Pasar al contenido principal

DESPLIEGUE PERMANENTE DE VEHICULOS SUBMARINOS AUTONOMOS BI-MANUALES PARA LA INTERVENCION

PID2020-115332RB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Autonomous Underwater Vehicle Docking Under Realistic Assumptions Using Deep Reinforcement Learning

  • Palomeras Rovira, Narcís
  • Ridao Rodríguez, Pere
This paper addresses the challenge of docking an Autonomous Underwater Vehicle (AUV) under realistic conditions. Traditional model-based controllers are often constrained by the complexity and variability of the ocean environment. To overcome these limitations, we propose a Deep Reinforcement Learning (DRL) approach to manage the homing and docking maneuver. First, we define the proposed docking task in terms of its observations, actions, and reward function, aiming to bridge the gap between theoretical DRL research and docking algorithms tested on real vehicles. Additionally, we introduce a novel observation space that combines raw noisy observations with filtered data obtained using an Extended Kalman Filter (EKF). We demonstrate the effectiveness of this approach through simulations with various DRL algorithms, showing that the proposed observations can produce stable policies in fewer learning steps, outperforming not only traditional control methods but also policies obtained by the same DRL algorithms in noise-free environments, Work on this article has been supported by the PLOME project (Ref. PLEC2021-007525/AEI/10.13039/501100011033), and the COOPERAMOS-Cooperative Persistent RobotS for Autonomous ManipulatiOn Subsea projectv (Ref. PID2020-115332RB-C32)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Linewise Non-Rigid Point Cloud Registration

  • Castillón, Miguel
  • Ridao Rodríguez, Pere
  • Siegwart, Roland
  • Cadena, César
Robots are usually equipped with 3D range sensors such as laser line scanners (LLSs) or lidars. These sensors acquire a full 3D scan in a line by line manner while the robot is in motion. All the lines can be referred to a common coordinate frame using data from inertial sensors. However, errors from noisy inertial measurements and inaccuracies in the extrinsic parameters between the scanner and the robot frame are also projected onto the shared frame. This causes a deformation in the final scan containing all the lines, which is known as motion distortion . Rigid point cloud registration with methods like ICP is therefore not well suited for such distorted scans. In this paper we present a non-rigid registration method that finds the rigid transformation to be applied to each line in the scan in order to match an existing model. We fully leverage the continuous and relatively smooth robot motion with respect to the scanning time to formulate our method reducing the computational complexity while improving accuracy. We use synthetic and real data to benchmark our method against a state-of-the-art non-rigid registration method. Finally, the source code for the algorithm is made publicly available, This work was supported in part by the European Commission through ATLANTIS Project under Grant H2020-ICT-2019-2-871571, in part by the Spanish Ministry of Science through Projects PER2IAUV and OPTIHROV under Grants PID2020-115332RB-C32 and PDC2021-120791-C21, in part by the Doctoral Grant of the University of Girona under Grant IFUdG2019, and in part by the mobility Grant IFMobUdG2019. (Corresponding author: Miguel Castillón)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sparus Docking Station: A current aware docking station system for a non-holonomic AUV

  • Esteba Masjuan, Joan
  • Cieśląk, Patryk
  • Palomeras Rovira, Narcís
  • Ridao Rodríguez, Pere
This paper presents the design and development of a funnel-shaped Sparus Docking Station intended for the non-holonomic torpedo-shaped Sparus II Autonomous Underwater Vehicle. The Sparus Docking Station is equipped with sensors and batteries, allowing for a stand-alone long-term deployment of the vehicle. An inverted Ultra Short Base-Line system is used to locate the Docking Station as well as to provide long-term drift-less vehicle navigation. The Sparus Docking Station is able to observe the ocean currents using a Doppler Velocity Log, being motorized to allow its self-alignment with the current. Moreover, a docking algorithm accounting for the current is used to guide the robot during the docking maneuver. The paper reports consecutive successful experimental results of the docking maneuver in sea trials in two different countries, Founded from the European Union's Horizon 2020 research and innovation programme, under the Grant Agreement number 871571. Also, in collaboration with the projects Platform for Long-lasting Observation of Marine Ecosystems PLEC2021-007525, Despliegue Permanente de Vehículos Submarinos Autónomos Bi-Manuales para la Intervención PID2020-115332RB-C32, and Vehículo Inalámbrico Híbrido Operador Autónoma/Remotamente—OPTHIROV PDC2021-120791-C21, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Three-Dimensional Binary Marker: A Novel Underwater Marker Applicable for Long-Term Deployment Scenarios

  • Chaarani, Alaaeddine
  • Cieśląk, Patryk
  • Esteba Masjuan, Joan
  • Eichhardt, Ivan
  • Ridao Rodríguez, Pere
Traditional 2D optical markers degrade quickly in underwater applications due to sediment accumulation and marine biofouling, becoming undetectable within weeks. This paper presents a Three-Dimensional Binary Marker, a novel passive fiducial marker designed for underwater Long-Term Deployment. The Three-Dimensional Binary Marker addresses the 2D-markers limitation through a 3D design that enhances resilience and maintains contrast for computer vision detection over extended periods. The proposed solution has been validated through simulation, water tank testing, and long-term sea trials for 5 months. In each stage, the marker was compared based on detection per visible frame and the detection distance. In conclusion, the design demonstrated superior performance compared to standard 2D markers. The proposed Three-Dimensional Binary Marker provides compatibility with widely used fiducial markers, such as ArUco and AprilTag, allowing quick adaptation for users. In terms of fabrication, the Three-Dimensional Binary Marker uses additive manufacturing, offering a low-cost and scalable solution for underwater localization tasks. The proposed marker improved the deployment time of fiducial markers from a couple of days to sixty days and with a range up to seven meters, providing robustness and reliability. As the marker survivability and detection range depend on its size, it is still a valuable innovation for Autonomous Underwater Vehicles, as well as for inspection, maintenance, and monitoring tasks in marine robotics and offshore infrastructure applications, This paper has been supported by the TANDEM Project (PLEC2023-149910OB-C31) and the COOPERAMOS Project (PID2020-115332RB-C32) funded by the Spanish Ministry of Science and Innovation. Beside the projects, Author Alaaeddine is a candidate of the Joan Oró Grants for the recruitment of predoctoral research staff in training: (2024 FI-3 00065), 9