Pasar al contenido principal

INTERACCIONES ROCA-FUNDIDO Y ROCA-FLUIDO EN LA LITOSFERA: IMPLICACIONES PARA LA FORMACION DE YACIMIENTOS MINERALES

PID2019-111715GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE GRANADA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mantle-to-crust metal transfer by nanomelts

  • Schettino, Erwin
  • González-Jiménez, José María
  • Marchesi, Claudio
  • Palozza, Francesco
  • Blanco-Quintero, Idael Francisco
  • Gervilla, Fernando
  • Braga, Roberto
  • Garrido, Carlos J.
  • Fiorentini, Marco
  • Blanco-Quintero, Idael Francisco|||/items/7fa3db0a-c737-4d07-92cc-9acf0634db50
The transfer of chalcophile metals across the continental lithosphere has been traditionally modeled based on their chemical equilibrium partitioning in sulfide liquids and silicate magmas. Here, we report a suite of Ni-Fe-Cu sulfide droplets across a trans-lithospheric magmatic network linking the subcontinental lithospheric mantle to the overlying continental crust. Petrographic characteristics and numerical calculations both support that the sulfide droplets were mechanically scavenged from the mantle source during partial melting and transported upwards by alkaline magmas rising through the continental lithosphere. Nanoscale investigation by high-resolution transmission electron microscopy (HR-TEM) documents the presence of galena (PbS) nanoinclusions within the sulfide droplets that are involved in the mantle-to-crust magma route. The galena nanoinclusions show a range of microstructural features that are inconsistent with a derivation of PbS by exsolution from the solid products of the Ni-Fe-Cu sulfide liquid. It is argued that galena nanoinclusions crystallized from a precursor Pb(-Cu)-rich nanomelt, which was originally immiscible within the sulfide liquid even at Pb concentrations largely below those required for attaining galena saturation. We suggest that evidence of immiscibility between metal-rich nanomelts and sulfide liquids during magma transport would disrupt the classical way by which metal flux and ore genesis are interpreted, hinting for mechanical transfer of nanophases as a key mechanism for sourcing the amounts of mantle-derived metals that can be concentrated in the crust.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Native copper formation associated with serpentinization in the Cheshmeh-Bid ophiolite massif (Southern Iran)

  • Eslami, Alireza
  • Malvoisin, Benjamin
  • Grieco, Giovanni
  • Aradi, László Elöd
  • Marchesi, Claudio
  • Cavallo, Alessandro
  • Montanini, Alessandra
  • Borghini, Giulio
  • Mathur, Ryan
  • Ikehata, K.
  • Davis, Donald W.
  • Li, Chun-Hui
  • Szabó, Csaba
In the Cheshmeh-Bid district of the Khajeh-Jamali ophiolitic massifs (Southern Iran), mantle peridotites are intruded by abundant pyroxenite dykes. A few of these dykes are remarkable for the occurrence of native copper associated with the development of a metasomatic reaction zone. The dykes are progressively reacted, from their margins towards the center, with an amphibole + antigorite selvage, followed by a centimeter-thick clinopyroxene + antigorite assemblage and, finally, by the native copper-bearing zone consisting of clinopyroxene + chlorite + antigorite. Native Cu occurs along cleavages and partially healed fractures in clinopyroxene, and as massive grains intergrown with antigorite. Copper isotope signatures and thermodynamic calculations show that the main driver for reaction zone formation is Ca-metasomatism. Native copper forms at the expense of chalcocite in the reaction zone. Such a reaction can only occur in reducing conditions, in agreement with the analysis of fluid inclusions composition displaying H and CH. Such fluids presumably originated from the hydration of mantle rocks. The observed reaction zone and native copper mineralization are thus interpreted as the result of Ca-metasomatism during hydrothermal alteration of the oceanic lithosphere. This is consistent with U/Pb dating of titanite, suggesting formation during the Albian when the dykes were exposed on the seafloor in a supra-subduction setting. The source for copper mineralization, as revealed by Cu isotopes, is probably mantle-like., We would like to thank the two anonymous reviewers, and the editor Marco Scambelluri for their constructive and valuable comments and suggestions on our manuscript. Valentina Batanova and Valérie Magnin (ISTerre) are thanked for their help during the electron microprobe measurements. We would like to express our sincere gratitude to local people in Khajeh-Jamali village and workers from the Fars Chromite Company. The work of L. E. Aradi and Cs. Szabó was supported by the ELTE Institutional Excellence Program (TKP2020-IKA-05) managed by the Hungarian Ministry of Human Capacities. The work of G. Grieco was supported by the Italian Ministry of Education (MIUR) through the projects “PRIN2017 - Mineral reactivity, a key to understand large-scale processes” (2017L83S77) and “Dipartimenti di Eccellenza 2018-2022”. C.M.´s research has been funded by project PID2019-111715GB-I00 / AEI / 10.13039/501100011033.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metallogenic fingerprint of a metasomatized lithospheric mantle feeding gold endowment in the western Mediterranean basin

  • Schettino, Erwin
  • González-Jiménez, José María
  • Saunders, Edward
  • Hidas, Károly
  • Gervilla, Fernando
  • Garrido, Carlos J.
  • Marchesi, Claudio
14 Figuras, Material Suplementaro, [EN] Spinel peridotite xenoliths (one plagioclase-bearing) hosted in alkaline basalts from Tallante (southeast Spain) record the mineralogical and geochemical fingerprint of the subcontinental lithospheric mantle (SCLM) evolution beneath the southern Iberian margin. Mantle metasomatism in fertile lherzolites caused the crystallization of clinopyroxene + orthopyroxene + spinel clusters through the percolation of Miocene subalkaline melts during the westward migration of the subduction front in the western Mediterranean. In the Pliocene, heat and volatiles provided by alkaline host-magmas triggered very low melting degrees of metasomatic pyroxene-spinel assemblages, producing melt quenched to silicate glass and reactive spongy coronae around clinopyroxene and spinel. Refertilization of the Tallante peridotites induced the precipitation of base-metal sulfides (BMS) included in metasomatic clino and orthopyroxene. These sulfides consist of pentlandite ± chalcopyrite ± bornite aggregates with homogeneous composition in terms of major elements (Ni, Fe, Cu) and semi-metals (Se, As, Te, Sb, Bi), but with wide variability of platinum-group elements (PGE) fractionation (0.14 < PdN/IrN < 30.74). Heterogeneous PGE signatures, as well as the presence of euhedral Pt-Pd-Sn-rich platinum-group minerals (PGM) and/or Auparticles within BMS, cannot be explained by conventional models of chalcophile partitioning from sulfide melt. Alternatively, we suggest that they reflect the incorporation of distinct populations of BMS, PGM, and metal nanoparticles (especially of Pt, Pd, and Au) during mantle melting and/or melt percolation. Therefore, we conclude that Miocene subalkaline melts released by asthenosphere upwelling upon slab tearing of the Iberian continental margin effectively stored metals in metasomatized domains of this sector of the SCLM. Remarkably high Au concentrations in Tallante BMS (median 1.78 ppm) support that these metasomatized domains provided a fertile source of metals, especially gold, for the ore-productive Miocene magmatism of the westernmost Mediterranean, This research was supported by the BES-2017-079949 Ph.D. fellowship to ES. The Spanish projects PID2019-111715GB-I00/AEI/10.13039/501100011033 and RTI2018-099157-A-I00 provided funding for field emission gun–environmental scanning electron microscopy (FEG-ESEM) and electron microprobe microanalyses (EMPA)/laser ablation–inductively coupled plasma–mass spectrometry (LA-ICP-MS) analyses of sulfides, respectively, while the Junta de Andalucía project FUMESA B-RNM-189-UGR18 financed LA-ICP-MS analyses of silicates. Research grants, infrastructures, and human resources leading to this research have benefited from funding by the European Social Fund and the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chromium Isotope Behavior During Serpentinite Dehydration in Oceanic Subduction Zones

  • Xiong, Jia-Wei
  • Chen, Yi-Xiang
  • Shen, Ji
  • Marchesi, Claudio
  • Scambelluri, Marco
  • Qin, Li-Ping
  • López Sánchez-Vizcaíno, Vicente
  • Padrón‐Navarta, José Alberto
  • Menzel, Manuel D.
  • Garrido, Carlos J.
Fluids released through the dehydration of serpentinite can be rich in Cl, which enables the significant mobility of Cr in subduction zones. However, the Cr isotope behavior accompanying the mobility of Cr during serpentinite dehydration is still poorly constrained. Here, we report high-precision Cr isotope data for a unique suite of serpentinites that represent metamorphic products at different depths in oceanic subduction zones. Low-grade serpentinites affected by significant Cr loss during serpentinization exhibit remarkably higher δCr, while samples with Cr contents >∼1,800 ppm typically preserve mantle-like δCr. Antigorite serpentinites have an average δCr value of −0.17‰ ± 0.19‰ (n = 12, 2SD), which is statistically lower than those of low-grade serpentinite (−0.05‰ ± 0.30‰, n = 80, 2SD) and higher-grade chlorite harzburgite (−0.10‰ ± 0.27‰, n = 22, 2SD). This suggests that resolvable Cr isotope fractionation occurs during serpentinite dehydration, which is explained by the variability of Cr isotope behavior in the presence of Cl-bearing fluids at different dehydration stages. No obvious Cr isotope fractionation was found during chlorite harzburgite dehydration, probably related to the limited Cr mobility in a Cl-poor fluid. Other processes, such as melt extraction, external fluid influx and retrograde metamorphism, have negligible effects on the Cr isotope systematics of meta-serpentinites. Fluids released by serpentinite dehydration may have a great effect on the Cr isotope heterogeneity of mantle wedge peridotites and arc magmas., This study was supported by funds from the National Key R&D Program of China (2018YFA0702600), the Strategic Priority Research Program (B) of CAS (XDB41000000), the Natural Science Foundation of China (42073029, 41973004), the Fundamental Research Funds for the Central Universities, and pre-research Projects on Civil Aerospace Technologies No. D020204 funded by CNSA. C.J.G., J.A.P.N., M.M. and V.L.S.V. acknowledge grant RUSTED (PID2022-136471N-B-C21 & C22) funded by MICIN/AEI/10.13039/501100011033 and the FEDER program “Una manera de hacer Europa.” C.M. was funded by project PID2019-111715GB-I00/AEI/10.13039/501100011033. J.A.P.N. further acknowledges a Ramón y Cajal contract (RYC2018-024363-I) funded by MICIN/AEI/10.13039/501100011033 and the FSE program “FSE invierte en tu futuro,” and M.M. acknowledges postdoctoral fellowship n° Postdoc_21_00791 funded by the Junta de Andalucía (Consejeria de Conocimiento y Universidades), and EU funds FEDER and FSE. This research is part of the Junta de Andalucía research groups RNM-131 and RNM-374., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distribution of critical metals in evolving pyrite from massive sulfide ores of the Iberian Pyrite Belt

  • Yesares, Lola
  • Piña, Rubén
  • González-Jiménez, José María
  • Sáez, Reinaldo
  • Ruíz de Almodóvar, Gerardo
  • Fanlo, Isabel
  • Pons, Juan Manuel
  • Vega, Raquel
With >90 known deposits containing original reserves of >2400 Mt of sulfide ore, the Iberian Pyrite Belt (IPB) is the largest volcanogenic massive sulfide (VMS) province on Earth. In these evolving mineral systems, texturally different pyrite exhibits characteristic mineralogy and trace element fingerprints. Pyrite (Py-1), which is well preserved in the polymetallic ores that crystallized at the earliest stage of VMS deposit formation, consists of kernels of pyrite framboids surrounded by concentric colloform bands and ended by faceted outlines. It is rich in some metals like Pb, Zn, Sb and As (mostly hosted as nano-to-micron-sized particles, including galena, tetrahedrite and arsenopyrite) but depleted in Cu, Co and Bi. In contrast, pyrite from the pyritic and Cu-rich ore overprinted by late fluids exhibits spongy-looking (Py-2) or homogenous (Py-3) cores surrounded by external facets with crystallographic continuity across the whole single grains due to re-crystallization. Py-2 is depleted in most trace elements with the exception of Au and Bi, which occur both in solid solutions and as nano-to-micron-sized inclusions. Py-3 has the highest Cu, Ag, Co and Ni (mainly associated to nano-to-micron-sized particles of tennantite, chalcopyrite and gersdorffite) and the lowest Au contents in the form of native gold. The progressive increase in metal contents from inner to outer parts of Py-1 matches with the onset of the economic metal endowment of VMS deposits in the IPB, whereas Py-2 and Py-3 are associated with metal shoot processes that led to both leached and high-grade ores, very likely when mafic rocks were emplaced into the footwall of the deposits., This research is a contribution to the projects CGL2016-79204-R, PID2019-111715GB-I00 which are supported by the Spanish Government, and 18/IF/6347 granted by Science Foundation Ireland (SFI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mantle-to-crust metal transfer by nanomelts

  • Schettino, Erwin
  • González-Jiménez, José María
  • Marchesi, Claudio
  • Palozza, Francesco
  • Blanco-Quintero, Idael Francisco
  • Gervilla, Fernando
  • Braga, Roberto
  • Garrido, Carlos J.
  • Fiorentini, Marco
The transfer of chalcophile metals across the continental lithosphere has been traditionally modeled based on their chemical equilibrium partitioning in sulfide liquids and silicate magmas. Here, we report a suite of Ni-Fe-Cu sulfide droplets across a trans-lithospheric magmatic network linking the subcontinental lithospheric mantle to the overlying continental crust. Petrographic characteristics and numerical calculations both support that the sulfide droplets were mechanically scavenged from the mantle source during partial melting and transported upwards by alkaline magmas rising through the continental lithosphere. Nanoscale investigation by high-resolution transmission electron microscopy (HR-TEM) documents the presence of galena (PbS) nanoinclusions within the sulfide droplets that are involved in the mantle-to-crust magma route. The galena nanoinclusions show a range of microstructural features that are inconsistent with a derivation of PbS by exsolution from the solid products of the Ni-Fe-Cu sulfide liquid. It is argued that galena nanoinclusions crystallized from a precursor Pb(-Cu)-rich nanomelt, which was originally immiscible within the sulfide liquid even at Pb concentrations largely below those required for attaining galena saturation. We suggest that evidence of immiscibility between metal-rich nanomelts and sulfide liquids during magma transport would disrupt the classical way by which metal flux and ore genesis are interpreted, hinting for mechanical transfer of nanophases as a key mechanism for sourcing the amounts of mantle-derived metals that can be concentrated in the crust., This research was supported by the BES-2017-079949 Ph.D. fellowship to E.S. The Spanish projects PID2019-111715GB-I00/AEI/10.13039/501100011033, NANOMET PID2022-138768OB-I00, and MECOBE ProyExcel_00705 provided funding for field emission gun–environmental scanning electron microscopy (FEG-ESEM), focused-ion beam (FIB) and high-resolution transmission electron microscopy (HR-TEM). M.F. and F.P. acknowledge financial support from the Australian Research Council through ARC Linkage Project LP190100785. No permission was required to collect the samples during fieldwork. Research grants, infrastructures, and human resources leading to this research have benefited from funding from the European Social Fund and the European Regional Development Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Petrological and geochemical evidence for partial melting and melt-rock interaction in mantle rocks from the eastern part of the Sabzevar ophiolite, NE Iran

  • Rahmani, Fatemeh
  • Varas-Reus, Maria I.
  • Marchesi, Claudio
  • Noghreyan, M.
  • Mackizadeh, M. A.
  • Garrido, Carlos J.
The Sabzevar ophiolite is the most extensive and best-exposed section of oceanic lithosphere in NE Iran. In this study, we examined the mantle section of the eastern part of the Sabzevar ophiolite, where mantle peridotites are the most widespread rock type and are crosscut by pyroxenite veins and mafic dykes. Major and trace element compositions (minerals and whole-rock) of lherzolites are akin to those of abyssal peridotites from mid-ocean ridges (MOR), whereas those of harzburgites evidence formation in a supra-subduction zone (SSZ) setting. Rare-earth element (REE) patterns of whole-rock and clinopyroxene of lherzolites and harzburgites suggest polybaric melting, with initial melting in the garnet peridotite field (~5–6%), followed by ~5–15% melting for lherzolites and ~10–20% for harzburgites in the spinel peridotite field. Harzburgites show LREE enrichment incompatible with partial melting models, indicating significant interaction with SSZ-related melts, whereas analysed lherzolites experienced limited melt-rock interaction. Pyroxene dissolution and olivine precipitation in residual peridotites resulting from reaction with island arc tholeiite and/or boninite melts led to the formation of dunites. These melts eventually intruded as dykes and veins in the mantle and crustal sections of the ophiolite. In addition, boninite melts are inferred to be responsible for forming olivine pyroxenite veins within the harzburgites. We conclude that the mantle section of the Sabzevar ophiolite formed in an intra-oceanic arc setting and experienced a geochemical evolution from a MOR-like to SSZ setting. The intra-oceanic subduction of the Neotethys oceanic lithosphere and shifting conditions of melting during the development of subduction beneath the incipient island arc were responsible for the geochemical heterogeneity of mantle peridotites and the generation of SSZ-related magmas within the Sabzevar oceanic lithosphere., The work was supported by the Deutsche Forschungsgemeinschaft [VA 1568/1-1]; Ministerio de Ciencia, Innovación y Universidades [PID2019-111715GB-I00] The authors thank the University of Isfahan (Isfahan, Iran) and Instituto Andaluz de Ciencias de la Tierra (IACT, Granada, Spain) for financial support and geochemical facilities. M.I.V.R. acknowledges funding from the DFG project VA 1568/1-1. C.M.‘s research has been funded by the project PID2019-111715GB-I00 financed by MCIN/AEI/10.13039/501100011033. The authors are very grateful to R. Stern for editorial handling and to H.S. Moghadam and an anonymous reviewer for their constructive reviews of the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

El yacimiento de Zn-Pb de Castellanos (Cuba): un depósito sedimentarioexhalativo finijurásico-cretácico, The Castellanos Zn-Pb deposit (Cuba): a Finijurasic-Cretaceous sedimentary-exhalative deposit

  • Gómez-Vivo, David
  • Gervilla, Fernando
  • Azor, Antonio
  • Hernández-Díaz, Rebeca
  • Piña, Rubén
  • Álvarez, Carmen María
El yacimiento de Zn-Pb de Castellanos, situado al noroeste de la isla de Cuba, encaja en un paquete de pizarras negras intercalado en la parte superior de una potente secuencia siliciclástica (>4km), constituida principalmente por areniscas y limolitas de edad Jurásico Inferior y Medio (Formación San Cayetano). El yacimiento es estratiforme, se orienta en dirección NE-SO concordantemente con la estratificación de las pizarras encajantes y está constituido por dos bloques (el bloque Farallones al NE y el bloque Susana al SO) separados por una zona de falla con rumbo N120ºE; una zona de falla con la misma dirección limita también el bloque Farallones en su contacto NE. Este bloque se superpone a un complejo filoniano constituido por filones de pirita±calcopirita y cuarzo, de <10cm de espesor, y orientados también en dirección N120ºE. El cuerpo estratiforme principal está constituido por pirita, esfalerita y galena, con ganga de carbonatos (principalmente dolomita- ankerita y calcita), cuarzo, barita y, y menores proporciones de sericita, biotita parcialmente alterada a clorita y apatito criptocristalino. Muestra una estructura zonal con una zona basal discontinua rica en pirita y una zona superior heterogénea en la que varían tanto las proporciones modales de sulfuros+carbonatos (localmente con cuarzo), como la abundancia relativa de esfalerita+galena respecto a pirita. En conjunto, presenta una textura groseramente bandeada en la que alternan irregularmente bandas ricas en pirita, bandas con esfalerita y galena, y bandas de dolomita-ankerita (±sericita, biotita-clorita y apatito criptocristalino), mejor definida hacia el SO del cuerpo mineral. En este sentido, y hacia el techo de la mineralización., tiende a aumentar la proporción modal de cuarzo y localPaleoproterozoicomente de barita. De NE a SO también se observa una variación en la composición química de la esfalerita, la cual se hace progresivamente más rica en Zn, a la vez que cristaliza una generación más tardía de esfalerita extremadamente pobre en Fe (<1% en peso). En los límites de bloques, la mineralización está afectada por varios episodios de fracturación y brechificación durante los cuales precipitaron y/o se movilizaron diversas generaciones de calcita, barita, cuarzo y galena. En los episodios más tardíos de esta etapa precipita también calcopirita rellenando fracturas y huecos intersticiales entre los fragmentos de sulfuros previos. La interpretación genética de la mineralización de Castellanos que se propone está basada en la precipitación repetitiva (multifásica) de los sulfuros+carbonatos como consecuencia de la interacción de fluidos/salmueras mineralizantes ascendentes a lo largo de las fracturas que dieron lugar al complejo filoniano con los sedimentos ricos en materia orgánica depositados en el fondo de una subcuenca anóxica desarrollada en la cuenca de margen pasivo donde se depositó la Formación San Cayetano. Las salmueras fueron oxidantes, saturadas en sulfato, y se habrían generado en la plataforma carbonatada con evaporitas desarrollada en los márgenes de la cuenca durante el Jurásico Superior-Cretácico Inferior. La infiltración de estas salmueras a través de la potente secuencia de areniscas y limolitas aumentó su temperatura hasta 100-200ºC favoreciendo la disolución y movilización del Zn y Pb necesarios para formar la mineralización principal. La etapa de fracturación/brechificación facilitó también el ascenso de fluidos reductores equilibrados con los niveles de pizarras negras intercalados en la secuencia siliciclástica, que aportaron Au y Ba a la mineralización. En los últimos estadios, la fracturación permitió el ascenso de fluidos más profundos y calientes (~350ºC) que dieron lugar a la precipitación tardía de calcopirita., [EN] The Castellanos Zn-Pb deposit in northwest Cuba is hosted by black shales intercalated in the upper part of a thick siliciclastic sequence (>4km) mainly made up of sandstones and siltstones of Lower to Middle Jurassic age (San Cayetano Formation). The ore deposit is tabular to wedge-shaped and stratiform, oriented NE-SW conformably with the stratification of the host black shales and appears splitted into two blocks (the Farallones block to the NE and the Susana block to the SW) by a N120ºEoriented fault zone; a similarly oriented fault zone marks the NE contact of the Farallones block. This block overlies a stockwork zone made up of <10cm-thick, pyrite-chalcopyrite-quartz veins striking N120ºE too. The orebody consists of pyrite, sphalerite and galena, with carbonates (mainly dolomite-ankerite and calcite), quartz, and barite, as well as minor percentages of sericite, partly altered biotite and cryptocrystalline apatite. The internal structure is zoned and consist of a discontinuous, lower pyrite-rich level overlayed by a heterogeneous ore level with variable sulfide+carbonate (locally with quartz) modal proportions, as well as variable amounts of sphalerite+galena relative to pyrite. The upper level shows a broad banded texture defined by alternating pyrite-rich, sphalerite+galena and dolomite-ankerite (±sericite, partly altered biotite and cryptocrystalline apatite) bands, which becomes better defined towards the SW part of the orebody. Modal proportions of quartz and to a lesser extent barite increase too from NE to SW and from bottom to top, especially within the Susana block. An additional NE-SW trend is observed in the chemical composition of sphalerite, whose Fe content decreases southwestwards; this Fe-poor sphalerite coexists with a second generation of sphalerite containing even lower Fe (<1wt.%). Different events of fracturing and brecciation affected the sulfide ore near the N120ºE oriented fault zones, which promoted precipitation and remobilization of several generations of calcite, barite, quartz and galena. The late events also allowed precipitation of chalcopyrite filling fractures and interstitial spaces among fragments of the previous sulfide ore. The proposed genetic interpretation of the Castellanos orebody is based on the repeated (multiphase) precipitation of sulfides+carbonates due to the interaction between ore-forming brines migrating upwards through the stockwork fractures and organic matter-rich sediments deposited in an anoxic sub-basin developed in the major passive-margin basin where the sandstones and siltstones of the San Cayetano Formation accumulated. The ore-forming brines were oxidizing, saturated in sulfate, and generated in the evaporite-bearing carbonate platform developed at the margins of the passive-margin basin from Upper Jurassic to Lower Cretaceous times. The infiltration of these brines through the thick siliciclastic sequence gave rise to a significant increase in temperature (up to 100-200ºC), thus promoting dissolution and remobilization of the Zn and Pb quantities necessary to form the main sulfide ore. The fracturing and brecciation stages enabled upward migration of reduced fluids equilibrated with black shales intercalated at different levels of the siciliclastic sequence, which, in turn, supplied Au and Ba to the ore. Late fracturing also allowed ascent of deep, hot fluids (~350ºC) capable of precipitating chalcopyrite., Grupo de Investigación de Mineralogía, Petrología y Yacimientos Minerales de la Junta de Andalucía RNM131; Proyecto de investigación PID2019-111715GB-I00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A fragment of inherited Archaean lithospheric mantle rules the metallogeny of central Mexico

  • Schettino, Erwin
  • González-Jiménez, José María
  • Marchesi, Claudio
  • Dávalos-Elizondo, M. G.
  • Camprubí, A.
  • Colás, V.
  • Saunders, Edward
  • Aranda-Gómez, J. J.
  • Griffin, W. L.
Mantle xenoliths from Santo Domingo, Ventura-Espíritu Santo and Durango volcanic fields (Mesa Central in Mexico) experienced low degrees of partial melting in the stability fields of garnet (⁓ 2%) and spinel peridotites (⁓ 2–4%), and interacted with hydrous alkaline melts possibly during the Basin and Range extensional tectonism since Late Oligocene. Enclosed and intergranular grains of monosulfide solid solution (mss) in Santo Domingo peridotites are residues after the extraction of 0.1–0.5 fractions of Ni-Cu-rich sulphide melt during mantle melting events. On the other hand, glo˜bular sulphides (pentlandite ± chalcopyrite) hosted in glass veinlets in the Ventura-Espíritu Santo and Durango peridotites crystallized from Ni-Cu-rich droplets of sulphide melt, immiscible in the Quaternary silicate magmas that brought the xenoliths to the surface. Rhenium-depletion model ages of these sulphide populations indicate that part of the subcontinental lithospheric mantle (SCLM) of the Oaxaquia terrane (beneath Santo Domingo and Ventura-Espíritu Santo) originated in the Archaean-Paleoproterozoic as the southernmost extension of the Laurentia craton, and was assembled with the Central terrane (beneath Durango) during the Grenville orogeny (⁓ 1.0 Ga). Early Palaeozoic (⁓ 500 Ma) model ages common to sulphides from the peridotite xenoliths of the three volcanic fields suggest that the Oaxaquia-Central composite block split away from North America during the Rodinia break-up and experienced the Pan-African-Brasiliano orogeny that led to Gondwana assembly. During the Cenozoic, the reactivation of translithospheric faults bounding this composite old SCLM provided preferential pathways for focusing the ascent of ore-productive magmas/fluids associated with the subduction-related metallogeny of the Pacific active margin of Mexico., This research was supported by the BES-2017-079949 Ph.D. fellowship to ES. The Spanish MICINN projects PID2019-111715GB-I00/AEI/10.13039/501100011033 and Junta de Andalucía project Agencia de Innovación y Desarrollo de Andalucía B-RNM-189-UGR18, and Mexican UNAM-PAPIIT (Universidad Nacional Autónoma de México IA-101419) and CONACYT-Ciencia-Básica (Consejo Nacional de Ciencia y Tecnología A1-S-14574) projects provided funding for analyzes by EMPA/LA-ICP-MS and SEM, respectively. Research grants, infrastructures, and human resources leading to this research have benefited from funding by the European Social Fund and the European Regional Development Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymetallic nanoparticles in pyrite from massive and stockwork ores of VMS deposits of the Iberian Pyrite Belt

  • González-Jiménez, José María
  • Yesares, Lola
  • Piña, Rubén
  • Sáez, Reinaldo
  • Ruíz de Almodóvar, Gerardo
  • Nieto, Fernando
  • Tenorio, Sergio
This paper reports the first-ever study on nanoscale mineralogy in pyrite from the volcanogenic massive sulfide (VMS) deposits of the Iberian Pyrite Belt, southwestern Iberian Peninsula. It targeted colloform-textured grains formed at low temperature in the distal part of a polymetallic (Pb-Zn) massive sulfide lens hosted in felsic volcanoclastic rocks from the Masa Valverde deposit, and euhedral-textured grains (re)-deposited by higher temperature fluids in the Co-Au rich stockwork hosted in black shales of the Filón Norte orebody of the Tharsis deposit. The results acquired by a combination of techniques for mineral microanalysis and characterization (i.e., reflected light, FE-SEM, EPMA, LA-ICP-MS, HRTEM-STEM and TEM-EDS) show that trace amounts of metals (Au, Ag, As, Pb, Sb, Cu, Co) are incorporated as both lattice-bound and into nanoparticles (NPs). The mode of occurrence is strongly related with the evolutionary history of the mineralization. In the colloform pyrite collected from the massive sulfide lens, a rhythmic banding/oscillatory zonation with up to 3 wt% As, 5,000 ppm Pb, 1,070 ppm Sb and 750 ppm Cu is defined by the coexistence of several nano-sized layers (5 to 100 nm) and NPs (<100 nm) containing all these metals. The NPs include galena [PbS], tetrahedrite [(Cu,Fe)SbS)] and arsenopyrite [FeAsS] that exhibit euhedral and less frequently anhedral (i.e., droplet-like) morphologies being both randomly and preferentially oriented with respect to As-rich pyrite bands they are usually associated with. These features suggest formation of the NPs via direct deposition from the hydrothermal fluid(s) or low-temperature melts entrained in them as well as exsolution of trace elements originally dissolved in the As-rich pyrite structure. Additionally, some of these NPs are connected to late fractures disrupting the chemical zoning in colloform pyrite documenting a third genetic type of NPs related to late infiltration of fluids post-dating pyrite formation. In contrast, euhedral pyrite from the stockwork form well-developed homogeneous grains with discrete porous areas relatively depleted in Fe (45.20 wt%), and As (8,800 ppm) but enriched in Co (5,900 ppm). At the nanoscale, Co-enriched domains show patchy zoning defined by irregular distribution of Co– and As-rich bands of 200–500 nm in thickness. These nanometer Co– and As-rich bands are often disrupted by micron-to-nano-sized polycrystalline Au-Ag-Hg particles that fill voids in porous areas. Contact morphology anatomy between Co-rich pyrite and inclusions suggests that the Au-Ag-Hg particles are negative crystals occupying spaces originated in pyrite by coupled dissolution-reprecipitation reaction. Likewise, HRTEM observations along such pyrite-inclusion contacts show the existence of polycrystalline matrices in both pyrite and Au-Ag-Hg inclusions, the former consisting of nano-sized domains of arsenian pyrite and/or arsenopyrite in As-free pyrite and the Au-Ag-Hg inclusions made up of multiple crystal domains including nano-crystallites of Au/Ag or electrum. Recognition of crystalline nanodomains and NPs in these polycrystalline matrices raises the possibility that Au NPs or nanomelts already present in the hydrothermal fluid catalyzed the formation of these heterogeneous crystals., The Spanish project CGL2016-79204-R provided funding for field emission gun–environmental scanning electron microscopy (FEG-ESEM) and electron microprobe microanalyses (EMPA)/laser ablation–inductively coupled plasma–mass spectrometry (LA-ICP-MS) analyses of sulfides, respectively, while the PID2019-111715 GB-I00 and 18/IF/6347 project financed FIB-HRTEM analyses. Research grants, infrastructures, and human resources leading to this research have benefited from funding by the European Social Fund and the European Regional Development Fund.