Pasar al contenido principal

PALEOINTERFAZ: ELEMENTO ESTRATEGICO EN LA PREVENCION DE INCENDIOS FORESTALES. DESARROLLO DE METODOLOGIAS DE ANALISIS 3D Y MULTIESPECTRAL PARA LA GESTION INTEGRADA

PID2019-111581RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Evaluation of archeological heritage exposure to wildfires through simulation techniques. A study case in Galicia (Northwestern Spain)

  • Alonso Martínez, Laura
  • Rincón España, Thais Virginia
  • Picos Martín, Juan
  • Armesto González, Julia
Wildfires are one of the most prevalent hazards to which archeological sites are exposed. Wildfire regimes are expected to intensify in coming years in terms of frequency, severity and burn area, leading to an increased number of extreme wildfire events. In this context, it is essential to develop strategies for protecting cultural heritage from fires. These strategies involve exposure assessments which take inventories of cultural assets and evaluate how they would be impacted by fires. This study presents a workflow for analyzing the exposure of archeological assets to wildfires when these assets are dispersed throughout a landscape. In this study, a forested landscape with 692 granite-based cultural-heritage elements (mainly petroglyphs and dolmens) was analyzed. The workflow uses a wildfire simulation software that predicts variables related to wildfire behavior. In the study area, a total of 355 systematically distributed ignition points were simulated for both typical and atypical meteorological conditions. The output values analyzed were the flame length (FL), the rate of spread (ROS) and the fireline intensity (FLI), all variables related to the damage that the cultural elements could incur and to the feasibility of fire control. Outputs were analyzed in the immediate surroundings of archeological elements, deemed the paleointerface area. Additionally, simulations were also performed with virtual modifications to the vegetation structure in the paleointerface areas to determine whether this type of fire management strategy could help reduce the exposure of these elements to wildfires. Different behaviors were encountered in typical and atypical meteorological conditions. In typical conditions, controlling a fire would be nearly impossible in 53 % of the total paleointerface area. In atypical conditions, this was the case for 100 % of the paleointerface area. This reveals the great exposure of these archeological elements to wildfires, even in typical conditions, and indicates that fire management strategies are needed to protect them. The different results obtained also highlight the importance of considering both meteorological situations when performing exposure assessments. The results of the modified-vegetation-structure simulation revealed that fire management strategies focused on decreasing the height of shrubs, in shrub areas, and of the understory, in forested areas, can help to reduce wildfire exposure in both typical and atypical meteorological conditions. Finally, this workflow represents a tool that fulfills essential parts of a fire management plan: exposure analysis, emergency preparedness, and the design of fire reduction strategies. Specifically, this is a tool for prioritizing elements in need of management in landscapes with abundant scattered archeological elements where executing comprehensive preventive actions, although ideal, is not affordable., Agencia Estatal de Investigación | PID2019-111581RB-I00, Xunta de Galicia | Ref. ED481B 2024/059, Interreg España-Portugal | Ref. 0139_FIREPOCTEP_MAS_6_E, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic identification of forest disturbance drivers based on their geometric pattern in Atlantic forests

  • Alonso Martinez, Laura
  • Picos Martín, Juan
  • Armesto González, Julia
Monitoring forest disturbances has become essential towards the design and tracking of sustainable forest management. Multiple methodologies have been developed to detect these disturbances. However, few studies have focused on the automatic detection of disturbance drivers, an essential task as each disturbance has different implications for the functioning of the ecosystem and associated management actions. Wildfires and harvesting are two of the major drivers of forest disturbances across different ecosystems. In this study, an automated methodology is presented to automatically distinguish between the two once the disturbance is detected, using the properties of its geometry and shape. A cluster analysis was performed to automatically individualize each disturbance and afterwards calculate its geometric properties. Using these properties, a decision tree was built that allowed for the distinction between wildfires and harvesting with an overall accuracy of 91%. This methodology and further research relating to it could pose an essential aid to national and international agencies for incorporating forest-disturbance-driver-related information into forest-focused reports., Xunta de Galicia, Ministerio de Universidades | Ref. FPU19/02054, Agencia Estatal de Investigación | Ref. PID2019-111581RB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Desarrollo de metodologías de análisis 3D y multiespectral para la gestión integrada de incendios forestales y patrimonio (paleointerfaz), Desenvolvemento de metodoloxías de análises 3d e multiespectrais para a xestión integrada de incendios forestais e patrimonio (paleointerfaz), Development of 3d and multispectral analysis methodologies for the integrated management of forest fires and heritage (paleointerface)

  • Solares Canal, Ana
El patrimonio arqueológico es la prueba de la contribución de las civilizaciones a la humanidad y su conservación es una responsabilidad de las sociedades actuales. Este patrimonio se encuentra con frecuencia en zonas forestales y entremezclado con la vegetación, lo que genera tanto beneficios como riesgos para su conservación. La presencia de vegetación descontrolada puede representar una amenaza para ellos ya que constituye un vector de propagación de incendios forestales, una de sus principales amenazas de acuerdo con la UNESCO. Estos eventos pueden dañar o incluso destruir los elementos y su entorno. En el contexto actual de cambio climático, los incendios forestales son más frecuentes y virulentos, por lo que las políticas nacionales e internacionales se dirigen hacia la prevención centrándose en la gestión adecuada de la vegetación. Esta gestión en el entorno de los yacimientos puede ayudar a preservar el patrimonio, reducir el impacto de los incendios y mejorar la resiliencia del territorio frente a estas amenazas. En este campo, los productos obtenidos mediante sensores de teledetección pueden ser de gran ayuda. Sin embargo, pocos estudios han abordado la caracterización de la vegetación en el entorno de los yacimientos, lo que puede ser un importante enfoque para abordar la gestión conjunta. En este contexto, en esta tesis se ha definido el concepto Paleointerfaz cómo las áreas de transición entre zonas forestales y yacimientos arqueológicos. Con el fin de localizar y caracterizar a escala de paisaje estas áreas, se ha desarrollado una metodología específica que permitió identificar aquellas en las que la gestión de la vegetación podría ser más eficaz en la prevención de incendios forestales. También se desarrolló una metodología automatizada para generar mapas de modelos de combustibles utilizando imágenes Sentinel-2 y LiDAR aéreo. El mapa obtenido, con una resolución espacial de 5 m, sirvió como base para poder recrear actuaciones de gestión de la vegetación en las áreas de Paleointerfaz y evaluar los cambios que suponen en el comportamiento de los incendios. Además, se elaboró una encuesta sobre el riesgo de incendios en áreas arqueológicas y las medidas de gestión preventivas, dirigida a expertos en patrimonio, el sector forestal y la gestión forestal. También se trabajó en la caracterización de la vegetación a escala de detalle en dichas áreas. Para ello, se centraron los esfuerzos en el uso de datos LiDAR. Por un lado, se utilizó LiDAR aéreo para generar una metodología de identificación de especies arbóres a escala de rodal. Por otro lado, se utilizaron datos LiDAR portable para desarrollar metodologías que permiten identificar, segmentar, caracterizar dasométricamente e identificar la especie a nivel de árbol individual. Estas metodologías abren nuevos horizontes para la gestión de la vegetación en las áreas de Paleointerfaz, ofreciendo productos valiosos para el diseño de acciones de gestión integrada con la prevención de incendios forestales. Estos procesos pueden facilitar el estudio del impacto potencial de las tipologías de vegetación en los elementos arqueológicos o el diseño puntos de anclaje y áreas aptas para el tránsito de maquinaria de extinción de incendios, entre otros aspectos. Además, pueden ser extrapolables a áreas de interfaz urbano forestal y emplearse para determinar el cumplimiento de las directrices marcadas en la legislación vigente. Las metodologías desarrolladas, están basadas en el uso de software de acceso libre, aspecto crucial para poder replicar las metodologías en diferentes condiciones y con otros datos brutos. Todas ellas fueron publicadas en revistas de difusión internacionales (JCR), presentadas en congresos nacionales e internacionales o publicadas en revistas de divulgación científica., O cambio climático en xeral, e os grandes incendios en particular, constitúen unha das principais ameazas do patrimonio natural e cultural mundial, segundo consta en informes recentes da UNESCO. Os incendios forestais, en moitos casos, son consecuencia directa do incremento das temperaturas e os períodos de seca prolongados. En Galicia os grandes incendios forestais son cada vez máis grandes en número, frecuencia e virulencia, supoñendo unha gran ameaza para o patrimonio natural galego. A prevención deste tipo de incendios é, cada vez, unha necesidade maior. A gran abundancia de enclaves de patrimonio arqueolóxico en terreo forestal en Galicia deriva nunha oportunidade para abordar unha xestión integrada. As actuacións na contorna de certos enclaves de interese patrimonial, xa sexa pola súa extensión, posición topográfica, ou outros, poden axudar a deter ou frear o avance de eventuais incendios forestais ocorridos na súa contorna. Esta tese pretende desenvolver metodoloxías baseadas en tecnoloxías cartográficas avanzadas, xa sexa multiespectrais, plataformas UAV e/ou sistemas móbiles portables de mapeado 3D, que permitan caracterizar xacementos arqueolóxicos e enclaves patrimoniais de interese, documentar a topografía e/ou fisiografía na súa contorna e cartografar a vexetación circundante. Isto permitirá establecer potenciais riscos, pero tamén posibles áreas estratéxicas de xestión onde actuacións na área de interface permitan a protección dos xacementos e a protección da contorna natural onde se sitúan., According to recent UNESCO reports, climate change in general, and large fires in particular, constitute one of the main threats to the world's natural and cultural heritage. Forest fires, in many cases, are a direct consequence of rising temperatures and prolonged periods of drought. In Galicia, large forest fires are increasing in number, frequency and virulence, representing a great threat to the Galician natural heritage. Prevention of this type of fire is an increasing necessity. The great abundance of archaeological heritage sites in forest areas in Galicia is an opportunity to address an integrated management. Actions in the environment of certain assets of heritage interest, either by their extension, topographic position, or others, can help stop or curb the advance of possible forest fires that occurred in their surroundings. This thesis aims to develop methodologies based on advanced cartographic technologies, such as multispectral, UAV platforms and/or portable mobile 3D mapping systems, which will allow to characterize archaeological and heritage assets of interest, document topography and/or physiography in their environment, and map the surrounding vegetation. That way, it will be possible to establish potential risks, but also possible strategic areas of management where actions in the interface area allow the protection of the assets and the protection of the natural environment where they are located., Agencia Estatal de Investigación | Ref. PID2019-111581RB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic forest change detection through a bi-annual time series of satellite imagery: toward production of an integrated land cover map

  • Alonso Martinez, Laura
  • Picos Martín, Juan
  • Armesto González, Julia
Land cover mapping is fundamental for national and international agencies to monitor forest resources. However, monitoring forest disturbances by direct comparison of these maps poses several difficulties and challenges. As a result, different methodologies have been explored to detect forest disturbances. However, most of them cannot be fully integrated with land cover map production since they require additional input data, while others are not suitable for monitoring small land parcels. This study presents a methodology that fulfils the need to integrate land cover mapping with land cover change detection. Specifically, this methodology was designed to complement the Sentinel-2-based land cover mapping used in Galicia, northwest Spain, a region characterized by small land parceling. First, two previously obtained land cover maps from 2019 and 2020 were compared to identify all the pixels with potential land cover changes using QGIS. The behavior of spectral indexes in a time series were then analyzed to identify which of the previously identified pixels correspond to forest disturbances. This step was implemented in the software R. Using the Normalized Difference Vegetation Index (NDVI) to detect different land cover changes it was obtained an overall accuracy of 82%, considering the existence of varying phenologies, diverse topographic conditions, and areas with a high level of stand fragmentation. This study could help agencies that have already developed their own land cover maps to easily advance the integration of their maps with land cover change detection, since this technique can be applied with any land cover mapping methodology based on multitemporal analysis of satellite images, without the need for additional input data., Ministerio de Universidades | Ref. FPU19/02054, Agencia Estatal de Investigación | Ref. PID2019-111581RB-I00, Xunta de Galicia, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Mapping feasibility for wood supply: a high-resolution geospatial approach to enhance sustainable forest management in Galicia (NW Spain)

  • Rodríguez Dorna, Andrés
  • Alonso Martinez, Laura
  • Picos Martín, Juan
  • Armesto González, Julia
The forest value chain is key to the European transition to a climate-neutral economy. Sustainable forest management is essential for this task. To plan sustainable forest management, it is essential to track forest resources in relation to their feasibility for wood supply. This means considering the constraints that may limit the incorporation of these resources into the forest value chain. Maps adapted to specific regional constraints and to the characteristics of specific forests are essential for performing sustainable forest management at a local scale. This study presents a methodology for the integrated analysis of geospatial data focused on classifying the land and the forest resources of a region according to their feasibility for wood supply. It produces maps of the feasibility for wood supply in an area and of the existing forest resources at a 10 m spatial resolution. This was done by integrating information about the legal and technical constraints present in the area according to decision rules. The land was classified into three classes: favorable, intermediate or unfavorable. Additionally, updated forest-oriented land cover maps were produced to analyze the feasibility for wood supply of the forest resources present in the region. It was found that 42% of the Eucalyptus spp., 48% of the conifers and 30% of the broadleaves in the study area were located in favorable areas. These maps would help in the quest for more sustainable forest management in the region and aid in boosting the competitiveness of the regional forest value chain., Agencia Estatal de Investigación | Ref. PID2019-111581RB-I00, Ministerio de Universidades | Ref. FPU19/02054, Universidade de Vigo
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic tree detection and attribute characterization using portable terrestrial lidar

  • Solares Canal, Ana
  • Alonso Martinez, Laura
  • Picos Martín, Juan
  • Armesto González, Julia
Currently, the implementation of portable laser scanners (PLS) in forest inventories is being studied, since they allow for significantly reduced field-work time and costs when compared to the traditional inventory methods and other LiDAR systems. However, it has been shown that their operability and efficiency are dependent upon the species assessed, and therefore, there is a need for more research assessing different types of stands and species. Additionally, a few studies have been conducted in Eucalyptus stands, one of the tree genus that is most commonly planted around the world. In this study, a PLS system was tested in a Eucalyptus globulus stand to obtain different metrics of individual trees. An automatic methodology to obtain inventory data (individual tree positions, DBH, diameter at different heights, and height of individual trees) was developed using public domain software. The results were compared to results obtained with a static terrestrial laser scanner (TLS). The methodology was able to identify 100% of the trees present in the stand in both the PLS and TLS point clouds. For the PLS point cloud, the RMSE of the DBH obtained was 0.0716, and for the TLS point cloud, it was 0.176. The RMSE for height for the PLS point cloud was 3.415 m, while for the PLS point cloud, it was 10.712 m. This study demonstrates the applicability of PLS systems for the estimation of the metrics of individual trees in adult Eucalyptus globulus stands., Agencia Estatal de Investigación | Ref. PID2019-111581RB-I00, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU19/02054, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Automatic differentiation of Eucalyptus species through Sentinel-2 images, Worldview-3 images and LiDAR data

  • Alonso Martinez, Laura
  • Rodríguez Dorna, Andrés
  • Picos Martín, Juan
  • Costas Comesaña, Fernando
  • Armesto González, Julia
Eucalyptus constitutes one of the most common tree genera used in forest plantations worldwide. In Europe, Eucalyptus trees are especially common in the Northwest of the Iberian Peninsula, E. nitens and E. globulus being the most commonly cultivated species. Each species presents particularities that lend to different exploitation strategies and industrial usages. Therefore, updated knowledge about the abundance and spatial distribution of the different species is important for forest planning. This is a special challenge for areas where forest land is highly fragmented. Remote sensing has been used to efficiently monitor the distribution of the Eucalyptus genera, however little research has been able to map specific Eucalyptus species. This study evaluates the efficiency of Sentinel-2 data, Worldview-3 images, and Airborne LiDAR data in the differentiation of E. nitens and E. globulus. Supervised classifications were performed using neural networks for these data sets both individually and in combination. The highest accuracies were obtained when using Sentinel-2 data in combination with LiDAR point clouds and when using Sentinel-2 data in a multitemporal approach. The best time of year to differentiate between the two species is during the emergence of spring shoots. Worldview-3 images have a moderate capacity to differentiate between the two species, although this is increased when textural metrics are included. This study can serve as the basis for generating Eucalyptus species distribution maps, which will allow for improved forest management and planning., Xunta de Galicia, Agencia Estatal de Investigación | Ref. PID2019-111581RB-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Challenges in automatic forest change reporting through land cover mapping

  • Alonso Martinez, Laura
  • Rodríguez Dorna, Andrés
  • Picos Martín, Juan
  • Armesto González, Julia
Up-to-date knowledge about changes in forest resources and their spatial distribution is essential for sustainable forest management. Therefore, monitoring of forest evolution is increasingly demanded by national and international agencies to design forestry policies and to track their progress. Annually updated land cover maps based on open access satellite imagery may serve as a primary tool for monitoring forest surface evolution over time. Spatially detailed information about forest change might be obtained by comparing land cover maps over time. This study aims to better understand the processes underlying pixels whose land cover changes from 1 year’s map to the next and to understand why errors occur. In this study, two annual land cover maps were produced using Sentinel-2 images and afterwards they were compared. The comparison was performed in terms of total surface occupied in each map by each of the classes (net comparison) and in terms of spatial agreement, comparing the results pixel to pixel. The study was performed for the entire region of Galicia (in the Northwest of Spain) for the years 2019 and 2020. Land cover maps obtained had overall accuracies of 82 and 85 per cent. Differences in the total surface of change were encountered when performing the net comparison and spatial agreement comparison. The detailed analysis performed in this study helps to better understand the processes underlying the maps’ discrepancies revealing the processes leading to wrongly identified forest changes. Future studies could aim to integrate this knowledge into the monitoring system to improve the ultimate usability of land cover maps to retrieve information about forest changes., Ministerio de Universidades | Ref. FPU19/02054, Agencia Estatal de Investigación | Ref. PID2019-111581RB-I00, Universidade de Vigo/CISUG, Xunta de Galicia
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Deciphering the plot preferences of forest contractors when purchasing stumpage through conjoint analysis

  • Alonso Martinez, Laura
  • Picos Martín, Juan
  • Iglesias Pérez, Maria Carmen
  • Iglesias González, David
  • Armesto González, Julia
In order to have sustainable wood value chains, it is essential to understand the factors that determine the incorporation of wood resources into them. Forest contractors are among the key players in this process. This study evaluates the preferences of forest contractors when purchasing forest parcels. The variables considered are: slope of the terrain, distance to the nearest road, parcel size, parcel shape, and the fragmentation of the surrounding land. The study area is Galicia, a region in northwestern Spain that is dominated by small-scale family forestry. An Attribute Levels Survey was designed to establish threshold values of the considered variables to afterwards perform a Choice Based Conjoint Analysis (CBCA). The CBCA allowed to analyze the preferences of forest contractors in relation to the values of these variables and their relative importance. Also, it allowed to generate a map of the level of preference for all the Galician forest parcels with individual, private ownership. The most noteworthy result of this survey was that size greatly impacts the preference of timber contractors, preceded by slope and followed by distance to roads. These results will aid in the design of landscape-scale policies in a geospatial dimension, like the promotion of forest associations, and will lead to an improvement in the sustainability of wood supply., Agencia Estatal de Investigación | Ref. PID2019-111581RB-I00, Agencia Estatal de Investigación | Ref. PID2020-118101GB-I00, Agencia Estatal de Investigación | Ref. FPU19/02054, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Forest cover mapping and Pinus species classification using very high-resolution satellite images and random forest

  • Alonso Martinez, Laura
  • Picos Martín, Juan
  • Armesto González, Julia
Advances in remote sensing technologies are generating new perspectives concerning the role of and methods used for National Forestry Inventories (NFIs). The increase in computation capabilities over the last several decades and the development of new statistical techniques have allowed for the automation of forest resource map generation through image analysis techniques and machine learning algorithms. The availability of large-scale data and the high temporal resolution that satellite platforms provide mean that it is possible to obtain updated information about forest resources at the stand level, thus increasing the quality of the spatial information. However, photointerpretation of satellite and aerial images is still the most common way that remote sensing information is used for NFIs or forest management purposes. This study describes a methodology that automatically maps the main forest covers in Galicia (Eucalyptus spp., conifers and broadleaves) using Worldview-2 and the random forest classifier. Furthermore, the method also evaluates the separate mapping of the three most abundant Pinus tree species in Galicia (Pinus pinaster, Pinus radiata and Pinus sylvestris). According to the results, Worldview-2 multispectral images allow for the efficient differentiation between the main forest classes that are present in Galicia with a very high degree of accuracy (91%) and ample spatial detail. Pinus species can also be efficiently differentiated (83%)., Xunta de Galicia, Agencia Estatal de Investigación | Ref. PID2019-111581RB-I00, Universidade de Vigo
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Forest land cover mapping at a regional scale using multi-temporal sentinel-2 imagery and RF models

  • Alonso Martinez, Laura
  • Picos Martín, Juan
  • Armesto González, Julia
Over the last several decades, thanks to improvements in and the diversification of open-access satellite imagery, land cover mapping techniques have evolved significantly. Notable changes in these techniques involve the automation of different steps, yielding promising results in terms of accuracy, class detection and efficiency. The most successful methodologies that have arisen rely on the use of multi-temporal data. Several different approaches have proven successful. In this study, one of the most recently developed methodologies is tested in the region of Galicia (in Northwestern Spain), with the aim of filling gaps in the mapping needs of the Galician forestry sector. The methodology mainly consists of performing a supervised classification of individual images from a selected time series and then combining them through aggregation using decision criteria. Several of the steps of the methodology can be addressed in multiple ways: pixel resolution selection, classification model building and aggregation methods. The effectiveness of these three tasks as well as some others are tested and evaluated and the most accurate and efficient parameters for the case study area are highlighted. The final land cover map that is obtained for Galicia has high accuracy metrics (an overall accuracy of 91.6%), which is in line with previous studies that have followed this methodology in other regions. This study has led to the development of an efficient open-access solution to support the mapping needs of the forestry sector., Xunta de Galicia, Ministerio de Universidades | Ref. FPU19/02054, Agencia Estatal de Investigación | Ref. PID2019-111581RB-I00
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

A systematic approach to map and evaluate the wildfire behavior at a territorial scale in the Northwestern Iberian Peninsula

  • Rincón, Thais
  • Alonso, Laura
  • Picos, Juan
  • Molina Terrén, Domingo
  • Armesto, Julia
In the current context of extreme wildfires, understanding fire behavior at a territorial level has proven crucial for territory planning. This type of analysis is usually conducted by analyzing past wildfire statistics. In this study, we forego the past information related to wildfires and analyze, instead, the behavior of the entire territory in the face of wildfires. This allows for the distribution of ignition points to be systematized and for typical and atypical weather scenarios to be considered. This analysis relies on the use of wildfire simulation software. Ignition points used for the simulations were distributed using a systematic 1 × 1 km grid throughout the whole study area. Wildfires were simulated for each ignition point using eight different weather scenarios representing both typical and atypical weather conditions. The fire behavior on the territory was analyzed using rate of spread and intensity parameters for each simulated wildfire. It was observed that this territory is extremely prone to large wildfires both in typical and atypical weather conditions and that there is a tendency for extreme behaviors to develop. Some features were identified as prevention issues that ought to be addressed. This study develops a strategy to evaluate, in a systematic manner, the response of the territory to the threat of wildfires., This research is part of the project \u201CPrevention and management of the landscape exposed to large forest fires in cross-border rural areas between Spain and Portugal\u201D, Program EP-INTERREG V, grant FIREPOCTEP+, and the project \u201CPaleointerface: Strategic element for the prevention of forest fires. Development of multispectral and 3d analysis methodologies for integrated management\u201D project, funded by MICIU/AEI/10.13039/501100011033, Spanish Ministry of Sciences and Innovation, Grant code PID2019-111581RB-I00; it is also supported by an FPU grant from the Spanish Ministry of Sciences and Innovation under Grant FPU19/02054.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Operational fuel model map for Atlantic landscapes using ALS and Sentinel-2 images

  • Solares-Canal, Ana
  • Alonso, Laura
  • Rincón, Thais
  • Picos, Juan
  • Molina-Terrén, Domingo M.
  • Becerra, Carmen
  • Armesto, Julia
Background: In the new era of large, high-intensity wildfire events, new fire prevention and extinction strategies are emerging. Software that simulates fire behavior can play a leading role. In order for these simulators to provide reliable results, updated fuel model maps are required. Previous studies have shown that remote sensing is a useful tool for obtaining information about vegetation structures and types. However, remote sensing technologies have not been evaluated for operational purposes in Atlantic environments. In this study, we describe a methodology based on remote sensing data (Sentinel-2 images and aerial point clouds) to obtain updated fuel model maps of an Atlantic area. These maps could be used directly in wildfire simulation software. Results: An automated methodology has been developed that allows for the efficient identification and mapping of fuel models in an Atlantic environment. It mainly consists of processing remote sensing data using supervised classifications to obtain a map with the geographical distribution of the species in the study area and maps with the geographical distribution of the structural characteristics of the forest covers. The relationships between the vegetation species and structures in the study area and the Rothermel fuel models were identified. These relationships enabled the generation of the final fuel model map by combining the different previously obtained maps. The resulting map provides essential information about the geographical distribution of fuels; 32.92% of the study area corresponds to models 4 and 7, which are the two models that tend to develop more dangerous behaviors. The accuracy of the final map is evaluated through validation of the maps that are used to obtain it. The user and producer accuracy ranged between 70 and 100%. Conclusion: This paper describes an automated methodology for obtaining updated fuel model maps in Atlantic landscapes using remote sensing data. These maps are crucial in wildfire simulation, which supports the modern wildfire suppression and prevention strategies. Sentinel-2 is a global open access source, and LiDAR is an extensively used technology, meaning that the approach proposed in this study represents a step forward in the efficient transformation of remote sensing data into operational tools for wildfire prevention., This research is part of the “PALEOINTERFACE: STRATEGIC ELEMENT FOR THE PREVENTION OF FOREST FIRES. DEVELOPMENT OF MULTISPECTRAL AND 3D ANALYSIS METHODOLOGIES FOR INTEGRATED MANAGEMENT” project, funded by the competitive call RETOS 2019 of the Spanish Ministry of Sciences and Innovation, Grant code PID2019-111581RB-I00. This research is also funded by the Administration of Rural Areas of the Government of Galicia under Grant 2020CONVINVENTARIOFORESTALR002; and it is also supported by an FPU grant from the Spanish Ministry of Sciences and Innovation under Grant FPU19/02054.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Operational fuel model map for Atlantic landscapes using ALS and Sentinel-2 images

  • Solares-Canal, Ana
  • Alonso, Laura
  • Rincón, Thais
  • Picos, Juan
  • Molina-Terrén, Domingo M.
  • Becerra, Carmen
  • Armesto, Julia
Background: In the new era of large, high-intensity wildfire events, new fire prevention and extinction strategies are emerging. Software that simulates fire behavior can play a leading role. In order for these simulators to provide reliable results, updated fuel model maps are required. Previous studies have shown that remote sensing is a useful tool for obtaining information about vegetation structures and types. However, remote sensing technologies have not been evaluated for operational purposes in Atlantic environments. In this study, we describe a methodology based on remote sensing data (Sentinel-2 images and aerial point clouds) to obtain updated fuel model maps of an Atlantic area. These maps could be used directly in wildfire simulation software. Results: An automated methodology has been developed that allows for the efficient identification and mapping of fuel models in an Atlantic environment. It mainly consists of processing remote sensing data using supervised classifications to obtain a map with the geographical distribution of the species in the study area and maps with the geographical distribution of the structural characteristics of the forest covers. The relationships between the vegetation species and structures in the study area and the Rothermel fuel models were identified. These relationships enabled the generation of the final fuel model map by combining the different previously obtained maps. The resulting map provides essential information about the geographical distribution of fuels; 32.92% of the study area corresponds to models 4 and 7, which are the two models that tend to develop more dangerous behaviors. The accuracy of the final map is evaluated through validation of the maps that are used to obtain it. The user and producer accuracy ranged between 70 and 100%. Conclusion: This paper describes an automated methodology for obtaining updated fuel model maps in Atlantic landscapes using remote sensing data. These maps are crucial in wildfire simulation, which supports the modern wildfire suppression and prevention strategies. Sentinel-2 is a global open access source, and LiDAR is an extensively used technology, meaning that the approach proposed in this study represents a step forward in the efficient transformation of remote sensing data into operational tools for wildfire prevention., This research is part of the “PALEOINTERFACE: STRATEGIC ELEMENT FOR THE PREVENTION OF FOREST FIRES. DEVELOPMENT OF MULTISPECTRAL AND 3D ANALYSIS METHODOLOGIES FOR INTEGRATED MANAGEMENT” project, funded by the competitive call RETOS 2019 of the Spanish Ministry of Sciences and Innovation, Grant code PID2019-111581RB-I00. This research is also funded by the Administration of Rural Areas of the Government of Galicia under Grant 2020CONVINVENTARIOFORESTALR002; and it is also supported by an FPU grant from the Spanish Ministry of Sciences and Innovation under Grant FPU19/02054.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A systematic approach to map and evaluate the wildfire behavior at a territorial scale in the Northwestern Iberian Peninsula

  • Rincón, Thais
  • Alonso, Laura
  • Picos, Juan
  • Molina Terrén, Domingo
  • Armesto, Julia
In the current context of extreme wildfires, understanding fire behavior at a territorial level has proven crucial for territory planning. This type of analysis is usually conducted by analyzing past wildfire statistics. In this study, we forego the past information related to wildfires and analyze, instead, the behavior of the entire territory in the face of wildfires. This allows for the distribution of ignition points to be systematized and for typical and atypical weather scenarios to be considered. This analysis relies on the use of wildfire simulation software. Ignition points used for the simulations were distributed using a systematic 1 × 1 km grid throughout the whole study area. Wildfires were simulated for each ignition point using eight different weather scenarios representing both typical and atypical weather conditions. The fire behavior on the territory was analyzed using rate of spread and intensity parameters for each simulated wildfire. It was observed that this territory is extremely prone to large wildfires both in typical and atypical weather conditions and that there is a tendency for extreme behaviors to develop. Some features were identified as prevention issues that ought to be addressed. This study develops a strategy to evaluate, in a systematic manner, the response of the territory to the threat of wildfires., This research is part of the project \u201CPrevention and management of the landscape exposed to large forest fires in cross-border rural areas between Spain and Portugal\u201D, Program EP-INTERREG V, grant FIREPOCTEP+, and the project \u201CPaleointerface: Strategic element for the prevention of forest fires. Development of multispectral and 3d analysis methodologies for integrated management\u201D project, funded by MICIU/AEI/10.13039/501100011033, Spanish Ministry of Sciences and Innovation, Grant code PID2019-111581RB-I00; it is also supported by an FPU grant from the Spanish Ministry of Sciences and Innovation under Grant FPU19/02054.