Pasar al contenido principal

DESARROLLO BIOTECNOLOGICO A ESCALA PILOTO DE PRODUCCION DE COMPUESTOS DE ALMACENAMIENTO DE VALOR AÑADIDO (PHA Y/O TAG) A PARTIR DE RESIDUOS LIPIDICOS

PID2020-112550RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Comparative assessment of two bioproducts using quantitative image analysis

  • Ucha Muñoz, Carlota
  • Val del Río, Ángeles
  • Pedrouso Fuentes, Alba
  • Mosquera Corral, Anuska
  • Mesquita, Daniela P.
Polyhydroxyalkanoates (PHA) and triacylglycerides (TAG) could be used as bioplastic and precursors of biodiesel, respectively. To ensure a more controlled and efficient operation of the reactor, rapid monitoring of bioproducts accumulation is essential for enabling precise process adjustments and efficiency. Usually, gas chromatography (GC) or high-performance liquid chromatography (HPLC) are the methods used for bioproduct quantification, but these are hazardous and labor-intensive techniques. In this context, quantitative image analysis (QIA) emerges as a rapid and non-hazardous alternative for bioproducts quantification. The present work investigates the application of QIA for the simultaneous quantification of PHA and TAG in a mixed microbial culture fed with used cooking oil (UCO). Three stains were evaluated: Sudan Black B (SBB), Nile Blue A (NBA), and BODIPY. The data obtained from the images acquired were processed using multivariate statistical methods, specifically Partial Least Squares (PLS) and Multilinear Regression (MLR). Overall, SBB tended to show comparatively better predictive performance, particularly for PHA, while PLS models generally demonstrated more favourable performance than MLR. However, none of the tested stains were effective in quantifying TAG, likely due to the concentration of data around a limited range, which hindered the model´s ability to predict this bioproduct. Simultaneous quantification of both products (PHA+TAG) resulted in moderate model performance (R2 ≈ 0.57–0.89), without improving the predictive accuracy of PHA quantification alone. These findings support the potential of image-based techniques for intracellular bioproduct quantification, while also highlighting the need for a larger and more diverse dataset to enhance model prediction accuracy and robustness.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Enrichment of a mixed microbial culture for PHA production with used cooking oil as substrate

  • Ucha Muñoz, Carlota
  • Correa Galeote, David
  • Val del Río, Ángeles
  • Pedrouso Fuentes, Alba
  • Mosquera Corral, Anuska
The synthesis of polyhydroxyalkanoates (PHA) by a mixed microbial culture (MMC) employing used cooking oil (UCO) as substrate represents a promising bioprocess for organic wastes valorisation. In this study, MMC enrichment in a sequencing batch reactor (SBR) was investigated using UCO without pretreatment as the sole carbon source. Two SBRs (SBR1 and SBR2) were operated under a feast-famine regime with uncoupled carbon and nitrogen supply, differing in the timing of the biomass withdrawal and nutrient filling. In SBR1, with effluent withdrawal at the end of the feast phase, better poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) accumulation was achieved (average values of 4.2 ± 1.6 wt. %, maximum of 19.9 wt. %) compared to SBR2, with withdrawal at the end of the famine phase (average values of 2.7 ± 1.1 wt. %, maximum of 5.2 wt. %). The highest PHBV accumulation in SBR1 was obtained at a COD/N ratio of 46 g/g, with an active biomass concentration of approximately 1 g VSS/L. Additionally, a single UCO pulse enhanced substrate hydrolysis and consumption compared to multiple pulses. Microbial community analysis revealed the enrichment of bacterial OTUs with PHA accumulation capacity related to Azospirillum, Acinetobacter, Gordonia, Burkholderia, and Bacillus. Among fungal OTUs, Geotrichum, Meyerozyma, and Pascua were the most abundant. Multivariate statistical analysis indicated that the synergistic interaction of Burkholderia and Chitinophaga played a crucial role in achieving the highest PHBV accumulation levels
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Prospective LCA of future pathways for used cooking oil valorisation: advancing renewable energy and sustainable materials

  • Vázquez Vázquez, Brais
  • Hospido Quintana, Almudena
  • Val del Río, Ángeles
  • Janssen, Matty
Purpose This study aims to evaluate the environmental performance of different valorisation pathways for used cooking oil (UCO). By applying prospective life cycle assessment (pLCA), conventional energy-based routes, such as biodiesel production, cogeneration, and incineration; were compared with novel materials routes such as bioplastic production using PRETENACC technology (TRL = 5). The analysis focuses on identifying the most environmentally favourable long-term option, emphasizing how increasing the market share of bioplastics could shape future UCO recovery strategies. Methods As the first step of the pLCA, more than 30 parameters related to UCO valorization were identified together with stakeholders with expertise in political, environmental, social, technological, economic and legal (PESTEL) fields. These were used to generate five future scenarios for 2030, 2040 and 2050. Life cycle inventories were developed using experimental and literature data on bioplastics, as well as data from the literature on energy pathways, covering the system boundaries from cradle to grave. The background processes were futurised with Ecoinvent 3.9.1 and scenarios based on IMAGE (SSP2-base and SSP2-RCP2.6). Environmental impacts were quantified using the intermediate categories of ReCiPe 2016, supplemented with indicators of the physical effects of microplastics on terrestrial and aquatic biota. Results and discussion The pLCA results show that scenario 1 (0% market share for bioplastics) has the lowest initial impacts (2030). Nevertheless, over time (2040 and 2050), only the environmental burden of bioplastics decreases, driven by cleaner electricity production and better waste sorting. Climate change impacts are largely influenced by bioplastics production and end-of-life (EoL) management, with mixed waste disposal accounting for up to 26% of the total impact in 2030, decreasing towards 2050. Terrestrial acidification is dominated by the bioplastics production. Particle formation reflects combustion-related trends, while microplastic impacts depend on poor management, which mainly affects marine environments as the final sink. Energy recovery pathways show limited potential for improvement, while bioplastics offer increasing long-term environmental benefits if appropriate EoL pathways are followed. Conclusions This study demonstrates that while energy recovery pathways, such as biodiesel, cogeneration, and incineration, contribute marginally to long-term environmental improvements, material valorisation through bioplastics offers a promising and more sustainable UCO management route. Environmental performance of bioplastics is highly dependent on EoL management and the polymer composition. Enhancing waste sorting practices and adopting lower-impact polymer blends are critical to maximizing benefits, enabling a significant reduction in the impacts associated with bioplastics.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Rapid start-up and stable maintenance of the mainstream nitritation process based on the accumulation of free nitrous acid in a pilot-scale two-stage nitritation-anammox system

  • Pedrouso Fuentes, Alba
  • Morales, Nicolás
  • Rodelas González, Belén
  • Correa Galeote, David
  • Val del Río, Ángeles
  • Campos, José Luis
  • Vázquez Padín, José Ramón
  • Mosquera Corral, Anuska
Two-stage partial nitritation (PN) and anammox (AMX) systems showed promising results for applying autotrophic nitrogen removal under mainstream conditions. In this study, a pilot-scale (600 L per reactor) two-stage PN/AMX system was installed in a municipal wastewater treatment plant (WWTP) provided with a high-rate activated sludge (HRAS) system for organic carbon removal. The PN/AMX system was operated without temperature control (ranging from 11 to 28 °C) and was subjected to the same variations in wastewater characteristics as the WWTP (22 to 63 mg NH4+- N/L). The developed strategy is simple, does not require the addition of chemicals and is characterised by short start-up periods. The PN process was established by applying a high hydraulic load and maintained by in situ accumulated free nitrous acid (FNA) of 0.015–0.2 mg HNO2-N/L. Based on pH value, a controlled aeration strategy was applied to achieve the target nitrite to ammonium ratio in the effluent (1.1 g NO2–-N/g NH4+-N) to feed the AMX reactor. Although NOB were not fully washed out from the system, nitrite accumulation remained (>99 %) stable with no evidence of NOB activity. In the AMX reactor, an overall nitrogen removal efficiency of 80 % was achieved. Regarding effluent quality, 12 ± 3 mg TN/L was obtained, but 5 mg NO3–-N/L was already in the HRAS effluent. The relative abundance of NOB showed a strong negative correlation with the FNA concentration, providing a good strategy for establishing PN under mainstream conditions
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Integrating life cycle assessment and environmental life cycle costing to evaluate used cooking oil valorisation routes

  • Vázquez Vázquez, Brais
  • Val del Río, Ángeles
  • Mosquera Corral, Anuska
  • Hospido Quintana, Almudena
Used cooking oil (UCO) is an abundant feedstock to produce renewable energy and bio-based materials. However, valorisation routes differ substantially in environmental performance and economic viability. This study identifies the UCO valorisation route offering the best overall performance when both dimensions are assessed simultaneously, supporting more sustainable waste management strategies. An integrated environmental and techno-economic assessment was conducted for five routes: biodiesel production via transesterification (FAME) and hydrotreatment (HVO), combined heat and power (CHP), incineration, and polyhydroxyalkanoate (PHA)-based bioplastics (two process configurations). A gate-to-grave life cycle assessment (LCA) was coupled with environmental life cycle costing (eLCC) to internalise environmental externalities within the economic evaluation. Bioplastics and biodiesel (FAME) dominate the largest number of environmental impact categories, while CHP and incineration exhibit the lowest overall burdens. In terms of global warming, bioplastic routes display the lowest impacts (1.92-2.23 kg CO2-eq/kg UCO), whereas CHP, incineration and biodiesel routes exceed 3 kg CO2-eq/kg UCO due to combustion-related emissions. Microplastic impacts, despite affecting less than 5% of the material, are particularly relevant in the aquatic compartment. Economically, biodiesel (FAME) and incineration are the most favourable when only process costs are considered (1.21 €/kg biodiesel and 1.17 €/kg UCO). When environmental externalities are internalised, minimum selling prices increase substantially (up to 2.21 €/kg biodiesel), reversing the ranking. Overall, no route is clearly superior when environmental and economic performance are considered together, highlighting the need for policies and industrial strategies that account for environmental externalities to avoid burden shifting and promote sustainable UCO management pathways
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Terrestrial characterization factors for bio- and fossil-based plastics: microplastics ingestion and additives release

  • Vázquez Vázquez, Brais
  • Lazzari, Massimo
  • Hospido Quintana, Almudena
Only a few works have contributed to quantifying the potential impacts of mismanaged plastics at the end-of-life stage. The MarILCA working group has developed characterization factors (CFs) to include the aquatic compartment, however, the terrestrial compartment remains a methodological gap. This work contributes to the quantification of the potential impacts of polypropylene (PP) and low-density polyethylene (LDPE) as well as their potential market substitutes plastic biopolymers (BPs) (PHA- and PLA-based) in the terrestrial compartment. Emission-based CFs have been developed to quantify their impacts through physical effects on biota related to microplastic ingestion, and ecotoxicological effects due to additives release. Fate factors (FFs) were derived from Plastic Footprint Network data and studies on accelerated photooxidation, the primary degradation pathway in the terrestrial compartment. Effect factors (EFs) were developed by the USEtox recommendations based on literature data on the physical and ecotoxicological impacts related to microplastics ingestion and additives release. An exposure factor (XF) of 1 was applied, as the CFs integrate potential impacts without distinguishing between short- and long-term effects. The study found that additives pose a greater environmental risk than microplastics ingestion, with CFs 3 to 4 orders of magnitude higher in the terrestrial compartment and even higher in the aquatic compartment. It is, therefore, essential to consider both the terrestrial and aquatic compartments to understand the impact of plastic pollution comprehensively. Finally, the study also found that the CFs of BPs are close to petrochemical plastics, underling the importance of proper waste management for the environmental performance of BPs.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Metaproteomic insights into salinity’s impact on carbon assimilation and polyhydroxyalkanoate production in mixed cultures of purple phototrophic bacteria

  • Lorenzo Llarena, José Ramón
  • Trueba Santiso, Alba María
  • Mosquera Corral, Anuska
  • Pedrouso Fuentes, Alba
Purple phototrophic bacteria (PPB) are metabolically versatile microorganisms capable of adapting to diverse environmental conditions in biotechnological applications, including polyhydroxyalkanoate (PHA) production. This study explores how salinity drives metabolic specialization by comparing non-saline (R-NS) and saline-adapted (R-S) cultures fed with acetic acid. R-S accumulated significantly more PHA (up to 42 dw%) than in R-NS (up to 11%). Proteomic analyses revealed distinct communities and carbon assimilation pathways. R-NS, dominated by Rhodopseudomonas, relied on the glyoxylate cycle. While R-S, dominated by Cereibacter, employed the ethylmalonyl-CoA (EMC) pathway. EMC may provide proton motive force to support osmotic regulation in R-S, with excess reducing power equivalents stored as PHA. This is supported by glutamate synthesis overexpression and detection of osmolyte transporters. These findings underscore the adaptability of PPB to salinity, the role of reducing power in saline stress response, and suggest that the EMC pathway can sustain PHA biosynthesis even with carboxylation steps.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Raw used cooking oil valorization into polyhydroxyalkanoates by mixed microbial cultures: evaluation of one- and two-unit configuration

  • Ucha Muñoz, Carlota
  • Martínez Rey, Sara
  • Correa Galeote, David
  • Pedrouso Fuentes, Alba
  • Mosquera Corral, Anuska
  • Val del Río, Ángeles
The production of polyhydroxyalkanoates with untreated used cooking oil (UCO) as substrate represents an interesting strategy to valorize this residue into a value-added product. Three sequencing batch reactors (R1, R2, and RA) were operated, using mixed microbial cultures (MMCs) fed with raw UCO. R1 and R2 operated as enrichment units, with withdrawal at the end of the feast and famine phases, respectively. Enrichment was achieved in both within 30 days, reaching similar accumulations of the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) (17.76 wt. % in R1 and 12.47 wt. % in R2). To improve process stability and reduce chemical consumption for pH control, urea was evaluated as nitrogen source, resulting in a reactor less dependent on pH control and increasing PHBV content from 16.7 to 25.7 wt. %. Then, the accumulation unit (RA) was operated in series with R1 to evaluate the maximum PHBV production of the biomass and compare the one-unit (R1) and two-unit (R1 + RA) configurations. Different hydraulic retention times (HRTs) were studied for the one-unit (24 and 48 h) and the two-unit (48 and 96 h) configurations. The best overall performance was observed at an HRT of 48 h in both cases, with similar accumulations (44.8–49.1 wt. % PHBV), yields (230–250 g PHBV/kg UCO) and productivities (0.010–0.013 g PHBV/(L·h)), showing that the one-unit was the best strategy for its operational simplicity. These results demonstrate the feasibility of enriching MMCs to produce PHBV using raw UCO, highlighting the potential of one-unit configuration to perform enrichment and accumulation steps in the same reactor.