Pasar al contenido principal

ARQUITECTURAS 5D PARA MEDICINA REGENERATIVA Y TERAPIA LOCALIZADA

PID2020-113881RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Niosomes-based gene delivery systems for effective transfection of human mesenchymal stem cells

  • Carballo Pedrares, Natalia
  • Kattar, Axel
  • Concheiro Nine, Ángel Joaquín
  • Álvarez Lorenzo, Carmen
  • Rey Rico, Ana
Gene transfer to mesenchymal stem cells (MSCs) has arisen as a powerful approach to increase the therapeutic potential of this effective cell population. Over recent years, niosomes have emerged as self-assembled carriers with promising performance for gene delivery. The aim of our work was to develop effective niosomes-based DNA delivery platforms for targeting MSCs. Niosomes based on 1,2-di-O-octadecenyl-3-trimethylammonium propane (DOTMA; 0, 7 or 15%) as cationic lipid, cholesterol as helper lipid, and polysorbate 60 as non-ionic surfactant, were prepared using a reverse phase evaporation technique. Niosomes dispersions (filtered or not) and their corresponding nioplexes with a lacZ plasmid were characterized in terms of size, charge, protection, and complexation abilities. DOTMA concentration had a large influence on the physicochemical properties of resulting nioplexes. Transfection efficiency and cytotoxic profiles were assessed in two immortalized cell lines of MSCs. Niosomes formulated with 15% DOTMA provided the highest values of β-galactosidase activity, being similar to those achieved with Lipofectamine®, but showed less cytotoxicity. Filtration of niosomes dispersions before adding to the cells resulted in a loss of their biological activities. Storage of niosomes formulations (for 30 days at room temperature) caused minor modification of their physicochemical properties but also attenuated the transfection capability of the nioplexes. Differently, addition of the lysosomotropic agent sucrose into the culture medium during transfection or to the formulation itself improved the transfection performance of non-filtered niosomes. Indeed, steam heat-sterilized niosomes prepared in sucrose medium demonstrated transfection capability
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Contact lenses that transform gold into nanoparticles for prophylaxis of light-related events and photothermal therapy

  • Álvarez Lorenzo, Carmen
  • Vivero López, María
  • Concheiro Nine, Ángel Joaquín
This work describes for first time how anisotropic gold nanoparticles (AuNPs) can be spontaneously formed inside preformed contact lenses (CLs) avoiding the use of additional reductant agents (reagent-free) through a precise tunning of the monomeric composition, the saline concentration, and the application of steam heat sterilization. Protocols to generate AuNPs in solution using inorganic or small organic reductants are widely available. Differently, gold precursors interactions with polymer networks have been overlooked and, thus, the interest of chemically cross-linked hydrogels as organic reductants is still to be elucidated. In the ocular field, incorporation of AuNPs to CLs may expand their applications in prophylaxis, therapy and diagnosis. To carry out the work, a variety of hydrogels and commercially available CLs were incubated with gold salt solution without any other chemical reagent. AuNPs formation was monitored by changes in localized surface plasmon resonance (LSPR) bands and quantifying the gold sorbed. Only silicone hydrogels induced AuNPs formation at room temperature in few days; methacrylic acid red-shifted the LSPR band (550–600 nm), while monomers bearing F hindered the reduction. Storage of hydrogels in the gold precursor solution allowed a gradual formation of anisotropic AuNPs, which could be stopped at any time by washing the hydrogel with water. The developed CLs behave as efficient filters against highly penetrant light and also exhibit photoresponsiveness as demonstrated as rapid (10 s), focused mild hyperthermia when irradiated with green, red and NIR lasers
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Supercritical fluid (SCF)-assisted preparation of cyclodextrin-based poly(pseudo)rotaxanes for transdermal purposes

  • Cardoso, Gleidson
  • García González, Carlos A.
  • Santos Rosales, Víctor
  • Taveira, Stephania Fleury
  • Cunha-Filho, Marcilio
  • Concheiro Nine, Ángel Joaquín
  • Álvarez Lorenzo, Carmen
  • Marreto, Ricardo Neves
This study aims to investigate the effect of the preparation of solid dispersions using supercritical CO2 (scCO2) on the physicochemical properties and the performance of supramolecular gels based on polymer-cyclodextrin (CD) interactions (named poly(pseudo)rotaxanes, PPR) envisaging a transdermal administration. Solid dispersions containing Soluplus®, the antihypertensive drug carvedilol (CAR), and CD (αCD or HPβCD) were prepared and characterized by HPLC, XRPD, FTIR, and DSC. PPRs prepared from solid dispersions (SCF gels) and the corresponding physical mixtures (PM gels) were analyzed regarding rheology, morphology, in vitro drug diffusion, and ex vivo drug skin permeation. The application of scCO2 led to the loss of the crystalline lattice of CAR while preserving its chemical identity. On the contrary, αCD crystals were still present in the SCF solid dispersions. SCF gels were more uniform than their corresponding PM, and the supercritical treatment resulted in changes in the rheological behavior, reducing the viscosity. CAR in vitro diffusion was significantly higher (p < 0.05) for the αCD-based SCF gel than its corresponding PM gel. Drug skin permeation showed a significant increase in drug flux from CD-based SCF gels (containing αCD or HPβCD) compared to corresponding PM gels. Additionally, the pretreatment of the skin with αCD exhibited increased CAR permeation, suggesting an interaction between αCD and the skin membrane. Results evidenced that SCF processing decisively modified the properties of the supramolecular gels, particularly those prepared with αCD
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Oleogels for the ocular delivery of epalrestat: formulation, in vitro, in ovo, ex vivo and in vivo evaluation

  • Kattar, Axel
  • Vivero López, María
  • Concheiro Nine, Ángel Joaquín
  • Mudakavi, Rajeed
  • Chauhan, Anuj
  • Álvarez Lorenzo, Carmen
The ocular administration of lipophilic and labile drugs such as epalrestat, an aldose reductase inhibitor with potential for diabetic retinopathy treatment, demands the development of topical delivery systems capable of providing sufficient ocular bioavailability. The aim of this work was to develop non-aqueous oleogels based on soybean oil and gelators from natural and sustainable sources (ethyl cellulose, beeswax and cocoa butter) and to assess their reproducibility, safety and efficiency in epalrestat release and permeation both ex vivo and in vivo. Binary combinations of gelators at 10% w/w resulted in solid oleogels (oleorods), while single gelator oleogels at 5% w/w remained liquid at room temperature, with most of the oleogels displaying shear thinning behavior. The oleorods released up to 4 µg epalrestat per mg of oleorod in a sustained or burst pattern depending on the gelator (approx. 10% dose in 24 h). The HET-CAM assay indicated that oleogel formulations did not induce ocular irritation and were safe for topical ocular administration. Corneal and scleral ex vivo assays evidenced the permeation of epalrestat from the oleorods up to 4 and 2.5 µg/cm2 after six hours, respectively. Finally, the capacity of the developed oleogels to sustain release and provide significant amounts of epalrestat to the ocular tissues was demonstrated in vivo against aqueous-based niosomes and micelles formulations loaded with the same drug concentration. Overall, the gathered information provides valuable insights into the development of oleogels for ocular drug delivery, emphasizing their safety and controlled release capabilities, which have implications for the treatment of diabetic neuropathy and other ocular conditions.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Disulfiram-loaded electrospun fibers with antimicrobial and antitumoral properties for glioblastoma treatment

  • González Prada, Iago
  • Barcelos Ribeiro, Arthur
  • Dion, Marine
  • Magariños Ferro, Beatriz
  • Lapoujade, Clémentine
  • Rousseau, Audrey
  • Concheiro Nine, Ángel Joaquín
  • Garcion, Emmanuel
  • Álvarez Lorenzo, Carmen
Glioblastoma (GB) is a malignant brain tumor with low survival rates and a high recurrence ratio due to limited therapeutic arsenal. The repurposed drug disulfiram (DSF), approved for alcoholism treatment, shows promising anticancer and antimicrobial activity, but its poor biopharmaceutical profile hinders its clinical use. This work aimed to develop DSF-loaded silk fibroin (SF) electrospun fibers for controlled release in the postsurgical resection cavity. Incorporating hydroxypropyl-β-cyclodextrin (HPβCD), which formed inclusion complexes with DSF, enhanced drug release rate and antimicrobial activity (>3 logCFUs reduction) against Staphylococcus aureus and Pseudomonas aeruginosa. Addition of CuCl2 enabled in situ formation of Cu(DDC)2 complexes, further boosting antimicrobial and in vitro antitumoral effects of the nanofibers (≤ 500 nm) while maintaining adequate mechanical properties. Selective toxicity of DSF and DSF-loaded fibers against glioblastoma cells, while sparing against astrocytes, highlights the potential of the nanofibers for targeted brain cancer therapy. Increased potency of DSF at low concentrations when combined with SF fibers, HPβCD and copper was remarkable. Thus, DSF delivery and bioavailability can be significantly optimized through electrospun nanofibers, which may also allow for more precise dosing. Combination with radiotherapy was also explored to assess the translational potential of DSF as part of a combination therapy regimen for glioblastoma. In vivo studies in a rat model simulating GB surgery confirmed the safety of selected formulations in healthy brain tissue. However, findings suggest that DSF-loaded fibers alone may be insufficient for complete tumor eradication, indicating the need for combination with existing therapies to target residual tumor cells effectively.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

In vitro–in vivo correlation of drug release profiles from medicated contact lenses using an in vitro eye blink model

  • Mota, Ana F. Pereira da
  • Vivero López, María
  • Garg, Piyush
  • Phan, Chau-Minh
  • Concheiro Nine, Ángel Joaquín
  • Jones, Lyndon
  • Álvarez Lorenzo, Carmen
There is still a paucity of information on how in vitro release profiles from drug-loaded contact lenses (CLs) recorded in 3D printed eye models correlate with in vivo profiles. This work aims to evaluate the release profiles of two drug-loaded CLs in a 3D in vitro eye blink model and compare the obtained results with the release in a vial and the drug levels in tear fluid previously obtained from an animal in vivo study. In vitro release in the eye model was tested at two different flow rates (5 and 10 µL/min) and a blink speed of 1 blink/10 s. Model CLs were loaded with two different drugs, hydrophilic pravastatin and hydrophobic resveratrol. The release of both drugs was more sustained and lower in the 3D eye model compared to the in vitro release in vials. Interestingly, both drugs presented similar release patterns in the eye model and in vivo, although the total amount of drugs released in the eye model was significantly lower, especially for resveratrol. Strong correlations between percentages of pravastatin released in the eye model and in vivo were found. These findings suggest that the current 3D printed eye blink model could be a useful tool to measure the release of ophthalmic drugs from medicated CLs. Nevertheless, physiological parameters such as the composition of the tear fluid and eyeball surface, tear flow rates, and temperature should be optimized in further studies
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Perimeter and carvacrol-loading regulate angiogenesis and biofilm growth in 3D printed PLA scaffolds

  • Farto Vaamonde, Xián
  • Díaz Gómez, Luis
  • Parga Martínez, Ana
  • Casal Otero, Ana María
  • Concheiro Nine, Ángel Joaquín
  • Álvarez Lorenzo, Carmen
rvacrol is a natural low-cost compound derived from oregano which presents anti-bacterial properties against both Gram-positive and Gram-negative bacteria. In this work, carvacrol-loaded PLA scaffolds were fabricated by 3D printing as platforms to support bone tissue regeneration while preventing biofilm development. Scaffolds were printed with or without a perimeter (lateral wall) mimicking the cortical structure of bone tissue to further evaluate if the lateral interconnectivity could affect the biological or antimicrobial properties of the scaffolds. Carvacrol incorporation was performed by loading either the PLA filament prior to 3D printing or the already printed PLA scaffold. The loading method determined carvacrol localization in the scaffolds and its release profile. Biphasic profiles were recorded in all cases, but scaffolds loaded post-printed released carvacrol much faster, with 50–80% released in the first day, compared to those containing carvacrol in PLA filament before printing which sustained the release for several weeks. The presence or absence of the perimeter did not affect the release rate, but total amount released. Tissue integration and vascularization of carvacrol-loaded scaffolds were evaluated in a chorioallantoic membrane model (CAM) using a novel quantitative micro-computed tomography (micro-CT) analysis approach. The obtained results confirmed the CAM tissue ingrowth and new vessel formation within the porous structure of the scaffolds after 7 days of incubation, without leading to hemorrhagic or cytotoxic effects. The absence of lateral wall facilitated lateral integration of the scaffolds in the host tissue, although increased the anisotropy of the mechanical properties. Scaffolds loaded with carvacrol post-printing showed antibiofilm activity against Staphylococcus aureus and Pseudomonas aeruginosa as observed in a decrease in CFU counting after biofilm detachment, changes in metabolic heat measured by calorimetry, and increased contact killing efficiency. In summary, this work demonstrated the feasibility of tuning carvacrol release rate and the amount released from PLA scaffolds to achieve antibiofilm protection without altering angiogenesis, which was mostly dependent on the perimeter density of the scaffolds
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Recent advances in 3D printed cellulose-based wound dressings: A review on in vitro and in vivo achievements

  • Pita Vilar, María
  • Concheiro Nine, Ángel Joaquín
  • Díaz Gómez, Luis
  • Álvarez Lorenzo, Carmen
Chronic wounds, especially diabetic ulcers, pose a significant challenge in regenerative medicine. Cellulose derivatives offer remarkable wound management properties, such as effective absorption and retention of wound exudates, maintaining an optimal moisture environment crucial for successful chronic wound regeneration. However, conventional dressings have limited efficacy in managing and healing these types of skin lesions, driving scientists to explore innovative approaches. The emergence of 3D printing has enabled personalized dressings that meet individual patient needs, improving the healing process and patient comfort. Cellulose derivatives meet the demanding requirements for biocompatibility, printability, and biofabrication necessary for 3D printing of biologically active scaffolds. However, the potential applications of nanocellulose and cellulose derivative-based inks for wound regeneration remain largely unexplored. Thus, this review provides a comprehensive overview of recent advancements in cellulose-based inks for 3D printing of personalized wound dressings. The composition and biofabrication approaches of cellulose-based wound dressings are thoroughly discussed, including the functionalization with bioactive molecules and antibiotics for improved wound regeneration. Similarly, the in vitro and in vivo performance of these dressings is extensively examined. In summary, this review aims to highlight the exceptional advantages and diverse applications of 3D printed cellulose-based dressings in personalized wound care
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

pH-responsive scaffolds for tissue regeneration: In vivo performance

  • Zarur, Mariana
  • Seijo Rabina, Alejandro
  • Goyanes Goyanes, Álvaro
  • Concheiro Nine, Ángel Joaquín
  • Álvarez Lorenzo, Carmen
A myriad of pH-sensitive scaffolds has been reported in recent decades. Information on their behaviour in vitro under conditions that mimic the pH changes that occur during tissue regeneration is abundant. Differently, the in vivo demonstration of the advantages of pH-responsive systems in comparison with non-responders is more limited. The in vivo scenario is very complex and the intricate relationship between the host response, the overall pathological conditions of the patient, and the risk of colonization by microorganisms is very difficult to imitate in in vitro tests. This review aims to shed light on how the changes in pH between healthy and damaged states and also during the healing process have been exploited so far to develop polymer-based scaffolds that actively contribute in vivo to the healing process avoiding chronification. The main strategies so far tested to prepare pH-responsive scaffolds rely on (i) changes in ionization of natural polymers, ionizable monomers and clays, (ii) reversible cross-linkers, (iii) coatings, and (iv) production of CO2 gas. These strategies are analysed in detail in this review with the description of relevant examples of their performance on specific animal models. The versatility of the techniques used to prepare biocompatible and environment-friendly pH-responsive scaffolds that have been implemented in the last decade may pave the way for a successful translation to the clinic. Statement of significance We report here on the most recent advances in pH-responsive polymer-based scaffolds that have been demonstrated in vivo to be suitable for wound and bone healing. pH is a critical variable in the tissue regeneration process, and small changes can speed up or completely stop the process. Although there is still a paucity of information on the performance in the complex in vivo environment, recently reported achievements using scaffolds endowed with pH-responsiveness through ionic natural polymers, ionizable monomers and clays, reversible cross-linkers, coatings, or formation of CO2 ensure a promising future towards clinical translation
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Physical stimuli-emitting scaffolds: The role of piezoelectricity in tissue regeneration

  • Álvarez Lorenzo, Carmen
  • Zarur, Mariana
  • Seijo Rabina, Alejandro
  • Blanco Fernández, Bárbara
  • Rodríguez-Moldes Rey, María Isabel
  • Concheiro Nine, Ángel Joaquín
The imbalance between life expectancy and quality of life is increasing due to the raising prevalence of chronic diseases. Musculoskeletal disorders and chronic wounds affect a growing percentage of people and demand more efficient tools for regenerative medicine. Scaffolds that can better mimic the natural physical stimuli that tissues receive under healthy conditions and during healing may significantly aid the regeneration process. Shape, mechanical properties, pore size and interconnectivity have already been demonstrated to be relevant scaffold features that can determine cell adhesion and differentiation. Much less attention has been paid to scaffolds that can deliver more dynamic physical stimuli, such as electrical signals. Recent developments in the precise measurement of electrical fields in vivo have revealed their key role in cell movement (galvanotaxis), growth, activation of secondary cascades, and differentiation to different lineages in a variety of tissues, not just neural. Piezoelectric scaffolds can mimic the natural bioelectric potentials and gradients in an autonomous way by generating the electric stimuli themselves when subjected to mechanical loads or, if the patient or the tissue lacks mobility, ultrasound irradiation. This review provides an analysis on endogenous bioelectrical signals, recent developments on piezoelectric scaffolds for bone, cartilage, tendon and nerve regeneration, and their main outcomes in vivo. Wound healing with piezoelectric dressings is addressed in the last section with relevant examples of performance in animal models. Results evidence that a fine adjustment of material composition and processing (electrospinning, corona poling, 3D printing, annealing) provides scaffolds that act as true emitters of electrical stimuli that activate endogenous signaling pathways for more efficient and long-term tissue repair
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Isothermal calorimetry reveals that successful regeneration after a spinal cord injury in larval zebrafish is associated with an increase in energy expenditure

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Contact lenses for pravastatin delivery to eye segments: design and in vitro-in vivo correlations

  • Mota, Ana F. Pereira da
  • Vivero López, María
  • Serramito Blanco, María
  • Díaz Gómez, Luis
  • Serro, Ana Paula
  • Carracedo, Gonzalo
  • Huete Toral, Fernando
  • Concheiro Nine, Ángel Joaquín
  • Álvarez Lorenzo, Carmen
Oral administration of cholesterol-lowering statins, HMG-CoA reductase inhibitors, is associated with beneficial effects on eye conditions. This work aims to design contact lenses (CLs) that can sustainedly deliver pravastatin and thus improve the ocular efficacy while avoiding systemic side effects of statins. Bioinspired hydrogels were prepared with monomers that resemble hydrophobic (ethylene glycol phenyl ether methacrylate) and amino (2-aminoethyl methacrylamide hydrochloride) functionalities of the active site of HMG-CoA. Best performing CLs loaded >6 mg/g, in vitro fulfilled the release demands for daily wearing, and showed anti-inflammatory activity (lowering TNF-α). High hydrostatic pressure sterilization preserved the stability of both the drug and the hydrogel network. Ex vivo tests revealed the ability of pravastatin to accumulate in cornea and sclera and to penetrate through transscleral route. In vivo tests (rabbits) confirmed that, compared to eye drops and for the same dose, CLs provided significantly higher pravastatin levels in tear fluid within 1 to 7 h of wearing. Moreover, after 8 h wearing pravastatin was present in cornea, sclera, aqueous humour and vitreous humour. Strong correlations between percentages of drug released in vitro and in vivo were found. Effects of volume and proteins on release rate and Levy plots were identified
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Customizable orodispersible films: Inkjet printing and data matrix encoding for personalized hydrocortisone dosing

  • Rodríguez Pombo, Lucía
  • Carou Senra, Paola
  • Rodríguez Martínez, Erea
  • Rial, Carlos
  • Félix Lamas, Paulo
  • Álvarez Lorenzo, Carmen
  • Januskaite, Patricija
  • Basit, Abdul W.
  • Goyanes Goyanes, Álvaro
The aim of this study was to exploit the versatility of inkjet printing to develop flexible doses of drug-loaded orodispersible films that encoded information in a data matrix pattern, and to introduce a specialised data matrix-generator software specifically focused on the healthcare sector. Pharma-inks (drug-loaded inks) containing hydrocortisone (HC) were developed and characterised based on their rheological properties and drug content. Different strategies were investigated to improve HC solubility: formation of β-cyclodextrin complexes, Soluplus® based micelles, and the use of co-solvent systems. The software automatically adapted the data matrix size and identified the number of layers for printing. HC content deposited in each film layer was measured, and it was found that the proportion of co-solvent used directly affected the drug solubility and simultaneously played a role in the modification of the viscosity and surface tension of the inks. The formation of β-cyclodextrin complexes improved the drug quantity deposited in each layer. On the contrary, micelle-based inks were not suitable for printing. Orodispersible films containing flexible and low doses of personalised HC were successfully prepared, and the development of a code generator software oriented to medical use provided an additional, innovative, and revolutionary advantage to personalised medicine safety and accessibility.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Xanthan gum/Guar gum-based 3D-printed scaffolds for wound healing: production, characterization, and biocompatibility screening

  • Virzi, Nicola Filippo
  • Pittalà, Valeria
  • Díaz Rodríguez, Patricia
  • Concheiro Nine, Ángel Joaquín
  • Álvarez Lorenzo, Carmen
Biodegradable and eco-sustainable medical devices represent an urgent need to face up to the increasing pollution associated to plastic device wastes. The present study aimed to develop semisolid extruded 3D (SSE-3D)-printed medical devices using mixtures of Xanthan gum (XG) and Guar gum (GG) as a green alternative to non-biodegradable synthetic polymers. The final purpose is to prepare biocompatible, biodegradable, and sterilizable implantable scaffolds with pro-regenerative and wound-healing properties. Inks prepared with 12 % w/v XG/GG (50:50) and blended with citric (CA), succinic (SA), or tartaric acid (TA) possessed suitable rheological profiles and allowed the 3D printing of porous scaffolds with high precision and structural control. Steam-heat sterilization triggered the cross-linking through ester bond formation (confirmed by ATR-FTIR and CP/MAS 13C-NMR). The scaffold crosslinked with SA had reproducible porosity (SEM and pycnometer), maintained the initial shape after 7 days swelling in PBS pH 7.4 and subjected to compression cycles (texturometer analysis), showed good cytocompatibility and hemocompatibility, and promoted angiogenesis in ovo in a chorioallantoic membrane model, evidencing tissue integration without toxicity. Furthermore, these scaffolds attenuated collagenase activity by trapping divalent ions (Ca2+ and Zn2+). Hence, by coupling angiogenic and anticollagenase activity, XG/GG scaffolds are promising candidates for wound healing and pro-regenerative applications.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Testing drug release from medicated contact lenses: the missing link to predict in vivo performance

  • Mota, Ana F. Pereira da
  • Phan, Chau-Minh
  • Concheiro Nine, Ángel Joaquín
  • Jones, Lyndon
  • Álvarez Lorenzo, Carmen
Contact lenses (CLs) offer a wide variety of advantages as ocular drug-releasing platforms, but the feasibility of medicated CL development is constrained by numerous scientific, technological, and regulatory challenges. One main difficulty is the setting of release rate specifications for each drug, since at present there are no standardized in vitro release models that can appropriately predict the performance of drug-eluting CLs once placed onto the eye. CL-adapted release tests may provide knowledge on how the drug release pattern should perform in vivo to trigger and maintain the therapeutic effects for both anterior and posterior ocular tissues. Moreover, in vitro release tests are valuable tools for quality assessment during production and to investigate the effect of a change in composition or process variables. This review aims to shed light on biorelevant ways of evaluating in vitro drug release from CLs and the feasibility of establishing in vitro-in vivo correlations (IVIVC) to predict in vivo performance. First, general guidelines and Pharmacopeia release tests for topical ophthalmic formulations as well as in vitro release tests implemented for drug-CLs in the last two decades are analyzed. Then, development of an appropriate method to investigate IVIVC is attempted from the few papers simultaneously reporting in vitro release profiles and either in vivo release or therapeutic response. Finally, key points to be considered for in vitro testing drug release from a medicated CL are suggested to pave the way to the clinical arena
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Simultaneous fabrication of multiple tablets within seconds using tomographic volumetric 3D printing

  • Rodríguez Pombo, Lucía
  • Martínez Castro, Laura
  • Xu, Xiaoyan
  • Ong, Jun Jie
  • Rial, Carlos
  • García, Daniel Nieto
  • González Santos, Alejandro
  • Flores González, Julián Carlos
  • Álvarez Lorenzo, Carmen
  • Basit, Abdul W.
  • Goyanes Goyanes, Álvaro
3D printing is driving a shift in patient care away from a generalised model and towards personalised treatments. To complement fast-paced clinical environments, 3D printing technologies must provide sufficiently high throughputs for them to be feasibly implemented. Volumetric printing is an emerging 3D printing technology that affords such speeds, being capable of producing entire objects within seconds. In this study, for the first time, rotatory volumetric printing was used to simultaneously produce two torus- or cylinder-shaped paracetamol-loaded Printlets (3D printed tablets). Six resin formulations comprising paracetamol as the model drug, poly(ethylene glycol) diacrylate (PEGDA) 575 or 700 as photoreactive monomers, water and PEG 300 as non-reactive diluents, and lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) as the photoinitiator were investigated. Two printlets were successfully printed in 12 to 32 s and exhibited sustained drug release profiles. These results support the use of rotary volumetric printing for efficient and effective manufacturing of various personalised medicines at the same time. With the speed and precision it affords, rotatory volumetric printing has the potential to become one of the most promising alternative manufacturing technologies in the pharmaceutical industry.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Antimicrobial cyclodextrin-assisted electrospun fibers loaded with carvacrol, citronellol and cinnamic acid for wound healing

  • González Prada, Iago
  • Borges, Anabela
  • Santos-Torres, Beatriz
  • Magariños Ferro, Beatriz
  • Simões, Manuel
  • Concheiro Nine, Ángel Joaquín
  • Álvarez Lorenzo, Carmen
This work aimed to explore an alternative to the use of antibiotics for prevention and treatment of wounds infection caused by two common bacterial pathogens Staphylococcus aureus and Pseudomonas aeruginosa. For this purpose, three different essential oil components (EOCs), namely carvacrol, citronellol and cinnamic acid, were loaded into electrospun fibers of poly-ε-caprolactone (PCL) aided by alpha-cyclodextrin (αCD) and hydroxypropyl-β-cyclodextrin (HPβCD). Electrospun-fibers prepared with each EOC and their mixtures were screened for antimicrobial capability and characterized regarding morphological, mechanical, thermal, surface polarity, antibiofilm and antioxidant properties. αCD formed poly(pseudo)rotaxanes with PCL and weakly interacted with EOCs, while HPβCD facilitated EOC encapsulation and formation of homogeneous fibers (500–1000 nm diameter) without beads. PCL/HPβCD fibers with high concentration of EOCs (mainly carvacrol and cinnamic acid) showed strong antibiofilm (>3 log CFU reduction) and antioxidant activity (10–50% DPPH scavenging effects). Different performances were recorded for the EOCs and their mixtures; cinnamic acid migrated to fiber surface and was released faster. Fibers biocompatibility was verified using hemolysis tests and in ovo tissue integration and angiogenesis assays. Overall, HPβCD facilitates complete release of EOCs from the fibers to the aqueous medium, being an environment-friendly and cost-effective strategy for the treatment of infected wounds.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Niosomes-Based Gene Delivery Systems for Effective Transfection of Human Mesenchymal Stem Cells

  • Carballo-Pedrares, Natalia
  • Kattar, Axel
  • Concheiro, Ángel
  • Álvarez-Lorenzo, Carmen
  • Rey-Rico, Ana
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] Gene transfer to mesenchymal stem cells (MSCs) has arisen as a powerful approach to increase the therapeutic potential of this effective cell population. Over recent years, niosomes have emerged as self-assembled carriers with promising performance for gene delivery. The aim of our work was to develop effective niosomes-based DNA delivery platforms for targeting MSCs. Niosomes based on 1,2-di-O-octadecenyl-3-trimethylammonium propane (DOTMA; 0, 7 or 15%) as cationic lipid, cholesterol as helper lipid, and polysorbate 60 as non-ionic surfactant, were prepared using a reverse phase evaporation technique. Niosomes dispersions (filtered or not) and their corresponding nioplexes with a lacZ plasmid were characterized in terms of size, charge, protection, and complexation abilities. DOTMA concentration had a large influence on the physicochemical properties of resulting nioplexes. Transfection efficiency and cytotoxic profiles were assessed in two immortalized cell lines of MSCs. Niosomes formulated with 15% DOTMA provided the highest values of β-galactosidase activity, being similar to those achieved with Lipofectamine®, but showed less cytotoxicity. Filtration of niosomes dispersions before adding to the cells resulted in a loss of their biological activities. Storage of niosomes formulations (for 30 days at room temperature) caused minor modification of their physicochemical properties but also attenuated the transfection capability of the nioplexes. Differently, addition of the lysosomotropic agent sucrose into the culture medium during transfection or to the formulation itself improved the transfection performance of non-filtered niosomes. Indeed, steam heat-sterilized niosomes prepared in sucrose medium demonstrated transfection capability., The work was supported by MICINN [RTI2018-099389-A-100; PID2020-113881RB-I00], Agencia Estatal de Investigación (AEI) Spain, Xunta de Galicia [ED431C 2020/17], and FEDER. A. Rey-Rico acknowledges MICINN for the Ramón y Cajal Fellowship [RYC2018-025617-I] and Universidade da Coruña/CISUG for the funding for open access charge. This project was also funded by the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Actions grant agreement N° 813440 (ORBITAL–Ocular Research by Integrated Training And Learning), Xunta de Galicia; ED431C 2020/17
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Predicting pharmaceutical inkjet printing outcomes using machine learning

  • Carou-Senra, Paola
  • Ong, Jun Jie
  • Muñiz, Brais
  • Seoane-Viaño, Iria
  • Rodríguez-Pombo, Lucía
  • Cabalar, Pedro
  • Álvarez-Lorenzo, Carmen
  • Basit, Abdul W
  • Pérez, Gilberto
  • Goyanes, Álvaro
[Abstract]: Inkjet printing has been extensively explored in recent years to produce personalised medicines due to its low cost and versatility. Pharmaceutical applications have ranged from orodispersible films to complex polydrug implants. However, the multi-factorial nature of the inkjet printing process makes formulation (e.g., composition, surface tension, and viscosity) and printing parameter optimization (e.g., nozzle diameter, peak voltage, and drop spacing) an empirical and time-consuming endeavour. Instead, given the wealth of publicly available data on pharmaceutical inkjet printing, there is potential for a predictive model for inkjet printing outcomes to be developed. In this study, machine learning (ML) models (random forest, multilayer perceptron, and support vector machine) to predict printability and drug dose were developed using a dataset of 687 formulations, consolidated from in-house and literature-mined data on inkjet-printed formulations. The optimized ML models predicted the printability of formulations with an accuracy of 97.22%, and predicted the quality of the prints with an accuracy of 97.14%. This study demonstrates that ML models can feasibly provide predictive insights to inkjet printing outcomes prior to formulation preparation, affording resource- and time-savings., The research was partially supported by MCIN (PID 2020-113881RB-I00/AEI/10.13039/501100011033), Spain, Xunta de Galicia (ED431C 2020/17), and FEDER.L.R.P. acknowledges the predoctoral fellowship provided by the Ministerio de Universidades (Formación de Profesorado Universitario (FPU 2020). I.S.V. acknowledges Consellería de Cultura, Educación e Universidade for her Postdoctoral Fellowship (Xunta de Galicia, Spain; ED481B-2021-019). L.R.P. acknowledges the predoctoral fellowship provided by the Ministerio de Universidades (Formación de Profesorado Universitario (FPU 2020) ., Xunta de Galicia; ED431C 2020/17, Xunta de Galicia; ED481B-2021-019