Pasar al contenido principal

PALIGORSKITA: CIENCIA FUNDAMENTAL PARA APLICACIONES TECNOLOGICAS

PID2020-114355GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Acid-base surface titration of palygorskite aqueous suspensions

  • Huertas, F. J.
  • Van Driessche, Alexander E. S.
  • Bentabol, María José
  • Almarza-Cifuentes, Pablo
International Conference of European Clay Groups Association - EUROCLAY 2023, BARI, Italy, July 24-27, 2023, Interactions of palygorskite with aqueous solutions are largely determined by the surface structure and crystal chemistry of the particles. The electrostatic interactions among charged dangling atoms at the crystal edges (surface sites) and aqueous ions and molecules develop a distorted layer of solvent surrounding the particles, called the palygorskite/solution interface, which can be envisioned as an electric double layer. This is the scenario where reactions of hydrolysis, adsorption and precipitation occur. It is also origin of interparticle electrostatic interactions that produce colloidal behavior and rheological applications. There is limited information on the surface chemistry of palygorskite. The crystallographic analysis of the structure shows three main surfaces where several cations are exposed. The surface groups may exhibit different reactivity due to pH conditions, developing a surface charge of a permanent nature (isomorphic substitutions) or pH-dependent (amphoteric or basic sites). Potentiometric surface titrations of aqueous palygorskite suspensions provide titration curves that contain information on the bulk sample: the surface charge under several pH conditions, the effect of ionic strength and the point of zero charge (PZC). Furthermore, models of the electric double layer can be applied to the interface to derive information on the reactivity of the surface groups: the type of reactive surface sites, the surface speciation (amphoteric, basic) and surface ionization constants (pKai) and potentials. Potentiometric titrations of palygorskite suspensions were performed over a wide range of pH (3-11) to measure proton adsorption/desorption as a function of pH, ionic strength (0.1, 0.01, 0.001 M KCl) at room temperature (~25°C). One gram of palygorskite was suspended in 50 mL of an inert electrolyte solution of KCl, and 4 mL of KOH 0.1 M solution was added to attain an initial pH of ~11. Titrations were conducted with an automatic titrator, and 0.1 M HCl was used as the titrant solution. Solutions were bubbled with N2 gas to purge CO2. The pH electrode was calibrated at the temperature of interest with buffer solutions of pH 7, 4 and 9.2. Suspensions were continuously stirred, and N2 gas was pumped directly into the suspensions during titrations to purge the solutions of CO2. Titrant solutions were added after pH stabilization, presumed to exist when the pH changed approximately less than 0.01 unit per minute. Titration curves showed inflection points associated with surface protonation/deprotonation of Si and octahedral cations. The surface charge at different pH values was obtained by proton balance, after correction of dissolution and background effects. Research supported by Grant PID2020-114355GB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ¿ERDF A way of making Europe¿., Research supported by Grant PID2020-114355GB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset associated with Project PID2020-114355GB-I00 PALYTECH, concerning Objective 2.1. Potentiometric titrations of palygorskite suspensions

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Protolysis of pyrophyllite {010} edge. Dataset associated with Project PID2020-114355GB-I00 PALYTECH, CONCERNING Task 1.3. Computational modeling of surface alteration of palygorskite [Dataset]

  • Bentabol, María
  • Pérez del Valle, Carlos
  • Hernández-Laguna, Alfonso
  • Huertas, F. Javier
Research supported by Grant PID2020-114355GB-100 funded by MCIN/AEI/ 10.13039/501100011033 and by ÒERDF a way of making Europeo. The authors thank Centro de Supercomputación y Bioinformática (SCBI/PAB), Universidad de Málaga, for the computation time. CPV thanks the GRICAD infrastructure (https://gricad.univ-grenoble-alpes.fr), which is supported by Grenoble research communities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Protolysis of pyrophyllite {100} edge. Dataset associated with Project PID2020-114355GB-I00 PALYTECH, CONCERNING Task 1.3. Computational modeling of surface alteration of palygorskite [Dataset]

  • Bentabol, María
  • Pérez del Valle, Carlos
  • Hernández-Laguna, Alfonso
  • Huertas, F. Javier
Research supported by Grant PID2020-114355GB-100 funded by MCIN/AEI/ 10.13039/501100011033 and by ÒERDF a way of making Europeo. The authors thank Centro de Supercomputación y Bioinformática (SCBI/PAB), Universidad de Málaga, for the computation time. CPV thanks the GRICAD infrastructure (https://gricad.univ-grenoble-alpes.fr), which is supported by Grenoble research communities, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Protolysis of pyrophyllite {110} edge. Dataset associated with Project PID2020-114355GB-I00 PALYTECH, CONCERNING Task 1.3. Computational modeling of surface alteration of palygorskite [Dataset]

  • Bentabol, María
  • Pérez del Valle, Carlos
  • Herández-Laguna, Alfonso
  • Huertas, F. Javier
Research supported by Grant PID2020-114355GB-100 funded by MCIN/AEI/ 10.13039/501100011033 and by ÒERDF a way of making Europe. The authors thank Centro de Supercomputación y Bioinformática (SCBI/PAB), Universidad de Málaga, for the computation time. CPV thanks the GRICAD infrastructure (https://gricad.univ-grenoble-alpes.fr), which is supported by Grenoble research communities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Protolysis of pyrophyllite {130} edge. Dataset of associated to Project PID2020-114355GB-I00 PALYTECH, CONCERNING Task 1.3. Computational modeling of surface alteration of palygorskite [Dataset]

  • Bentabol, María
  • Pérez del Valle, Carlos
  • Hernández-Laguna, Alfonso
  • Huertas, F. Javier
Research supported by Grant PID2020-114355GB-100 funded by MCIN/AEI/ 10.13039/501100011033 and by ÒERDF a way of making Europe. The authors thank Centro de Supercomputación y Bioinformática (SCBI/PAB), Universidad de Málaga, for the computation time. CPV thanks the GRICAD infrastructure (https://gricad.univ-grenoble-alpes.fr), which is supported by Grenoble research communities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Mechanism of zeolites crystallization from kaolin in concentrated NaOH solutions: Formation of NaP1, NaP2, analcime, sodalite and cancrinite [Dataset]

  • Mameli, Paola
  • Fiore, Ambra M.
  • Fiore, Saverio
  • Huertas, F. Javier
Research supported by Grants PID2020-114355GB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and ÒERDF A way of making Europe, and by CGL2017Ð82331-R (MCIN Ð Spanish Ministry of Science and Innovation) to F.J.H. -Fondo Sociale Europeo (FSE), and University of Sassari (Fondo di Ateneo per la Ricerca 2019 Ð Mameli), to P.M. - IMAA (CNR, Italy) and DICATECH (Polytechnic University of Bari, Italy) financed the grant ÒSynthesis of silicate materials and their environmental applications to A.M.F., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanism of Hydrothermal Zeolite Crystallization from Kaolin in Concentrated NaOH Solutions (1–5 M): Formation of NaP1, NaP2, Analcime, Sodalite and Cancrinite

  • Mameli, Paola
  • Fiore, Ambra M.
  • Fiore, Saverio
  • Huertas, F. Javier
This article belongs to the Special Issue Crystal Structure and Characterization of Minerals and Related Nanomaterials., [Data Availability Statement] The supplementary data presented in this study are openly available in DIGITALCSIC at http://hdl.handle.net/10261/401995 (accessed on 5 November 2025). The data have been included either in the main text or in the Supplementary Materials. Further specifications on the methodology and/or results will be provided upon request., Kaolin from the Donigazza deposit (NW Sardinia, Italy) was used to investigate the mechanisms of zeolite crystallization under alkaline hydrothermal conditions. The starting material, composed mainly of kaolinite and opal-CT with minor quartz and low iron content, was reacted with NaOH solutions (1–5 mol L−1) at 100 °C for 12–168 h. XRD analyses revealed the formation of zeolitic and related phases, including NaP1, NaP2, analcime, sodalite, and cancrinite, with zeolite contents reaching up to 100%. The extent of kaolinite dissolution varied with both NaOH concentration and reaction time, with complete transformation occurring at ≥3 mol L−1 and ≥48 h. SEM imaging showed idiomorphic crystals (100 nm–10 μm) and globular nanoparticles (<50 nm), likely Na-Al-Si gels. Phase distribution reflected evolving solution chemistry, particularly changes in the Si/Al ratio due to differential dissolution of opal-CT and kaolinite. Crystallization proceeded via both classical (monomer addition) and non-classical (particle attachment) pathways, influenced by supersaturation, gel composition, and reaction kinetics. The transition from NaP1 to NaP2, and the development of metastable phases, indicate kinetic control consistent with Ostwald’s step rule. These results provide insights into the complex dynamics of zeolite formation from natural aluminosilicate precursors in alkaline environments., This research was supported by Grants PID2020-114355GB-I00 (funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”), and by CGL2017–82331-R (MCIN—Spanish Ministry of Science and Innovation) awarded to F.J.H. P.M. gratefully acknowledges financial support from Fondo Sociale Europeo (FSE) and University of Sassari (Fondo di Ateneo per la Ricerca 2019—Mameli). IMAA (CNR, Italy) and DICATECH (Polytechnic University of Bari, Italy) financed the grant “Synthesis of silicate materials and their environmental applications” awarded to A.M.F., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Protolysis Reaction on Pyrophyllite Surface Molecular Models: A DFT Study

  • Bentabol, María
  • Pérez del Valle, Carlos
  • Hernández Laguna, Alfonso
  • Huertas, F. Javier
This article belongs to the Special Issue Advances in Density Functional Theory (DFT) Calculation, Understanding the mechanisms of mineral dissolution at the atomic scale is crucial for interpreting geochemical processes in soils and sediments, particularly those involving clay minerals. This study addresses the dissolution of pyrophyllite, a model dioctahedral phyllosilicate, under acidic conditions by employing Density Functional Theory (DFT) to simulate protolysis reactions at four distinct edge surfaces ({100}, {010}, {110}, and {130}). Molecular cluster models were constructed for each edge, and the interactions of protons and hydronium ions with various oxygen sites were systematically analyzed. The results demonstrate that bridge oxygens, especially those coordinated to one silicon and two aluminum atoms, are the most reactive sites, undergoing significant bond breaking and structural distortion upon protonation, while hydroxyl groups mainly accommodate structural changes without initiating dissolution. The {110} edge was found to be the least reactive, whereas the {100}, {010}, and {130} edges exhibited the highest reactivity. Hydronium ions produced similar or greater structural changes compared to protons, with water molecules forming hydrogen bonds with the resulting structures. These findings confirm that protonation of bridge oxygens is the rate-limiting step in phyllosilicate dissolution, and that octahedral cations are released preferentially over tetrahedral ones. These findings are consistent with the conclusions drawn from the dissolution experiments. This study provides atomistic information on the dissolution mechanisms of clay minerals at a scale that exceeds the capabilities of dissolution experiments, emphasizing the importance of edge reactivity relative to extensive basal surfaces and the role of water in proton transfer and facilitating protolysis reactions., Research supported by Grants PID2020-114355GB-I00 and PID2023-146856NB-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, EU., Peer reviewed