Pasar al contenido principal

MATERIALES DUROS 2D PARA LA PREPARACION DE SOPORTES CELULARES 3D, BLANDOS E INTELIGENTES

PID2020-113080RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Prato Tour on Carbon Nanotubes: Raman Insights

  • Lucío, María Isabel|||0000-0001-7404-352X
  • Giacalone, Francesco
  • La Parola, Valeria
  • Gámez-Valenzuela, Sergio
  • Muñoz-Alba, Fernando
  • Ruiz Delgado, M. Carmen
  • Herrero, M. Antonia
  • Vázquez, Ester
[EN] The functionalisation of carbon nanotubes has been instrumental in broadening its application field, allowing especially its use in biological studies. Although numerous covalent and non-covalent functionalisation methods have been described, the characterisation of the final materials has always been an added challenge. Among the various techniques available, Raman spectroscopy is one of the most widely used to determine the covalent functionalisation of these species. However, Raman spectroscopy is not a quantitative technique, and no studies are reported comparing its performance when the same number of functional groups are added but using completely different reactions. In this work, we have experimentally and theoretically studied the functionalisation of carbon nanotubes using two of the most commonly used reactions: 1,3-dipolar cycloaddition of azomethylene ylides and diazonium-based radical addition. The number of groups introduced onto the tubes by these reactions has been determined by different characterisation techniques. The results of this study support the idea that data obtained by Raman spectra are only helpful for comparing functionalisations produced using the same type of reaction. However, they should be carefully analysed when comparing functionalisations produced using different reaction types., The authors acknowledge financial support from the Spanish government (project PID2020-113080RB-I00) and the Junta de Comunidades de Castilla-La Mancha (project SBPLY/21/180501/000135/1). This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by the Junta de Comunidades de Castilla-La Mancha. The work at the University of Malaga was funded by the MICINN (PID202-139548NB-I00) and by the Junta de Andalucia (P18-FR-4559) projects. The authors thankfully acknowledge the computer resources, technical expertise, and assistance provided by the SCBI (Supercomputing and Bioinformatics) centre of the University of Malaga. M. I. L. acknowledges her Juan de la Cierva Incorporacion grant (IJC 2018-035355-I) funded by MCIN/AEI/10.13039/501100011033. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Screening the micronucleus assay for reliable estimation of the genotoxicity of graphene and other 2D materials

  • García-Carpintero, S.
  • Jehová González, V.
  • Frontiñán-Rubio, Javier
  • Esteban-Arranz, Adrián
  • Vázquez, E.
  • Durán-Prado, M.
In recent years, the genotoxicity of graphene-related materials (GRMs) and other 2D materials has been evaluated using different models to ensure their safety. The OECD TG 487 in vitro micronucleus (MNu) test is one of the most widely used methods to assess the genotoxicity of nanomaterials (NMs). However, the nature of NMs interferes with the standard MNu process, thus requiring an adaptation to assess this kind of compound. Improvements have been incorporated into the standard method to solve the interferences and build a modified, reliable protocol that can be used to test NMs further. The main interference observed was NM agglomeration, which hinders the correct visualization of micronuclei. Addition of 10% dextran to the culture medium reduced agglomeration but interfered with toxicity by reducing NM-induced cell death. Mechanical shaking during cell incubation with NMs minimized the size and number of agglomerates and avoided their rapid sedimentation and deposition onto cells, thus allowing accurate visualization of the micronucleate cells. Once set up, the proposed method was tested with graphene oxide (GO), few-layer graphene (FLG), molybdenum disulfide (MoS), and boron nitride (hBN). The novel in vitro MNu test for NMs showed that GO (0.05–5 μg/ml) and hBN (0.05 μg/ml) were genotoxic at sublethal doses, inducing irreparable chromosomal damage. With these adaptations, the modified in vitro MNu test is strongly recommended to test the genotoxicity of NMs. The results obtained with this protocol indicate that GO and hBN represent a risk that should be considered., Financial support from the 881603-Graphene Core 3 European Union (Flagship project), the Spanish Ministerio de Ciencia e Innovaci´on, Project PID2020-113080RB-I00, and Advanced Materials Programme (Planes Complementarios) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Environmental and Health Impacts of Graphene and Other Two-Dimensional Materials: A Graphene Flagship Perspective

  • Lin, Hazel
  • Buerki-Thurnherr, Tina
  • Kaur, Jasreen
  • Wick, Peter
  • Pelin, Marco
  • Tubaro, Aurelia
  • Candotto Carniel, F.
  • Tretiach, M.
  • Flahaut, E.
  • Iglesias, Daniel
  • Vázquez, Ester
  • Cellot, Giada
  • Ballerini, Laura
  • Castagnola, Valentina
  • Benfenati, Fabio
  • Armirotti, Andrea
  • Sallustrau, Antoine
  • Taran, Frédéric
  • Keck, Mathilde
  • Bussy, Cyrill
  • Vranic, Sandra
  • Kostarelos, Kostas
  • Connoly, Mona
  • Navas, José María
  • Mouchet, F.
  • Gauthier, L.
  • Baker, James
  • Suarez-Merino, Blanca
  • Kanerva, Tomi
  • Prato, Maurizio
  • Fadeel, Bengt
  • Bianco, Alberto
57 Pág., Two-dimensional (2D) materials have attracted tremendous interest ever since the isolation of atomically thin sheets of graphene in 2004 due to the specific and versatile properties of these materials. However, the increasing production and use of 2D materials necessitate a thorough evaluation of the potential impact on human health and the environment. Furthermore, harmonized test protocols are needed with which to assess the safety of 2D materials. The Graphene Flagship project (2013-2023), funded by the European Commission, addressed the identification of the possible hazard of graphene-based materials as well as emerging 2D materials including transition metal dichalcogenides, hexagonal boron nitride, and others. Additionally, so-called green chemistry approaches were explored to achieve the goal of a safe and sustainable production and use of this fascinating family of nanomaterials. The present review provides a compact survey of the findings and the lessons learned in the Graphene Flagship., The authors are supported by the European Commission through the Graphene Flagship Project (grant agreement no. 881603) (work package on Health & Environment, and SafeGraph SH11 spearhead project), and the Centre National de la Recherche Scientifique (CNRS) (A.B., E.F.), the Interdisciplinary Thematic Institute SysChem, through the IdEx Unistra (ANR-10-IDEX-0002) within the French Investments for the Future Program (A.B.), by the Commissariat à l’Energie Atomique et aux Energies Alternatives (A.S., F.T., M.K.), and from the Swiss National Science Foundation (grant no. 310030_169207) (T.B., P.W.). M.C. had a contract in the framework of the project 2018-T2/AMB-11392 granted and funded by the Community of Madrid. This study forms part of the Advanced Materials program and was supported by MCIN (project PID2020-113080RB-I00) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by the Junta de Comunidades de Castilla-La Mancha (SBPLY/21/180501/000176) (E.V). Parts of some figures were created with BioRender.com., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A biomimetic follicle-based design for engineering reproductive technologies

  • Sánchez-Ajofrín, Irene
  • Andreu, Carlos M.
  • Galindo, Josué M.
  • San-Millán, Irene
  • Merino, Sonia
  • Soler, Ana J.
  • Herrero, M. Antonia
  • Vázquez, Ester
In the field of assisted reproductive technologies, oocyte in vitro maturation (IVM) has emerged as a potential alternative to overcome the limitations associated with standard ovarian stimulation treatments. However, current IVM protocols lack standardization and yield oocytes of inferior quality compared to those matured in vivo. To address this issue, novel biomaterials like hydrogels offer distinct advantages in cell culture by providing a 3D cellular environment and facilitating easy adjustment and characterization of mechanical properties, such as hydrogel stiffness. Herein, a novel and reusable bilayer hydrogel system is presented that accurately mimics the mechanical properties of the microenvironment surrounding oocyte maturation. The system comprises an outer layer fabricated from either a 3D-printed synthetic polymer (2-vinyl-4,6-diamino-1,3,5-triazine, (VDT)) or a natural polymer (chitosan), along with an inner layer composed of alginate. By faithfully replicating the mechanical properties of native tissue within a 3D culture environment, this system significantly improves the quality and developmental capacity of oocytes, thus resulting in successful embryo development. Overall, this innovative system holds great potential for future medical research and applications in cell culture, thus representing a significant advancement in assisted reproductive technologies., The authors acknowledge financial support from the Spanish government (project PID2020-113080RB-I00 and project PID2021-126988OB-I00), and the Junta de Comunidades de Castilla-La Mancha (projects SBPL4/17/180501/000204 and SBPLY/21/180501/000135/1). This study forms part of the Advanced Materials program and was supported by the MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and the Junta de Comunidades de Castilla-La Mancha. I.S.-A. received a postdoctoral contract, 2021-POST-32002, from the “Plan Propio de la UCLM” co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MoS2 2D materials induce spinal cord neuroinflammation and neurotoxicity affecting locomotor performance in zebrafish

  • Di Mauro, Giuseppe
  • González, Viviana Jehová
  • Bambini, Francesco.
  • Camarda, Silvia
  • Prado, Eduardo.
  • Holgado-Vázquez, Juan Pedro
  • Vázquez, Ester
  • Ballerini, Laura
  • Cellot, Giada.
Chemicals and CAS Registry Numbers disulfide 16734-12-6 molybdenum 7439-98-7 Disulfides Molybdenum molybdenum disulfide, MoS nanosheets belong to an emerging family of nanomaterials named bidimensional transition metal dichalcogenides (2D TMDCs). The use of such promising materials, featuring outstanding chemical and physical properties, is expected to increase in several fields of science and technology, with an enhanced risk of environmental dispersion and associated wildlife and human exposures. In this framework, the assessment of MoS nanosheets toxicity is instrumental to safe industrial developments. Currently, the impact of the nanomaterial on the nervous tissue is unexplored. In this work, we use as in vivo experimental model the early-stage zebrafish, to investigate whether mechano-chemically exfoliated MoS nanosheets reach and affect, when added in the behavioral ambient, the nervous system. By high throughput screening of zebrafish larvae locomotor behavioral changes upon exposure to MoS nanosheets and whole organism live imaging of spinal neuronal and glial cell calcium activity, we report that sub-acute and prolonged ambient exposures to MoS nanosheets elicit locomotor abnormalities, dependent on dose and observation time. While 25 μg mL concentration treatments exerted transient effects, 50 μg mL ones induced long-lasting changes, correlated to neuroinflammation-driven alterations in the spinal cord, such as astrogliosis, glial intracellular calcium dysregulation, neuronal hyperactivity and motor axons retraction. By combining integrated technological approaches to zebrafish, we described that MoS 2D nanomaterials can reach, upon water (i.e. ambient) exposure, the nervous system of larvae, resulting in a direct neurological damage., This work received funding from the European Union Horizon 2020 Research and Innovation Programme under grant agreement no. GrapheneCore3 (881603). This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1), Junta de Comunidades de Castilla-La Mancha and project PID2020-113080RB-I00., Peer reviewed