Pasar al contenido principal

INGENIERA QUIMICA DEL TRANSPORTE DE CALOR EN CONTACTOS MOLECULARES: DEL REGIMEN BALISTICO HASTA EL REGIMEN DIFUSIVO.

PID2020-113722RJ-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phonon interference in single-molecule junctions

  • Yelishala, Sai C
  • Zhu, Yunxuan
  • Martínez, P. M.
  • Chen, Hongxuan
  • Habibi, Mohammad
  • Prampolini, Giacomo
  • Cuevas, Juan Carlos
  • Zhang, Wei
  • Vilhena, J. G.
  • Cui, Longji
Wave interference allows unprecedented coherent control of various physical properties and has been widely studied in electronic and photonic materials. However, the interference of phonons, or thermal vibrations, central to understanding coherent thermal transport in all electrically insulating materials, has been poorly characterized due to experimental challenges. Here we report the observation of phonon interference at room temperature in molecular-scale junctions. This is enabled by custom-developed scanning thermal probes with combined high stability and sensitivity, allowing quantification of heat flow through molecular junctions one molecule at a time. Using isomers of oligo(phenylene ethynylene)3 with either para- or meta-connected centre rings, our experiments revealed a remarkable reduction in thermal conductance in meta-conformations. Quantum-mechanically accurate molecular dynamics simulations show that this difference arises from the destructive interference of phonons through the molecular backbone. This work opens opportunities for studying numerous wave-driven material properties of phonons down to the single-molecule level that have remained experimentally inaccessible., L.C. acknowledges support from the National Science Foundation (award number 2239004) and the College of Engineering and Applied Science at University of Colorado Boulder. We thank S. Bilan for technical support. P.M.M. acknowledges support from the Spanish Ministry of Education and Professional Formation (award number FPU21/06224). J.C.C. thanks the Spanish Ministry of Science and Innovation (award number PID2020-114880GB- I00) and the ‘Maria de Maeztu’ Programme for Units of Excellence in R&D (award number CEX2023-001316-M). J.G.V. acknowledges the Spanish CM ‘Talento Program’ (award number 2020-T1/ND-20306) and the Spanish Ministerio de Ciencia e Innovacion (award numbers PID2020-113722RJ-I00, TED2021-132219A-I00 and CNS2023-144011). This work utilized research computing resources at Picasso, Finisterrae3 (award numbers RES-FI-2023-0031 and RES-FI-2023-2-0006) and at the University of Colorado Boulder Research Computing, which is supported by the NSF (award numbers ACI-1532235 and ACI-1532236), the University of Colorado Boulder and Colorado State University., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heat transfer in metallic nanometre-sized gaps

  • López-Nebreda, Rubén
  • Mateos-López, Oscar
  • Martínez-Martínez, Pablo
  • García-Esteban, Juan José
  • Ibabe, Ángel
  • Roca-Giménez, Nuria
  • Segovia, Pilar
  • Michel, Enrique Garcia
  • Lee, Eduardo J H
  • Vilhena, J. G.
  • Cuevas, Juan Carlos
  • Agraït, Nicolás
Heat transfer in nanoscale gaps is of key relevance for a variety of technologies. Recent experiments have reported contradictory results shedding doubts about the fundamental mechanisms for heat exchange when bodies are separated by nanometre-sized gaps. Here, we aim at resolving this controversy by measuring the thermal conductance of gold atomic-sized contacts with a custom-designed scanning tunnelling microscope that incorporates a novel thermal probe. This technique enables the measurement of thermal and electrical conductance in different transport regimes. When the electrodes are separated by a nanometre-sized gap, we observe thermal signals whose magnitude and gap size dependence cannot be explained with standard heat transfer mechanisms. With the help of non-equilibrium molecular dynamic simulations, we elucidate that these anomalous signals are due to the thermal conduction through water menisci that form between tip and sample under customary operation conditions. Our work resolves this fundamental puzzle and suggests avenues for the investigation of heat conduction in atomic and molecular junctions., We acknowledge the parallel work performed by A. Rajabpour and S. Merabia on heat transport on water menisci. O.M.L., J.C.C., N.A. and E.J.H.L. thank the Spanish Ministry of Science and Innovation for financial support through Grant No. PID2020-114880GB-I00, the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M), and Project for Scientific Infrastructures EQC2021-007091-P. P.M.M. and J.J.G.E. were supported by the Spanish Ministry of Education and Professional Formation (Grant No. FPU21/06224) and the Spanish Ministry of Science and Innovation (Grant No. FPU19/05281), respectively. J.G.V., O.M.L. and P.M.M. acknowledge Spanish CM “Talento Program” (No. 2020-T1/ND-20306), and Spanish Ministerio de Ciencia e Innovacion (No. PID2020-113722RJ-I00, TED2021-132219A-I00, and CNS2023-144011). The authors thankfully acknowledge RES resources provided by Universidad de Málaga and in Picasso and CESGA in Finisterrae3 via research projects [FI-2023-3-0031, FI-2024-1-0014, FI-2024-2-0041]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-Surface Synthesis and Cryogenic Exfoliation of Sterically Frustrated Atropisomers

  • D'Astolfo, Philipp
  • Vilhena, J. G
  • Rothenbühler, Simon
  • Drechsel, Carl
  • Gutiérrez-Varela, Oscar
  • Häner, Robert
  • Decurtins, Silvio
  • Liu, Shi-Xia
  • Prampolini, Giacomo
  • Pawlak, Rémy
  • Meyer, Ernst
On-surface synthesis provides exceptional control over nanostructure and material composition, enabling the creation of molecular compounds that are difficult or impossible to obtain with other synthesis methods. In this work, we demonstrate the possibility of synthesizing atropisomeric molecules made of chains of polyaromatic hydrocarbon units via on-surface synthesis. Scanning probe microscopy reveals that molecules adsorbed on Au(111) surfaces adopt a planar structure, with adjacent monomeric units aligning either in parallel or antiparallel configurations, influencing the alignment of the molecule on the surface. Cryo-force spectroscopy peeling experiments show that metastable conformers can be mechanically stabilized during the lifting-redeposition process of the polymer from the surface. In this process, periodic drops in frequency shift are observed, corresponding to monomer detachment-readsorption. Interestingly, this periodicity is independent of the parallel/antiparallel configuration but is counterintuitively smaller than the monomer size. Molecular dynamics simulations relate this effective reduction in unit length to a tethering effect between the chain and the surface. This, in turn, allowed us to test and validate Silva's analytical phenomenological power law model for peeling. Our findings not only provide a method for studying the elusive class 1 atropisomeric molecules but also offer deeper insight into the peeling phenomenon at the nanoscale., We gratefully acknowledge the financial support by the Projects FET-Open Program “Quantum-Limited Atomic Force Microscopy” (No. 828966), the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program (No. 834402) as well as the Swiss National Science Foundation (SNSF grants 200021_204053, 200021_228403, and CRSII5_213533), the Swiss Nanoscience Institute (SNI), the Werner Siemens Foundation (WSS), and the University of Basel. The COST Action MP1303 is gratefully acknowledged. J.G.V. acknowledges the assistance and computing resources from Red Española de Supercomputación (RES-BSC) HPC computational facilities, funding from a Marie Sklodowska-Curie Fellowship within the Horizons 2020 framework (DLV-795286), the Swiss National Science Foundation (grant number CRSK-2 190731/1), the Spanish CM “Talento Program” (Project No. 2020-T1/ND-20306), and the Spanish Ministerio de Ciencia e Innovación (Grant Nos. PID2020-113722RJ-I00, TED2021-132219A-I00, and CNS2023-144011). G.P. thanks the financial support from ICSC - Centro Nazionale di Ricerca in High-Performance Computing, Big Data and Quantum Computing, funded by European Union - NextGenerationEU - PNRR, Missione 4 Componente 2 Investimento 1.4., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

JOYCE3.0: A General Protocol for the Specific Parametrization of Accurate Intramolecular Quantum Mechanically Derived Force Fields

  • Giannini, Samuele
  • Martínez-Martínez, Pablo
  • Semmeq, Abderrahmane
  • Galvez, J Pablo
  • Piras, Anna
  • Landi, Alessandro
  • Padula, Daniele
  • Vilhena, J. G.
  • Cerezo, Javier
  • Prampolini, Giacomo
While the intrinsically multiscale nature of most advanced materials necessitates the use of cost-effective computational models based on classical physics, a reliable description of the structure and dynamics of their components often requires a quantum-mechanical treatment. In this work, we present JOYCE3.0, a software package for the parametrization of accurate, quantum-mechanically derived force fields (QMD-FFs). Since its original release, the code has been extensively automated and expanded, with all novel implementations thoroughly discussed. To illustrate its general applicability, QMD-FFs are parametrized for seven benchmark cases, encompassing molecules with diverse structures and properties. These range from exotic stiff scaffolds, flexible polymeric chains, and polyenes of biological interest to transition-metal complexes. On the one hand, JOYCE3.0 FFs consistently outperform available general-purpose descriptions, achieving excellent agreement with higher-level theoretical methods or available experimental validation data. On the other hand, the remarkable accuracy found in the description of the molecular structures extends to electronic excited states, enabling the integration of the JOYCE3.0 QMD-FFs into multilevel protocols aimed at reliably predicting selected properties and spectral line shapes in advanced optoelectronic materials. The high quality of the results─spanning molecular structures, condensed-phase properties, and spectroscopic features─in combination with the enhanced interface with popular quantum-mechanical codes and molecular dynamics engines, as well as its applicability to chemically diverse species, strongly suggests that JOYCE3.0 could play a pivotal role in the rational design of functionalized materials and heterogeneous systems., G.P., S.G., A.P., A.S. and D.P. thank the financial support from ICSC – Centro Nazionale di Ricerca in High Performance Computing, Big Data and Quantum Computing, funded by European Union – NextGenerationEU – PNRR, Missione 4 Componente 2 Investimento 1.4. J.C. and J.P.G. thank the Spanish Ministerio de Ciencia e Innovación, Project PID2023-151719NAI00, for financial support. J.P.G. also thanks Universidad de Murcia for a predoctoral fellowship. D.P. gratefully acknowledges funding from the Italian Ministry of University and Research (MUR, PRIN grant 2022CXHY3A) and computational resources kindly provided by Universit`a di Siena (hpc@dbcf). A.L. gratefully acknowledges funding from the Italian Ministry of University and Research (MUR, PRIN grant 2022XSC9P5). Dr. Fabrizio Santoro is gratefully acknowledged by all authors for the many useful discussions, the continuous support and stimulating ideas. P.M.M. and J.G.V acknowledge the assistance and computing resources from Red Española de Supercomputaci´on (RES-BSC) HPC computational facilities, funding from the Spanish CM “Talento Program” (Project No. 2020-T1/ND-20306), the Spanish Ministerio de Ciencia e Innovaci´on (Grant Nos. PID2020-113722RJ-I00, TED2021-132219A-I00 and CNS2023-144011) and the Spanish Ministerio de Educación y y Formación Profesional (Grant No. FPU21/06224)., Peer reviewed