization in covalent organic frameworks and application to stable camptothecin delivery systems

  • Oliveira, A.D.S.
  • Rivero-Buceta, Eva
  • Vidaurre-Agut, Carla
  • Misturini, A.
  • Moreno, V.
  • Jordá Moret, José Luis
  • Sastre, Germán
  • Pergher, S.B.C.
  • Botella Asunción, Pablo
Post-synthetic modification of covalent organic frameworks (COFs) is strongly demanded in order to provide additional functionalities to their structures. However, the introduction of functional groups during the synthesis of two dimensional COFs (2D COFs) is highly discouraged, as they can interfere with the π-π stacking forces, compromising framework integrity. Here, we show that direct incorporation of nucleophyllic groups (e.g., primary amines) on pore wall during the synthesis of a 2D-COF (COF-5) is possible by sequential substitution of original monomers. Subsequent bonding of the antitumor drug camptothecin results in a stable hydrophobic drug delivery system. Water adsorption isotherms modelling indicates that the insertion of CPT ligand in the framework promotes a hydrophobic effect that protects a region of COF chain from boronate ester hydrolysis and resulting degradation, which is also proven by stability testing in physiological conditions. Furthermore, this hydrophobic nature favors cell internalization kinetics by promoting interactions with the lipophilic cell membrane. To the best of our knowledge, this is the first case of a stable drug delivery system based on covalently conjugated COFs., Financial support of the Spanish Ministry of Economy and Competitiveness (projects PID2019-111436RB-C21 and SEV-2016-0683) is gratefully acknowledged. A.S.O. thanks the PDSE Scholarship supported by CAPES/Brazil. A.M. thanks Generalitat Valenciana for a predoctoral fellowship GRISOLIAP/2019/084. We fully appreciate the assistance of the ASIC computational facilities and the Electron Microscopy Service of the Universitat Politècnica de València.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of a Prodrug of Camptothecin for Enhanced Treatment of Glioblastoma Multiforme

  • Checa-Chavarria, Elisa
  • Rivero-Buceta, Eva
  • Sanchez Martos, Miguel Angel
  • Martinez Navarrete, Gema
  • Soto-Sánchez, Cristina
  • Botella Asunción, Pablo
  • Fernández, Eduardo
A novel therapeutic approach for glioblastoma multiforme (GBM) therapy has been carried out through in vitro and in vivo testing by using the prodrug camptothecin-20-O-(5-aminolevulinate) (CPT-ALA). The incorporation of ALA to CPT may promote uptake of the cytotoxic molecule by glioblastoma cells where the heme synthesis pathway is active, improving the therapeutic action and reducing the side effects over healthy tissue. The antitumor properties of CPT-ALA have been tested on different GBM cell lines (U87, U251, and C6) as well as in an orthotopic GBM model in rat, where potential toxicity in central nervous system cells was analyzed. In vitro results indicated no significant differences in the cytotoxic effect over the different GBM cell lines for CPT and CPT-ALA, albeit cell mortality induced by CPT over normal cell lines was significantly higher than CPT-ALA. Moreover, intracranial GBM in rat was significantly reduced (30% volume) with 2 weeks of CPT-ALA treatment with no significant side effects or alterations to the well-being of the animals tested. 5-ALA moiety enhances CPT diffusion into tumors due to solubility improvement and its metabolic-based targeting, increasing the CPT cytotoxic effect on malignant cells while reducing CPT diffusion to other proliferative healthy tissue. We demonstrate that CPT-ALA blocks proliferation of GBM cells, reducing the infiltrative capacity of GBM and promoting the success of surgical removal, which improves life expectancy by reducing tumor recurrence., Financial support from Spanish Ministry of Economy and Competitiveness (Projects PID2019-111436RB-C21 and SEV-2016-0683) and the Generalitat Valenciana (Project PROMETEO/2017/060) is gratefully acknowledged. We thank Prof. Luis Fernández (Group of Structural Mechanics and Materials Modellings-GEMM, University of Zaragoza, Spain) for donation of human GBM cell lines. We are grateful to Dr. Lawrence Humphreys (CIBER-BBN) for critical reading of the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Isolation and Quantification of miRNA from the Biomolecular Corona on Mesoporous Silica Nanoparticles

  • Vidaurre-Agut, Carla
  • Rivero-Buceta, Eva
  • Landry, Christopher C.
  • Botella Asunción, Pablo
To understand the factors that control the formation of the biomolecular corona, a systematic study of the adsorption of several miRNAs shown to be important in prostate cancer on amine- functionalized mesoporous silica nanoparticles (MSN-NH2) has been performed. Process parameters including miRNA type, nanoparticle concentration, incubation temperature and incubation time were investigated, as well as the potential competition for adsorption between different miRNA molecules. The influence of proteins and particle PEGylation on miRNA adsorption were also explored. We found that low particle concentrations and physiological temperature both led to increased miRNA adsorption. Adsorption of miRNA was also higher when proteins were present in the same solution; reducing or preventing protein adsorption by PEGylating the MSNs hindered adsorption. Finally, the amount of miRNA adsorbed from human serum by MSN-NH2 was compared to a commercial miRNA purification kit (TaqMan®, Life Technologies, Carlsbad, CA, USA). MSN-NH2 adsorbed six times as much miRNA as the commercial kit, demonstrating higher sensitivity to subtle up- and downregulation of circulating miRNA in the blood of patients., This research was funded by the Spanish Ministry of Economy and Competitiveness (project PID2019-111436RB-C21), and the Generalitat Valenciana (project PROMETEO/2017/060)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silica-Based Stimuli-Responsive Systems for Antitumor Drug Delivery and Controlled Release

  • Corma, Avelino
  • Botella Asunción, Pablo
  • Rivero-Buceta, Eva
The administration of cytotoxic drugs in classical chemotherapy is frequently limited by water solubility, low plasmatic stability, and a myriad of secondary effects associated with their diffusion to healthy tissue. In this sense, novel pharmaceutical forms able to deliver selectively these drugs to the malign cells, and imposing a space-time precise control of their discharge, are needed. In the last two decades, silica nanoparticles have been proposed as safe vehicles for antitumor molecules due to their stability in physiological medium, high surface area and easy functionalization, and good biocompatibility. In this review, we focus on silica-based nanomedicines provided with specific mechanisms for intracellular drug release. According to silica nature (amorphous, mesostructured, and hybrids) nanocarriers responding to a variety of stimuli endogenously (e.g., pH, redox potential, and enzyme activity) or exogenously (e.g., magnetic field, light, temperature, and ultrasound) are proposed. Furthermore, the incorporation of targeting molecules (e.g., monoclonal antibodies) that interact with specific cell membrane receptors allows a selective delivery to cancer cells to be carried out. Eventually, we present some remarks on the most important formulations in the pipeline for clinical approval, and we discuss the most difficult tasks to tackle in the near future, in order to extend the use of these nanomedicines to real patients., Financial support from Spanish Ministry of Science and Innovation (Projects PID2019-111436RB-C21 and SEV-2016-0683), and the Generalitat Valenciana (Project PROMETEO/2017/060) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mesoporous Silica and Oligo (Ethylene Glycol) Methacrylates-Based Dual-Responsive Hybrid Nanogels

  • Macchione, Micaela A.
  • Bedoya, Dariana Aristizábal
  • Rivero-Buceta, Eva
  • Botella Asunción, Pablo
  • Strumia, Miriam C.
Polymeric-inorganic hybrid nanomaterials have emerged as novel multifunctional platforms because they combine the intrinsic characteristics of both materials with unexpected properties that arise from synergistic effects. In this work, hybrid nanogels based on mesoporous silica nanoparticles, oligo (ethylene glycol) methacrylates, and acidic moieties were developed employing ultrasound-assisted free radical precipitation/dispersion polymerization. Chemical structure was characterized by infrared spectroscopy and nuclear magnetic resonance. Hydrodynamic diameters at different temperatures were determined by dynamic light scattering, and cloud point temperatures were determined by turbidimetry. Cell viability in fibroblast (NIH 3T3) and human prostate cancer (LNCaP) cell lines were studied by a standard colorimetric assay. The synthetic approach allows covalent bonding between the organic and inorganic components. The composition of the polymeric structure of hybrid nanogels was optimized to incorporate high percentages of acidic co-monomer, maintaining homogeneous nanosized distribution, achieving appropriate volume phase transition temperature values for biomedical applications, and remarkable pH response. The cytotoxicity assays show that cell viability was above 80% even at the highest nanogel concentration. Finally, we demonstrated the successful cell inhibition when they were treated with camptothecin-loaded hybrid nanogels., Financial support from Spanish Ministry of Science and Innovation (Projects PID2019-111436RB-C21), Program BID-FONCyT (Projects PICT-2015-2477 and PICT-2020-1955), SECYT-UNC (Project “Proyecto Consolidar” Res. No. 411/2018), and CONICET (Project PIP 11220200103225CO).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-activated controlled release of camptothecin by engineering porous materials: the ship in a bottle concept in drug delivery

  • Rivero-Buceta, Eva
  • Encheva, M.E.
  • Cech, B
  • Fernandez, E
  • Sastre, Germán
  • Landry, C.C.
  • Botella Asunción, Pablo
Many systems for controlled drug release have been developed using different types of nanoparticles modified with azobenzene moieties. In these systems, drug release is often triggered by UV irradiation (either direct or using a near-infrared photosensitizer). These drug delivery systems often face challenges to their use, such as their lack of stability in physiological environments and concerns about their toxicity and bioavailability, that have hindered their translation from pre-clinical studies to clinical trials. Here, we propose a conceptual change by shifting photoswitching activity from the vehicle (nanoparticle) to the load (drug). In this “ship in a bottle” concept, the molecule to be delivered is trapped within a porous nanoparticle and its release is accomplished through a photoisomerization process. Using molecular dynamics, we designed and synthesized a photoswitchable prodrug of the antitumor drug camptothecin that contains an azobenzene functionality, and we have prepared porous silica nanoparticles with pore diameters designed to limit its release when in the trans form. Molecular modelling was used to show that the cis isomer was smaller and better able to pass through the pores than the trans isomer, which was confirmed by stochastic optical reconstruction microscopy (STORM). Thus, prodrug-loaded nanoparticles were prepared by loading the cis prodrug and then using UV irradiation to convert cis to trans isomers, trapping them, within the pores. Release of the prodrug was then accomplished by using a different UV wavelength to convert trans isomers back to cis. In this way, prodrug encapsulation and release could be achieved “on demand” through controlled cis-trans photoisomerization, which allowed the prodrug to be delivered safely and its release to be triggered precisely at the region of interest. Finally, the intracellular release and cytotoxic activity of this novel drug delivery system has been validated in several human cell lines, confirming the ability of this system to accurately control the release of the camptothecin prodrug., This work was supported by the Spanish Ministry of Science and Innovation (grant number PID2019-111436RB-C21). The authors also acknowledge the Microscopy Imaging Center at the University of Vermont and Dr Victoria Moreno (Centro de Investigación Príncipe Felipe, Valencia, Spain) for her technical support in the in vitro studies.