Pasar al contenido principal

ESTRUCTURA DE LA CORTEZA Y MANTO EN LAS ISLAS CANARIAS INTEGRANDO OBSERVACIONES EN EL FONDO MARINO

PID2020-114682RB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Analysis of the performance of Deep Learning automatic phase pickers for earthquake data [Dataset]

  • García Navarro, José Enrique
  • Fernández-Prieto, Luis
  • Villaseñor, Antonio
  • Sanz, Verónica
Data and figures for the manuscript “Performance of Deep Learning pickers in routine network processing application”. The dataset includes: - phase arrival times of P and S waves for 3 test datasets obtained using different Deep Learning pickers - figures showing the results of the comparisons between Deep Learning pickers, Computer resources for this study have been provided by Artemisa, funded by the European Union ERDF and Comunitat Valenciana. Additional funding has been obtained from Spanish Ministry of Science and Innovation grants CGL2017-88864-R, PID2020-114682RB-C31, and Center of Excellence Severo Ochoa accreditation to ICM-CSIC (Project CEX2019-000928-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance of Deep Learning Pickers in Routine Network Processing Applications

  • García Navarro, José Enrique
  • Fernández-Prieto, Luis
  • Villaseñor, Antonio
  • Sanz, Verónica
  • Ammirati, Jean-Baptiste
  • Díaz Suárez, Eduardo A.
  • García García, Carmen
14 pages, 9 figures, 3 tables, Picking arrival times of P and S phases is a fundamental and time‐consuming task for the routine processing of seismic data acquired by permanent and temporary networks. A large number of automatic pickers have been developed, but to perform well they often require the tuning of multiple parameters to adapt them to each dataset. Despite the great advance in techniques, some problems remain, such as the difficulty to accurately pick S waves and earthquake recordings with a low signal‐to‐noise ratio. Recently, phase pickers based on deep learning (DL) have shown great potential for event identification and arrival‐time picking. However, the general adoption of these methods for the routine processing of monitoring networks has been held back by factors such as the availability of well‐documented software, computational resources, and a gap in knowledge of these methods. In this study, we evaluate recent available DL pickers for earthquake data, comparing the performance of several neural network architectures. We test the selected pickers using three datasets with different characteristics. We found that the analyzed DL pickers (generalized phase detection, PhaseNet, and EQTransformer) perform well in the three tested cases. They are very efficient at ignoring large‐amplitude transient noise and at picking S waves, a task that is often difficult even for experienced analysts. Nevertheless, the performance of the analyzed DL pickers varies widely in terms of sensitivity and false discovery rate, with some pickers missing a significant percentage of true picks and others producing a large number of false positives. There are also variations in run time between DL pickers, with some of them requiring significant resources to process large datasets. In spite of these drawbacks, we show that DL pickers can be used efficiently to process large seismic datasets and obtain results comparable or better than current standard procedures, The authors gratefully acknowledge the computer resources at Artemisa, funded by the European Union ERDF and Comunitat Valenciana as well as the technical support provided by the Instituto de Física Corpuscular, IFIC (CSIC-UV). Antonio Villaseñor acknowledges funding from Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 grants CGL2017-88864-R, PID2020-114682RB-C31, and the Severo Ochoa Center of Excellence accreditation CEX2019-000928-S to ICM-CSIC, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Upper-lithospheric structure of northeastern Venezuela from joint inversion of surface-wave dispersion and receiver functions

  • Cabieces, Roberto
  • Arnaiz-Rodríguez, Mariano S.
  • Villaseñor, Antonio
  • Berg, Elizabeth
  • Olivar-Castaño, Andrés
  • Ventosa, Sergio
  • Ferreira, Ana M. G.
21 pages, 11 figures, supplementary material https://doi.org/10.5194/se-13-1781-2022-supplement.-- Data availability: Waveform data used in this work were retrieved from the Global Seismograph Network – Incorporated Research Institutions for Seismology (IRIS; https://doi.org/10.7914/SN/XT_2003, Vernon et al., 2003). Datasets including EGFs, dispersion measurements, Moho depth and the Vs 3D model can be freely found at https://doi.org/10.5281/zenodo.7188334 (Cabieces et al., 2022), We use 1.5 years of continuous recordings from an amphibious seismic network deployment in the region of northeastern South America and the southeastern Caribbean to study the crustal and uppermost mantle structure through a joint inversion of surface-wave dispersion curves determined from ambient seismic noise and receiver functions. The availability of both ocean bottom seismometers (OBSs) and land stations makes this experiment ideal to determine the best processing methods to extract reliable empirical Green's functions (EGFs) and construct a 3D shear velocity model. Results show EGFs with high signal-to-noise ratio for land–land, land–OBS and OBS–OBS paths from a variety of stacking methods. Using the EGF estimates, we measure phase and group velocity dispersion curves for Rayleigh and Love waves. We complement these observations with receiver functions, which allow us to perform an H-k analysis to obtain Moho depth estimates across the study area. The measured dispersion curves and receiver functions are used in a Bayesian joint inversion to retrieve a series of 1D shear-wave velocity models, which are then interpolated to build a 3D model of the region. Our results display clear contrasts in the oceanic region across the border of the San Sebastian–El Pilar strike-slip fault system as well as a high-velocity region that corresponds well with the continental craton of southeastern Venezuela. We resolve known geological features in our new model, including the Espino Graben and the Guiana Shield provinces, and provide new information about their crustal structures. Furthermore, we image the difference in the crust beneath the Maturín and Guárico sub-basins, This research has been supported by the GUANCHE project (grant no. PID2020-114682RB-C31), With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Los margenes entre las islas de Tenerife y Gran Canaria integrando observaciones sismicas y del fondo marino: proyecto Guanche, The margins between the islands of Tenerife and Gran Canaria integrating seismic and seabed observations: Guanche project

  • Estrada, Ferran
  • Bartolomé, Rafael
  • Cabieces, Roberto
  • Casas, David
  • Sánchez-Guillamón, Olga
  • Latorre Cortés, Hugo
  • Neri, Alejandra
  • Palomino, Desirée
  • Vázquez, Juan Tomás
  • Villaseñor, Antonio
XI Congreso Geológico de España, 2-6 de julio 2024, Ávila.-- 1 page, [EN] The primary objective of the Guanche project is to characterize the seismicity and subsurface structure within the Tenerife-Gran Canaria-Fuerteventura region. To achieve this, an oceanographic survey was conducted in early 2024 to acquire passive seismic waves at sea, deploying a temporary network of 17 ocean bottom seismometers provided by UTM-CSIC and GEOMAR (Germany) combined with land seismometers deployed by the National Geographic Institute. Additionally, strain data using an existing submarine telecommunication cable (DAS, Distributed Acoustic Sensing) was collected. During the survey, a 14,700 km2 multibeam bathymetric mosaic was acquired, processed by the Spanish Institute of Oceanography (IEO), and 677 km of ultra-high resolution seismic lines using a parametric sediment profiler (Topas). Preliminary results from the Tenerife-Gran Canaria area indicate the development of a complex drainage system formed by canyons and corridors embedded in avalanche debris deposits formed in the margins of both islands where several fossil and recent scars are observed. This drainage system is divided into two slopes by a topographic threshold in an NE-SW direction, at the apex of which the Enmedio volcano, the largest, is located and most of the seismicity is concentrated. Among all the active structures observed, recent measurements have revealed the presence of NNE-SSW oriented faults in the northern region of Gran Canaria, exhibiting offsets of metric scale. Additionally, a comprehensiveanalysis has been conducted on the Santa Cruz fault, which extends along the coastline dipping ENEWSW, offshore of the city bearing the same name, [ES] El objetivo del proyecto Guanche (PID2020-114682RB-C31) es caracterizar la sismicidad y la estructura del subsuelo en la región comprendida entre Tenerife-Gran Canaria-Fuerteventura. Para ello se realizó una campaña oceanográfica a principios del año 2024 parar registrar terremotos mediante 17 sismógrafos en el fondo oceánico (UTM-CSIC y GEOMAR), complementados con otros desplegados en tierra por el Instituto Geográfico Nacional y con la instalación de dos interrogadores DAS (Distributed Acoustic Sensing) en un cable submarino de telecomunicaciones. Durante la campaña se registró un mosaico batimétrico multihaz de 14.700 km2, procesado por el Instituto Español de Oceanografía, y 677 km de líneas sísmicas de ultra alta resolución con un perfilador paramétrico de sedimentos (Topas). Los datos preliminares de la zona Tenerife-Gran Canaria indican el desarrollo de un complejo sistema de drenaje formado por cañones y corredores encajados sobre depósitos de debris en avalancha originados en los márgenes de ambas islas donde se observan varias cicatrices fósiles y recientes. Este sistema de drenaje queda dividido en dos vertientes por un umbral topográfico de dirección NE-SO en cuyo vértice se sitúa el volcán submarino de Enmedio, donde se concentra mayoritariamente la sismicidad. Se constata la existencia de fallas recientes orientadas NNE-SSO al norte de Gran Canaria con saltos de orden métrico y se ha caracterizado en detalle la falla de Santa Cruz, de salto en dirección ENE-OSO, en la costa este de Tenerife, cerca de la ciudad del mismo nombre, With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

KVP: a multiscale kurtosis approach for seismic phase picking

  • Latorre Cortés, Hugo
  • Ventosa, Sergio
  • Ugalde, Arantza
  • Villaseñor, Antonio
  • Bartolomé, Rafael
  • Ranero, César R.
This work is a contribution of the Barcelona CSI that is a Grup de Recerca 2021 SGR 00429 of Generalitat de Catalunya.-- 13 pages, 9 figures, 1 table, supplementary data https://doi.org/10.1093/gji/ggaf136.-- Data Availability: The KVP code is openly available at https://github.com/B-CSI/kvp, including examples to run the package. Python implementations of FilterPicker and PS-Picker were obtained from their respective repositories at https://github.com/mbagagli/filterpicker (Bagagli 2022) and https://github.com/WayneCrawford/pspicker. PhaseNet and its pre-trained model are available at https://github.com/AI4EPS/PhaseNet. We utilized ObsPy (Krischer et al. 2015) for some data processing and analysis tasks. All figures were produced using the MatPlotLib package (https://matplotlib.org/stable/index.html). The IGN catalogue is accessible online at https://www.ign.es/web/ign/portal/sis-catalogo-terremotos. Data from the OT (Villaseñor et al. 2021) and SAFE (Ugalde et al. 2023) experiments are available from the authors on reasonable request.-- DIGITAL.CSIC https://doi.org/10.20350/digitalCSIC/18194, Automatic event detection and phase picking are critical for processing the large volumes of data produced by modern seismological instrumentation. Accurate picking is especially challenging in Distributed Acoustic Sensing (DAS) recordings, where data quality can significantly vary along segments of the fibre due to localized environmental noise and coupling issues, reducing signal-to-noise ratios (SNR). Similarly, Ocean Bottom Seismometer (OBS) data quality also suffers from these issues. To improve accuracy under diverse conditions, we developed a novel multiband kurtosis-based picking algorithm, Kurtosis-Value-Picker (KVP), that enhances phase picking for both impulsive and emergent seismic signals. Our approach uses characteristic functions (CFs) calculated with sliding windows across multiple frequency bands. Triggers are identified based on localized kurtosis jumps over a few samples, providing greater sensitivity to emergent signals than traditional finite-difference methods. Each individual CF has its own set of triggers, adding flexibility to phase picking and retaining spectral information. We validate the KVP algorithm using earthquake data recorded with DAS on two land and submarine fibre-optic cables, as well as OBS data. We also compare its performance with a widely cited, kurtosis-based algorithm, the widely used FilterPicker algorithm and the well-known PhaseNet model, using impulsive signals on nearby DAS channels as a ground truth for emergent arrivals. Our results demonstrate that KVP provides accurate picks and is suitable for complex seismic data sets, HL acknowledges the grant PRE2021-098838 funded by the Spanish Ministry of Science and Innovation MCIN/AEI/0.13039/501100011033. Funding for this project was provided through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S-21-2), the European Union NextGenerationEU/PRTR Program under projects PSI (ref. PLEC2021-007875) and TREMORS (ref. CPP2021-008869), the MCIN/AEI under project GUANCHE (ref. PID2020-114682RB-C31) and ATLANTIS (ref. PID2019-109559RB-I00) and the CSIC contract SAFE with Telxius Cable España, S. L. (ref. 20233069), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

First multidisciplinary evidence of hydrothermal activity at Enmedio deep submarine volcano (Canary Islands)

  • González-Vega, Alba
  • Vázquez, Juan Tomás
  • Lozano Rodríguez, José Antonio
  • Sánchez-Guillamón, Olga
  • Palomino, Desirée
  • Geyer, Adelina
  • Bartolomé, Rafael
  • Álvarez-Valero, Antonio M.
  • Arrieta López de Uralde, Jesús M.
  • Villaseñor, Antonio
  • Martín-Díaz, Juan Pablo
  • Presas-Navarro, Carmen
  • Escánez-Pérez, José
  • García Pérez-Piñeiro, Julio
  • Fraile-Nuez, Eugenio
The deep submarine volcano Enmedio is located between Tenerife and Gran Canaria, the two most populated islands of the Canary archipelago. This study integrates multidisciplinary data gathered from 2015 to 2024, enabling a comprehensive analysis of the geo- morphological, petrological, geochemical, and oceanographic features of this volcano. The combined findings from these disciplines confirm hydrothermal activity at the submarine volcano. The main volcanic cone is characterized by a fracture zone, which crosses it from NNW to SSE and passes over the summit, and a half-moon-shaped depression in the south-western flank, likely caused by a collapse event. In the surrounding area, at least 20 smaller volcanic reliefs have been identified, five of which present crater-like depressions. Backscatter data and seismic profiles suggest significant rock alteration at the fracture zone of Enmedio volcano. This alteration is corroborated by rock samples exhibiting surface modifications characterized by Fe-oxyhydroxide deposits, alongside microscopic filamentous textures typical of biogenic Fe-rich formations. These features suggest a strong association with hydro- thermal environments. Additionally, geochemical analyses point to magmatic differentiation processes. The physical, chemical, and biological oceanographic parameters in the seawater show temperature anomalies, water column instabilities, enhanced turbidity, enrichment in inorganic nutrient concentrations, and an overall increase in prokaryotic abundance. These anomalies were found linked to some relevant geomorphological features, such as the summit fracture zone, the half-moon depression, and the two closest smaller volcanic cones. This integrated perspective highlights Enmedio as a focal point of hydrothermal and volcanic activity, shed- ding light on the dynamic relationship between geological and oceanographic processes in the Canary archipelago., Instituto Español de Oceanografía (IEO-CSIC9 VULCANA-I, -II y -III (IEO-CSIC-2015-2023) y ESMARES- 3-Vulcana-IV (IEO-CSIC-2024-2026). Ministerio de Ciencia e Innovación del Gobierno de España (20223PAL005). Proyecto nacional español GUANCHE (ia PID2020-114682RB-) financiado por MICIU/AEI/https://doi.org/10.13039/501100011033. Fundación D. Samuel Solórzano (Universidad de Salamanca - proyecto FS/5-2012) y el Programa Propio I (Usal-2014). Convenio de Promotur Turismo Canarias para la implementación conjunta de iniciativas orientadas a la gestión inteligente y el desarrollo del producto Turismo Azul. Estos esfuerzos se enmarcan en el Plan de Recuperación, Transformación y Resiliencia (Fondos Next Generation EU) y se alinean con la Orden n.º 257/2023 de la Consejera de Turismo y Empleo, centrada en la ejecución de acciones de cohesión en destinos como parte del Plan Territorial de Canarias., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

KVP: a multiscale kurtosis approach for seismic phase picking [Dataset]

  • Ugalde, Arantza
This dataset consists of four file folders: OBS_20231215, OT_20211026, SAFE_20231113, and SAFE_20231215. The OT_20211026 and SAFE_20231113 folders are still pending upload due to their large size., This research focuses on improving automatic event detection and seismic phase picking in large and complex data sets generated by modern instruments, particularly Distributed Acoustic Sensing (DAS) and Ocean Bottom Seismometers (OBS). The authors address a major limitation of these systems: data quality often varies strongly along the fibre or between stations because of environmental noise, poor coupling, and low signal-to-noise ratios, which makes accurate picking especially difficult for emergent arrivals. To overcome this problem, they developed a new multiband kurtosis-based algorithm called Kurtosis-Value-Picker (KVP), designed to enhance the detection of both impulsive and emergent seismic signals. The method computes characteristic functions in several frequency bands using sliding windows and identifies triggers from localized jumps in kurtosis, which makes it more sensitive to subtle arrivals than traditional approaches. The algorithm was validated with earthquake records from land and submarine DAS cables as well as OBS data, and its performance was compared with FilterPicker and PhaseNet. The results show that KVP provides accurate and robust picks across diverse recording conditions, preserves useful spectral information, and is well suited for the analysis of complex seismic data sets, Grant PRE2021-098838 funded by the Spanish Ministry of Science and Innovation MCIN/AEI/0.13039/501100011033; European Union NextGenerationEU/PRTR Program under projects PSI (ref. PLEC2021-007875) and TREMORS (ref. CPP2021-008869), the MCIN/AEI under project GUANCHE (ref. PID2020-114682RB-C31) and ATLANTIS (ref. PID2019-109559RB-I00) and the CSIC contract SAFE with Telxius Cable España, S. L. (ref. 20233069), This work contributes to the Institut de Ciències del Mar "Severo Ochoa Centre of Excellence" accreditation CEX2024-001494-S funded by AEI 10.13039/501100011033 of the Spanish Ministry of Science and Innovation, The data provided correspond to the datasets used to generate the figures presented in the associated research paper. This is a subset of the full experimental datasets, selected to ensure reproducibility of the results shown in the publication. The datasets are organized into experiment-specific folders, each corresponding to a deployment or acquisition campaign: • OBS_YYYYMMDD – Ocean Bottom Seismometer (OBS) data • OT_YYYYMMDD – DAS dataset from OT experiment • SAFE_YYYYMMDD – DAS dataset from SAFE experiment All timestamps are in UTC. 1. OBS Data (miniSEED format) Files follow the structure: <station>.<channel>.<YYYY>.<DAY>.<HH>.<MM>.<SS>.mseed where: • <station> – OBS station identifier (e.g., obs02) • <channel> – Seismic component: o EHZ – Vertical o EH1 – Component 1 o EH2 – Component 2 o EHH – Hydrophone • <YYYY> – Year • <DAY> – Day of year • <HH.MM.SS> – Start time (UTC) • .mseed – miniSEED seismic format Organization: • Continuous full-day recording • One file per component 2. DAS Data - OT Experiment (HDF5 format) Files follow the structure: OT_<YYYYMMDD>_<NN>.h5 where: • <YYYYMMDD> – Acquisition date • <NN> – Time segment • .h5 – HDF5 format Organization: • Full-day acquisition split into short time segments (15 minutes per file) • Total of 95 files covering the day 3. DAS Data – SAFE Experiment (Event-based and Continuous) a) Event dataset (15/12/2023) SAFE_<YYYYMMDD>.h5 • Single file containing the full event waveform b) Continuous dataset (13/11/2023) SAFE_<YYYYMMDD>_<NN>.h5 where: • <NN> – Time segment Organization: • Full-day recording split into 15-minute segments • Total of 95 files covering the entire day, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Seismic ambient noise imaging along the fibre-optic cable of the offshore CASTOR gas storage field

  • Ventosa, Sergio
  • Ugalde, Arantza
  • Villaseñor, Antonio
18 pages, 9 figures, supplementary data https://doi.org/10.1093/gji/ggag197.-- Data Availability: The CPU and GPU accelerated versions of code implementing 1-bit and wavelet phase cross-correlation (doi: 10.20350/digitalCSIC/13837), and the two-stage ts-PWS (doi: 10.20350/digitalCSIC/13846) are open source under the LGPL v3 license, available also at the S. Ventosa GitHub repository (https://github.com/sergiventosa; S. Ventosa et al. 2017, 2019). Workflow codes were written with Python and Obspy (L. Krischer et al. 2015), Linux shell scripts and Matlab. The DAS data are available upon any request that includes a 5 TB hard disc with a return address written on the back, and the borehole and acoustic well-log data are available through the repository of the Instituto Geológico y Minero de España (IGME-CSIC; https://info.igme.es/hidrocarburos/), SUMMARY: Continuous, high-density strain and strain-rate distributed acoustic sensing (DAS) recordings are valuable for resolving the shallow Earth’s structure at a low cost, especially in environments that are otherwise difficult to access, such as continental shelves and near-coastal oceanic crust. In this study, we apply seismic ambient-noise methods to extract high-quality empirical Green’s functions (EGFs) from natural noise sources and model the velocity structure along a 30-km-long dark fibre-optic cable connecting the offshore CASTOR gas storage field in the Gulf of Valencia (Spain) with the associated land facility. We extract broad-band EGFs containing a rich variety of seismic waves using wavelet phase cross-correlation and time-scale phase-weighted stacking methods. In the common-source EGF gathers, clean fundamental and first-overtone Scholte waves dominate the marine channel pairs, while the fundamental Rayleigh mode appears in the land channel pairs. In addition, weak wavefields reflected from the basin edge follow the main surface waves. We then construct a 2-D V<inf>s</inf> model from local phase-velocity observations of the fundamental and first-overtone Scholte waves by solving pointwise depth inversions using Markov chain Monte Carlo methods. The model resolves the marine sedimentary basin from very shallow water-saturated sediments to depths exceeding 1 km, identifying the Amposta Central Fault and the basement bedrock west of this fault at roughly 1 km depth. These results help refine the offshore velocity model along the cable in a region where induced seismic activity has been observed, improving the accuracy of seismic monitoring and seismic hazard characterization, This work was supported by the European Union NextGeneration EU/PRTR Program under projects PSI (PLEC2021-007875) and TREMORS (CPP2021-008869), the MCIN/AEI under projects GUANCHE (PID2020-114682RB-C31) and FERMAT (PID2024-162301OB-C21), and the ‘Severo Ochoa’ grant for excellence CEX2024-001494-S funded by AEI 10.13039/501100011033, Peer reviewed