Pasar al contenido principal

COORDINACION SEGURA DE VEHICULOS AUTONOMOS

PID2020-114244RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 88
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Autonomous Vehicle State Estimation and Mapping Using Takagi–Sugeno Modeling Approach

  • Chaubey, Shivam
  • Puig, Vicenç
This paper proposes an optimal approach for state estimation based on the Takagi–Sugeno (TS) Kalman filter using measurement sensors and rough pose obtained from LIDAR scan end-points matching. To obtain stable and optimal TS Kalman gain for estimator design, a linear matrix inequality (LMI) is optimized which is constructed from Lyapunov stability criteria and dual linear quadratic regulator (LQR). The technique utilizes a Takagi–Sugeno (TS) representation of the system, which allows modeling the complex nonlinear dynamics in such a way that linearization is not required for the estimator or controller design. In addition, the TS fuzzy representation is exploited to obtain a real-time Kalman gain, avoiding the expensive optimization of LMIs at every step. The estimation schema is integrated with a nonlinear model-predictive control (NMPC) that is in charge of controlling the vehicle. For the demonstration, the approach is tested in the simulation, and for practical validity, a small-scale autonomous car is used., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00 ), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014-2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482). The author is also supported by a Industrial PhD AGAUR grant (Ref. 2019 DI 040).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Economic Linear Parameter Varying Model Predictive Control of the Aeration System of a Wastewater Treatment Plant †

  • Nejjari, Fatiha
  • Khoury, Boutrous
  • Puig, Vicenç
  • Quevedo, Joseba
  • Pascual, Josep
  • Campos, Sergi de
This work proposes an economic model predictive control (EMPC) strategy in the linear parameter varying (LPV) framework for the control of dissolved oxygen concentrations in the aerated reactors of a wastewater treatment plant (WWTP). A reduced model of the complex nonlinear plant is represented in a quasi-linear parameter varying (qLPV) form to reduce computational burden, enabling the real-time operation. To facilitate the formulation of the time-varying parameters which are functions of system states, as well as for feedback control purposes, a moving horizon estimator (MHE) that uses the qLPV WWTP model is proposed. The control strategy is investigated and evaluated based on the ASM1 simulation benchmark for performance assessment. The obtained results applying the EMPC strategy for the control of the aeration system in the WWTP of Girona (Spain) show its effectiveness., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014–2020 (ref. 001-P-001643 Looming Factory), and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Health-Aware Economic MPC for Operational Management of Flow-Based Networks Using Bayesian Networks

  • Pedrosa, Javier
  • Puig, Vicenç
  • Nejjari, Fatiha
This paper presents a health-aware economic Model Predictive Control (EMPC) approach for the Prognostics and Health Management (PHM) of generalized flow-based networks. The proposed approach consists of the integration of the network reliability model obtained from a Bayesian network in the control model. The controller is then able to optimally manage the supply taking into consideration the distribution of the control effort, to extend the life of the actuators by delaying the network reliability decay as much as possible. It also considers an optimal inventory replenishment policy based on a desired risk acceptability level, leading to the availability of safety stocks for unexpected excess demand in networks. The proposed implementation is illustrated with a real case study corresponding to an aggregate model of the Drinking Water transport Network (DWN) of Barcelona., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014–2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinematic/Dynamic SLAM for Autonomous Vehicles Using the Linear Parameter Varying Approach

  • Vial, Pau
  • Puig, Vicenç
Most existing algorithms in mobile robotics consider a kinematic robot model for the the Simultaneous Localization and Mapping (SLAM) problem. However, in the case of autonomous vehicles, because of the increase in the mass and velocities, a kinematic model is not enough to characterize some physical effects as, e.g., the slip angle. For this reason, when applying SLAM to autonomous vehicles, the model used should be augmented considering both kinematic and dynamic behaviours. The inclusion of dynamic behaviour implies that nonlinearities of the vehicle model are most important. For this reason, classical observation techniques based on the the linearization of the system model around the operation point, such as the well known Extended Kalman Filter (EKF), should be improved. Consequently, new techniques of advanced control must be introduced to more efficiently treat the nonlinearities of the involved models. The Linear Parameter Varying (LPV) technique allows working with nonlinear models, making a pseudolinear representation, and establishing systematic methodologies to design state estimation schemes applying several specifications. In recent years, it has been proved in many applications that this advanced technique is very useful in real applications, and it has been already implemented in a wide variety of application fields. In this article, we present a SLAM-based localization system for an autonomous vehicle considering the dynamic behaviour using LPV techniques. Comparison results are provided to show how our proposal outperforms classical observation techniques based on model linearization., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014–2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482). Authors are also supported by an Industrial PhD AGAUR grant (Ref. 2019 DI 040).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

LPV Control and Virtual-Sensor-Based Fault Tolerant Strategies for a Three-Axis Gimbal System

  • Medero Borrell, Ariel
  • Puig, Vicenç
This paper deals with the LPV control of a three-axis gimbal including fault-tolerant capabilities. First, the derivation of an analytical model for the considered system based on the robotics Serial-Link (SL) theory is derived. Then, a series of simplifications that allow obtaining a quasi-LPV model for the considered gimbal is proposed. Gain scheduling LPV controllers with PID structure are designed using pole placement by means of linear matrix inequalities (LMIs). Moreover, exploiting the sensor redundancy available in the gimbal, a virtual-sensor-based fault tolerant control (FTC) strategy is proposed. This virtual sensor uses a Recursive Least Square (RLS) estimation algorithm and an LPV observer for fault detection and estimation. Finally, the proposed LPV control scheme including the virtual sensor strategy is tested in simulation in several scenarios., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014-2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482). The author is also supported by a Industrial PhD AGAUR grant (Ref. 2019 DI 040).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zonotopic Linear Parameter Varying SLAM Applied to Autonomous Vehicles

  • Facerias, Marc
  • Puig, Vicenç
  • Alcalá Baselga, Eugenio
This article presents an approach to address the problem of localisation within the autonomous driving framework. In particular, this work takes advantage of the properties of polytopic Linear Parameter Varying (LPV) systems and set-based methodologies applied to Kalman filters to precisely locate both a set of landmarks and the vehicle itself. Using these techniques, we present an alternative approach to localisation algorithms that relies on the use of zonotopes to provide a guaranteed estimation of the states of the vehicle and its surroundings, which does not depend on any assumption of the noise nature other than its limits. LPV theory is used to model the dynamics of the vehicle and implement both an LPV-model predictive controller and a Zonotopic Kalman filter that allow localisation and navigation of the robot. The control and estimation scheme is validated in simulation using the Robotic Operating System (ROS) framework, where its effectiveness is demonstrated., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020- 114244RB-I00), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014–2020 (ref. 001-P-001643 Looming Factory), and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482). The author is also supported by an Industrial PhD AGAUR grant (Ref. 2019 DI 040).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Passivation-based control reconfiguration with virtual actuators

  • Bessa, Iury
  • Puig, Vicenç
  • Martínez Palhares, Reinaldo
This paper presents a novel approach for designing reconfiguration blocks for fault hiding of linear systems subject to actuator faults based on the passivity/dissipativity theory. For this purpose, the concept of passivation block is used to design virtual actuators (VAs) which guarantee that the faulty plant achieves the desired passivity indices and consequently the stability. Linear matrix inequalities (LMI)-based conditions are provided for designing the proposed VAs for ensuring the stability recovery for linear systems. Finally, a numerical example is used for assessing the proposed approach., This work was supported by the Brazilian agencies CNPq, FAPEMIG, FAPEAM, and the PROPG-CAPES/FAPEAM Scholarship Program. This work has also been partially co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00) and the ERDF Operational Program of Catalonia 2014-2020 (ref. 001-P-001643 Looming Factory).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust fault detection using set-based approaches for LPV systems: Application to autonomous vehicles

  • Zhang, Shuang
  • Puig, Vicenç
  • Ifqir, Sara
This paper addresses the problem of robust fault detection for Linear Parameter Varying (LPV) systems using set-based approaches. Two approaches are proposed, based respectively on set-based state and parameter estimation methods, for implementing direct and inverse test for robust fault detection (FD). The uncertainties are assumed to be unknown but bounded and their effect is propagated using zonotopic sets. These robust FD test methods aim at checking the consistency between the measured and estimated behaviour obtained from estimator in the parameter or output space considering the effect of the uncertainty. When an inconsistency is detected, a fault can be indicated. A case study based on an autonomous vehicle is employed to compare the performance of proposed FD tests., This work has been co-financed by the Spanish State ResearchAgency (AEI) and the European Regional De-velopment Fund (ERFD) through the project SaCoAV (ref.MINECOPID2020-114244RB-I00),the European Regional DevelopmentFundofthe European Union in the frameworkofthe ERDF Operational Programof Catalonia 2014-2020 (ref.001-P-001643LoomingFac-tory),and Chinese Scholarship Council (CSC) under grant (202006120006).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A supervisory control scheme for uncertain constrained time-delay discrete-time linear systems

  • Ahmadzadeh, Hamid Reza
  • Aghaei, Shahram
  • Puig, Vicenç
In this paper, a two-layer supervisory control scheme is proposed for discrete-time linear systems with state/input constraints, including multiple state time-delays, parametric uncertainties, and exogenous disturbance. The inner control layer is designed to achieve robust H tracking performance considering the delays as extra states but neglecting the input/state constraints. On the other hand, in the outer control layer, a command governor (CG) is designed to robustly guarantee the satisfaction of state and input constraints by computing a minimal Robust Positively Invariant (mRPI). To this end, the CG manipulates reference inputs by generating the nearest admissible value to be applied to the closed-loop system in both transient and steady-state response through the computation of the Maximal Output Admissible Set (MOAS). Finally, the validity of the proposed scheme is assessed in simulation using a numerical example and a continuous stirred tank reactor (CSTR) system., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Two-Level Economic Health-Aware LPV MPC of a Wind Turbine

  • Boutrous, Khoury
  • Puig, Vicenç
  • Nejjari, Fatiha
Trabajo presentado en la European Control Conference (ECC), celebrada en Bucarest (Rumanía), del 13 al 16 de junio de 2023, This paper considers the possibility of a direct incorporation of wind turbine prognostic information in the framework of model predictive control culminating in a Health Aware MPC design. The wind turbine blades, the chosen component of the study, are subjected to flapwise edge root moment, as a stress component, to acquire important prognostic information of degradation via the well-established stiffness degradation methodology. An optimization problem is solved by considering segmented degradation functions based on accumulated stress values on the blades. A two-level Linear Parameter Varying control scheme is proposed to allow for wind turbine control at different operating regions of wind and also to circumvent non-linearities in the MPC setup. The controller establishes a trade-off between standard wind turbine control objectives and the mitigation of component degradation concerning wind turbine blades. A 5 MW benchmark wind turbine is used as a case study for illustrative purposes., This work has been co-financed by the Spanish Research Agency (AEI) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal Control of Hybrid Photovoltaic/Thermal Water System in Solar Panels Using the Linear Parameter Varying Approach

  • Jamaaoui, Faycel
  • Puig, Vicenç
  • Ayadi, Mounir
During photovoltaic (PV) conversion in solar panels, a part of the solar radiation is not converted to electricity by the cells, producing heat that could increase their temperature. This increase in temperature deteriorates the performance of the PV panel. In this paper, a hybrid PV/thermal (PV/T) water system is proposed to mitigate this problem. This system combines a PV panel and a thermal collector. In this paper, we focused on the modeling and control of this hybrid system in the linear parameter varying (LPV) framework. An optimal linear quadratic regulator (LQR) is proposed to control the PV cell temperature around an optimal value that maximises electricity generation. Since the system model is nonlinear, an optimal LQR gain-scheduling state-feedback control approach based on an LPV representation of the nonlinear model is designed using the Linear Matrix Inequality (LMI) method. The goal is to obtain the maximum electrical power for each solar panel. Since a reduced number of sensors is available, an LPV Kalman filter is also proposed to estimate the system states required by the state-feedback controller. The obtained results in a laboratory setup in simulation are used to assess the proposed approach, showing promise in terms of control performance of the PV/T system., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014–2020 (ref. 001-P-001643 Looming Factory), and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482). The author is also supported by an Industrial PhD AGAUR grant (Ref. 2019 DI 040)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zonotopic Set-Membership State Estimation for Switched LPV Systems

  • Zhang, Shuang
  • Puig, Vicenç
  • Ifqir, Sara
This paper addresses the state estimation problem for switched discrete-time Linear Parameter Varying (LPV) systems with mensurable and unmeasurable scheduling parameters. A zonotopic switched polytopic state estimator, considering parameter uncertainty, is proposed based on a Set-Membership Approach (SMA). Taking Average Dwell Time (ADT) into account, a new criterion is proposed to guarantee the convergence of the estimation. An application to vehicle lateral dynamics state estimation is used as case study. Simulation results reveal the effectiveness of the proposed algorithm and demonstrate advantages over the existing methods., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020- 114244RB-I00, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A model predictive scheduling strategy for coordinated inland vessel navigation and bridge operation

  • Segovia Castillo, Pablo
  • Puig, Vicenç
  • Reppa, Vasso
Trabajo presentado en la IEEE Conference on Control Technology and Applications (CCTA), celebrada en Bridgetown (Barbados), del 16 al 18 de agosto de 2023, This paper presents the design of a model predictive scheduling strategy to address the inland waterborne transport (IWT) problem considering bridges that must open to enable vessel passage. The main contribution is the formulation of a control-oriented model of the problem, including propositional logic expressions that characterize system behavior and their conversion into (in)equality constraints. The resulting model is embedded into a predictive scheduling approach to determine bridge opening timetables and vessel passage times in a coordinated manner. The effectiveness of the strategy is demonstrated on a realistic case study based on the Rhine-Alpine corridor., This work was supported in part by the Researchlab Autonomous Shipping (RAS) of Delft University of Technology, in part by the project ”Novel inland waterway transport concepts for moving freight effectively (NOVIMOVE)” (this project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 858508), and in part by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Neuro-fuzzy Takagi Sugeno observer for fault diagnosis in wind turbines

  • Pérez-Pérez, Esvan Jesús
  • Puig, Vicenç
  • López-Estrada, Francisco Ronay
  • Valencia-Palomo, Guillermo
  • Santos-Ruiz, Ildeberto
This work proposes a method for fault diagnosis based on Takagi Sugeno (TS) observers and convex models identified with a multioutput adaptive neuro-fuzzy inference system (MANFIS) derived from structural analysis. A bank of zonotopic TS observers is implemented to detect sensors and actuators faults. Unlike other works that require data from fault scenarios to train the MANFIS neural network, only fault-free data are considered. In addition, uncertainty related to aerodynamic loads and measurement noise is considered for testing the proposed method's robustness. The method performance is evaluated using measurements from a 5 MW wind turbine benchmark., This work has been co-financed by the Spanish State Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and MASHED (TED2021-129927B-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Gaussian Sampling Approach to deal with Imbalanced Telemetry Datasets in Industrial Applications

  • Galve, Sergio
  • Puig, Vicenç
  • Vilajosana, Xavi
Trabajo presentado en el 31st Mediterranean Conference on Control and Automation (MED), celebrado en Limassol (Chipre), del 26 al 29 de junio de 2023, Practical implementation of data analytics in industrial environments has always been a problematic area because of data availability and quality. In this paper, a Gaussian sampling methodology is proposed to address the problem of imbalanced telemetry datasets that is one of the root causes that make modelling less reliable. By generating subsets that achieve homogeneous density distributions this problem is addressed. By comparing the impact of this method with the baseline case of random sampling, this paper aims to address this problem and propose a practical solution. A case study based on an industrial cooling device is used to assess and illustrate the proposed approach., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fault Detection using Data-driven LPV State Estimation based on Structural Analysis and ANFIS

  • Fang, Xin
  • Blesa, Joaquim
  • Puig, Vicenç
Trabajo presentado en la European Control Conference (ECC), celebrada en Bucarest (Rumanía), del 13 al 16 de junio de 2023, This paper presents a data-driven fault detection method combining structural analysis (SA) and machine learning data-driven algorithms. Given a graphic (or textual) system description and the available inputs/outputs measurements, the structure of analytical redundancy relations (ARRs) between some inputs and outputs can be determined with the aid of the SA of the system. Then, using a machine learning data-driven approach applied to historical data, analytical relations between inputs and outputs can be obtained. Thereby, instead of finding ARRs from physical mathematical model, ARRs are obtained combining SA and data-driven approaches. In this paper, the adaptive network fuzzy inference system (ANFIS) data-driven approach is used to implement the diagnosis system. Once the ANFIS model has been identified, it is reformulated in linear parameter varying (LPV) form. Then, a fault detection scheme based on a LPV Kalman filter and pole placement method is developed. A well-known case study based on a four-tanks system is used for illustrative purposes., This work has been co-financed by the Spanish Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and L-BEST (PID2020-115905RB-C2I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust Data-driven TS MPC-based Reference Governor for an Autonomous Racing Vehicle Considering Battery State of Charge

  • Samada, Sergio E.
  • Puig, Vicenç
  • Nejjari, Fatiha
Trabajo presentado en la European Control Conference (ECC), celebrada en Bucarest (Rumanía), del 13 al 16 de junio de 2023, A reference governor approach based on model predictive control (MPC-RG) for an autonomous racing vehicle is developed in this work. This control strategy avoids constraint violations and includes online health management capabilities by solving a multi-objective optimization problem. In this case, a trade-off between the maximization of the state of charge of the battery and the longitudinal velocity, even the minimization of the control actions variation is carried out. In turn, the invariant zonotopic sets analysis ensures the convergence of states to a stable region. On the other hand, the proposed control scheme also combines a robust states feedback linear quadratic regulator (LQR) with a Kalman filter (KF) estimator to compensate for model uncertainty and exogenous disturbances, as well as, to estimate the unmeasured lateral velocity. Moreover, to represent the non-linear behaviour of the vehicle, a data-driven neuro-fuzzy Takagi-Sugeno (TS) model is employed. The developed approach is tested and evaluated in realistic environments by means of a simulated 1/10 Scale RC car., This work has been co-financed by the Spanish Research Agency (AEI) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Multilayer Control Strategy for the Calais Canal

  • Segovia Castillo, Pablo
  • Puig, Vicenç
  • Duviella, Eric
This article presents the design of a control strategy for the Calais canal, a navigation canal located in a lowland area in northern France that is affected by tides. Moreover, the available actuators are discrete-valued and the hierarchy of operational objectives is time-varying. All these circumstances render water level regulation of the Calais canal a challenging problem. In view of this situation, the design of the overall control architecture is divided into a sequence of structured tasks, which are distributed among layers. The upper layer determines the current operating mode based on the analysis of several environmental and operational aspects. Information regarding the current mode is taken into account at the intermediate layer to select the appropriate optimization-based control problem, which is solved using lexicographic minimization. The optimal control setpoints are determined and sent to the lower layer, where scheduling problems are solved to select low-level control actions from a finite set to minimize the mismatch with respect to the optimal setpoints. Different realistic simulation scenarios are tested to demonstrate the effectiveness of the proposed approach., This work was supported in part by the Researchlab Autonomous Shipping (RAS), Delft University of Technology; and in part by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERDF) through the Project Safe Coordination of Autonomous Vehicles (SaCoAV) under Grant MINECO PID2020-114244RB-I00. Recommended by Associate Editor G. Papafotiou, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Learning-Based Control of Autonomous Vehicles Using an Adaptive Neuro-Fuzzy Inference System and the Linear Matrix Inequality Approach

  • Sheikhsamad, Mohammad
  • Puig, Vicenç
This paper proposes a learning-based control approach for autonomous vehicles. An explicit Takagi-Sugeno (TS) controller is learned using input and output data from a preexisting controller, employing the Adaptive Neuro-Fuzzy Inference System (ANFIS) algorithm. At the same time, the vehicle model is identified in the TS model form for closed-loop stability assessment using Lyapunov theory and LMIs. The proposed approach is applied to learn the control law from an MPC controller, thus avoiding the use of online optimization. This reduces the computational burden of the control loop and facilitates real-time implementation. Finally, the proposed approach is assessed through simulation using a small-scale autonomous racing car., This work was partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (Ref. MINECO PID2020-114244RB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Safe motion planner for autonomous driving based on LPV MPC and reachability analysis

  • Carrizosa-Rendón, Álvaro
  • Puig, Vicenç
  • Nejjari, Fatiha
This article presents an innovative optimization-based solution to the collision avoidance challenge for autonomous vehicles. The presented approach consists in an online motion planner designed to define feasible and efficient paths able to deal with dynamic surroundings while implicitly ensure safety in the proposed maneuvers. The fact of considering moving obstacles inside the motion planner increases the complexity of the problem while forces it to be executed more frequently as others. To reduce this computational complexity, the approach presented counts with a two stages translation of the commonly used non-linear optimization-based structure into a QP formulation which can be easily solved. The first stage is based on the use of LPV matrices in the dynamic constraints of the vehicle. The second stage consists in performing a reachability analysis based on set propagation to obtain linear expressions of the permitted inputs and reachable states which guarantee safety conditions., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00) and by the DGR of Generalitat de Catalunya, Spain (SAC group ref. 2017/SGR/482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Linear Quadratic Zonotopic Control of Switched Systems: Application to Autonomous Vehicle Path-Tracking

  • Zhang, Shuang
  • Ifqir, Sara
  • Puig, Vicenç
This letter proposes a zonotopic approach for the state feedback control problem of a class of uncertain switched systems subject to unknown but bounded disturbances and measurement noises. The proposed approach is the zonotopic analogous case of the switched Linear Quadratic Gaussian (LQG) control, in which the feedback loop is closed using the optimal estimates of a Switched Zonotopic Kalman Filter (SZKF) leading to a Switched Linear Quadratic Zonotopic (SLQZ) control scheme. In this context, first, a SZKF with offline filter gains design is proposed so that the unmeasurable system states can be estimated. Then, to tackle the synthesis of the SZKF and the state feedback controller, separation principle is proved so that the computation of the optimal controller and estimator can be done separately by finding the solutions to a finite set of Linear Matrix Inequalities (LMIs). At last, a reference path tracking controller of the vehicle lateral dynamics is designed to demonstrate the validity and performance of the proposed method., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014–2020 (ref. 001-P-001643 Looming Factory), by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482) and by the Chinese Scholarship Council (CSC) under grant (202006120006)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Economic Reliability-Aware MPC for Operational Management of Flow-Based Networks using Bayesian Networks

  • Pedrosa, Javier
  • Puig, Vicenç
  • Nejjari, Fatiha
Trabajo presentado en el 30th Mediterranean Conference on Control and Automation (MED), celebrado en Vouliagmeni (Grecia), del 28 de junio al 1 de julio de 2022, This paper presents an economic reliability-Aware Model Predictive Control (MPC) approach for the Prognostics and Health Management (PHM) of generalized flow-based networks. The main enhancement with respect to some existing approaches relies on the integration of the network reliability model obtained from a Bayesian Network. In this case, the controller is able to optimally manage the supply taking into consideration the distribution of the control effort. The life of the actuators is extended by delaying as much as possible the network reliability decay. The proposed methodology also considers an optimal inventory replenishment policy based on a desired risk acceptability level, leading to the availability of safety stocks for unexpected excess demand in networks. The proposed implementation is illustrated with a real case study corresponding to an aggregate model of the Drinking Water transport Network (DWN) of Barcelona., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00 ), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014-2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing safety in autonomous vehicles using zonotopic LPV-EKF for fault detection and isolation in state estimation

  • Conejo, Carlos
  • Puig, Vicenç
  • Morcego, Bernardo
  • Navas, Francisco
  • Milanés, Vicente
In this paper, a solution is presented to address the sensor fault detection and isolation (FDI) problem in state estimation for autonomous vehicles (AVs). The primary impetus for autonomous driving lies in its potential to ensure vehicle safety, a goal that requires an accurate determination of location, heading, and speed. Although sensors can directly obtain these measurements, they are often affected by noise and disturbances with unknown but bounded (UBB) distributions. To mitigate these effects, state estimation techniques are commonly employed, leveraging sensor fusion. This work aims to design an FDI methodology that continuously evaluates the accuracy of the state estimation algorithm in an AV. In order to achieve this goal, various observation techniques for robust FDI are compared, including a novel approach of EKF formulated within the LPV framework, named LPV-EKF. A zonotopic LPV-EKF observer is implemented to perform FDI on both state estimation inputs and outputs, considering an UBB noise distribution. The proposed methodology for the identification of anomalies is optimised to minimise the detection time in real world scenarios. The experimental results for FDI, collected from an autonomous Renault Zoe (SAE Level 3), are analysed and discussed., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the SaCoAV project (ref. PID2020-114244RB-I00). It is also partially funded by Renault Group through the Industrial Doctorate “Safety of Autonomous Vehicles” (ref. C12507). Renault Group has been actively involved in the article, including the provision of essential tools, such as a simulator and a real-world testing platform., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fault Prognosis Approach Using Data-Driven Structurally Generated Residuals

  • Fang, Xin
  • Blesa, Joaquim
  • Puig, Vicenç
This paper presents a fault prognosis approach using data-driven structurally generated residuals. It assumes that a set of residuals generated using structural analysis (SA) and identified using data-driven approach are available. Residuals are used for fault detection purposes activating fault signals when residual values reach anomalous values. In addition, it is possible to predict future faults by means of the detection of anomalous residual deviations. Once an anomalous change in the residual trend has been detected, it is proceed to estimate when this residual deviation will result in a fault detection and therefore which will be the Remaining Useful Life (RUL) time of the system. For this purpose, the future residual evolution is estimated by means of a regressor function. Nominal and interval parameters of regressor function are estimated with available residual data providing nominal and interval values of the RUL of the system. A brushless direct current (BLDC) motor is used as the application case study to illustrate the performance of proposed approach., This work has been co-financed by the Spanish Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and L-BEST (PID2020- 115905RB-C21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic Coordination of Multiple Movable Bridges and Vessels for Time-Efficient Inland Waterway Navigation

  • Segovia Castillo, Pablo
  • Puig, Vicenç
  • Negenborn, Rudy R.
  • Reppa, Vasso
This paper considers the presence of movable bridges in inland waterway transport, and presents a control framework for the joint dynamic coordination of bridge operations and autonomous vessel navigation to minimize waiting times of vessels at bridges. Simultaneous evolution of bridge occupancy and vessel position is captured by a control-oriented model that incorporates qualitative behavior in the form of propositional logic expressions. A model predictive control (MPC) strategy is designed considering adaptable bridge opening regimes to exploit vessel passage demand, and operational preferences of both vessel skippers and bridge operators are taken into account to reach fair trade-off decisions. A realistic case study pertaining to the Rhine-Alpine corridor is used to demonstrate the effectiveness of the approach. Appropriate key performance indicators (KPIs) are defined and employed for a quantitative comparison with a mixed-integer programming (MIP) strategy with fixed opening regimes. Furthermore, sensitivity to the main MPC parameters is examined by carrying out extensive testing to assess the effect of each design parameter on the solution., This work was supported in part by the Researchlab Autonomous Shipping (RAS) of Delft University of Technology, in part by the project ”Novel inland waterway transport concepts for moving freight effectively (NOVIMOVE)” (which has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 858508), and in part by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00). (Corresponding author: Pablo Segovia.), Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Design of shifting state-feedback controllers for LPV systems subject to time-varying saturations via parameter-dependent Lyapunov functions

  • Ruiz Royo, Adrián|||0000-0002-0387-4235
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
This paper considers the problem of designing a shifting state-feedback controller via quadratic parameter-dependent Lyapunov functions (QPDLFs) for systems subject to symmetric time-varying saturations. By means of the linear parameter varying (LPV) framework and the use of the shifting paradigm and the ellipsoidal invariant theory, it is shown that the solution to this problem can be expressed with linear matrix inequalities (LMIs) which can efficiently be solved via available solvers. Specifically, three hyper-ellipsoidal regions are defined in the state-space domain for ensuring that the control action remains in the linearity region of the actuators where saturation does not occur. Furthermore, the closed-loop convergence speed is regulated online according to the instantaneous saturation limit values through the shifting paradigm concept. The main characteristics of the proposed approach are validated by means of two illustrative examples., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. PID2020-114244RB-I00). This work has also been partially funded by AGAUR of Generalitat de Catalunya, Spain through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the University of Stavanger, Norway through the project IN-12267. A. Ruiz is also supported by the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya, Spain, the European Social Fund (ESF) and AGAUR under a FI SDUR grant (ref. 2020 FI-SDUR 00097)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Safe planning using mixed-integer programming for autonomous vehicles coordination

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Sarrate Estruch, Ramon|||0000-0002-9979-5899
Coordination between intelligent vehicles is essential for the advancement of fully autonomous driving. Ensuring safety is the primary focus of this challenge. This paper proposes a safe model predictive planner (MPP) for vehicle coordination, which is robust against uncertainty and noise. The planner provides a feasible route, taking into account the tube of possible trajectories of neighbouring vehicles. To achieve this objective, a linear parameter-varying (LPV) prediction model of the vehicle is used. For obstacle avoidance and overtaking maneuvers, mixed-integer linear inequalities as constraints in the MPP formulation are added. Regarding uncertainty and noise, both are assumed to be unknown but bounded and zonotopes are used to enclose and propagate them. Similarly, a zonotopic optimal filter compensates for the measurement noises and estimates the lateral velocity not provided by the vehicle’s instrumentation. The proposed coordination approach is evaluated in a simulation environment, specifically in an aggressive regime with maximum velocity, using a 1/10 scale electric car., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (Ref. MINECO PID2020-114244RB-I00) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2017/SGR/482). The work is also supported by the Agency for Management of University and Research Grants (FI AGAUR) (Ref. 2021FI-B1 00097), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

LMI conditions for stability and state-feedback H8 control of discrete-time multimode multidimensional systems

  • Medero Borrell, Ariel|||0000-0002-1316-2506
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Sename, Olivier
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper deals with stability and state feedback control of discrete-time Multi-Mode Multi-Dimensional (M3D) linear systems. The M3D switch dynamics are modeled through a state mapping describing the mode transitions. This M3D model framework then allows to consider polyquadratic Lyapunov functions to obtain Linear Matrix Inequalities conditions for stability proof and for the synthesis of state-feedback controllers under H8 performance. A numerical example illustrates the improvement of the controller synthesis conditions here introduced for discrete-time M3D systems over independent point-wise mode solutions., This work has been supported by the French National Research Agency (CNRS, “Investissements d’Avenir”, ANR-15-IDEX-02). It has also been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00) and by FPI UPC grant 2020FPIUPC-008., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Robust fault detection using zonotopic parameter estimation

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
This paper addresses the system identification problem, as well as its application to robust fault detection, considering parametric uncertainty and using zonotopes. As a result, a Zonotopic Recursive Least Squares (ZRLS) estimator is proposed and compared with the Setmembership (SM) approach when applied to fault detection, taking as a reference the minimum detectable fault generated in the worst-case. To illustrate the effectiveness of the proposed robust parameter estimation and fault detection methodologies, a quadruple tank process is employed., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional De- velopment Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00 ), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalo- nia 2014-2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482). The author is also supported by a FI AGAUR grant (Ref. 2021FI-B1 00097)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A model predictive scheduling strategy for coordinated inland vessel navigation and bridge operation

  • Segovia Castillo, Pablo|||0000-0003-3593-907X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Reppa, Vasso
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents the design of a model predictive scheduling strategy to address the inland waterborne transport (IWT) problem considering bridges that must open to enable vessel passage. The main contribution is the formulation of a control-oriented model of the problem, including propositional logic expressions that characterize system behavior and their conversion into (in)equality constraints. The resulting model is embedded into a predictive scheduling approach to determine bridge opening timetables and vessel passage times in a coordinated manner. The effectiveness of the strategy is demonstrated on a realistic case study based on the Rhine-Alpine corridor., This work was supported in part by the Researchlab Autonomous Shipping (RAS) of Delft University of Technology, in part by the project ”Novel inland waterway transport concepts for moving freight effectively (NOVIMOVE)” (this project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 858508), and in part by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Zonotopic recursive least-squares parameter estimation: Application to fault detection

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
The uncertain parameters estimation problem for linear discrete-time systems modeled in regression form and assuming an unknown but bounded description of the noise, is the main subject of this work. Particularly, zonotopic sets for bounding the parametric uncertainty are considered. Then, a zonotopic recursive least-squares (ZRLS) estimator is proposed and compared with its stochastic counterpart (RLS), as well as with the set-membership (SM) approach. Likewise, the parameter estimation problem is addressed from the Bayesian general framework to define the relationship between stochastic and deterministic approaches. Moreover, both ZRLS and SM applications applied to fault detection are assessed taking as a reference the minimum detectable fault in the worst case. Finally, a well-known quadruple-tank process is used to illustrate the estimation and fault detection results., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014–2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482). The author is also supported by a FI AGAUR grant (ref. 2021FI-B1-00097)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Enhancing safety in autonomous vehicles using zonotopic LPV-EKF for fault detection and isolation in state estimation

  • Conejo Barceló, Carlos|||0009-0007-7233-5650
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
  • Milanés, Vicente
  • Navas, Francisco
In this paper, a solution is presented to address the sensor fault detection and isolation (FDI) problem in state estimation for autonomous vehicles (AVs). The primary impetus for autonomous driving lies in its potential to ensure vehicle safety, a goal that requires an accurate determination of location, heading, and speed. Although sensors can directly obtain these measurements, they are often affected by noise and disturbances with unknown but bounded (UBB) distributions. To mitigate these effects, state estimation techniques are commonly employed, leveraging sensor fusion. This work aims to design an FDI methodology that continuously evaluates the accuracy of the state estimation algorithm in an AV. In order to achieve this goal, various observation techniques for robust FDI are compared, including a novel approach of EKF formulated within the LPV framework, named LPV-EKF. A zonotopic LPV-EKF observer is implemented to perform FDI on both state estimation inputs and outputs, considering an UBB noise distribution. The proposed methodology for the identification of anomalies is optimised to minimise the detection time in real world scenarios. The experimental results for FDI, collected from an autonomous Renault Zoe (SAE Level 3), are analysed and discussed., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fault diagnosis using interval data-driven LPV observers and structural analysis

  • Fang, Xin
  • Blesa Izquierdo, Joaquim|||0000-0002-5626-3753
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This paper presents a Fault Detection and Isolation (FDI) method that combines Structural Analysis (SA) and machine learning data-driven techniques. The adaptive network fuzzy inference system (ANFIS) is used to obtain a model of the real system to be monitored using historical data from non-faulty scenarios. The structure of the model is given by the SA by means of graphical or textual description of the system. The obtained model is formulated as an observer where unknown but bounded process and sensor noises are considered. Then, LPV observers are used to carry out the fault diagnosis using model residuals. Once observers detect a residual inconsistency, a fault alarm is raised and the fault isolation triggered. Fault isolation is carried out through the transformation of residuals using the Kramer function and the Dempster-Shafer theory. The proposed fault isolation method considers the plausibility of the activation of each residual and the SA information to provide the most probable fault. Finally, a well-known four-tanks system illustrates the performance and results of the proposed method., This work has been co-financed by the Spanish Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and L-BEST (PID2020115905RB-C21)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Zonotopic-tube-based LPV motion planner for safety coordination of autonomous vehicles

  • Carrizosa Rendón, Álvaro|||0000-0002-5031-8469
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
© 2023 The Authors. This is an open access article under the CC BY-NC-ND license. Peer review under responsibility of International Federation of Automatic Control., In this paper an optimization-based solution to the collision avoidance challenge for autonomous vehicles is proposed. The presented approach consists in an online motion planner designed to define a feasible and efficient path which implicitly guarantees safety manoeuvres in dynamic surroundings. The fact of considering moving obstacles inside the motion planner increases the complexity of the problem while forces it to be executed more frequently as others. To reduce its computational complexity, this approach proposes a two stages translation of the commonly used non-linear optimization-based structure into a QP formulation which can be easily solved. The first stage is based on the use of LPV matrices in the dynamic constraints of the vehicle. The second stage consists in computing linear expressions by set propagation to obtain the set of permitted inputs and reachable states which guarantee safety conditions., This work has been co-financed by the Spanish State Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and MASHED (TED2021-129927B-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Distributed set-based planning in autonomous vehicles

  • Facerías Pelegrí, Marc
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Stancu, Alexandru
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Autonomous vehicles require sophisticated planning algorithms to navigate safely and efficiently in complex environments. Traditional centralised planning approaches face scalability challenges, especially as the number of agents increases. Distributed planning strategies have emerged as a promising solution to overcome these limitations. This paper presents a novel approach to distributed set-based planning for autonomous vehicles. Each vehicle can autonomously plan its path by leveraging set-based representations of possible trajectories while considering uncertainty and dynamic environment changes. The proposed method enables vehicles to collaborate efficiently while maintaining decentralised decision-making capabilities, thus enhancing scalability and robustness. Furthermore, safe trajectories are derived by contemplating system uncertainties through set theory., This work has been partially founded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Actuator fault estimation using optimization-based learning techniques for linear parameter varying systems with unreliable scheduling parameters

  • Sanjuan Gómez, Adrián
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Sarrate Estruch, Ramon|||0000-0002-9979-5899
A novel fault diagnosis procedure is proposed in this paper to estimate faults using a linear parameter varying (LPV) model whose scheduling parameters depend on the fault. A wrong determination of the operating conditions could lead the system to an undesired performance or even to an unstable situation, when classical fault diagnosis approaches are applied. This paper addresses this issue by formulating fault diagnosis as a dynamic optimization problem, solved by using a novel hybrid technique that combines a Luenberger-based observer with artificial intelligent (AI) optimization-based algorithms. The observer supervises the health of the system, while AI-based algorithms are able to reconstruct the faulty signal in real-time when the observer determines that the system is under a fault. The efficiency of the proposed fault diagnosis scheme, the three AI-based algorithms based on artificial bee colony and particle swarm optimization, and the gradient-based algorithm developed in this paper, are assessed using a numerical example., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-100), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014-2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Design of shifting output-feedback controllers for LPV systems subject to time-varying saturations

  • Ruiz Royo, Adrián|||0000-0002-0387-4235
  • Rotondo, Damiano|||0000-0002-8855-5582
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
This paper considers the problem of designing a shifting output-feedback controller for polytopic linear parameter-varying (LPV) systems subject to time-varying saturations. By means of the LPV framework and the use of the Lyapunov theory, the shifting paradigm concept, and the ellipsoidal invariant theory, a linear matrix inequality (LMI)-based methodology for the controller's design is proposed. The resulting gain-scheduled controller holds the control action in the linearity region of the actuators and regulates online the closed-loop convergence taking into account the instantaneous saturation limit values. The proposed approach is validated by means of an illustrative example., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. PID2020-114244RB-I00). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the University of Stavanger through the project IN-12267. A. Ruiz is also supported by the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya, the European Social Fund (ESF) and AGAUR under a FI SDUR grant (ref. 2020 FI-SDUR 00097)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Unknown input observer scheme for open-flow irrigation channels

  • Arango Restrepo, Juan Pablo
  • Conde, Gregory
  • Duviella, Eric
  • Etienne, Lucien
  • Langueh, Kokou
  • Segovia Castillo, Pablo|||0000-0003-3593-907X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Ocampo-Martínez, Carlos|||0000-0001-9251-6044
  • Quijano Silva, Nicanor
In agriculture, most of the water is transported by networks of open channel irrigation systems (OCIS). To ensure an optimal operation of this type of systems, it is very important to have accurate monitoring of all the system state variables. In order to perform robust estimation mitigating the effect of unknown user demands, an unknown input observer for one sided Lipschitz (OSL) quadratically inner bounded (QIB) systems is proposed. The proposed UIO scheme is assessed in a case study based on the Corning channel in California that is modelled uisng material and energy balances. The modeling methodology includes inflows and outflows of matter, along with a transition flow which models the effect of potential energy (channel slope) and kinetic energy (velocity in the transport of matter and frictional losses). The objective of this paper is to show that with the UIO for QIB-OSL systems, costs could be reduced in the purchase of sensors, since the observer is capable of reconstructing the upstream heights from the measurements of the downstream heights, which will be subject to noise and unknown inputs (in this case, user demands)., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SaCoAV (ref. PID2020-114244RB-I00) and L-BEST (PID2020-115905RB-C21)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Distributed lane selection in autonomous platoon coordination

  • Facerías Pelegrí, Marc
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Stancu, Alexandru
This paper proposes a novel non-linear lane selection algorithm for autonomous vehicles based on the Optimality Condition Decomposition algorithm. An initial algorithm based on mixed integer quadratic programming was studied, which proved untreatable due to its computational complexity, leading to similar formulations that do not require such a nature in their variables. As a result, a cascade strategy combining both distributed local planning and decision-making layers is implemented, leading to promising results. The proposed approach can determine paths that consider individual goals and the environment so that agents can collaborate to establish a formation that re-configures online, allowing vehicles to reach their individual goals., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Behavior-aware online prediction of obstacle occupancy using zonotopes

  • Carrizosa Rendón, Álvaro|||0000-0002-5031-8469
  • Zhou, Jian
  • Frisk, Erik
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
© 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Predicting the motion of surrounding vehicles is key to safe autonomous driving, especially in unstructured environments without prior information. This paper proposes a novel online method to accurately predict the occupancy sets of surrounding vehicles based solely on motion observations. The approach is divided into two stages: first, an Extended Kalman Filter and a Linear Programming (LP) problem are used to estimate a compact zonotopic set of control actions; then, a reachability analysis propagates this set to predict future occupancy. The effectiveness of the method has been validated through simulations in an urban environment, showing accurate and compact predictions without relying on prior assumptions or prior training data., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00) and by the DGR of Generalitat de Catalunya (SAC group ref. 2021/SGR/278). J. Zhou and E. Frisk acknowledge the support by Strategic Research Area at Linkoping- ¨ Lund in Information Technology (ELLIIT)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reinforcement learning versus model predictive control on greenhouse climate control

  • Morcego Seix, Bernardo|||0000-0002-6944-7519
  • Yin, Wenjie
  • Boersma, Sjoerd
  • van Henten, Eldert
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Sun, Congcong
The greenhouse system plays a crucial role to ensure an adequate supply of fresh food for the growing global population. However, maintaining an optimal growing climate within a greenhouse requires resources and operational costs. To achieve economical and sustainable crop growth, efficient climate control in greenhouse production is paramount. Model Predictive Control (MPC) and Reinforcement Learning (RL) are the two approaches representing model-based and learning-based control, respectively. Each one has its own way to formulate control problems, define control objectives, and seek for optimal control actions that provide sustainable crop growth. Although certain forms of MPC and RL have been applied to greenhouse climate control, limited research has comprehensively analyzed the connections, differences, advantages, and disadvantages between these two approaches, both mathematically and in terms of performance. Therefore, this paper aims to address this gap by: (1) introducing a novel RL approach that utilizes Deep Deterministic Policy Gradient (DDPG) for large and continuous state–action space environments; (2) formulating the MPC and RL approaches for greenhouse climate control within a unified framework; (3) exploring the mathematical connections and differences between MPC and RL; (4) conducting a simulation study to analyze and compare the performance of MPC and RL; (5) presenting and interpreting the comparative results to provide valuable insights for the application of these control approaches in different scenarios. By undertaking these objectives, this paper seeks to contribute to the understanding and advancement of both MPC and RL methods in greenhouse climate control, fostering more informed decision-making regarding their selection and implementation based on specific requirements and constraints., This work has been partially funded by the Sector Plan for Science and Technology established by the Dutch Ministry of Education, Culture and Science. It has also been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. PID2020-114244RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Implementación de MPC para el seguimiento de trayectorias en un robot móvil omnidireccional

  • Villalba Aguilera, Elena|||0009-0007-0441-3821
  • Blesa Izquierdo, Joaquim|||0000-0002-5626-3753
  • Ponsa Asensio, Pere|||0000-0001-6306-7251
Derechos de autor 2025 Elena Villalba-Aguilera, Joaquim Blesa, Pere Ponsa. Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0), Este trabajo presenta una arquitectura de control para un robot móvil omnidireccional de tres ruedas, validada experimentalmente en la plataforma Robotino 4. La solución evita el uso de ROS (Robot Operating System) al delegar el cálculo del controlador predictivo a una estación externa con MATLAB, la cual se comunica con el robot mediante TCP/IP (Transmission Control Protocol/Internet Protocol). El robot ejecuta un programa en C++ que recibe consignas de velocidad y envía la odometría a la estación de control. Se ha implementado un control LPV-MPC (Linear Parameter Varying Model Predictive Control) que regula simultáneamente la posición (x, y) y la orientación ( ¿),considerando restricciones sobre velocidad, aceleración y posición. El modelo se linealiza en tiempo real, lo que permite el seguimiento de trayectorias bajo condiciones realistas. La solución se ha validado mediante una trayectoria de referencia ovalada que muestra un buen rendimiento y errores acotados. La arquitectura es modular y escalable, y puede extenderse con planificación en entornos dinámicos o integración futura con ROS 2., La autora principal agradece sinceramente el apoyo financiero proporcionado por la Universitat Politècnica de Catalunya y Banco Santander a través de la beca predoctoral FPI-UPC. Este trabajo ha sido financiado parcialmente por la Agencia Española de Investigación (AEI) mediante el proyecto SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Economic linear parameter varying model predictive control of the aeration system of a wastewater treatment plant

  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Khoury, Boutrous
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Quevedo Casín, Joseba Jokin|||0000-0002-7827-2896
  • Pascual Pañach, Josep
  • de Campos, Sergi
This work proposes an economic model predictive control (EMPC) strategy in the linear parameter varying (LPV) framework for the control of dissolved oxygen concentrations in the aerated reactors of a wastewater treatment plant (WWTP). A reduced model of the complex nonlinear plant is represented in a quasi-linear parameter varying (qLPV) form to reduce computational burden, enabling the real-time operation. To facilitate the formulation of the time-varying parameters which are functions of system states, as well as for feedback control purposes, a moving horizon estimator (MHE) that uses the qLPV WWTP model is proposed. The control strategy is investigated and evaluated based on the ASM1 simulation benchmark for performance assessment. The obtained results applying the EMPC strategy for the control of the aeration system in the WWTP of Girona (Spain) show its effectiveness., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020- 114244RB-I00), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014–2020 (ref. 001-P-001643 Looming Factory), and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Stability analysis and control of TCP-based cyber-physical systems using the linear parameter varying approach

  • Barchinezhad, Soheila
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Systems Science on 21/10/2025, available online: https://doi.org/10.1080/00207721.2025.2568713., This paper introduces a novel approach to stability analysis and control for TCP-based Cyber-Physical Systems (CPSs) using the Linear Parameter Varying (LPV) approach considering communication network delays and dynamics. The closed-loop CPS is modelled considering the transmission control protocol (TCP) as the network protocol. By integrating network dynamics and delay, the entire closed-loop system is represented as a delay dependent LPV system. Subsequently, a sufficient stability condition for the augmented system is established in terms of Linear Matrix Inequalities (LMIs), and the maximum allowable transfer interval (MATI) by considering network parameteres is calculated. Additionally, an LPV state feedback controller is designed for the augmented system which adaptively compensates the effect of network dynamics and parameteres on the plant. In this way, the proposed stabilising controller for CPSs is able to deal with the potential destabilisation effects related to network delays. Finally, the proposed approach is evaluated using a widely used application case study in networked control systems literature., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project485 SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Safe motion planner for autonomous driving based on LPV MPC and reachability analysis

  • Carrizosa Rendón, Álvaro|||0000-0002-5031-8469
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
This article presents an innovative optimization-based solution to the collision avoidance challenge for autonomous vehicles. The presented approach consists in an online motion planner designed to define feasible and efficient paths able to deal with dynamic surroundings while implicitly ensure safety in the proposed maneuvers. The fact of considering moving obstacles inside the motion planner increases the complexity of the problem while forces it to be executed more frequently as others. To reduce this computational complexity, the approach presented counts with a two stages translation of the commonly used non-linear optimization-based structure into a QP formulation which can be easily solved. The first stage is based on the use of LPV matrices in the dynamic constraints of the vehicle. The second stage consists in performing a reachability analysis based on set propagation to obtain linear expressions of the permitted inputs and reachable states which guarantee safety conditions., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00) and by the DGR of Generalitat de Catalunya, Spain (SAC group ref. 2017/SGR/482)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Robust unknown Input observer design for uncertain and noisy OSL-QIB nonlinear systems

  • Arango Restrepo, Juan Pablo
  • Etienne, Lucien
  • Duviella, Eric
  • Langueh, Kokou
  • Segovia Castillo, Pablo|||0000-0003-3593-907X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper, the problem of designing a robust unknown input observer (RUIO) for quadratically inner bounded (QIB), one-sided Lipschitz (OSL) nonlinear systems in the presence of noise and unknown inputs is addressed. This RUIO is formulated as a convex optimization problem where parameter uncertainty and noise are considered. Sufficient conditions for observer gain synthesis are shown to be equivalent to solving a finite set of Linear Matrix Inequalities (LMIs) and a Linear Matrix Equality (LME). Two illustrative examples, a bioreactor for biomass production from substrate consumption and a robot manipulator, are used to test the effectiveness of the approach in the presence of unknown inputs, parameter uncertainty, and measurement noise., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SaCoAV (ref. PID2020-114244RB-I00) and L-BEST (PID2020- 115905RB-C21)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Fault prognosis approach using data-driven structurally generated residuals

  • Fang, Xin
  • Blesa Izquierdo, Joaquim|||0000-0002-5626-3753
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a fault prognosis approach using data-driven structurally generated residuals. It assumes that a set of residuals generated using structural analysis (SA) and identified using data-driven approach are available. Residuals are used for fault detection purposes activating fault signals when residual values reach anomalous values. In addition, it is possible to predict future faults by means of the detection of anomalous residual deviations. Once an anomalous change in the residual trend has been detected, it is proceed to estimate when this residual deviation will result in a fault detection and therefore which will be the Remaining Useful Life (RUL) time of the system. For this purpose, the future residual evolution is estimated by means of a regressor function. Nominal and interval parameters of regressor function are estimated with available residual data providing nominal and interval values of the RUL of the system. A brushless direct current (BLDC) motor is used as the application case study to illustrate the performance of proposed approach., This work has been co-financed by the Spanish ResearchAgency (AEI) through the projects SaCoAV (ref. MINECOPID2020-114244RB-I00)andL-BEST(PID2020115905RB-C21)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A multilayer control strategy for the Calais canal

  • Segovia Castillo, Pablo|||0000-0003-3593-907X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Duviella, Eric
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This article presents the design of a control strategy for the Calais canal, a navigation canal located in a lowland area in northern France that is affected by tides. Moreover, the available actuators are discrete-valued and the hierarchy of operational objectives is time-varying. All these circumstances render water level regulation of the Calais canal a challenging problem. In view of this situation, the design of the overall control architecture is divided into a sequence of structured tasks, which are distributed among layers. The upper layer determines the current operating mode based on the analysis of several environmental and operational aspects. Information regarding the current mode is taken into account at the intermediate layer to select the appropriate optimization-based control problem, which is solved using lexicographic minimization. The optimal control setpoints are determined and sent to the lower layer, where scheduling problems are solved to select low-level control actions from a finite set to minimize the mismatch with respect to the optimal setpoints. Different realistic simulation scenarios are tested to demonstrate the effectiveness of the proposed approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A two-level economic health-aware LPV MPC of a wind turbine

  • Khoury, Boutrous
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper considers the possibility of a direct incorporation of wind turbine prognostic information in the framework of model predictive control culminating in a Health Aware MPC design. The wind turbine blades, the chosen component of the study, are subjected to flapwise edge root moment, as a stress component, to acquire important prognostic information of degradation via the well-established stiffness degradation methodology. An optimization problem is solved by considering segmented degradation functions based on accumulated stress values on the blades. A two-level Linear Parameter Varying control scheme is proposed to allow for wind turbine control at different operating regions of wind and also to circumvent non-linearities in the MPC setup. The controller establishes a trade-off between standard wind turbine control objectives and the mitigation of component degradation concerning wind turbine blades. A 5 MW benchmark wind turbine is used as a case study for illustrative purposes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Robust data-driven TS MPC-based reference governor for an autonomous racing vehicle considering battery state of charge

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A reference governor approach based on model predictive control (MPC-RG) for an autonomous racing vehicle is developed in this work. This control strategy avoids constraint violations and includes online health management capabilities by solving a multi-objective optimization problem. In this case, a trade-off between the maximization of the state of charge of the battery and the longitudinal velocity, even the minimization of the control actions variation is carried out. In turn, the invariant zonotopic sets analysis ensures the convergence of states to a stable region. On the other hand, the proposed control scheme also combines a robust states feedback linear quadratic regulator (LQR) with a Kalman filter (KF) estimator to compensate for model uncertainty and exogenous disturbances, as well as, to estimate the unmeasured lateral velocity. Moreover, to represent the non-linear behaviour of the vehicle, a data-driven neuro-fuzzy Takagi-Sugeno (TS) model is employed. The developed approach is tested and evaluated in realistic environments by means of a simulated 1/10 Scale RC car., This work has been co-financed by the Spanish Research Agency (AEI) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Robust LPV fault tolerant tracking control using set-based approaches for autonomous vehicles

  • Zhang, Shuang
  • Ifqir, Sara
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This article proposes a zonotopic filtering-based active fault tolerant tracking control (FTTC) scheme for autonomous vehicles, modeled as linear parameter-varying (LPV) systems subject to disturbances, noise and actuator faults. A zonotopic Kalman filter (ZKF) is proposed to simultaneously estimate both the unmeasurable states and actuator faults. Then, an FTTC is developed, including a reference input, a state-feedback controller, and a fault compensation mechanism. To minimize the impact of uncertainties on the estimates, the optimal filter gain is designed by minimizing the Frobenius norm of the state bounding zonotope. To reduce the tracking error and attenuate the disturbance effects, the controller design ensures the H8 performance of the uncertain tracking error dynamics by constructing a zonotopic Lyapunov function. Finally, the proposed scheme is applied to vehicle lateral dynamics for reference path-tracking control in the presence of actuator faults, and its effectiveness is demonstrated through simulations using real collected data., This work has been co-financed in part by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV under Grant MINECO PID2020-114244RB-I00; in part by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014–2020 under Grant 001-P-001643 Looming Factory; in part by the DGR of Generalitat de Catalunya (SAC group under Grant 2017/SGR/482); and in part by the Chinese Scholarship Council (CSC) under Grant 202006120006. (Corresponding author: Vicenç Puig.), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A zonotopic FDI approach with LPV-based EKF in autonomous vehicles

  • Conejo Barceló, Carlos|||0009-0007-7233-5650
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Morcego Seix, Bernardo|||0000-0002-6944-7519
  • Navas, Francisco
  • Milanés, Vicente
This paper presents a fault detection and isolation approach for state estimation in autonomous vehicles, enhancing safety through the assurance of accurate measurement acquisition. Using a zonotopic method to guarantee robustness against unknown-but-bounded measurement noises, this study introduces a novel formulation of the Extended Kalman Filters, using the Linear Parameter-Varying modelling technique. Its performance is assessed alongside other state estimation methods. Experiments on a Renault Zoe (SAE level 3) enable a safety validation for the FDI process, finding the critical sensors for the state estimation algorithm., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Robust MPC-RG for an autonomous racing vehicle considering obstacles and the battery state of charge

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
The design of a controller able to deal with uncertainties and physical constraints plays an essential role in fast and complex systems. Then, a reference governor approach based on model predictive control (MPC-RG) for an autonomous racing vehicle is proposed. The MPC-RG guarantees constraint satisfaction and recursive feasibility online while including obstacle avoidance capability and energy-aware management by solving a multi-objective optimization problem. In particular, a trade-off between maximizing the longitudinal velocity and the state of charge of the vehicle’s battery, as well as minimizing the variation of control actions is adopted. Moreover, the proposed MPC-RG is combined with a state-feedback linear quadratic regulator (LQR) and a Kalman filter (KF) to compensate for modeling errors and exogenous disturbances, as well as to estimate the unmeasured lateral velocity. In fact, for control and estimation purposes, a data-driven Takagi–Sugeno (TS) model trained by an adaptive neuro-fuzzy inference network is used. The performance of the developed approach is assessed in simulations using a well-known case study based on a scale RC electric car., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017 / SGR / 482). The work is also supported by a FI AGAUR grant (Ref. 2021FI-B1 00097)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A set-based uncertainty quantification of evolving fuzzy models for data-driven prognostics

  • Khoury, Boutrous
  • Bessa, Iury
  • Nejjari Akhi-Elarab, Fatiha|||0000-0001-9118-632X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
Recent years have seen a great deal of innovation in the field of systems prognostics and health management. However, even with these advancements, some pertinent issues related with uncertainty in remaining useful life predictions are still open for investigation. One such area of interest is on how to account for the distribution of these predictions such that all uncertainty sources are duly captured and represented. Practically, these uncertainty quantification procedures must be computationally feasible for real-life deployment and reflect real-life situations devoid of strong assumptions. This article thus, proposes a data-based prognostics technique that uses a set-based quantification of uncertainty based on the set-membership paradigm, the interval predictor approach. The methodology is applied in the framework of the Evolving Ellipsoidal Fuzzy Information Granule which has recently proven its potency in prognostics applications. As a case study, the method is tested on the prognostics of insulated bipolar transistors utilising an accelerated aging IGBT dataset from the NASA Ames Research Center., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Fault detection using data-driven LPV state estimation based on structural analysis and ANFIS

  • Fang, Xin
  • Blesa Izquierdo, Joaquim|||0000-0002-5626-3753
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a data-driven fault detection method combining structural analysis (SA) and machine learning data-driven algorithms. Given a graphic (or textual) system description and the available inputs/outputs measurements, the structure of analytical redundancy relations (ARRs) between some inputs and outputs can be determined with the aid of the SA of the system. Then, using a machine learning data-driven approach applied to historical data, analytical relations between inputs and outputs can be obtained. Thereby, instead of finding ARRs from physical mathematical model, ARRs are obtained combining SA and data-driven approaches. In this paper, the adaptive network fuzzy inference system (ANFIS) data-driven approach is used to implement the diagnosis system. Once the ANFIS model has been identified, it is reformulated in linear parameter varying (LPV) form. Then, a fault detection scheme based on a LPV Kalman filter and pole placement method is developed. A well-known case study based on a four-tanks system is used for illustrative purposes., This work has been co-financed by the Spanish Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and L-BEST (PID2020-115905RB-C2I)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Interval-based fault diagnosis in wind turbines using structural analysis and gaussian process regression*

  • Pérez Pérez, Esvan de Jesús
  • Valencia Palomo, Guillermo
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
  • Santos Ruiz, Ildeberto
  • Guzmán Rabasa, Julio Alberto
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a hybrid fault diagnosis approach for wind turbines that integrates structural analysis through Analytical Redundancy Relations (ARRs) with datadriven modeling using Gaussian Process Regression (GPR). The proposed method leverages the physical structure of the system to define input-output dependencies and trains GPR estimators on fault-free operational data to predict key subsystem outputs. Residuals are computed by comparing sensor measurements with GPR predictions, and faults are detected using a combination of interval-based thresholds and Cumulative Sum (CUSUM) control charts. The proposed approach is validated on a simulated 5-MW wind turbine benchmark model under realistic operating conditions. Various fault scenarios are injected in the pitch actuator, drivetrain, and generator subsystems. Results demonstrate the fault diagnosis accuracy, robustness, and early detection capability across diverse fault types., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00 )., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Unknown input observer design for LPV OSL-QIB nonlinear systems

  • Arango Restrepo, Juan Pablo
  • Duviella, Eric
  • Etienne, Lucien
  • Langueh, Kokou
  • Segovia Castillo, Pablo|||0000-0003-3593-907X
  • Puig Cayuela, Vicenç|||0000-0002-6364-6429
This paper presents the design of an unknown input observer (UIO) for linear parameter-varying (LPV) one-sided Lipschitz quadratically inner-bounded (OSL-QIB) systems. This family of systems extends conventional LPV systems by adding nonlinear terms to improve observer performance and reduce errors due to the transformation of a nonlinear system to its LPV version (either because the nonlinearities are difficult to wrap as it is in the polytopic case, or because the Jacobian does not yield a good approximation). The UIO is initially designed in the absence of noise, allowing to establish LMI conditions to guarantee the convergence of the error dynamics, and then sensor noise is explicitly considered in the design so that its effiect can be mitigated. Finally, a case study based on the Corning channel benchmark is used to test the performance of the UIO in the presence of unknown inputs (e.g., leakage, evaporation or rain)., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SaCoAV (ref. PID2020-114244RB-I00) and L-BEST (PID2020-115905RB-C21)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A two-level economic health-aware LPV MPC of a wind turbine

  • Khoury, Boutrous
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper considers the possibility of a direct incorporation of wind turbine prognostic information in the framework of model predictive control culminating in a Health Aware MPC design. The wind turbine blades, the chosen component of the study, are subjected to flapwise edge root moment, as a stress component, to acquire important prognostic information of degradation via the well-established stiffness degradation methodology. An optimization problem is solved by considering segmented degradation functions based on accumulated stress values on the blades. A two-level Linear Parameter Varying control scheme is proposed to allow for wind turbine control at different operating regions of wind and also to circumvent non-linearities in the MPC setup. The controller establishes a trade-off between standard wind turbine control objectives and the mitigation of component degradation concerning wind turbine blades. A 5 MW benchmark wind turbine is used as a case study for illustrative purposes., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reinforcement learning versus model predictive control on greenhouse climate control

  • Morcego Seix, Bernardo
  • Yin, Wenjie
  • Boersma, Sjoerd
  • van Henten, Eldert
  • Puig Cayuela, Vicenç
  • Sun, Congcong
The greenhouse system plays a crucial role to ensure an adequate supply of fresh food for the growing global population. However, maintaining an optimal growing climate within a greenhouse requires resources and operational costs. To achieve economical and sustainable crop growth, efficient climate control in greenhouse production is paramount. Model Predictive Control (MPC) and Reinforcement Learning (RL) are the two approaches representing model-based and learning-based control, respectively. Each one has its own way to formulate control problems, define control objectives, and seek for optimal control actions that provide sustainable crop growth. Although certain forms of MPC and RL have been applied to greenhouse climate control, limited research has comprehensively analyzed the connections, differences, advantages, and disadvantages between these two approaches, both mathematically and in terms of performance. Therefore, this paper aims to address this gap by: (1) introducing a novel RL approach that utilizes Deep Deterministic Policy Gradient (DDPG) for large and continuous state–action space environments; (2) formulating the MPC and RL approaches for greenhouse climate control within a unified framework; (3) exploring the mathematical connections and differences between MPC and RL; (4) conducting a simulation study to analyze and compare the performance of MPC and RL; (5) presenting and interpreting the comparative results to provide valuable insights for the application of these control approaches in different scenarios. By undertaking these objectives, this paper seeks to contribute to the understanding and advancement of both MPC and RL methods in greenhouse climate control, fostering more informed decision-making regarding their selection and implementation based on specific requirements and constraints., This work has been partially funded by the Sector Plan for Science and Technology established by the Dutch Ministry of Education, Culture and Science. It has also been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. PID2020-114244RB-I00)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A set-based uncertainty quantification of evolving fuzzy models for data-driven prognostics

  • Khoury, Boutrous
  • Bessa, Iury
  • Nejjari Akhi-Elarab, Fatiha
  • Puig Cayuela, Vicenç
Recent years have seen a great deal of innovation in the field of systems prognostics and health management. However, even with these advancements, some pertinent issues related with uncertainty in remaining useful life predictions are still open for investigation. One such area of interest is on how to account for the distribution of these predictions such that all uncertainty sources are duly captured and represented. Practically, these uncertainty quantification procedures must be computationally feasible for real-life deployment and reflect real-life situations devoid of strong assumptions. This article thus, proposes a data-based prognostics technique that uses a set-based quantification of uncertainty based on the set-membership paradigm, the interval predictor approach. The methodology is applied in the framework of the Evolving Ellipsoidal Fuzzy Information Granule which has recently proven its potency in prognostics applications. As a case study, the method is tested on the prognostics of insulated bipolar transistors utilising an accelerated aging IGBT dataset from the NASA Ames Research Center., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Robust data-driven TS MPC-based reference governor for an autonomous racing vehicle considering battery state of charge

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A reference governor approach based on model predictive control (MPC-RG) for an autonomous racing vehicle is developed in this work. This control strategy avoids constraint violations and includes online health management capabilities by solving a multi-objective optimization problem. In this case, a trade-off between the maximization of the state of charge of the battery and the longitudinal velocity, even the minimization of the control actions variation is carried out. In turn, the invariant zonotopic sets analysis ensures the convergence of states to a stable region. On the other hand, the proposed control scheme also combines a robust states feedback linear quadratic regulator (LQR) with a Kalman filter (KF) estimator to compensate for model uncertainty and exogenous disturbances, as well as, to estimate the unmeasured lateral velocity. Moreover, to represent the non-linear behaviour of the vehicle, a data-driven neuro-fuzzy Takagi-Sugeno (TS) model is employed. The developed approach is tested and evaluated in realistic environments by means of a simulated 1/10 Scale RC car., This work has been co-financed by the Spanish Research Agency (AEI) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Behavior-aware online prediction of obstacle occupancy using zonotopes

  • Carrizosa Rendón, Álvaro
  • Zhou, Jian
  • Frisk, Erik
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
© 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Predicting the motion of surrounding vehicles is key to safe autonomous driving, especially in unstructured environments without prior information. This paper proposes a novel online method to accurately predict the occupancy sets of surrounding vehicles based solely on motion observations. The approach is divided into two stages: first, an Extended Kalman Filter and a Linear Programming (LP) problem are used to estimate a compact zonotopic set of control actions; then, a reachability analysis propagates this set to predict future occupancy. The effectiveness of the method has been validated through simulations in an urban environment, showing accurate and compact predictions without relying on prior assumptions or prior training data., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00) and by the DGR of Generalitat de Catalunya (SAC group ref. 2021/SGR/278). J. Zhou and E. Frisk acknowledge the support by Strategic Research Area at Linkoping- ¨ Lund in Information Technology (ELLIIT)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Unknown input observer scheme for open-flow irrigation channels

  • Arango Restrepo, Juan Pablo
  • Conde, Gregory
  • Duviella, Eric
  • Etienne, Lucien
  • Langueh, Kokou
  • Segovia Castillo, Pablo
  • Puig Cayuela, Vicenç
  • Ocampo-Martínez, Carlos
  • Quijano Silva, Nicanor
In agriculture, most of the water is transported by networks of open channel irrigation systems (OCIS). To ensure an optimal operation of this type of systems, it is very important to have accurate monitoring of all the system state variables. In order to perform robust estimation mitigating the effect of unknown user demands, an unknown input observer for one sided Lipschitz (OSL) quadratically inner bounded (QIB) systems is proposed. The proposed UIO scheme is assessed in a case study based on the Corning channel in California that is modelled uisng material and energy balances. The modeling methodology includes inflows and outflows of matter, along with a transition flow which models the effect of potential energy (channel slope) and kinetic energy (velocity in the transport of matter and frictional losses). The objective of this paper is to show that with the UIO for QIB-OSL systems, costs could be reduced in the purchase of sensors, since the observer is capable of reconstructing the upstream heights from the measurements of the downstream heights, which will be subject to noise and unknown inputs (in this case, user demands)., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SaCoAV (ref. PID2020-114244RB-I00) and L-BEST (PID2020-115905RB-C21)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fault diagnosis using interval data-driven LPV observers and structural analysis

  • Fang, Xin
  • Blesa Izquierdo, Joaquim
  • Puig Cayuela, Vicenç
This paper presents a Fault Detection and Isolation (FDI) method that combines Structural Analysis (SA) and machine learning data-driven techniques. The adaptive network fuzzy inference system (ANFIS) is used to obtain a model of the real system to be monitored using historical data from non-faulty scenarios. The structure of the model is given by the SA by means of graphical or textual description of the system. The obtained model is formulated as an observer where unknown but bounded process and sensor noises are considered. Then, LPV observers are used to carry out the fault diagnosis using model residuals. Once observers detect a residual inconsistency, a fault alarm is raised and the fault isolation triggered. Fault isolation is carried out through the transformation of residuals using the Kramer function and the Dempster-Shafer theory. The proposed fault isolation method considers the plausibility of the activation of each residual and the SA information to provide the most probable fault. Finally, a well-known four-tanks system illustrates the performance and results of the proposed method., This work has been co-financed by the Spanish Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and L-BEST (PID2020115905RB-C21)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Safe planning using mixed-integer programming for autonomous vehicles coordination

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
  • Sarrate Estruch, Ramon
Coordination between intelligent vehicles is essential for the advancement of fully autonomous driving. Ensuring safety is the primary focus of this challenge. This paper proposes a safe model predictive planner (MPP) for vehicle coordination, which is robust against uncertainty and noise. The planner provides a feasible route, taking into account the tube of possible trajectories of neighbouring vehicles. To achieve this objective, a linear parameter-varying (LPV) prediction model of the vehicle is used. For obstacle avoidance and overtaking maneuvers, mixed-integer linear inequalities as constraints in the MPP formulation are added. Regarding uncertainty and noise, both are assumed to be unknown but bounded and zonotopes are used to enclose and propagate them. Similarly, a zonotopic optimal filter compensates for the measurement noises and estimates the lateral velocity not provided by the vehicle’s instrumentation. The proposed coordination approach is evaluated in a simulation environment, specifically in an aggressive regime with maximum velocity, using a 1/10 scale electric car., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (Ref. MINECO PID2020-114244RB-I00) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2017/SGR/482). The work is also supported by the Agency for Management of University and Research Grants (FI AGAUR) (Ref. 2021FI-B1 00097), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A zonotopic FDI approach with LPV-based EKF in autonomous vehicles

  • Conejo Barceló, Carlos
  • Puig Cayuela, Vicenç
  • Morcego Seix, Bernardo
  • Navas, Francisco
  • Milanés, Vicente
This paper presents a fault detection and isolation approach for state estimation in autonomous vehicles, enhancing safety through the assurance of accurate measurement acquisition. Using a zonotopic method to guarantee robustness against unknown-but-bounded measurement noises, this study introduces a novel formulation of the Extended Kalman Filters, using the Linear Parameter-Varying modelling technique. Its performance is assessed alongside other state estimation methods. Experiments on a Renault Zoe (SAE level 3) enable a safety validation for the FDI process, finding the critical sensors for the state estimation algorithm., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A multilayer control strategy for the Calais canal

  • Segovia Castillo, Pablo
  • Puig Cayuela, Vicenç
  • Duviella, Eric
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This article presents the design of a control strategy for the Calais canal, a navigation canal located in a lowland area in northern France that is affected by tides. Moreover, the available actuators are discrete-valued and the hierarchy of operational objectives is time-varying. All these circumstances render water level regulation of the Calais canal a challenging problem. In view of this situation, the design of the overall control architecture is divided into a sequence of structured tasks, which are distributed among layers. The upper layer determines the current operating mode based on the analysis of several environmental and operational aspects. Information regarding the current mode is taken into account at the intermediate layer to select the appropriate optimization-based control problem, which is solved using lexicographic minimization. The optimal control setpoints are determined and sent to the lower layer, where scheduling problems are solved to select low-level control actions from a finite set to minimize the mismatch with respect to the optimal setpoints. Different realistic simulation scenarios are tested to demonstrate the effectiveness of the proposed approach., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Zonotopic-tube-based LPV motion planner for safety coordination of autonomous vehicles

  • Carrizosa Rendón, Álvaro
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
© 2023 The Authors. This is an open access article under the CC BY-NC-ND license. Peer review under responsibility of International Federation of Automatic Control., In this paper an optimization-based solution to the collision avoidance challenge for autonomous vehicles is proposed. The presented approach consists in an online motion planner designed to define a feasible and efficient path which implicitly guarantees safety manoeuvres in dynamic surroundings. The fact of considering moving obstacles inside the motion planner increases the complexity of the problem while forces it to be executed more frequently as others. To reduce its computational complexity, this approach proposes a two stages translation of the commonly used non-linear optimization-based structure into a QP formulation which can be easily solved. The first stage is based on the use of LPV matrices in the dynamic constraints of the vehicle. The second stage consists in computing linear expressions by set propagation to obtain the set of permitted inputs and reachable states which guarantee safety conditions., This work has been co-financed by the Spanish State Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and MASHED (TED2021-129927B-I00)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Economic linear parameter varying model predictive control of the aeration system of a wastewater treatment plant

  • Nejjari Akhi-Elarab, Fatiha
  • Khoury, Boutrous
  • Puig Cayuela, Vicenç
  • Quevedo Casín, Joseba Jokin
  • Pascual Pañach, Josep
  • de Campos, Sergi
This work proposes an economic model predictive control (EMPC) strategy in the linear parameter varying (LPV) framework for the control of dissolved oxygen concentrations in the aerated reactors of a wastewater treatment plant (WWTP). A reduced model of the complex nonlinear plant is represented in a quasi-linear parameter varying (qLPV) form to reduce computational burden, enabling the real-time operation. To facilitate the formulation of the time-varying parameters which are functions of system states, as well as for feedback control purposes, a moving horizon estimator (MHE) that uses the qLPV WWTP model is proposed. The control strategy is investigated and evaluated based on the ASM1 simulation benchmark for performance assessment. The obtained results applying the EMPC strategy for the control of the aeration system in the WWTP of Girona (Spain) show its effectiveness., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020- 114244RB-I00), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014–2020 (ref. 001-P-001643 Looming Factory), and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Implementación de MPC para el seguimiento de trayectorias en un robot móvil omnidireccional

  • Villalba Aguilera, Elena
  • Blesa Izquierdo, Joaquim
  • Ponsa Asensio, Pere
Derechos de autor 2025 Elena Villalba-Aguilera, Joaquim Blesa, Pere Ponsa. Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0), Este trabajo presenta una arquitectura de control para un robot móvil omnidireccional de tres ruedas, validada experimentalmente en la plataforma Robotino 4. La solución evita el uso de ROS (Robot Operating System) al delegar el cálculo del controlador predictivo a una estación externa con MATLAB, la cual se comunica con el robot mediante TCP/IP (Transmission Control Protocol/Internet Protocol). El robot ejecuta un programa en C++ que recibe consignas de velocidad y envía la odometría a la estación de control. Se ha implementado un control LPV-MPC (Linear Parameter Varying Model Predictive Control) que regula simultáneamente la posición (x, y) y la orientación ( ¿),considerando restricciones sobre velocidad, aceleración y posición. El modelo se linealiza en tiempo real, lo que permite el seguimiento de trayectorias bajo condiciones realistas. La solución se ha validado mediante una trayectoria de referencia ovalada que muestra un buen rendimiento y errores acotados. La arquitectura es modular y escalable, y puede extenderse con planificación en entornos dinámicos o integración futura con ROS 2., La autora principal agradece sinceramente el apoyo financiero proporcionado por la Universitat Politècnica de Catalunya y Banco Santander a través de la beca predoctoral FPI-UPC. Este trabajo ha sido financiado parcialmente por la Agencia Española de Investigación (AEI) mediante el proyecto SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Distributed set-based planning in autonomous vehicles

  • Facerías Pelegrí, Marc
  • Puig Cayuela, Vicenç
  • Stancu, Alexandru
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Autonomous vehicles require sophisticated planning algorithms to navigate safely and efficiently in complex environments. Traditional centralised planning approaches face scalability challenges, especially as the number of agents increases. Distributed planning strategies have emerged as a promising solution to overcome these limitations. This paper presents a novel approach to distributed set-based planning for autonomous vehicles. Each vehicle can autonomously plan its path by leveraging set-based representations of possible trajectories while considering uncertainty and dynamic environment changes. The proposed method enables vehicles to collaborate efficiently while maintaining decentralised decision-making capabilities, thus enhancing scalability and robustness. Furthermore, safe trajectories are derived by contemplating system uncertainties through set theory., This work has been partially founded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhancing safety in autonomous vehicles using zonotopic LPV-EKF for fault detection and isolation in state estimation

  • Conejo Barceló, Carlos
  • Puig Cayuela, Vicenç
  • Morcego Seix, Bernardo
  • Milanés, Vicente
  • Navas, Francisco
In this paper, a solution is presented to address the sensor fault detection and isolation (FDI) problem in state estimation for autonomous vehicles (AVs). The primary impetus for autonomous driving lies in its potential to ensure vehicle safety, a goal that requires an accurate determination of location, heading, and speed. Although sensors can directly obtain these measurements, they are often affected by noise and disturbances with unknown but bounded (UBB) distributions. To mitigate these effects, state estimation techniques are commonly employed, leveraging sensor fusion. This work aims to design an FDI methodology that continuously evaluates the accuracy of the state estimation algorithm in an AV. In order to achieve this goal, various observation techniques for robust FDI are compared, including a novel approach of EKF formulated within the LPV framework, named LPV-EKF. A zonotopic LPV-EKF observer is implemented to perform FDI on both state estimation inputs and outputs, considering an UBB noise distribution. The proposed methodology for the identification of anomalies is optimised to minimise the detection time in real world scenarios. The experimental results for FDI, collected from an autonomous Renault Zoe (SAE Level 3), are analysed and discussed., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Design of shifting output-feedback controllers for LPV systems subject to time-varying saturations

  • Ruiz Royo, Adrián
  • Rotondo, Damiano
  • Morcego Seix, Bernardo
This paper considers the problem of designing a shifting output-feedback controller for polytopic linear parameter-varying (LPV) systems subject to time-varying saturations. By means of the LPV framework and the use of the Lyapunov theory, the shifting paradigm concept, and the ellipsoidal invariant theory, a linear matrix inequality (LMI)-based methodology for the controller's design is proposed. The resulting gain-scheduled controller holds the control action in the linearity region of the actuators and regulates online the closed-loop convergence taking into account the instantaneous saturation limit values. The proposed approach is validated by means of an illustrative example., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. PID2020-114244RB-I00). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the University of Stavanger through the project IN-12267. A. Ruiz is also supported by the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya, the European Social Fund (ESF) and AGAUR under a FI SDUR grant (ref. 2020 FI-SDUR 00097)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fault prognosis approach using data-driven structurally generated residuals

  • Fang, Xin
  • Blesa Izquierdo, Joaquim
  • Puig Cayuela, Vicenç
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a fault prognosis approach using data-driven structurally generated residuals. It assumes that a set of residuals generated using structural analysis (SA) and identified using data-driven approach are available. Residuals are used for fault detection purposes activating fault signals when residual values reach anomalous values. In addition, it is possible to predict future faults by means of the detection of anomalous residual deviations. Once an anomalous change in the residual trend has been detected, it is proceed to estimate when this residual deviation will result in a fault detection and therefore which will be the Remaining Useful Life (RUL) time of the system. For this purpose, the future residual evolution is estimated by means of a regressor function. Nominal and interval parameters of regressor function are estimated with available residual data providing nominal and interval values of the RUL of the system. A brushless direct current (BLDC) motor is used as the application case study to illustrate the performance of proposed approach., This work has been co-financed by the Spanish ResearchAgency (AEI) through the projects SaCoAV (ref. MINECOPID2020-114244RB-I00)andL-BEST(PID2020115905RB-C21)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Actuator fault estimation using optimization-based learning techniques for linear parameter varying systems with unreliable scheduling parameters

  • Sanjuan Gómez, Adrián
  • Nejjari Akhi-Elarab, Fatiha
  • Sarrate Estruch, Ramon
A novel fault diagnosis procedure is proposed in this paper to estimate faults using a linear parameter varying (LPV) model whose scheduling parameters depend on the fault. A wrong determination of the operating conditions could lead the system to an undesired performance or even to an unstable situation, when classical fault diagnosis approaches are applied. This paper addresses this issue by formulating fault diagnosis as a dynamic optimization problem, solved by using a novel hybrid technique that combines a Luenberger-based observer with artificial intelligent (AI) optimization-based algorithms. The observer supervises the health of the system, while AI-based algorithms are able to reconstruct the faulty signal in real-time when the observer determines that the system is under a fault. The efficiency of the proposed fault diagnosis scheme, the three AI-based algorithms based on artificial bee colony and particle swarm optimization, and the gradient-based algorithm developed in this paper, are assessed using a numerical example., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-100), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014-2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robust LPV fault tolerant tracking control using set-based approaches for autonomous vehicles

  • Zhang, Shuang
  • Ifqir, Sara
  • Puig Cayuela, Vicenç
© 2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This article proposes a zonotopic filtering-based active fault tolerant tracking control (FTTC) scheme for autonomous vehicles, modeled as linear parameter-varying (LPV) systems subject to disturbances, noise and actuator faults. A zonotopic Kalman filter (ZKF) is proposed to simultaneously estimate both the unmeasurable states and actuator faults. Then, an FTTC is developed, including a reference input, a state-feedback controller, and a fault compensation mechanism. To minimize the impact of uncertainties on the estimates, the optimal filter gain is designed by minimizing the Frobenius norm of the state bounding zonotope. To reduce the tracking error and attenuate the disturbance effects, the controller design ensures the H8 performance of the uncertain tracking error dynamics by constructing a zonotopic Lyapunov function. Finally, the proposed scheme is applied to vehicle lateral dynamics for reference path-tracking control in the presence of actuator faults, and its effectiveness is demonstrated through simulations using real collected data., This work has been co-financed in part by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV under Grant MINECO PID2020-114244RB-I00; in part by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014–2020 under Grant 001-P-001643 Looming Factory; in part by the DGR of Generalitat de Catalunya (SAC group under Grant 2017/SGR/482); and in part by the Chinese Scholarship Council (CSC) under Grant 202006120006. (Corresponding author: Vicenç Puig.), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Zonotopic recursive least-squares parameter estimation: Application to fault detection

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
The uncertain parameters estimation problem for linear discrete-time systems modeled in regression form and assuming an unknown but bounded description of the noise, is the main subject of this work. Particularly, zonotopic sets for bounding the parametric uncertainty are considered. Then, a zonotopic recursive least-squares (ZRLS) estimator is proposed and compared with its stochastic counterpart (RLS), as well as with the set-membership (SM) approach. Likewise, the parameter estimation problem is addressed from the Bayesian general framework to define the relationship between stochastic and deterministic approaches. Moreover, both ZRLS and SM applications applied to fault detection are assessed taking as a reference the minimum detectable fault in the worst case. Finally, a well-known quadruple-tank process is used to illustrate the estimation and fault detection results., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalonia 2014–2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482). The author is also supported by a FI AGAUR grant (ref. 2021FI-B1-00097)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Robust fault detection using zonotopic parameter estimation

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
This paper addresses the system identification problem, as well as its application to robust fault detection, considering parametric uncertainty and using zonotopes. As a result, a Zonotopic Recursive Least Squares (ZRLS) estimator is proposed and compared with the Setmembership (SM) approach when applied to fault detection, taking as a reference the minimum detectable fault generated in the worst-case. To illustrate the effectiveness of the proposed robust parameter estimation and fault detection methodologies, a quadruple tank process is employed., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional De- velopment Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00 ), by the European Regional Development Fund of the European Union in the framework of the ERDF Operational Program of Catalo- nia 2014-2020 (ref. 001-P-001643 Looming Factory) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017/SGR/482). The author is also supported by a FI AGAUR grant (Ref. 2021FI-B1 00097)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Robust unknown Input observer design for uncertain and noisy OSL-QIB nonlinear systems

  • Arango Restrepo, Juan Pablo
  • Etienne, Lucien
  • Duviella, Eric
  • Langueh, Kokou
  • Segovia Castillo, Pablo
  • Puig Cayuela, Vicenç
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper, the problem of designing a robust unknown input observer (RUIO) for quadratically inner bounded (QIB), one-sided Lipschitz (OSL) nonlinear systems in the presence of noise and unknown inputs is addressed. This RUIO is formulated as a convex optimization problem where parameter uncertainty and noise are considered. Sufficient conditions for observer gain synthesis are shown to be equivalent to solving a finite set of Linear Matrix Inequalities (LMIs) and a Linear Matrix Equality (LME). Two illustrative examples, a bioreactor for biomass production from substrate consumption and a robot manipulator, are used to test the effectiveness of the approach in the presence of unknown inputs, parameter uncertainty, and measurement noise., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SaCoAV (ref. PID2020-114244RB-I00) and L-BEST (PID2020- 115905RB-C21)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A model predictive scheduling strategy for coordinated inland vessel navigation and bridge operation

  • Segovia Castillo, Pablo
  • Puig Cayuela, Vicenç
  • Reppa, Vasso
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents the design of a model predictive scheduling strategy to address the inland waterborne transport (IWT) problem considering bridges that must open to enable vessel passage. The main contribution is the formulation of a control-oriented model of the problem, including propositional logic expressions that characterize system behavior and their conversion into (in)equality constraints. The resulting model is embedded into a predictive scheduling approach to determine bridge opening timetables and vessel passage times in a coordinated manner. The effectiveness of the strategy is demonstrated on a realistic case study based on the Rhine-Alpine corridor., This work was supported in part by the Researchlab Autonomous Shipping (RAS) of Delft University of Technology, in part by the project ”Novel inland waterway transport concepts for moving freight effectively (NOVIMOVE)” (this project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 858508), and in part by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Design of shifting state-feedback controllers for LPV systems subject to time-varying saturations via parameter-dependent Lyapunov functions

  • Ruiz Royo, Adrián
  • Rotondo, Damiano
  • Morcego Seix, Bernardo
This paper considers the problem of designing a shifting state-feedback controller via quadratic parameter-dependent Lyapunov functions (QPDLFs) for systems subject to symmetric time-varying saturations. By means of the linear parameter varying (LPV) framework and the use of the shifting paradigm and the ellipsoidal invariant theory, it is shown that the solution to this problem can be expressed with linear matrix inequalities (LMIs) which can efficiently be solved via available solvers. Specifically, three hyper-ellipsoidal regions are defined in the state-space domain for ensuring that the control action remains in the linearity region of the actuators where saturation does not occur. Furthermore, the closed-loop convergence speed is regulated online according to the instantaneous saturation limit values through the shifting paradigm concept. The main characteristics of the proposed approach are validated by means of two illustrative examples., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. PID2020-114244RB-I00). This work has also been partially funded by AGAUR of Generalitat de Catalunya, Spain through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the University of Stavanger, Norway through the project IN-12267. A. Ruiz is also supported by the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya, Spain, the European Social Fund (ESF) and AGAUR under a FI SDUR grant (ref. 2020 FI-SDUR 00097)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LMI conditions for stability and state-feedback H8 control of discrete-time multimode multidimensional systems

  • Medero Borrell, Ariel
  • Puig Cayuela, Vicenç
  • Sename, Olivier
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper deals with stability and state feedback control of discrete-time Multi-Mode Multi-Dimensional (M3D) linear systems. The M3D switch dynamics are modeled through a state mapping describing the mode transitions. This M3D model framework then allows to consider polyquadratic Lyapunov functions to obtain Linear Matrix Inequalities conditions for stability proof and for the synthesis of state-feedback controllers under H8 performance. A numerical example illustrates the improvement of the controller synthesis conditions here introduced for discrete-time M3D systems over independent point-wise mode solutions., This work has been supported by the French National Research Agency (CNRS, “Investissements d’Avenir”, ANR-15-IDEX-02). It has also been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00) and by FPI UPC grant 2020FPIUPC-008., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Interval-based fault diagnosis in wind turbines using structural analysis and gaussian process regression*

  • Pérez Pérez, Esvan de Jesús
  • Valencia Palomo, Guillermo
  • Puig Cayuela, Vicenç
  • Santos Ruiz, Ildeberto
  • Guzmán Rabasa, Julio Alberto
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a hybrid fault diagnosis approach for wind turbines that integrates structural analysis through Analytical Redundancy Relations (ARRs) with datadriven modeling using Gaussian Process Regression (GPR). The proposed method leverages the physical structure of the system to define input-output dependencies and trains GPR estimators on fault-free operational data to predict key subsystem outputs. Residuals are computed by comparing sensor measurements with GPR predictions, and faults are detected using a combination of interval-based thresholds and Cumulative Sum (CUSUM) control charts. The proposed approach is validated on a simulated 5-MW wind turbine benchmark model under realistic operating conditions. Various fault scenarios are injected in the pitch actuator, drivetrain, and generator subsystems. Results demonstrate the fault diagnosis accuracy, robustness, and early detection capability across diverse fault types., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00 )., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robust MPC-RG for an autonomous racing vehicle considering obstacles and the battery state of charge

  • Samada Rigo, Sergio Emil
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
The design of a controller able to deal with uncertainties and physical constraints plays an essential role in fast and complex systems. Then, a reference governor approach based on model predictive control (MPC-RG) for an autonomous racing vehicle is proposed. The MPC-RG guarantees constraint satisfaction and recursive feasibility online while including obstacle avoidance capability and energy-aware management by solving a multi-objective optimization problem. In particular, a trade-off between maximizing the longitudinal velocity and the state of charge of the vehicle’s battery, as well as minimizing the variation of control actions is adopted. Moreover, the proposed MPC-RG is combined with a state-feedback linear quadratic regulator (LQR) and a Kalman filter (KF) to compensate for modeling errors and exogenous disturbances, as well as to estimate the unmeasured lateral velocity. In fact, for control and estimation purposes, a data-driven Takagi–Sugeno (TS) model trained by an adaptive neuro-fuzzy inference network is used. The performance of the developed approach is assessed in simulations using a well-known case study based on a scale RC electric car., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00) and by the DGR of Generalitat de Catalunya (SAC group ref. 2017 / SGR / 482). The work is also supported by a FI AGAUR grant (Ref. 2021FI-B1 00097)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fault detection using data-driven LPV state estimation based on structural analysis and ANFIS

  • Fang, Xin
  • Blesa Izquierdo, Joaquim
  • Puig Cayuela, Vicenç
© 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper presents a data-driven fault detection method combining structural analysis (SA) and machine learning data-driven algorithms. Given a graphic (or textual) system description and the available inputs/outputs measurements, the structure of analytical redundancy relations (ARRs) between some inputs and outputs can be determined with the aid of the SA of the system. Then, using a machine learning data-driven approach applied to historical data, analytical relations between inputs and outputs can be obtained. Thereby, instead of finding ARRs from physical mathematical model, ARRs are obtained combining SA and data-driven approaches. In this paper, the adaptive network fuzzy inference system (ANFIS) data-driven approach is used to implement the diagnosis system. Once the ANFIS model has been identified, it is reformulated in linear parameter varying (LPV) form. Then, a fault detection scheme based on a LPV Kalman filter and pole placement method is developed. A well-known case study based on a four-tanks system is used for illustrative purposes., This work has been co-financed by the Spanish Research Agency (AEI) through the projects SaCoAV (ref. MINECO PID2020-114244RB-I00) and L-BEST (PID2020-115905RB-C2I)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Unknown input observer design for LPV OSL-QIB nonlinear systems

  • Arango Restrepo, Juan Pablo
  • Duviella, Eric
  • Etienne, Lucien
  • Langueh, Kokou
  • Segovia Castillo, Pablo
  • Puig Cayuela, Vicenç
This paper presents the design of an unknown input observer (UIO) for linear parameter-varying (LPV) one-sided Lipschitz quadratically inner-bounded (OSL-QIB) systems. This family of systems extends conventional LPV systems by adding nonlinear terms to improve observer performance and reduce errors due to the transformation of a nonlinear system to its LPV version (either because the nonlinearities are difficult to wrap as it is in the polytopic case, or because the Jacobian does not yield a good approximation). The UIO is initially designed in the absence of noise, allowing to establish LMI conditions to guarantee the convergence of the error dynamics, and then sensor noise is explicitly considered in the design so that its effiect can be mitigated. Finally, a case study based on the Corning channel benchmark is used to test the performance of the UIO in the presence of unknown inputs (e.g., leakage, evaporation or rain)., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SaCoAV (ref. PID2020-114244RB-I00) and L-BEST (PID2020-115905RB-C21)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Distributed lane selection in autonomous platoon coordination

  • Facerías Pelegrí, Marc
  • Puig Cayuela, Vicenç
  • Stancu, Alexandru
This paper proposes a novel non-linear lane selection algorithm for autonomous vehicles based on the Optimality Condition Decomposition algorithm. An initial algorithm based on mixed integer quadratic programming was studied, which proved untreatable due to its computational complexity, leading to similar formulations that do not require such a nature in their variables. As a result, a cascade strategy combining both distributed local planning and decision-making layers is implemented, leading to promising results. The proposed approach can determine paths that consider individual goals and the environment so that agents can collaborate to establish a formation that re-configures online, allowing vehicles to reach their individual goals., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Safe motion planner for autonomous driving based on LPV MPC and reachability analysis

  • Carrizosa Rendón, Álvaro
  • Puig Cayuela, Vicenç
  • Nejjari Akhi-Elarab, Fatiha
This article presents an innovative optimization-based solution to the collision avoidance challenge for autonomous vehicles. The presented approach consists in an online motion planner designed to define feasible and efficient paths able to deal with dynamic surroundings while implicitly ensure safety in the proposed maneuvers. The fact of considering moving obstacles inside the motion planner increases the complexity of the problem while forces it to be executed more frequently as others. To reduce this computational complexity, the approach presented counts with a two stages translation of the commonly used non-linear optimization-based structure into a QP formulation which can be easily solved. The first stage is based on the use of LPV matrices in the dynamic constraints of the vehicle. The second stage consists in performing a reachability analysis based on set propagation to obtain linear expressions of the permitted inputs and reachable states which guarantee safety conditions., This work has been co-financed by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SaCoAV (ref. MINECO PID2020-114244RB-I00) and by the DGR of Generalitat de Catalunya, Spain (SAC group ref. 2017/SGR/482)., Peer Reviewed, Postprint (published version)