Pasar al contenido principal

CORRELATING FUNCTIONALITY

PID2020-114548GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electronic properties and redox chemistry of N confused metalloporphyrins

  • Martins, Frederico F.
  • Swart, Marcel
Here we study the effect of metals on the characteristic Soret band of N-confused porphyrins. We used DFT calculations to study how this low-lying region of the spectrum of the NCP-2H isomer is affected by the introduction of transition metals with various (d2 , d3 , d4 and d6) d-electron configurations. The spin ground state of these complexes is mostly dependent on the number of unpaired electrons, both with and without the presence of an axial ligand. The analysis of the electronic distribution and spin density showed that these unpaired electrons are often harbored by the N-confused porphyrin ring instead of on the metal. Time-dependent DFT results indicated that the aromatic system of porphyrin is disrupted in the N-confused isomer: instead of the typical large Soret band, this now gives rise to two peaks of much lower intensity. Most metallo-porphyrins exhibited similar optical properties, with the HOMO/LUMO orbitals showing a mixed metal/porphyrin character. The only exception was the Rh metalloporphyrin that exhibited a ligand-to-metal charge transfer band with increasing intensity as function of the ligand field. This suggests Rh is the only metal whose orbitals are higher in energy than the ligand's, indicating that it is the only system where the redox processes occur on the metal, The authors would like to thank AEI/MCIN (10.13039/501100011033) for funding (CTQ2017-87392P, PID2020-114548GB-I00) and GenCat (2021 SGR 00487). FFM also thanks AEI/MCIN and the European Social Fund for a PhD studentship (PRE2018-083883)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A tale of two topological isomers: Uptuning [FeIV(O)(Me4cyclam)]2+ for olefin epoxidation

  • Chandra, Bittu
  • Ahsan, Faiza
  • Sheng, Yuan
  • Swart, Marcel
  • Que, Lawrence
The distinct oxidative reactivities reported here for the TMC-anti and TMC-syn isomers are surprising and require the examination of what factors can give rise to such differences for this class of iron complexes. In particular, our observation that the oxygen atom transfer reactivity of a nonheme FeIV=O unit can be so significantly enhanced by a simple flip in its orientation relative to its macrocyclic tetraamine host is truly remarkable and suggests that there is much more that can be learned for catalyst design by paying attention to the effect of ligand topology on the iron active site, This work was supported by the NIH (grant R35 GM-131721 to L.Q.), AEI/MCIN (grant PID2020-114548GB-I00 to M.S.), GenCat (PhD fellowship 2022 FI_B 00118 and grant 2021SGR00487 to F.A.), and a developer’s license to M.S. by SCM. We thankfully acknowledge the computer resources at Universidad de Málaga and the technical support provided by Picasso (QH-2023-1-0006). We thank Dr. Johannes Klein (University of Groningen) and Dr. Lorenzo D’Amore (Janssen Pharmaceuticals) for insightful discussions
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reductive Coupling of Nitric Oxide by Cu(I): Stepwise Formation of Mono and Dinitrosyl Species en route to a Cupric Hyponitrite Intermediate

  • Bhadra, Mayukh
  • Albert, Therese
  • Franke, Alicja
  • Josef, Verena
  • Ivanović-Burmazović, Ivana
  • Swart, Marcel
  • Moënne-Loccoz, Pierre
  • Karlin, Kenneth D.
Transition-metal-mediated reductive coupling of nitric oxide (NO(g)) to nitrous oxide (N2O(g)) has significance across the fields of industrial chemistry, biochemistry, medicine, and environmental health. Herein, we elucidate a density functional theory (DFT)-supplemented mechanism of NO(g) reductive coupling at a copper-ion center, [(tmpa)CuI(MeCN)]+ (1) {tmpa = tris(2-pyridylmethyl)amine}. At −110 °C in EtOH (<−90 °C in MeOH), exposing 1 to NO(g) leads to a new binuclear hyponitrite intermediate [{(tmpa)CuII}2(μ-N2O22-)]2+ (2), exhibiting temperature-dependent irreversible isomerization to the previously characterized κ2-O,O′-trans-[(tmpa)2Cu2II(μ-N2O22-)]2+ (OOXray) complex. Complementary stopped-flow kinetic analysis of the reaction in MeOH reveals an initial mononitrosyl species [(tmpa)Cu(NO)]+ (1-(NO)) that binds a second NO molecule, forming a dinitrosyl species [(tmpa)CuII(NO)2] (1-(NO)2). The decay of 1-(NO)2 requires an available starting complex 1 to form a dicopper-dinitrosyl species hypothesized to be [{(tmpa)Cu}2(μ-NO)2]2+ (D) bearing a diamond-core motif, en route to the formation of hyponitrite intermediate 2. In contrast, exposing 1 to NO(g) in 2-MeTHF/THF (v/v 4:1) at <−80 °C leads to the newly observed transient metastable dinitrosyl species [(tmpa)CuII(NO)2] (1-(NO)2) prior to its disproportionation-mediated transformation to the nitrite product [(tmpa)CuII(NO2)]+. Our study furnishes a near-complete profile of NO(g) activation at a reduced Cu site with tripodal tetradentate ligation in two distinctly different solvents, aided by detailed spectroscopic characterization of metastable intermediates, including resonance Raman characterization of the new dinitrosyl and hyponitrite species detected, This research was supported by the National Institutes of Health and the Spanish Ministry of Science, the Bayerisches Staatsministerium für Wissenschaftund Kunst, and the appropriate grants are gracefully acknowledged (GM28962 to K.D.K.; GM74785 to P.M.L., and CTQ2017-87392-P/PID2020-114548GB-I00 to M.S.)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Atomic radii derived from the expectation value <r4>

  • Linker, Gerrit-Jan
  • Swart, Marcel
  • Duijnen, Petrus Theodorus van
The atomic radius as a fundamental chemical descriptor for the size of a chemical element is often used in physical chemistry. Many reference sets are available, based either on experiment or calculations. For example, Alvarez compiled a set of consistent van der Waals radii (Dalton Trans. 2013, 42, 8617) based on millions of measured interatomic non-bonded distances. In quantum mechanics, there are many ways in which the atom size can be defined and obtained because the atomic radius is not an observable. Here, we show that a theoretical measure can be based on expectation values such as <r2> and <r4>. These are easily obtained from atomic electric moments, routinely generated by popular quantum chemistry codes, with full control over electronic structure, charge, spin state, etc. As such we obtain a measure for the size of free atoms H to Xe and demonstrate linear scaling of atomic size in the series as outermost s, p or d subshells are filled according to the Madelung rule. Radii derived from <r4> compare best to Alvarez's empirical reference set of van der Waals radii, and atomic radii from theoretical sources. Known periodic trends of atomic radii are well reproduced by our data. Furthermore, we demonstrate the dependence of atomic size on the electronic structure and spin state for d-block elements, This work was supported by AEI/MICIU (CTQ2017-87392-P, PID2020-114548GB-I00 and PID2023-152415NB-I00) and GenCat (2021SGR 00487), Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The peptide bond rupture mechanism in the serine proteases: an in silico study based on sequential scale models

  • Díaz Cervantes, Erik
  • Robles, Juvencio
  • Solà i Puig, Miquel
  • Swart, Marcel
Given the importance of serine proteases for biochemical processes, we have studied the peptide bond rupture mechanism using three sequential scale models as representations of the KLK5 enzyme (a protein overexpressed in ovarian cancer). The first model contains the basic functional groups of the residues that conform the catalytic triad present in serine proteases; the second model consists of considering some additional residues and, finally, the last representation includes all atoms of the KLK5 protein together with 10.000 explicit water molecules. This separation into three scale models allows us to separate the intrinsic reactivity of the catalytic triad from the process taking place in the enzyme. The methodologies employed in this work include full DFT calculations with a dielectric continuum in the first two models and a multi-level setup with a Quantum Mechanics/Molecular Mechanics (QM/MM) partition in the whole protein system. Our results show that the peptide-bond rupture mechanism is a stepwise process involving two proton transfer reactions. The rate-determining step is the second proton transfer from the imidazole group to the amidic nitrogen of the substrate. In addition, we find that the simplest model does not provide accurate results compared to the full protein system. This can be attributed to the electronic stabilization conferred by the residues around the reaction site. Interestingly, the energy profile obtained with the second scale model with additional residues shows the same trends as the full system and could therefore be considered an appropriate model system. It could be used for studying the peptide bond rupture mechanism in case full QM/MM calculations cannot be performed, or as a rapid tool for screening purposes, We thank the Laboratorio Nacional de Caracterización de Propiedades Fisicoquímicas y Estructura Molecular (UG-UAA-CONACYT, Project: 123732) for the computing time provided at the PIPILA cluster, AEI/MCIU (projects PID2020-114548GB-I00 and PID2020-113711GB-I00), the Generalitat de Catalunya (projects 2021SGR00623 and 2021SGR00487), and FEDER (UNGI10-4E-801) for financial support, Open Access funding provided thanks to the CSUC agreement with Royal Society of Chemistry (RSC)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Density Functional Theory Investigation of 2D Phase Separated Graphene/Hexagonal Boron Nitride Monolayers; Band Gap, Band Edge Positions, and Photo Activity

  • O’Sullivan, Eoin M.
  • Grobert, Nicole
  • Swart, Marcel
Creating sustainable and stable semiconductors for energy conversion via catalysis, such as water splitting and carbon dioxide reduction, is a major challenge in modern materials chemistry, propelled by the limited and dwindling reserves of platinum group metals. Two-dimensional hexagonal borocarbonitride (h-BCN) is a metal-free alternative and ternary semiconductor, possessing tunable electronic properties between that of hexagonal boron nitride (h-BN) and graphene, and has attracted significant attention as a nonmetallic catalyst for a host of technologically relevant chemical reactions. Herein, we use density functional theory to investigate the stability and optoelectronic properties of phase-separated monolayer h-BCN structures, varying carbon concentration and domain size. We find that, on average, a higher C content reduces the energetic cost of carbon inclusion per atom, as an increasingly graphitized network lowers the overall energy of the structure. Using functional HSE06, we show how the electronic bandgap of h-BN can be reduced from 5.94 to 1.61 eV with significant substitution of C in the domain (C at. % ∼ 44%) adding to the weight of evidence that suggests these segregated h-BCN systems can easily be customized. We use the location of conduction and valence band edges with respect to the potentials of HER, OER and CO2 reduction to assess the catalytic suitability of these materials, identifying three structures with appropriate band edges for these catalytic reactions. Finally, the photoactivity of the structures is assessed through TD-DFT calculations, and we propose two candidates for photocatalysis based on the segregated h-BCN system., Creating sustainable and stable semiconductors for energy conversion via catalysis, such as water splitting and carbon dioxide reduction, is a major challenge in modern materials chemistry, propelled by the limited and dwindling reserves of platinum group metals. Two-dimensional hexagonal borocarbonitride (h-BCN) is a metal-free alternative and ternary semiconductor, possessing tunable electronic properties between that of hexagonal boron nitride (h-BN) and graphene, and has attracted significant attention as a nonmetallic catalyst for a host of technologically relevant chemical reactions. Herein, we use density functional theory to investigate the stability and optoelectronic properties of phase-separated monolayer h-BCN structures, varying carbon concentration and domain size. We find that, on average, a higher C content reduces the energetic cost of carbon inclusion per atom, as an increasingly graphitized network lowers the overall energy of the structure. Using functional HSE06, we show how the electronic bandgap of h-BN can be reduced from 5.94 to 1.61 eV with significant substitution of C in the domain (C at. % ∼ 44%) adding to the weight of evidence that suggests these segregated h-BCN systems can easily be customized. We use the location of conduction and valence band edges with respect to the potentials of HER, OER and CO2 reduction to assess the catalytic suitability of these materials, identifying three structures with appropriate band edges for these catalytic reactions. Finally, the photoactivity of the structures is assessed through TD-DFT calculations, and we propose two candidates for photocatalysis based on the segregated h-BCN system, Suport del programa HPC-EUROPA3 (H2020-NFRAIA-2016-1-730897) a través de subvencions HPC175VFSY i HPC17LX3MB, AEI/MCIU (PID2020-114548GB-I00 i PID2023-152415Gent) 2021SGR00487), una llicència de desenvolupador a MS per SCM, el Consell d'Investigació en Enginyeria i Ciències Físiques (EP/T517811/T, EOS), es reconeix amablement, Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Characterization of σ and π reaction channels in hydrogen atom transfer reactions

  • Ahsan, Faiza
  • Ansari, Mursaleem
  • Klein, Johannes E.M.N.
  • Swart, Marcel
C(sp3) –H bond activation mechanisms typically involve σ- and π-channel pathways, as characterized by FeOH (or FeOC) angles of ca. 180° and 120°, respectively. It is well known that the preference for either the σ- or π-channel depends on the spin state, but doubts exist on what would be characteristic values for the FeOX (X = H or C) angles. Here we study the oxidation of methane and ethane mediated by an Fe(IV)oxo model complex through density functional theory. A systematic comparison of dispersion-corrected B3LYP (B3LYP-D2, B3LYP-D3, B3LYP-D3BJ, B3LYP-D4) and the uncorrected counterpart (B3LYP) was conducted to evaluate the role of dispersion interactions in both gas and solvent phases. Our results reveal that dispersion corrections significantly influence barriers at transition states (TSs), particularly in the solvent phase, where dispersion contributions enhance stabilization of TS structures. The σ-channel pathway dominates for high spin (S = 2), while intermediate spin (S = 1) states favor the π-channel. Dispersion effects were found to be more pronounced for ethane, where larger non-covalent interactions between the substrate and Fe(IV)oxo complex arise. The FeOX angles vary substantially depending on the choice of dispersion correction, and between gas phase and solution phase. Indeed, for the reaction with ethane the FeOX values of the σ-channel approach values that are typically associated with the π-channel. Fortunately, the Spin-Resolved Charge Displacement Function provides a clear visual tool to distinguish the two channels. These insights advance the understanding of hydrocarbon functionalization by high-valent iron-oxo species, with implications for synthetic catalyst design in homogeneous and enzymatic catalysis, The authors acknowledge the generous support of the AEI/MCIN (grants PID2020-114548GB-I00 and PID2023-152415NB-I00 to M.S., JdC fellowship JDC2022-049287-I to M.A.), GenCat (grant 2021SGR00487, IF Fellowship 2022 FI_B 00118 to F.A.) and a developer's license to M.S. by Software for Chemistry and Materials (SCM). J. E. M. N. K. acknowledges funding from the Nederlandse Organisatie voor Wetenschappelijk Onderzoek (VIDI grant VI.Vidi.223.108). Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A tale of two topological isomers: Uptuning [FeIV(O)(Me4cyclam)]2+ for olefin epoxidation

  • Chandra, Bittu
  • Ahsan, Faiza
  • Sheng, Yuan
  • Swart, Marcel
  • Que, Lawrence
TMC-anti and TMC-syn, the two topological isomers of [Fe<sup>IV</sup>(O)(TMC)(CH<inf>3</inf>CN)]<sup>2+</sup> (TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane, or Me<inf>4</inf>cyclam), differ in the orientations of their Fe<sup>IV</sup>=O units relative to the four methyl groups of the TMC ligand framework. The Fe<sup>IV</sup>=O unit of TMC-anti points away from the four methyl groups, while that of TMC-syn is surrounded by the methyl groups, resulting in differences in their oxidative reactivities. TMC-syn reacts with HAT (hydrogen atom transfer) substrates at 1.3- to 3-fold faster rates than TMC-anti, but the reactivity difference increases dramatically in oxygen-atom transfer reactions. R<inf>2</inf>S substrates are oxidized into R<inf>2</inf>S=O products at rates 2-to-3 orders of magnitude faster by TMC-syn than TMC-anti. Even more remarkably, TMC-syn epoxidizes all the olefin substrates in this study, while TMC-anti reacts only with cis-cyclooctene but at a 100-fold slower rate. Comprehensive quantum chemical calculations have uncovered the key factors governing such reactivity differences found between these two topological isomers., This work was supported by the NIH (grant R35 GM-131721 to L.Q.), AEI/MCIN (grant PID2020-114548GB-I00 to M.S.), GenCat (PhD fellowship 2022 FI_B 00118 and grant 2021SGR00487 to F.A.), and a developer’s license to M.S. by SCM. We thankfully acknowledge the computer resources at Universidad de Málaga and the technical support provided by Picasso (QH-2023-1-0006). We thank Dr. Johannes Klein (University of Groningen) and Dr. Lorenzo D’Amore (Janssen Pharmaceuticals) for insightful discussions., 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Exohedral Diels-Alder Reactivity of Endohedral Metallofullerene C36

  • Santha Bhaskaran, Athul
  • Romero del Blanco, Daniel
  • Romero Rivera, Adrian
  • Osuna Oliveras, Sílvia
  • Swart, Marcel
Understanding the exohedral reactivity of metallofullerenes is crucial for its application in various fields. By systematically controlling the trapped species inside the fullerene its reactivity can be tamed. In this work we report the preferential position of 3d metal atoms inside the C36 cage and their effect on exohedral reactivity in comparison with the neutral and the dianionic cage. The Diels-Alder (DA) reaction between butadiene and all non-equivalent [5-5], [6-5] and [6-6] C-C bonds on the fullerene cage was considered for the analysis, by using density functional theory at the S12g/TZ2P level including COSMO solvation model to elucidate the complete mechanistic pathways. Our results indicate that the preferential position of the metal ion is at the position close to the upper hexagon, and that the general trend in the reactivity of bonds follows the order [5-5] > [6-5] > [6-6]. Moreover, the encapsulation of metal atoms further enhances the reactivity of these bonds, by distorting the system and delocalizing the LUMOs all over the cage, We thank the EU (ERC-2022-CoG-101088032 to S.O.), AEI/MCIU (PID2020-114548GB-I00 to M.S., PID2021- 129034NB-100 to S.O.), GenCat (2015_FI_B_00165 fellowship to A.R-R., grant 2021SGR00487 to S.O.), Univ. Girona (IFUdG 68 2022 fellowship to A.S.B.) and a developer’s license to M.S. by SCM for financial support, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A benchmark study of dioxygen complexes based on coupled cluster and density functional theory

  • Swart, Marcel
  • Reimann, Marc
A set of five compounds containing peroxo, superoxo or bis-mu-oxo moieties has been studied in the gas phase using CCSD(T)/aug-cc-pVQZ, also in combination with Goodson's continued fraction approach. The corresponding analytical frequencies corroborate assignments of bands from experiments, and thus provide a consistent set of reference data that can be used for benchmarking a range of density functional approximations. A total of 100 density functionals have been checked for the general bond lengths, the specific peroxo/superoxo bond lengths, angles, and vibrational frequencies. There is not one density functional that performs equally well for all of these properties, not even within one class of density functionals, The authors would like to thank AEI/MCIN (CTQ2017-87392-P, PID2020-114548GB-I00) and GenCat (2021 SGR 00487) for funding