Pasar al contenido principal

INTEGRACION DE SISTEMAS DE POST-TRATAMIENTO DE GASES DE ESCAPE MULTIFUNCIONALES EN VEHICULOS DE PROPULSION HIBRIDA

PID2020-114289RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SCR+ASC systems control by backward induction with adaptive grid and different disturbance scenarios

  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Piqueras, P.|||0000-0002-3767-0839
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Nakaema-Aronis, Andre|||0000-0001-9599-7736
[EN] The purpose of this study is to enhance control strategies for selective catalytic reduction (SCR) and ammonia slip catalyst (ASC) systems, aiming to effectively reduce NOx emissions from automotive engines during realistic driving cycles. Despite the effectiveness of these after-treatment systems (ATS), their dynamic and non-linear characteristics present significant challenges in achieving precise control. Therefore, this research proposes a hybrid approach that combines backward induction (BI) as the primary optimization technique with model predictive control (MPC) framework for real-time application. The article introduces a reduced-state control-oriented model of the SCR + ASC system, which is embedded into the BI algorithm to calculate optimal control actions within a finite horizon. Additionally, it is proposed an alternative approach for adapting the grid of model states within the BI algorithm, effectively reducing the computational cost. This adjustment enables the algorithm to operate in real-time with near-optimal results, as confirmed by experimental validation. Lastly, the study explores how different degrees of knowledge regarding system disturbances impact the strategy¿s performance, examining three distinct scenarios: constant prediction horizon, probabilistic description, and full knowledge of the prediction horizon., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This research has been supported by Grant PID2020-114289RB-I00 funded by the Spanish Ministerio de Ciencia eInnovacion, Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of natural and forced charge air humidity on the performance and emissions of a compression-ignition engine operating at high warm altitude

  • Serrano, J.R.|||0000-0003-0692-3917
  • Martín, Jaime|||0000-0002-0496-3176
  • Piqueras, P.|||0000-0002-3767-0839
  • Tabet-Aleixandre, Roberto
  • Gómez-Gil, Javier
[EN] The effect of ambient humidity on the performance and pollutant emissions of internal combustion engines is not considered in the literature despite type-approval criteria are moving closer to real driving conditions. This work analyses experimentally the effects of charge air humidity at high warm altitudes, where the use of exhaust gas recirculation (EGR) is typically lowered and even avoided to recover engine performance at the expense of NOx emissions increase, on the response of a compression-ignition engine under a wide range of steady-state con-ditions in terms of engine-out emissions and specific fuel consumption. The impact of specific humidity varia-tions within the atmospheric range was analysed by coupling the engine to an altitude simulator with pressure, temperature, and humidity control capabilities. High altitudes and warm & high ambient temperatures were explored (2000 m at 30 degrees C and 2500 m at 45 degrees C) to cover ambient specific humidity up to 30 gwater/kgdry_air. In addition, the effects of increasing the specific humidity above the atmospheric levels were considered at 2500 m and 45 degrees C to emulate forced injection of water in the engine intake line corresponding to 60 gwater/kgdry_air. With this approach, understanding of the role of humidity is provided to highlight its importance as additional ambient property in emission control. In parallel, the assessment of the forced water content increase to control NOx emissions when EGR must be lowered was performed due to the altitude impact on the engine performance and turbocharger limits. The results showed a consistent and significant reduction in engine-out NOx emissions as the ambient humidity increased, reaching up to 300% with respect to the dry case, caused by the decrease in O2 availability due to the water content increase. The benefits of high humidity in NOx emission control at high altitudes when EGR is not feasible were complemented by an improved trade-off with particulate matter emission compared to the standard from EGR use. The results evidenced a reduction in opacity close to 250% for a given engine-out NOx emission when EGR was replaced by water content. By contrast, the slowdown of the combustion process as the fresh air humidity increased deteriorated the specific fuel consumption significantly as the engine load and speed increased. Nevertheless, these penalties ranged from 2 to 2.7% in the worst conditions and showed the same sensitivity for EGR and humidity increases., This research has been supported by Grant PID2020-114289RB-I00 funded by the Spanish Ministerio de Ciencia e Innovacion - Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033). The PhD candidate Roberto Tabet has been funded by Universitat Politecnica de Valencia through grant PAID -01-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of exhaust raw emissions and aftertreatment performance in a retrofitted heavy duty-spark ignition engine operating with liquefied petroleum gas

  • Bermúdez, Vicente|||0000-0002-2781-5598
  • Ruiz-Rosales, Santiago|||0000-0001-9536-3696
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Conde-Pabón, Brayan Yessid
[EN] This study investigates the effects of varying Liquefied Petroleum Gas compositions on pollutant emissions and three-way catalyst performance in retrofitted heavy-duty spark-ignition engines. It focuses on fuels with varying propane and butane ratios, providing new insights into the influence of the composition of Liquefied Petroleum Gas on catalyst activity and tailpipe emissions. Representative conditions from the world Harmonized Transient Cycle were selected to comprehensively assess engine emissions and catalyst performance. Experiments under constant and variable lambda conditions tested the catalyst's response concerning raw emissions, exhaust temperature, and space velocity, all variables affected by engine operation. Key findings indicate that catalyst performance is not significantly affected by Liquefied Petroleum Gas composition. Under constant lambda conditions, the catalyst achieved high conversion efficiency of carbon monoxide, unburned hydrocarbons, and nitrogen oxides, especially under rich conditions (lambda = 0.990). However, rich conditions can lead to elevated ammonia levels, although nitrous oxide generation remains low in all circumstances. Implementing lambda pulse strategies reduced ammonia formation to around 25 mg/kWh, ensuring high catalyst conversion efficiency for all pollutant species after optimizing the amplitude and frequency of the pulses to establish the balance of reducing-oxidizing species and oxygen storage for each operation mode. Crucially, Liquefied Petroleum Gas composition was determined to be non-critical for the catalyst in these engines, promoting the use of this fuel in retrofitted engines and promoting for a shift towards cleaner transportation., This research has been supported by Grant PID 2020-114289RB-I00 funded by the Spanish Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion (MCIN/AEI/10.13039/5011000 11033) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physical-based variable geometry turbines predictive control to enhance new hybrid powertrains&apos, transient response

  • Galindo, José|||0000-0001-6068-182X
  • Serrano, J.R.|||0000-0003-0692-3917
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
[EN] Nowadays, internal combustion engine (ICE) concerns regarding fuel consumption motivate engine developers to research new technologies, including turbocharging, downsizing and hybridization. Variable geometry turbines (VGT) have been specifically developed for spark-ignited (SI) ICE in recent years. The transient response of such engines, critical for the new certification cycles and drivability, is mainly governed by the VGT management. This work proposes a physically-based control strategy to govern the VGT position to improve the overall system response. The control system evaluates at each considered time step the VGT position providing the maximum feasible turbocharger acceleration through the energy balance along the turbocharger, considering inertia and physical constraints. Once developed, the strategy is evaluated on a fully-validated one-dimensional engine model under heavy transient load demand operation. The model results are compared with experimental data based on a proportional-integral-derivative controller calibrated for the same transient manoeuvre. The new approach showed equivalent or faster transient dynamics with a substantial reduction in calibration time, reducing the time for implementing new turbocharger technologies for future powertrains. Furthermore, the proposed control's highly physical basis allows for its application to any other fuelled thermodynamic system, including a variable geometry turbine., Acknowledgement This research work is part of the project PID2020-114289RB-I00 funded by MCIN/AEI/10.13039/501100011033. The authors wish to thank Vicente Esteve Ferrer for his invaluable work during the experi-mental campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of Altitude and Ambient Temperature Effects on the Reactivity of Oxidation Catalysts in the Presence of H2

  • Serrano, J.R.|||0000-0003-0692-3917
  • Piqueras, P.|||0000-0002-3767-0839
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Conde-Cortabitarte, Carla|||0009-0007-8337-3935
[EN] Worldwide emission standards are now required to cover engine operation under extreme ambient conditions, which affect the raw emissions and the efficiency of the exhaust aftertreatment systems. These regulations also target new combustion technologies for decarbonization, such as neat hydrogen (H-2) combustion or dual-fuel strategies, which involve a challenge to the analysis of exhaust aftertreatment system requirements and performance. This work addresses the impact of high altitude and low ambient temperature conditions on the reactivity of an oxidation catalyst in the presence of H-2. A reaction mechanism is proposed to cover the main conversion paths of CO, HC, and H-2, including the formation and consumption of high-energy surface reaction intermediates. The mechanism has been implemented into a faster-than-real-time reduced-order model for multi-layer washcoat honeycomb catalytic converters. The model was utilized to investigate the effect of H-2 concentration on the reactivity of CO and HC within the catalyst under various operating and ambient conditions. By applying the model and examining the selectivity towards different reaction pathways in the presence of H-2, insights into surface intermediates and reactivity across different cross-sections of the monolith were obtained. This analysis discusses the underlying causes of reactivity changes promoted by H-2 and its relative importance as a function of driving boundary conditions., This research has been supported by Grant PID2020-114289RB-I00 funded by the Spanish Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033). Additionally, C. Conde thanks PhD funding from Universitat Politécnica de Valéncia through grant FPI-2022-S2-49099, which is supported by project CIPROM/2021/061 funded by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ammonia injection failure diagnostic and correction in engine after-treatment system by NOx and NH3 emissions observation

  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Nakaema-Aronis, Andre|||0000-0001-9599-7736
[EN] To ensure that after-treatment systems (ATS) reduce emissions to the levels for which they were designed, it is essential that the ATS control can rely on the feedback signals from the sensors and actuators that are part of the system. Knowing that the amount of ammonia injected into the catalyst governs the Nitrogen oxides (NOx) reduction, this work addresses the impact of the ammonia injection failure in the Selective Catalytic Reduction (SCR) on the exhaust emissions and describes a model-based fault diagnosis strategy. The proposed approach is based on an artificial neural network (ANN) and a sensor signal analysis (SSA) model of the catalyst, as well as an observer to merge the models and accurately estimate the emissions. The proposed diagnostic strategy is based on the comparison of the observed NOx and ammonia (NH3) emissions of the actual system with those expected in the system without ammonia injection failure. Experimental results show that the proposed strategy can detect failures in ammonia injection above 10%. Once the degradation level is detected, a correction strategy is applied by increasing the ammonia injector opening time according to the estimated degradation to increase the injected ammonia up to levels similar to faultless conditions. When the injection failure was corrected, the proposed strategy was able to mitigate the impact on NOx emissions, reducing them by 23.33% and approaching the NOx levels without injection failure (5.35% increase)., This research has been supported by Grant PID2020-114289RB-I00 funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the impact of turbocharger thermo-mechanical limitations on new generation gasoline engines

  • Serrano, J.R.|||0000-0003-0692-3917
  • Climent, H.|||0000-0002-2407-5651
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
[EN] Among other advances in spark ignited internal combustion engines' field, the variable geometry turbine (VGT) is being analysed to achieve further CO2 reduction objectives. This paper analyses the potential implications of replacing nowadays standard, the waste-gate (WG) technology, with VGT.To do so, after developing a robust and validated model, this work proposes a methodology to optimize the variable valve timing (VVT), at full load working conditions, in a new generation spark ignited (SI) engine, coupled to a VGT prototype. The optimization methodology accounts for the different thermo-mechanical limits of such technology compared to the reference WG turbocharger, particularly in terms of the turbine inlet temperature (T3). Torque differences show a systematic improvement by using a VGT, reaching approximately 22 Nm of improvement and about 17 g/kWh, although the difference in torque is smaller after 3500 rpm due to the more restrictive T3 limit imposed.As well, at partial loads, the same procedure is developed, but targeting the optimization of the engine efficiency. At partial loads, when no exhaust gas recirculation technique is applied, few advantages are identified. However, with exhaust gasses recirculation (EGR) technique, improvements reach 3 g/kWh and permit extending the desired EGR rate towards the lower speeds., Acknowledgements This research has been supported by Grant PID2020-114289RB-I00 funded by MCIN/AEI/10.13039/501100011033. The authors wish to thank Vicente Esteve Ferrer for his invaluable work during the experimental campaign
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Method for turbocharging and supercharging 2-stroke engines, applied to an opposed-piston new concept for hybrid powertrains

  • Serrano, J.R.|||0000-0003-0692-3917
  • López, J. Javier|||0000-0002-9486-2511
  • Climent, H.|||0000-0002-2407-5651
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
[EN] The internal combustion engine's (ICE) electrification calls to question ICE concepts nowadays, leading to new engine architectures conceived to operate as series hybrids. This is the case of the unit analyzed in this work; a 2stroke, spark-ignited, rod-less opposed-piston engine (2S-ROPE). Previous results revealed some efficiency and maximum power drawbacks, which motivated the development of the supercharged or turbocharged engine version. Supercharging the engine results in a straightforward task; however, turbocharging the engine reveals serious stability problems due to the thermo-fluid-dynamic coupling between the intake and exhaust lines. This work presents a method to study and identify the exhaust line geometry since the impact of pressure pulse propagation on the scavenging process is one of the most critical points to be considered from the very first steps. Finally, despite the difficulties of turbocharging the presented 2S engine, the parametric study revealed a suitable geometrical configuration and the engine operative range. Compared to the supercharged engine version, the turbocharged one presents more difficulties but diminishes the mechanical compressor power consumption, implying an advantage in efficiency terms., This research has been supported by Grant PID2020-114289RB-I00 funded by MCIN/AEI/10.13039/501100011033. This research has been partially supported by Grant CIPROM/2021/061 funded by Generalitat Valenciana through project DEVOCO2C.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Characterization of Real Driving Cycles in a Light-Duty Diesel Engine under Different Dynamic Conditions

  • Luján, José M.|||0000-0001-6133-8943
  • Piqueras, P.|||0000-0002-3767-0839
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Redondo-Puelles, Fernando
[EN] This paper studies the behavior of a Euro 6 diesel engine tested under dynamic conditions corresponding to different real driving emissions (RDE) scenarios. RDE cycles have been performed in an engine test bench by simulating its operation in a long van application. A computer tool has been designed to define the cycle accounting for different dynamic characteristics and driver behaviors to study their influence on CO2 and pollutant emissions, particularly CO, THC, and NOX. Different dynamic parameters have been established in terms of power, torque, engine speed, or vehicle speed. Additionally, a tool to estimate the emission of an RDE cycle from steady-state maps has been developed, helping to identify emission trends in a clearer way. Finally, the conclusions suggest that driving patterns characterized by lower engine speeds lead to fewer emissions. In addition, the analysis of RDE cycles from stationary maps helps to estimate the final tailpipe emissions of CO2 and NOX, offering the possibility to rely on tests carried out on engine test bench, dynamometer, or on the road., FundingThis research has been supported by Grant PID2020-114289RB-I00 funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuel economy benefits in internal combustion engines due to soot restructuring in the particulate filter by water injection

  • Serrano, J.R.|||0000-0003-0692-3917
  • Piqueras, P.|||0000-0002-3767-0839
  • Angiolini, Emanuele
  • Garcia-Afonso, Oscar
[EN] Wall-flow particulate filters are key elements to control particulate matter emissions. The stricter emission standards also for non-road mobility machinery makes this device essential to improve the air quality in the short to medium term. However, their high filtration efficiency brings with it an increase in backpressure. This effect becomes more damaging as particles get accumulated in the filter and in hybrid vehicles where exhaust temperature are lower due to more frequent cold starts. Pre-filter water injection is a proven method to reduce the impact of soot load on the pressure drop avoiding the fuel consumption increase. In this paper, the effect of pre-filter water injections is analysed in engine and flow test rig environments. After verifying the impact of consecutive injection events on fuel consumption, the filter was loaded and divided into quarters. These were studied one at a time in flow test rig to separate soot mal-distribution from water drag effects. A wide range of conditions were tested to assess the change in pressure drop generated by a single injection. With this reference, the soot restructuring pattern was analysed employing optical techniques. These provided evidences of the way the soot fragments got released from the particulate layer and moved towards the inlet channels rear end. Additionally, a closer look into the porous wall micro-structure provided insights explaining the lack of effect on filtration efficiency. These results provide a basis for synergistic removal of vehicle condensates for use in fuel consumption reduction., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This research has been supported by Grant PID2020-114289RB-I00 funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuel consumption and aftertreatment thermal management synergy in compression ignition engines at variable altitude and ambient temperature

  • Bermúdez, Vicente|||0000-0002-2781-5598
  • Serrano, J.R.|||0000-0003-0692-3917
  • Piqueras, P.|||0000-0002-3767-0839
  • Diesel, Bárbara
[EN] New regulations applied to the transportation sector are widening the operation range where the pollutant emissions are evaluated. Besides ambient temperature, the driving altitude is also considered to reduce the gap between regulated and real-life emissions. The altitude effect on the engine performance is usually overcome by acting on the turbocharger control. The traditional strategy assumes to keep (or even to increase) the boost pressure, that is, compressor pressure ratio increase, as the altitude is increased to offset the ambient density reduction, followed by the reduction of the exhaust gas recirculation to reach the targeted engine torque. However, this is done at the expense of an increase on fuel consumption and emissions. This work remarks experimentally the importance of a detailed understanding of the effects of the boost pressure and low-pressure exhaust gas recirculation (LP-EGR) settings when the engine runs low partial loads at different altitudes, accounting for extreme warm and cold ambient temperatures. The experimental results allow defining and justifying clear guidelines for an optimal engine calibration. Opposite to traditional strategies, a proper calibration of the boost pressure and LP-EGR enables reductions in specific fuel consumption along with the gas temperature increase at the exhaust aftertreatment system., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This research has been partially supported by the Ministry of Science and Innovation from the Government of Spain through project PID2020-114289RB-I00. Additionally, the Ph.D. student Barbara Diesel has been funded by a grant from the Government of Generalitat Valenciana with reference ACIF/2018/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Study of the Reactive Behavior of SI Engine Aftertreatment Systems Powered by Gaseous Fuels

  • Conde-Pabón, Brayan Yessid
[ES] Históricamente, ha predominado una fuerte dependencia de las fuentes no renovables, especialmente los combustibles fósiles, esenciales para el desarrollo de todos los sectores debido a su versatilidad como fuente de energía para máquinas y procesos industriales. Sin embargo, su uso intensivo y prolongado ha generado graves impactos ambientales y riesgos significativos para la salud pública, impulsados por el crecimiento poblacional, el aumento de la demanda energética y las emisiones contaminantes derivadas de su combustión. Estos problemas han llevado a la implementación de regulaciones que limitan las emisiones contaminantes de los sectores industriales. En particular, se han establecido normativas para regular las emisiones del sector transporte, como CO, CO2, UHC, CH4, NOX, NH3, N2O y PM, ya que numerosas investigaciones científicas han relacionado estas emisiones con problemas de salud y el deterioro ambiental. En respuesta, el sector transporte ha implementado estrategias para cumplir con los límites establecidos, adoptando motores eléctricos, pilas de combustible y sistemas híbridos, sin descartar los motores de combustión interna, los cuales continúan siendo objeto de numerosas investigaciones para optimizar su eficiencia y utilizar combustibles alternativos con bajo o nulo contenido de carbono. En este contexto, los combustibles gaseosos, como el NG y el LPG, han ganado protagonismo en los últimos años, especialmente en aplicaciones de servicio mediano y pesado donde otros sistemas y combustibles no pueden satisfacer la demanda a corto y mediano plazo. Estas alternativas ofrecen ventajas significativas frente a los combustibles tradicionales como la gasolina y el diésel, destacándose por su menor impacto ambiental. No obstante, debido a que las normativas sobre emisiones contaminantes son y seguirán siendo sumamente estrictas, el uso de ATS es y seguirá siendo imprescindible para mitigar las sustancias contaminantes antes de que sean liberadas al medio ambiente. Por esta razón, resulta fundamental llevar a cabo investigaciones que permitan comprender el comportamiento reactivo de los ATS en motores de combustión interna alimentados con combustibles gaseosos para suplir la demanda energética de manera más sostenible. Con base en lo anterior, el objetivo de esta tesis fue estudiar el comportamiento reactivo de los ATS utilizados en motores alimentados por combustibles gaseosos, específicamente LPG. Para ello, se evaluaron dos motores operando con LPG en un banco de pruebas, lo que permitió analizar tanto las emisiones crudas como el desempeño de diversos dispositivos ATS (PCAT, TWC, PF, AOC y CPF) en condiciones de operación estable y transitoria, a partir de los estándares establecidos por la normativa Euro VI. Además, se emplearon dos bancos de gases sintéticos para caracterizar el comportamiento reactivo de un TWC a través de pruebas de light-off, OSC y condiciones transitorias. Estos experimentos facilitaron la calibración y validación de un modelo computacional del TWC, proporcionando una comprensión detallada de los fenómenos fisicoquímicos que ocurren en este catalizador. Entre los hallazgos más relevantes del trabajo destaca la alta efectividad del TWC en condiciones ligeramente ricas para la conversión simultánea de CO, UHC y NOX. Sin embargo, estas condiciones presentan el inconveniente de favorecer la formación de NH3 en el TWC, un fenómeno que puede mitigarse mediante la aplicación de pulsos que alternan la composición del escape entre fases ricas y pobres. La formación de N2O y NH3 estuvo fuertemente influenciada por la temperatura, así como por la presencia de H2O y H2 en el gas de escape, lo que sugiere que durante el arranque en frío del motor ambas especies pueden generar problemas significativos. Esto hace indispensable el uso de dispositivos como el PCAT y el CPF, los cuales mejoran el desempeño ambiental del motor al reducir estas especies contaminantes., [CA] Històricament, ha predominat una forta dependència de les fonts no renovables, especialment els combustibles fòssils, essencials per al desenrotllament de tots els sectors a causa de la seua versatilitat com a font d'energia per a màquines i processos industrials. No obstant això, el seu ús intensiu i prolongat ha generat greus impactes ambientals i riscos significatius per a la salut pública, impulsats pel creixement poblacional, l'augment de la demanda energètica i les emissions contaminants derivades de la seua combustió. Estos problemes han portat a la implementació de regulacions que limiten les emissions contaminants dels sectors industrials. En particular, s'han establit normatives per a regular les emissions del sector transporte, CO, CO2, UHC, CH4, NOX, NH3, N2O i material PM, ja que nombroses investigacions científiques han relacionat estes emissions amb problemes de salut i la deterioració ambiental. En resposta, el sector transporte ha implementat estratègies per a complir amb els límits establits, adoptant motors elèctrics, piles de combustible i sistemes híbrids, sense descartar els motors de combustió interna, els quals continuen sent objecte de nombroses investigacions per a optimitzar la seua eficiència i utilitzar combustibles alternatius amb baix o nul contingut de carboni. En este context, els combustibles gasosos, com el NG i el LPG, han guanyat protagonisme en els últims anys, especialment en aplicacions de servici mitjà i pesat on altres sistemes i combustibles no poden satisfer la demanda a curt i mitjà termini. Estes alternatives oferixen avantatges significatius enfront dels combustibles tradicionals com la gasolina i el dièsel, destacant-se pel seu menor impacte ambiental. No obstant això, pel fet que les normatives sobre emissions contaminants són i continuaran sent summament estrictes, l'ús de ATS és i continuarà sent imprescindible per a mitigar les substàncies contaminants abans que siguen alliberades al medi ambient. Per esta raó, resulta fonamental dur a terme investigacions que permeten comprendre el comportament reactiu dels ATS en motors de combustió interna alimentats amb combustibles gasosos per a suplir la demanda energètica de manera més sostenible. Amb base en l'anterior, l'objectiu d'esta tesi va ser estudiar el comportament reactiu dels ATS utilitzats en motors alimentats per combustibles gasosos, específicament LPG. Per a això, es van avaluar dos motors operant amb LPG en un banc de proves, la qual cosa va permetre analitzar tant les emissions crues com l'acompliment de diversos dispositius ATS (PCAT, TWC, PF, AOC i CPF) en condicions d'operació estable i transitòria, a partir dels estàndards establits per la normativa Euro VI. A més, es van emprar dos bancs de gasos sintètics per a caracteritzar el comportament reactiu d'un TWC a través de proves de light-off, OSC i condicions transitòries. Estos experiments van facilitar el calibratge i validació d'un model computacional del TWC, proporcionant una comprensió detallada dels fenòmens fisicoquímics que ocorren en este catalitzador. Entre les troballes més rellevants del treball destaca l'alta efectivitat del TWC en condicions lleugerament riques per a la conversió simultània de CO, UHC i NOX. No obstant això, estes condicions presenten l'inconvenient d'afavorir la formació de NH3 en el TWC, un fenomen que pot mitigar-se mitjançant l'aplicació de polsos que alternen la composició de la fuita entre fases riques i pobres. La formació de N2O i NH3 va estar fortament influenciada per la temperatura, així com per la presència d'H¿O i H2 en el gas de fuita, la qual cosa suggerix que durant l'arrancada en fred del motor totes dues espècies poden generar problemes significatius. Això fa indispensable l'ús de dispositius com el PCAT i el CPF, els quals milloren l'acompliment ambiental del motor en reduir estes espècies contaminants., [EN] Historically, there has been a strong dependence on non-renewable sources, particularly fossil fuels, which are essential for developing all sectors due to their versatility as energy sources for machinery and industrial processes. However, their intensive and prolonged use has led to severe environmental impacts and significant public health risks, driven by population growth, increased energy demand, and pollutant emissions resulting from their combustion. These problems have prompted the implementation of regulations to limit pollutant emissions from industrial sectors. In particular, standards have been established to regulate emissions from the transportation sector, including CO, CO2, UHC, CH4, NOX, NH3, N2O, and PM, as numerous scientific studies have linked these emissions to health issues and environmental degradation. In response, the transportation sector has implemented strategies to comply with the established limits by adopting electric engines, fuel cells, and hybrid systems while continuing to focus on internal combustion engines, which remain the subject of extensive research aimed at optimizing their efficiency and using alternative fuels with low or zero carbon content. In this context, gaseous fuels, such as NG and LPG, have gained prominence in recent years, especially in medium- and heavy-duty applications where other systems and fuels cannot meet the demand in the short to medium term. These alternatives offer significant advantages over traditional fuels such as gasoline and diesel, particularly for their lower environmental impact. However, because emission standards are and will continue to be extremely stringent, using ATS remains essential to mitigate pollutants before they are released into the environment. For this reason, it is crucial to conduct studies that help understand the reactive behavior of ATS in internal combustion engines fueled by gaseous fuels to meet energy demand more sustainably. Based on the above, this thesis aimed to study the reactive behavior of ATS used in engines fueled by gaseous fuels, specifically LPG. To this end, two LPG-powered engines were evaluated on an engine test bench, which enabled the analysis of both raw emissions and the performance of various ATS devices (PCAT, TWC, PF, AOC, and CPF) under steady-state and transient operating conditions, following the standards established by the current Euro VI regulations. Additionally, two synthetic gas benches were used to characterize the reactive behavior of a TWC through tests of light-off, OSC, and transient conditions. These experiments facilitated the calibration and validation of a computational model of the TWC, providing a detailed understanding of the physicochemical phenomena occurring in this catalyst. Among the most relevant findings of this work is the high effectiveness of the TWC under slightly rich conditions for the simultaneous conversion of CO, UHC, and NOx. However, these conditions have the drawback of promoting NH3 formation in the TWC, which can be mitigated by applying pulses that alternate the exhaust composition between rich and lean phases. The formation of N2O and NH3 was strongly influenced by temperature and the presence of H2O and H2 in the exhaust gas, suggesting that both species could have significant problems during cold engine starts. This makes it essential to use devices such as PCAT and CPF, which improve the environmental performance of the engine by reducing these pollutants., This work was funded by the Vicerrectorado de Investigación of Universitat Politècnica de València through the FPI UPV SUBP2 grant (PAID-01-20) and by the PID2020-114289RB-I00, PRE2021-099841 grant from the FSE+, the Spanish Ministry of Science and Innovation, and the National Agency for Research (MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the applicability of cold acoustic measurements to high-amplitude hot pulsating flows

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • Piqueras, P.|||0000-0002-3767-0839
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Redondo-Navarro, Álvaro Rafael|||0000-0003-1668-1245
[EN] The experimental characterization of the acoustic characteristics of engine exhaust devices is usually carried out through measurements in cold conditions, due to the intrinsic difficulties associated with proper temperature control in an acoustic rig. While those measurements may be sufficiently indicative for the cold end of the exhaust (the silencing elements) their significance for the hot end (the aftertreatment system) is more doubtful, as a result of the high temperatures and, eventually, the higher amplitude of pressure waves acting on the system. In this paper, a direct assessment is provided on the significance of acoustic measurements in cold conditions for representing the actual behaviour of an aftertreatment system in a hot pulsating, engine-like flow. Making use of wave decomposition techniques, the measured characterization was convoluted with the hot-flow excitation and the device responses were directly compared. The results indicate that, while it is not possible to fully reproduce the behaviour observed in hot pulsating flow, the tendencies are reproduced, at least qualitatively. In particular, the effect of soot loading is fairly reproduced., This research has been supported by Grant PID2020114289RB-I00 funded by MCIN/AEI/https://doi.org/10.13039/501100011033.Alvaro Redondo is supported by Universitat Politecnica de Valencia through the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-19) which grants his predoctoral contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Cylinder-to-Cylinder Dispersion of Exhaust Gas Recirculation on the Three-Way Catalyst Performance and Tailpipe Emissions of Spark-Ignition Engines

  • Piqueras, P.|||0000-0002-3767-0839
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Conde-Cortabitarte, Carla|||0009-0007-8337-3935
[EN] New generations of spark-ignition engines include exhaust gas recirculation (EGR) to improve the engine efficiency. Depending on the design of the EGR routing, some differences in the total amount of recirculated gases that reach each cylinder can be induced. This affects the air-to-fuel ratio on each cylinder due to the combination of the different temperature and composition of the gases at the intake valve closure. As a consequence, significant deviations in the combustion process and the subsequent composition upstream the three-way catalyst can be reached. This paper explores these effects on catalyst performance and tailpipe emissions, individualizing the behavior for each regulated species. The study was performed in a four-cylinder naturally aspirated engine with Atkinson cycle and a close-coupled three-way catalyst. The most significant deterioration in conversion efficiency appeared for the nitrogen oxides, directly linked to the EGR dispersion level. In the case of carbon monoxide (CO) emissions, no significant impact was observed except at high average EGR rates, where one or more of the cylinders exceeded the EGR tolerance for that speed and load. Based on these results, a strategy where the fuel injector command is adapted to correct the air-to-fuel ratio deviations induced by the EGR was developed and implemented., MCIN supported by Grant No. PID2020-114289RB-I00 funded by MCIN/AEI/10.13039/501100011033; Funder ID:10.13039/501100004837.Universitat Politecnica de-Valencia through Grant No. FPI-2022-S2-49099; Funder ID: 10.13039/501100004233.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A methodology to study the interaction between variable valve actuation and exhaust gas recirculation systems for spark-ignition engines from combustion perspective

  • Galindo, José|||0000-0001-6068-182X
  • Climent, H.|||0000-0002-2407-5651
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Pitarch-Berná, Rafael
  • Guilain, Stephane
  • Besançon, Thomas
[EN] Several technologies are being put in place to improve the efficiency of spark-ignition engines. Two of these technologies are variable valve actuation and exhaust gas recirculation, both of which can have an impact on combustion according to the literature. However, this impact is due to variations in both the in-cylinder tem-perature and composition, linked to the different characteristics of internal and external residuals, which are difficult to decouple. In this paper, a methodology aimed at improving the understanding of the temperature and composition effects on combustion parameters is developed. Internal residuals are controlled through a variable valve timing actuation, and evaluated thanks to a previously validated one-dimensional engine model, while the externally-circulated exhaust are extracted after the catalyst through a low-pressure system. Combustion is analyzed based on in-cylinder pressure acquisition and emissions measurement at the engine-out, before the aftertreatment module. Different combinations of internal and external residuals are tested with different stra-tegies from the point of view of the spark actuation: first, a constant spark timing for each value of total residuals; then, a spark timing adapted to maintain the same temperature inside the cylinder at the combustion start, and finally an optimized calibration from the point of view of the engine efficiency. Results show a general trend to enhance combustion timings as higher share of internal residuals are introduced for the same amount of total residuals. It can be seen how this trend comes mostly from the temperature effect at low total residuals fraction, while composition effects are more significant as the amount of total residuals increase. Empirical correlations developed in the paper confirm the need to decouple internal and external residuals to have a proper estimation of the combustion timings. Despite the positive impact of internal residuals on the combustion duration, a small fuel consumption benefit is reached with cooled exhaust gas recirculation thanks to lower heat transfer losses. In terms of emissions, unburned hydrocarbon emissions tend to be reduced with increasing the share of internal residuals thanks to the higher combustion speed, while other gaseous emissions are mostly affected by the total residuals amount. Therefore, internal and external residuals could be combined to achieve the best trade-off between fuel consumption and hydrocarbon emissions., This research is part of the project PID2020-114289RB-I00 funded by MCIN/ AEI /10.13039/501100011033. The authors would like to thank Mr. Vicente Esteve Ferrer for his collaboration during the experimental campaing and testing activities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuel efficiency optimisation based on boosting control of the particulate filter active regeneration at high driving altitude

  • Piqueras, P.|||0000-0002-3767-0839
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Burke, Richard
  • Diesel, Bárbara
[EN] The air pressure change as a function of the driving altitude affects negatively the engine performance and emissions as well as the efficiency of the exhaust aftertreatment systems (ATS). These detrimental effects have driven the emissions standards to account for the altitude as boundary condition in type-approval tests. The new requirements demand to balance the recovery of the engine performance as the altitude increases by means of control strategies avoiding negative effects on tailpipe emissions, i.e. combination of engine-out emissions and ATS performance. In this context, this study identifies experimentally the need of optimisation of the active regeneration strategies applied to wall-flow particulate filters for altitude driving. Firstly, a particulate filter was subjected to active regenerations at altitudes ranging from sea-level to 2500 m for a variety of initial soot loads. As boundaries, the engine worked according to the series calibration, which was found to be a function of the altitude for the boosting system actuation. The results evidenced a noticeable deterioration of the soot oxidation rate as the altitude increased. In fact, some operating conditions showed an early balance between filtration and oxidation that avoided the completeness of the regeneration process. The root causes of the soot depletion rate reduction, which involved thermal and transport phenomena, are reasoned from the combined analysis of experimental and modelling approaches. The conclusions provided a guide to successfully conduct the turbine actuation for an optimum exhaust thermal management during the regeneration event at altitude., This research has been supported by Grant PID2020-114289RBI00 funded by MCIN/AEI/10.13039/501100011033. Additionally, the PhD candidate Barbara Diesel has been funded by a grant from the Government of Generalitat Valenciana and FSE (European Union) with reference ACIF/2018/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of Particle Number Emissions in a Retrofitted Heavy-Duty Spark Ignition Engine Powered by LPG

  • Bermúdez, Vicente|||0000-0002-2781-5598
  • Piqueras, P.|||0000-0002-3767-0839
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Conde-Pabón, Brayan Yessid
[EN] This study aims to examine the particle number (PN) emissions of a retrofitted heavy-duty spark ignition (HD-SI) engine powered by liquefied petroleum gas (LPG) under both steady-state and transient conditions. The engine was tested under seven steady-state operating points to investigate the PN behavior and particle size distribution (PSD) upstream and downstream of the three-way catalyst (TWC). This analysis intends to assess the impact of including particles with diameters ranging from 10 nm to 23 nm on the total particle count, a consideration for future regulations. The study employed the World Harmonized Transient Cycle (WHTC) for transient conditions to encompass the same engine working region as is used in the steady-state analysis. A Dekati FPS-4000 diluted the exhaust sample to measure the PSD and PN for particle diameters between 5.6 nm and 560 nm using the TSI-Engine Exhaust Particle Sizer (EEPS) 3090. The findings indicate that PN levels tend to increase downstream of the TWC under steady-state conditions in operating points with low exhaust gas temperatures and flows (equal to or less than 500 degrees C and 120 kg/h). Furthermore, the inclusion of particles with diameters between 10 nm and 23 nm leads to an increase in PN emissions by 17.70% to 40.84% under steady conditions and by an average of 40.06% under transient conditions, compared to measurements that only consider particles larger than 23 nm. Notably, in transient conditions, most PN emissions occur during the final 600 s of the cycle, linked to the most intense phase of the WHTC., This research was supported by Grant PID2020-114289RB-I00 funded by the Spanish Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Model-based simultaneous diagnosis of ammonia injection failure and catalyst ageing in deNOx engine after-treatment systems

  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Piqueras, P.|||0000-0002-3767-0839
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Nakaema-Aronis, Andre|||0000-0001-9599-7736
[EN] After-treatment systems (ATS) in vehicle powertrains are developed to achieve maximum pollutant abatement efficiency under design operating conditions. However, anomalies in the ATS may appear during real operation, such as reducing agent supply failure and catalyst ageing. As in the case of an ATS composed of a selective catalytic reduction (SCR) system plus an ammonia slip catalyst (ASC), injection failure leads to insufficient ammonia levels to reduce nitrogen oxide (NOx), and ageing decreases the ammonia storage capacity and NOx conversion efficiency, these drawbacks drive both pollutants to levels above those expected and allowed by governmental regulations. To address this problem, a novel methodology was proposed that simultaneously estimates the operational state of the ATS in terms of ammonia injection failure and ASC catalyst ageing. The approach through control-oriented models based on an artificial neural network (ANN) and sensor signal analysis (SSA), as well as an extended Kalman filter (EKF) observer, compares the current emission levels estimated by the observer in a two-dimensional probabilistic plan and a variable time-window, with those expected if the ATS were operating under normal conditions. The proposed methodology was evaluated in real driving cycles with the ATS subjected to several undesired operating conditions. As a result, the model was able to accurately estimate the levels of ammonia injection failure and catalyst ageing state. Therefore, enabling the control system to modify the ammonia injection strategy to achieve desired levels of NOx and NH3 emissions., This research has been supported by Grant PID2020-114289RB-I00 funded by the Spanish Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion, Spain (MCIN/AEI/10.13039/501100011033).