Pasar al contenido principal

CARACTERIZACION MULTIDIMENSIONAL DE MATERIALES URBANOS: IMPACTO SOBRE EL AMBIENTE EXTERIOR, LA DEMANDA ENERGETICA Y EL BIENESTAR DE LOS CIUDADANOS

PID2020-114873RB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Façade Strategies for Climate Resilience: The Impact of Thermal Mass and Albedo on Urban Microclimates Across Different Climatic Zones

  • Alchapar, Noelia
  • Giancola, Emanuela
  • Pérez Álvarez-Quiñones, Gloria
  • Terraza, Maira
  • Pezzuto, Cláudia
[Data Availability Statement] This article is a revised and expanded version of a paper entitled “Façade Construction Technologies and Their Impact on the Urban Microclimate: A Comparative Study between the Cities of Madrid and Mendoza”, which was presented at VII Ibero-American Congress of Smart Cities. ICSC-CITIES 2024 conference in San José, Costa Rica, in November 2024. The original contributions presented in this study are included in the article. Further inquiries can be directed to the corresponding author., The intensification of thermal stress in cities due to urbanization and climate change underscores the urgent need to improve outdoor habitability. This study analyses the influence of three opaque façade technologies—traditional, lightweight and external thermal insulation composite systems—combined with two albedo levels (0.30 and 0.80), on summer outdoor conditions in Mendoza (Argentina), Madrid (Spain) and Campinas (Brazil). Using a calibrated microclimatic model with ENVI-met v5.6 software, a digital replica of a 10-storey urban canyon was simulated to generate 18 scenarios, assessing the effect of façade thermal mass and reflectivity on the urban microclimate. The results show that (i) scenarios that mainly affect air temperature (AT) are those that modify the thermal mass of the façade technologies. For example, traditional technology with a low albedo reduce maximum AT by up to 1.2 °C in Campinas, 0.89 °C in Mendoza, and 0.81 °C in Madrid compared to light technology with the same albedo level. (ii) Mean radiant temperature (MRT) increases significantly in scenarios involving lightweight façade by 4.53 °C in Madrid, 4.46 °C in Mendoza, and 3.39 °C in Campinas. Conversely, increasing façade albedo further amplifies MRT due to multiple reflections in urban canyons with increases of 6.50 °C in Campinas, 6.09 °C in Mendoza, and 5.33 °C in Madrid. The impact is more pronounced with traditional façades. (iii) Traditional façades and low-albedo ETIC systems experience the fewest hours of very high thermal stress (UTCI > 38 °C), whereas lightweight façades increase exposure to extreme heat. Overall, air temperature is primarily determined by façade thermal mass, mean radiant temperature by surface reflectivity, and thermal comfort by the combined effect of both. These findings confirm that high reflectivity can be counterproductive in dense urban canyons, emphasizing the importance of climate- and morphology-sensitive façade strategies for urban resilience., This work was supported by URBAN-TherCOM Project (Grant PID2020–114873RA-C33) and mateMAD Project (Grant PID2020-114873RB-C31) both funded by MCIN/AEI/10.13039/501100011033. They also thank the support by the São Paulo Research Foundation (FAPESP) under grant #2023/09875-1 and #2024/01299-4, and National Scientific and Technical Research Council of Argentina (CONICET) under grant #TE_2023_1_1012613., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Database of visible reflectance, solar reflectance and emissivity of urban materials

  • Pérez Álvarez-Quiñones, Gloria
  • Herrera Serrano, Leticia
  • Montero, Israel
  • Alonso, Carmen
  • Frutos Vázquez, Borja
  • Martín-Consuegra, Fernando
Methods used for Visible and Solar Reflectance data: Reflectance spectra in the 380 nm - 1700 nm wavelength range were collected from one sample of each product using a fiber-optic portable equipment. For products with application in facades (only in facades or in facades and other applications) and for products with application only in roofs, a high-power tungsten halogen radiation source from Ocean Optics, a 50-mm integrating sphere from Ocean Optics and two spectrometers from Stellarnet (Black Comet for the 380-1050 nm wavelength range and Dwarf Star for the 900-1700 nm range) were used. For products with application only in pavements a tungsten halogen lamp with a color-equalizing filter from Stellarnet was used connected to the two spectrometers via a fiber optic reflectance probe from Ocean Optics, in which seven illumination fibers are located around a central reading fiber. The probe was placed at an angle of 90º/45º with respect to the sample surface for non-glossy/glossy samples. For each sample, reflectance spectra were measured at different points following a pattern to cover the whole surface. The visible and solar reflectance values were calculated from each spectrum following the procedure defined at the UNE EN 410 standard and the mean values and the standard deviation values were collected., Method used for Emissivity data: Emissivity data were collected from one sample of each product using an ET-100 portable emissometer from Surface Optics Corporation. The instrument measures the directional-hemispherical reflectance of the analyzed surface at two radiation incidence angles (20° and 60°), across six wavelength intervals covering the range of 1.5 to 21 µm. From the reflectance data, the instrument calculates the directional thermal emittance at 20° and 60°, and derives the hemispherical total emittance (HTE) from the values ​​obtained at 20°.For each sample, the HTE was measured at different points following a pattern to cover the whole surface. The mean and standard deviation values calculated by the equipment were collected in the data base for the Emissivity., Methods for processing the data: Python code was used to process reflectance spectra and to calculate the visible and solar reflectance values from the reflectance spectra., This dataset compiles visible reflectance, solar reflectance, and thermal emissivity values for 181 commercial urban materials commonly used in façades, roofs, and pavements. The objective of the research is to support the characterization of urban surfaces and to enable analyses of their impact on outdoor microclimates, building energy demand, and urban thermal comfort. Data were collected between 2023 and 2025 within the mateMad research project., This database is part of the Project "Caracterización multidimensional de materiales urbanos: impacto sobre el ambiente exterior, la demanda energética y el bienestar de los ciudadanos (mateMad), grant PID2020-114873RB-C31 funded by MCIN/AEI/10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Catalogue and mapping of the thermo-optical properties of urban coatings in use. Two case studies of vulnerable neighbourhoods in Madrid: Orcasur and Picazo, Catálogo y mapas de las propiedades termo-ópticas de materiales urbanos de acabado superficial en uso. Dos casos de estudio de barrios vulnerables de Madrid: Orcasur y Picazo

  • Martín-Consuegra, Fernando
  • Herrera Serrano, Leticia
  • Pérez Álvarez-Quiñones, Gloria
  • Alonso Rodríguez, Pablo
  • Montero, Israel
  • Martínez, Arturo
  • Alonso, Carmen
  • Frutos Vázquez, Borja
Description of methods used for collection/generation of data: The thermo-optical parameters of pavements and façades were measured in situ using portable equipment. For roofs, data from manufacturers' samples measured in the laboratory were used. The identification of roof finishes was carried out using aerial photogrammetry, based on RGB colour coordinates., Methods for processing the data: Geographical information, including the quantification of surface areas of the different coatings that cover the urban envelope, is combined with the thermo-optical characterisation of the materials that compose it., Instrument- or software-specific information needed to interpret/reproduce the data, please indicate their location: - maps of surface finish materials (pavements, roofs, and facades). In pdf format, any PDF viewing program can be used. - data sheets of the different urban coatings found in the study case. In pdf format. - georeferenced vector files of urban finish maps: Any GIS platform can be used. Open source QGIS software was used to process the data. - catalogue of the thermos-optical properties of surface finishing materials in use. In csv format, any spreadsheet software program can be used for editing., Standards and calibration information, if appropriate: SRC (coordinate reference system): EPGS:3042 – ETRS89 / UTM zone 30 (N-E), This dataset compiles visible reflectance, solar reflectance, and thermal emissivity values for 94 in use urban materials found in façades and pavements found and measured in situ in two neighbourhoods in Madrid: Orcasur and Picazo. These urban areas were selected as study cases for the Matemad research Project. The objective of the research is to support the characterization of urban surfaces and to enable the assessment of their impact on outdoor microclimates, building energy demand, and urban thermal comfort. Data were collected between 2023 and 2025 within the project., This dataset is part of the Project "Caracterización multidimensional de materiales urbanos: impacto sobre el ambiente exterior, la demanda energética y el bienestar de los ciudadanos (mateMad), grant PID2020-114873RB-C31 funded by MCIN/AEI/10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Database of visible reflectance, solar reflectance and emissivity of urban materials (Version 2)

  • Pérez Álvarez-Quiñones, Gloria
  • Herrera Serrano, Leticia
  • Alonso Rodríguez, Pablo
  • Martínez, Arturo
  • Montero, Israel
  • Alonso, Carmen
  • Frutos Vázquez, Borja
  • Martín-Consuegra, Fernando
Upon reception of samples of urban materials from a manufacturer, a reference was assigned with the general format "X_Y_z", where "X" is a number identifying the manufacturer, "Y" is a number identifying the specific product and "z" is a code identifying the type of material according to its composition, its application within the urban envelope and the product type according to its format. Generic information of the sample was collected in the database for each reference. This information includes three groups of data: - Commercial information: name of the manufacturer and name of the commercial product. - Sample classification: type of material according to its composition (lime-based, cement-based, organic-based, bituminous, ceramic, metallic, or stone), its application in the urban envelope (facade, pavement, roof, or combinations of these) and the type of product according to its format (paving stone, tile, floor tile, brick, sheet, slab, mortar, paint, plate, board or roof tile). - Physical properties of the specific sample measured: sample surface shape, dimensions (in mm) and weight (in kg). - Appearance of the specific sample measured: qualitative assessment of color, tone, texture to the touch and texture to the eye. These parameters strongly depend on the perception of the observer, although some general criteria were defined: Color can take values Red, Pink, Orange, Yellow, Green, Blue, Purple, White (includes pure white, off-white and light beige), Grey, Black (only pure black), Brown (includes terracota, tan, taupe and beige when not light), Metallic and Multicolor. For non-uniform materials within the same color range, the color is assigned based on the overall appearance of the material. Tone can take values Light, Medium and Dark and is relative to the specific color so it is not assigned for white and black colors. Texture to the touch can take values: Smooth (only for perfectly smooth surfaces); Medium (includes surfaces with low and medium roughness); Rough (surfaces with high roughness) and Grooves (surfaces showing variations in height in defined directions). Finally, the texture to the eye refers to the predominant surface appearance and can take values: Granular (grains are distinguishable either by surface voids or by a mixture of different materials); Wood (veining imitating the appearance of Wood); Marble (veining imitating the appearance of marble); Veined (areas of different appearance are distinguishable, either by different roughness, or by different colors and/or materials and the result imitates neither wood nor marble); Uniform (similar appearance and no grain across the entire surface); and Other., The samples were characterized to obtain the thermo-optical parameters. - Reflectance spectra in the 380 nm - 1700 nm wavelength range were collected from one sample of each product using a fiber-optic portable equipment. For products with application in facades (only in facades or in facades and other applications) and for products with application only in roofs, a high-power tungsten halogen radiation source from Ocean Optics, a 50-mm integrating sphere from Ocean Optics and two spectrometers from Stellarnet (Black Comet for the 380-1050 nm wavelength range and Dwarf Star for the 900-1700 nm range) were used. For products with application only in pavements a tungsten halogen lamp with a color-equalizing filter from Stellarnet was used connected to the two spectrometers via a fiber optic reflectance probe from Ocean Optics, in which seven illumination fibers are located around a central reading fiber. The probe was placed at an angle of 90º/45º with respect to the sample surface for non-glossy/glossy samples. For each sample, reflectance spectra were measured at different points following a pattern to cover the whole surface. From each spectrum measured in a sample, the visible reflectance (RV) and solar reflectance (RS) values were calculated following the procedure defined at the UNE EN 410:2011 standard; the visible/solar absorptance values (AV/AS) were calculated as the unity minus the corresponding reflectance value, as all the samples analyzed are opaque; and the color coordinates in the CIE 1976 L*a*b* colour space were calculated following the procedure defined at UNE-EN ISO/CIE 11664-4:2020 standard. The mean and standard deviation values of these parameters were collected for each sample in the database., - Emissivity data were collected from one sample of each product using an ET-100 portable emissometer from Surface Optics Corporation. The instrument measures the directional-hemispherical reflectance of the analyzed surface at two radiation incidence angles (20° and 60°), across six wavelength intervals covering the range of 1.5 to 21 µm. From the reflectance data, the instrument calculates the directional thermal emittance at 20° (E20) and at 60° (E60), and derives from the values obtained at 20° the hemispherical total emittance (EH) that represents the emissivity. For each sample, the surface was measured at different points following a pattern to cover the whole area. The mean and standard deviation values for the two directional and the hemispherical emittances of each sample were calculated by the equipment and collected for each sample in the database., Python code was used to process the spectra and make the necessary corrections to obtain the absolute total reflectance, to calculate the visible and solar reflectance/absortance values and the color coordinates from the reflectance spectra, and to collect all the information of each sample both in a database in Excel format and in a product sheet., This dataset compiles thermo-optical, physical and visual properties of 236 commercial urban materials commonly used in façades, roofs and pavements. The database includes information on material classification, physical characteristics, surface appearance, visible and solar reflectance, visible and solar absorptance, thermal emittance and CIE L*a*b* colour coordinates. Data were collected between January 2023 and July 2026 through laboratory measurements using standardized experimental procedures and processed with Python-based tools. The dataset supports the characterization of urban materials and facilitates research on urban microclimates, building energy performance, thermal comfort, climate adaptation and the development of sustainable urban environments., This dataset was generated as part of the mateMad project (PID2020-114873RB-C31), funded by MCIN/AEI; the PAULIA project (CPP2022-009932), funded by MCIN/AEI and the European Union–NextGenerationEU/PRTR; and the ZEBAI project (Grant Agreement 101138678), funded by the European Union's Horizon Europe research and innovation programme., No, This dataset is Version 2 of Database of visible reflectance, solar reflectance and emissivity of urban materials. It supersedes the previous release by extending the temporal coverage (2023–2026), increasing the number of commercial urban materials from 181 to 236, and enriching the database with new physical, visual and thermo-optical information. In addition to visible reflectance, solar reflectance and emissivity, this version includes visible and solar absorptance, directional thermal emittance (E20 and E60), hemispherical thermal emittance (EH), CIE L*a*b* colour coordinates, and descriptive information on the materials' physical characteristics and surface appearance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of urban surface materials through UAV-based thermal imaging and in situ data collection. Two case study in Madrid (Spain)

  • Arranz, Beatriz
  • Burgos-Bayo, Raquel
  • Román López, Emilia
  • Aguirre de Mata, Julián
  • Martín-Consuegra, Fernando
The urban materials surface interacts with solar energy, and these interactions can significantly influence the thermal environment, contributing to the Urban Heat Island effect. The work presented here responds to the need to better understand the thermal behavior of urban surfaces during the summer period under real conditions of solar exposure. The project focus on analyzing two case studies located in neighborhoods affected by intense Urban Heat Island and social vulnerability, urban overheating rises urban vulnerability. The main objective of this work is to characterize the thermo-optical properties and thermal behaviour of representative urban materials using an integrated methodology combining UAV thermal imagery and in situ measurements, obtaining values of reflectivity, emissivity, and surface temperature. The two neighbourhoods are used as complementary case studies to evaluate the applicability and robustness of the proposed methodology under real urban conditions, rather than as experimental replicates intended for direct thermal comparison. This characterization will help identify how commonly used materials behave thermally and support the proposal of improvements and intervention priorities., This research was funded by Spanish Agencia Estatal De Investigación through Programa Estatal de I+D+i Orientada a los Retos de la Sociedad: Grant PID2020-114873RB-C32, Grant PID2020- 114873RB-C31 and Grant BIA2017-83231-C2-1-R funded by MCIN/ AEI/10.13039/501100011033., Peer reviewed