Pasar al contenido principal

IMPACTOS DE LARGO ALCANCE DE LAS CASCADAS DE AGUA DENSA EN EL OCEANO ATLANTICO NORTE Y EL MAR MEDITERRANEO (FAR-DWO)

PID2020-114322RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compression of Multibeam Echosounders Bathymetry and Water Column Data

  • Martí, Aniol
  • Portell, Jordi
  • Amblas, David
  • Cabrera, Ferran de
  • Vila, Marc
  • Riba, Jaume
  • Mitchell, Garrett
Over the past decade, Multibeam Echosounders (MBES) have become one of the most used techniques in sea exploration. Modern MBES are capable of acquiring both bathymetric information on the seafloor and the reflectivity of the seafloor and water column. Water column imaging MBES surveys acquire significant amounts of data with rates that can exceed several GB/h depending on the ping rate. These large file sizes obtained from recording the full water column backscatter make remote transmission difficult if not prohibitive with current technology and bandwidth limitations. In this paper, we propose an algorithm to decorrelate water column and bathymetry data, focusing on the KMALL format released by Kongsberg Maritime in 2019. The pre-processing stage is integrated into FAPEC, a data compressor originally designed for space missions. Here, we test the algorithm with three different datasets: two of them provided by Kongsberg Maritime and one dataset from the Gulf of Mexico provided by Fugro USA Marine. We show that FAPEC achieves good compression ratios at high speeds using the pre-processing stage proposed in this paper. We also show the advantages of FAPEC over other lossless compressors as well as the quality of the reconstructed water column image after lossy compression at different levels. Lastly, we test the performance of the pre-processing stage, without the constraint of an entropy encoder, by means of the histograms of the original samples and the prediction errors., This work was (partially) funded by the ERDF (a way of making Europe) by the European Union through grant RTI2018-095076-B-C21, the Institute of Cosmos Sciences University of Barcelona (ICCUB, Unidad de Excelencia María de Maeztu) through grant CEX2019-000918-M, the Spanish State Research Agency (PID2020-114322RBI00), the European Union’s Horizon 2020 research and innovation programme (Marie Sklodowska-Curie grant 658358), the Catalan Government Excellence Research Groups Grant to GRC Geociències Marines (ref. 2017 SGR 315), the Spanish Ministry of Science and Innovation project RODIN (PID2019-105717RB-C22/AEI/10.13039/501100011033), and Fellowship FI 2019 by the Secretary for University and Research of the Generalitat de Catalunya and the European Social Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sediment dynamics in the Gulf of Lion (NW Mediterranean Sea) during two autumn-winter periods with contrasting meteorological conditions

  • Estournel, Claude
  • Mikolajczak, Guillaume
  • Ulses, Caroline
  • Bourrin, François
  • Canals, Miquel
  • Charmasson, Sabine
  • Doxaran, David
  • Duhaut, Thomas
  • Durrieu de Madron, Xavier
  • Marsaleix, Patrick
  • Palanques, Albert
  • Puig, Pere
  • Radakovitch, Olivier
  • Sánchez-Vidal, Anna
  • Verney, Romaric
20 pages, 15 figures, 3 tables.-- Data availability: Data will be made available on request, A simulation based on a hydro-sedimentary model was conducted for the period between summer 2010 and spring 2012 in the Gulf of Lion (northwestern Mediterranean Sea) to understand the spatial and temporal variability of sediment transport, erosion and deposition on the continental shelf and slope. Datasets of both simulated and observed current, temperature and suspended matter from the shelf and the Cap de Creus Canyon which is the main export route towards the continental slope, were first compared to assess the reliability of the simulation. The simulation shows the massive sediment accumulation near the Rhone River mouth (∼56 % of the inputs), the accretion along the mid-shelf mud belt, and the impact of dense shelf water cascading on sediment resuspension and erosion inside the Cap de Creus Canyon. The two studied autumn–winter periods were strongly contrasted in terms of meteorological conditions and subsequent impacts on the sediment dynamics. During the first period (2010–2011) dominated by marine storms, the shelf sediment underwent strong changes, the Rhone River sediment load accumulated in a relatively small area, stock of littoral sands moved to the inner shelf (20–40 m) while inner shelf fine particles fed the mid-shelf mud belt and the upper Cap de Creus Canyon. During the second period (2011–2012) with very little marine wind and a particularly cold winter, sediment on the shelf underwent little change except for a southwestward growth of the Rhone River prodeltaic deposit. Sediment from the southwestern end of the shelf as well as from the upper Cap de Creus Canyon was flushed toward deeper reaches by dense shelf water cascading. Cascading also had a more moderate impact in the various canyons incising the continental shelf. Our work supports the view of an unbalanced sedimentary system, with a deficit mainly over the inner shelf, whose main driver is probably the strong and fast reduction of particulate matter inputs from the Rhone River (by a factor of 4 in less than one century), This study (including the PhD and Postdoc of G. Mikolajczak) was mainly funded by the AMORAD-project (grant ANR-11-RSNR-0002 of the French program Investissement d’Avenir run by the Agence Nationale de la Recherche). We also benefited from the support of the CHIFRE and DeltaRhone projects of the national EC2CO program. The simulations were performed using HPC resources from CALMIP (Grant P09115) and CINES OCCIGEN (Grant A0040110088). This research was also supported by grant PID2020-114322RB-I00 (FAR-DWO) funded by MCIN/AEI/ 10.13039/501100011033, With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Capturing dense shelf water cascading with a high-resolution ocean reanalysis

  • Fos, Helena
  • Peña-Izquierdo, Jesús
  • Amblas, David
  • Arjona-Camas, Marta
  • Romero, Laia
  • Estella-Perez, Víctor
  • Florindo-López, Cristián
  • Calafat, Antoni
  • Cerdà-Domènech, Marc
  • Puig, Pere
  • Durrieu de Madron, Xavier
  • Sánchez-Vidal, Anna
10 pages, 5 figures, 1 table.-- Data availability: MedSea reanalysis data are available on the CMEMS website (https://data.marine.copernicus.eu/product/MEDSEA_MULTIYEAR_PHY_006_004/services, last access: 28 January 2025, https://doi.org/10.25423/CMCC/MEDSEA_MULTIYEAR_PHY_006_004_E3R1; Escudier et al., 2020). The LD1000 dataset (https://doi.org/10.17882/45980, Durrieu de Madron et al., 2024) is available at https://campagnes.flotteoceanographique.fr/series/62/ (last access: 3 February 2025) and https://www.seanoe.org/data/00349/45980/ (last access: 3 February 2025). The CC1000 (https://doi.org/10.17882/104746, Sanchez-Vidal et al., 2025) and CC750 (https://doi.org/10.17882/104799, Puig and Palanques, 2025) datasets are available at https://www.seanoe.org/data/00936/104746/ (last access: 3 February 2025) and https://www.seanoe.org/data/00936/104799/ (last access: 10 February 2025), respectively, Video supplement Movie S1 shows the bottom θ from the Mediterranean Sea Physics Reanalysis in winter 2005. White markers represent the locations of the moorings. Movie S2 shows the same as Movie S1 but for winter 2012. Movie S3 shows the daily sequence of the hydrographic properties in the vertical sections of Cap de Creus and Lacaze-Duthiers canyons, as in Fig. 4, but for all of the winters with IDSWC. These movies are all available at https://av.tib.eu/series/1951 (last access: 29 September 2025; DOIs: https://doi.org/10.5446/70980, Fos et al., 2025a; https://doi.org/10.5446/70979, Fos et al., 2025b; https://doi.org/10.5446/70978, Fos et al., 2025c, Dense shelf water cascading (DSWC) is an oceanographic process that occurs when dense shelf water overflows over the shelf edge downslope toward the deep sea. Monitored in the northwestern Mediterranean by moorings since 1993 in the Lacaze-Duthiers Canyon and since 2005 in the Cap de Creus Canyon, numerical modeling with reanalysis extends this timeline further into the past. This study investigates a regional reanalysis (1987–2021) validated against mooring observations at 750–1000 m depth. The reanalysis successfully reproduces observed intense DSWC (IDSWC) events from 1999, 2000, 2005, 2006, 2012, 2013, and 2018 while identifying one previously unreported event in 1987 and detecting no IDSWC between 1988 and 1998. The reanalysis effectively matches 84 % of observed IDSWC days within the same week and 56 % on the exact date. Instead of assimilating IDSWC events from mooring observations to resolve the cascading process, the model relies solely on the seawater density on the shelf and revealed the seawater properties along the canyon that caused IDSWC. This work highlights the importance of high-resolution reanalyses in investigating the impacts of mesoscale processes on larger scales in the deep ocean, This research has been supported by the Ministerio de Ciencia e Innovación of the Spanish government through the FAR-DWO project number PID2020-114322RBI00 and the ICM Severo Ochoa Centre of Excellence accreditation (grant no. CEX2024-001506-M), funded by MCIN/AEI/10.13039/501100011033. The study is also supported by the Generalitat de Catalunya through the Excellence Research Groups Grants (nos. 2021-SGR-01195 and 2021-SGR-00433) and through the FI-SDUR fellowship (grant no. 2023-FISDU-00233) provided by the Secretaria d’Universitats i Recerca from the Departament de Recerca i Universitats, This work contributes to the Institut de Ciències del Mar "Severo Ochoa Centre of Excellence" accreditation CEX2024-001494-S funded by AEI 10.13039/501100011033 of the Spanish Ministry of Science and Innovation, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Compression of multibeam echosounders bathymetry and water column data

  • Martí, Aniol
  • Portell de Mora, Jordi
  • Amblàs Novellas, David
  • Cabrera Estanyol, Ferran de|||0000-0001-6949-780X
  • Vila Insa, Marc|||0000-0002-7032-1411
  • Riba Sagarra, Jaume|||0000-0002-5515-8169
  • Mitchell, Garrett
Over the past decade, Multibeam Echosounders (MBES) have become one of the most used techniques in sea exploration. Modern MBES are capable of acquiring both bathymetric information on the seafloor and the reflectivity of the seafloor and water column. Water column imaging MBES surveys acquire significant amounts of data with rates that can exceed several GB/h depending on the ping rate. These large file sizes obtained from recording the full water column backscatter make remote transmission difficult if not prohibitive with current technology and bandwidth limitations. In this paper, we propose an algorithm to decorrelate water column and bathymetry data, focusing on the KMALL format released by Kongsberg Maritime in 2019. The pre-processing stage is integrated into FAPEC, a data compressor originally designed for space missions. Here, we test the algorithm with three different datasets: two of them provided by Kongsberg Maritime and one dataset from the Gulf of Mexico provided by Fugro USA Marine. We show that FAPEC achieves good compression ratios at high speeds using the pre-processing stage proposed in this paper. We also show the advantages of FAPEC over other lossless compressors as well as the quality of the reconstructed water column image after lossy compression at different levels. Lastly, we test the performance of the pre-processing stage, without the constraint of an entropy encoder, by means of the histograms of the original samples and the prediction errors., This work was (partially) funded by the ERDF (a way of making Europe) by the European Union through grant RTI2018-095076-B-C21, the Institute of Cosmos Sciences University of Barcelona (ICCUB, Unidad de Excelencia María de Maeztu) through grant CEX2019-000918-M, the Spanish State Research Agency (PID2020-114322RBI00), the European Union’s Horizon 2020 research and innovation programme (Marie Sklodowska-Curie grant 658358), the Catalan Government Excellence Research Groups Grant to GRC Geociències Marines (ref. 2017 SGR 315), the Spanish Ministry of Science and Innovation project RODIN (PID2019-105717RB-C22/AEI/10.13039/501100011033), and Fellowship FI 2019 by the Secretary for University and Research of the Generalitat de Catalunya and the European Social Fund., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Compression of multibeam echosounders bathymetry and water column data

  • Martí, Aniol
  • Portell de Mora, Jordi
  • Amblàs Novellas, David
  • Cabrera Estanyol, Ferran de
  • Vila Insa, Marc
  • Riba Sagarra, Jaume
  • Mitchell, Garrett
Over the past decade, Multibeam Echosounders (MBES) have become one of the most used techniques in sea exploration. Modern MBES are capable of acquiring both bathymetric information on the seafloor and the reflectivity of the seafloor and water column. Water column imaging MBES surveys acquire significant amounts of data with rates that can exceed several GB/h depending on the ping rate. These large file sizes obtained from recording the full water column backscatter make remote transmission difficult if not prohibitive with current technology and bandwidth limitations. In this paper, we propose an algorithm to decorrelate water column and bathymetry data, focusing on the KMALL format released by Kongsberg Maritime in 2019. The pre-processing stage is integrated into FAPEC, a data compressor originally designed for space missions. Here, we test the algorithm with three different datasets: two of them provided by Kongsberg Maritime and one dataset from the Gulf of Mexico provided by Fugro USA Marine. We show that FAPEC achieves good compression ratios at high speeds using the pre-processing stage proposed in this paper. We also show the advantages of FAPEC over other lossless compressors as well as the quality of the reconstructed water column image after lossy compression at different levels. Lastly, we test the performance of the pre-processing stage, without the constraint of an entropy encoder, by means of the histograms of the original samples and the prediction errors., This work was (partially) funded by the ERDF (a way of making Europe) by the European Union through grant RTI2018-095076-B-C21, the Institute of Cosmos Sciences University of Barcelona (ICCUB, Unidad de Excelencia María de Maeztu) through grant CEX2019-000918-M, the Spanish State Research Agency (PID2020-114322RBI00), the European Union’s Horizon 2020 research and innovation programme (Marie Sklodowska-Curie grant 658358), the Catalan Government Excellence Research Groups Grant to GRC Geociències Marines (ref. 2017 SGR 315), the Spanish Ministry of Science and Innovation project RODIN (PID2019-105717RB-C22/AEI/10.13039/501100011033), and Fellowship FI 2019 by the Secretary for University and Research of the Generalitat de Catalunya and the European Social Fund., Peer Reviewed, Postprint (published version)