Pasar al contenido principal

EXPERIMENTOS, SIMULACION Y TEORIA DE LA AUTOORGANIZACION EN SISTEMAS BIOLOGICOS

PID2020-115722GB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Impact of amylenes in dipeptide-mediated phospholipid vesicle integrity and aggregation

  • Villanueva, Martín Eduardo
  • Troncoso, Jacobo
  • Losada Pérez, Patricia
  • Jover Ramos, Aida
Interactions between lipid membranes are central to biological, biochemical, and biophysical processes. While adhesion between intact vesicles typically requires complex molecular linkers to overcome electrostatic and hydration repulsions, aggregation involves bilayer disruption and loss of vesicle integrity, a phenomenon more often associated with pathology. Here we report a minimal and straightforward route to induce aggregation of zwitterionic vesicles through the combined action of diphenylalanine (Phe-Phe), a dipeptide motif of the Alzheimer's β-amyloid peptide, and amylene, a small apolar alkene used as a chloroform stabilizer. Using NMR spectroscopy, microscopy, and thermodynamic and nanomechanical characterization, we demonstrate that Phe-Phe alone perturbs bilayer organization only mildly, but in the presence of amylene it synergistically drives membrane disruption and vesicle aggregation. These results highlight how the interplay of small molecules can reorganize zwitterionic membranes and eventually induce spontaneous aggregation.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Thermodynamic properties of sodium deoxycholate at the gel-sol transition

  • Jover Ramos, Aida
  • Troncoso, Jacobo
  • Gregorio, Maria Chiara di
  • Fraga López, Francisco
Sodium deoxycholate forms supramolecular aggregates in aqueous solution that are strongly dependent on temperature and pH. Upon fine tuning of these physicochemical parameters, two supramolecular aggregates can be achieved: a nanotubular phase having viscoelastic, gel-like, behavior and a sponge liquid phase. In this work, the thermodynamics of the transition between the two phases is characterized. Temperatures, volumes, and enthalpies of such transition have been experimentally determined using vibrating tube densitometry and differential scanning calorimetry. In addition, electron microscopy is used to follow the morphological transition between the two supramolecular structures. The dependencies of the thermodynamic properties with the pH and surfactant concentration of the solution are characterized, and the micrographs obtained from electron microscopy is used to explain the thermodynamics of the system
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Water’s unusual thermodynamics in the realm of physical Chemistry

  • Cerdeiriña Alvarez, Claudio
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, While it is known since the early work by Edsall, Frank and Evans, Kauzmann, and others that the thermodynamics of solvation of nonpolar solutes in water is unusual and has implications for the thermodynamics of protein folding, only recently have its connections with the unusual temperature dependence of the density of solvent water been illuminated. Such density behavior is, in turn, one of the manifestations of a nonstandard thermodynamic pattern contemplating a second, liquid−liquid critical point at conditions of temperature and pressure at which water exists as a deeply supercooled liquid. Recent experimental and computational work unambiguously points toward the existence of such a critical point, thereby providing concrete answers to the questions posed by the 1976 pioneering experiments by Speedy and Angell and the associated “liquid−liquid transition hypothesis” posited in 1992 by Stanley and co-workers. Challenges of this phenomenology to the branch of Statistical Mechanics remain., Agencia Estatal de Investigación | Ref. PID2020-115722GB-C22
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Liquid-liquid criticality in TIP4P/2005 and three-state models of water

  • Cerdeiriña Alvarez, Claudio
  • Gonzalez Salgado, Diego
  • Troncoso Casares, Jacobo Antonio
Molecular dynamics simulations leading to the isothermal compressibility, the isobaric thermal expansivity, and the isobaric heat capacity of TIP4P/2005 water are found to be consistent with the coordinates of its second, liquid–liquid critical point reported recently by Debenedetti et al. [ Science 2020, 369, 289−292]. In accord with the theory of critical phenomena, we encounter that the rise in the magnitude of these response functions as temperature is lowered is especially marked along the critical isochore. Furthermore, response-function ratios provide a test for thermodynamic consistency at the critical point and manifest nonuniversal features sharply distinguishing liquid–liquid from standard gas–liquid criticality. The whole pattern of behavior revealed by simulations is qualitatively the same as the one of a three-state Ising model of water exhibiting a low-temperature liquid–liquid critical point. Exact solutions for the two-state components of such a three-state model are also provided., Agencia Estatal de Investigación | Ref. PID2020-115722GB-C22, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Ising paradigm in isobaric ensembles

  • Cerdeiriña Alvarez, Claudio
  • Troncoso Casares, Jacobo Antonio
We review recent work on Ising-like models with “compressible cells” of fluctuating volume that, as such, are naturally treated in NpT and μpT ensembles. Besides volumetric phenomena, local entropic effects crucially underlie the models. We focus on “compressible cell gases” (CCG), namely, lattice gases with fluctuating cell volumes, and “compressible cell liquids” (CCL) with singly occupied cells and fluctuating cell volumes. CCGs contemplate singular diameters and “Yang–Yang features” predicted by the “complete scaling” formulation of asymmetric fluid criticality, with a specific version incorporating “ice-like” hydrogen bonding further describing the “singularity-free scenario” for the low-temperature unusual thermodynamics of supercooled water. In turn, suitable CCL variants constitute adequate prototypes of water-like liquid–liquid criticality and the freezing transition of a system of hard spheres. On incorporating vacant cells to such two-state CCL variants, one obtains three-state, BEG-like models providing a satisfactory description of water’s “second-critical-point scenario” and the whole phase behavior of a simple substance like argon. Future challenges comprise water’s crystal–fluid phase behavior and metastable states., Agencia Estatal de Investigación | Ref. PID2020-115722GB-C22
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Effect of diphenylalanine on model phospholipid membrane organization

  • Bar, Laure
  • Losada Pérez, Patricia Maria
  • Troncoso Casares, Jacobo Antonio
The influence of peptides over the thermodynamic and mechanic stability of lipid membranes is studied. To this end, diphenylalanine and 1,2-dimyristoyl-sn-glycero-3-phosphocholine are selected as model systems for peptide and lipid bilayers, respectively. Vesicles at different peptide-lipid ratios were prepared and characterized using different experimental methodologies. Densitometry and differential scanning calorimetry were used to determine the influence of the peptide over the melting transition properties (temperature, volume and enthalpy) for bulk multilamellar vesicles, whereas viscoelastic and nanomechanical properties of supported vesicle layers and supported lipid bilayers were studied using quartz crystal microbalance with dissipation monitoring and atomic force microscopy, respectively. The influence of the sample preparation methodology -solvents for obtaining the lipid films and hydration media- is also characterized. The analysis of the experimental data reveals that diphenylalanine affects the lipid membrane, decreasing lipid molecular cooperativity in a concentration-dependent manner and inducing an overall weakening of membrane organization., Agencia Estatal de Investigación | Ref. PID2020-115722GB-C22, Fonds de la Recherche Scientifique – FNRS (Francia) | Ref. 40003040, Fonds de la Recherche Scientifique – FNRS (Francia) | Ref. 40008129, Universidade de Vigo/CISUG
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Maximum in density of electrolyte solutions: Learning about ion-water interactions and testing the Madrid-2019 force field

  • Sedano, L.F.
  • Blazquez, S.
  • Noya, Eva G.
  • Vega, C.
  • Troncoso, J.
14 pags., 12 figs., 8 tabs. -- Dedicate this paper to the memory of C. Austen Angell, In this work, we studied the effect of Li+, Na+, K+, Mg2+, and Ca2+ chlorides and sulfates on the temperature of maximum density (TMD) of aqueous solutions at room pressure. Experiments at 1 molal salt concentration were carried out to determine the TMD of these solutions. We also performed molecular dynamics simulations to estimate the TMD at 1 and 2 m with the Madrid-2019 force field, which uses the TIP4P/2005 water model and scaled charges for the ions, finding an excellent agreement between experiment and simulation. All the salts studied in this work shift the TMD of the solution to lower temperatures and flatten the density vs temperature curves (when compared to pure water) with increasing salt concentration. The shift in the TMD depends strongly on the nature of the electrolyte. In order to explore this dependence, we have evaluated the contribution of each ion to the shift in the TMD concluding that Na+, Ca2+, and SO4 2- seem to induce the largest changes among the studied ions. The volume of the system has been analyzed for salts with the same anion and different cations. These curves provide insight into the effect of different ions upon the structure of water. We claim that the TMD of electrolyte solutions entails interesting physics regarding ion-water and water-water interactions and should, therefore, be considered as a test property when developing force fields for electrolytes. This matter has been rather unnoticed for almost a century now and we believe it is time to revisit it., This project has been funded by Grant Nos. PID2019-105898GB-C21 and PID2020-115722GB-C22 of the Ministry of Science, Innovation and Universities. E.G.N. acknowledges Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) (Grant No. PID2020-115722GB-C21), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simulation and theoretical analysis of the origin of the temperature of maximum density of water

  • González-Salgado, D.
  • Noya, Eva G.
  • Lomba, Enrique
10 pags., 8 figs., The presence of a maximum in density is one of the well-known anomalies of water. This maximum is located at 4°C at room pressure and it moves to lower temperatures as pressure increases. In this work, we attempt to provide a quantitative explanation of the existence of the temperature of maximum density, T, and its dependence on pressure, using a description in terms of low and high density water states. To that aim, we analyzed NpT molecular dynamics trajectories of TIP4P/2005 liquid water from -1800 bar to 1000 bar, and from 238.15 K to 328.15 K. We computed the mole fractions of the low and high density water states and their partial molar volumes. We found that the temperature dependence of both quantities plays a fundamental role in the existence of the T. On the other hand, only the variation with pressure of the mole fractions of the low and high density water is essential to explain the T pressure dependence. Additionally, we have also performed an equivalent analysis using the parameterization of the two-state thermodynamic model proposed by Biddle et al. [J. Chem. Phys. 146, 034502 (2017)] obtaining similar conclusions., Authors want to thank CESGA (Galician Center of Supercomputing) for performing our calculations in its computer facilities and the finan- cial support from the Spanish Ministry of Science and Innovation, under grant no. PID2020-115722GB-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The increment of the temperature of maximum density of water by addition of small amounts of tert -butanol: Experimental data and microscopic description revisited

  • González-Salgado, D.
  • Troncoso, J.
  • Lomba, Enrique
12 pags., 10 figs., 2 tabs., The temperature of maximum density, TMD, of aqueous solutions of tert-butanol has been experimentally determined in the pressure range of 0-300 bars and up to 0.025 tert-butanol mole fraction. At atmospheric pressure, this quantity increases for low alcohol mole fractions, reaches a maximum at intermediate concentrations, and then quickly falls. The new experimental results are basically in agreement with previous data in the literature by Wada and Umeda [G. Wada and S. Umeda, Bull. Chem. Soc. Jpn. 35, 646 (1962)], except at very low mole fractions, where these authors reported a stronger density anomaly. Our measurements also confirm the known effect of pressure, p, on the variation in the temperature of maximum density with respect to that of pure water, ΔTMD: this quantity increases with p over the whole composition range. In addition, molecular dynamics simulations were performed between 0 and 2000 bars and from 238 to 328 K using a recently proposed model for the tert-butanol/water system. It has been found that our model reproduces qualitatively the experimental behavior of the ΔTMD, but for pressures above 1000 bars. A detailed structural analysis showed that the addition of tert-butanol promotes the low density water structure, and this promotion is somewhat hampered as the temperature increases at high pressure (ΔTMD > 0) and mostly independent of temperature at low pressures (ΔTMD < 0). Our analysis shows that the ultimate factor determining changes in the TMD is the temperature dependence of the low density water structure enhancement. We have also carried out a local structure analysis in which in addition to solid-like structures, low density liquid water ones have also been considered., The authors acknowledge CESGA (Galician Center of Supercomputing) for providing access to its computer facilities. Financial support from the Spanish Ministry of Science and Innovation under Grant No. PID2020-115722GB-C22 is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Liquid-Liquid Criticality in TIP4P/2005 and Three-State Models of Water

  • Cerdeiriña, Claudio A.
  • González-Salgado, Diego
  • Troncoso, Jacobo
9 pags., 7 figs. -- Published as part of The Journal of Physical Chemistry virtual special issue “Pablo G. Debenedetti Festschrift”, Molecular dynamics simulations leading to the isothermal compressibility, the isobaric thermal expansivity, and the isobaric heat capacity of TIP4P/2005 water are found to be consistent with the coordinates of its second, liquid-liquid critical point reported recently by Debenedetti et al. [ Science 2020, 369, 289-292]. In accord with the theory of critical phenomena, we encounter that the rise in the magnitude of these response functions as temperature is lowered is especially marked along the critical isochore. Furthermore, response-function ratios provide a test for thermodynamic consistency at the critical point and manifest nonuniversal features sharply distinguishing liquid-liquid from standard gas-liquid criticality. The whole pattern of behavior revealed by simulations is qualitatively the same as the one of a three-state Ising model of water exhibiting a low-temperature liquid-liquid critical point. Exact solutions for the two-state components of such a three-state model are also provided., Support from the Spanish Ministry of Science and Innovation under grant no. PID2020-115722GB-C22 is greatly acknowledged. We also appreciate funding for Open Access charge by Universidade de Vigo/CISUG, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physics-based tissue simulator to model multicellular systems: A study of liver regeneration and hepatocellular carcinoma recurrence

  • Luque, Luciana Melina
  • Carlevaro, Carlos Manuel
  • Llamoza Torres, Camilo Julio
  • Lomba, Enrique
28 pags., 11 figs. -- 3 videos: https://youtu.be/7URQweHJ6Tk / ttps://doi.org/10.1371/journal.pcbi.1010920.s002 ; https://youtu.be/xFtj6ZjrsKk. / https://doi.org/10.1371/journal.pcbi.1010920.s003 ; https://youtu.be/znVfIxt_Gno. / https://doi.org/10.1371/journal.pcbi.1010920.s004, We present a multiagent-based model that captures the interactions between different types of cells with their microenvironment, and enables the analysis of the emergent global behavior during tissue regeneration and tumor development. Using this model, we are able to reproduce the temporal dynamics of regular healthy cells and cancer cells, as well as the evolution of their three-dimensional spatial distributions. By tuning the system with the characteristics of the individual patients, our model reproduces a variety of spatial patterns of tissue regeneration and tumor growth, resembling those found in clinical imaging or biopsies. In order to calibrate and validate our model we study the process of liver regeneration after surgical hepatectomy in different degrees. In the clinical context, our model is able to predict the recurrence of a hepatocellular carcinoma after a 70% partial hepatectomy. The outcomes of our simulations are in agreement with experimental and clinical observations. By fitting the model parameters to specific patient factors, it might well become a useful platform for hypotheses testing in treatments protocols., This work was supported by the European Union Horizon 2020 Research and Innovation Staff Exchange programme under the Marie Sklodowska-Curie grant agreement No 734276, which funded both the stays of E.L. at UNLP and C.M.C. and L.M.L. at IQFR-CSIC. L.M.L. is supported by CONICET postdoctoral fellowship (RESOL-2020-134-APN-DIR#CONICET). E.L. also acknowledges funding from the Agencia Estatal de Investigacio´n under grant no. PID2020-115722GBC22. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The temperature of maximum density of diluted aqueous solutions of non-polar solutes: A molecular simulation study using TIP4P/2005 water and LJ point solutes

  • González-Salgado, D.
  • Noya, Eva G.
  • Lomba, Enrique
10 pags., 9 figs., 1 tab., The effect of non polar solutes on the temperature of maximum density of water, TMD, is analyzed in detail by means of molecular simulations over an ample pressure interval ranging from negative to very high pressures. Non polar solutes are represented by single Lennard-Jones (LJ) sites, whose non-polar character is tuned with the width and depth of the Lennard-Jones water-solute potential parameters. Our analysis is focused on the behavior of the partial molar volume of the solute at infinite solution, whose thermal dependence is correlated with changes in the TMD. We find that for pressures below −200 bar all possible LJ water-solute potential parameters decrease the TMD, i.e. the solute acts as a “structure breaker”. At higher pressures, it is always possible to find a range of LJ parameters which induce an increase of the TMD, whose magnitude rises gradually with pressure. Our results are consistent with previous simulations of non polar gases in solution and with theoretical studies in the case of small LJ centers. It will be shown that the partial molar volume of an ideal gas at infinite dilution can provide information concerning the existence and size of the LJ parameter space that induces TMD increases for a given water model. Finally, we analyze the changes in the TMD in terms of the competition between low density and high density water states. We find that the temperature dependence of the variation of the low density water mole fraction with the addition of LJ solutes seems to be at the source of the changes in the TMD., Authors want to thank CESGA (Galician Center of Supercomputing) for the access to their computer facilities and acknowledge the financial support from the grants no. PID2020-115722GB-C22 and PID2020-115722GB-C21 funded by MCIN/AEI/10.13039/-501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In silico study of heterogeneous tumour-derived organoid response to CAR T-cell therapy

  • Luque, Luciana Melina
  • Carlevaro, Carlos Manuel
  • Rodriguez-Lomba, Enrique
  • Lomba, Enrique
16 pags., 6 figs., 1 tab., Chimeric antigen receptor (CAR) T-cell therapy is a promising immunotherapy for treating cancers. This method consists in modifying the patients' T-cells to directly target antigen-presenting cancer cells. One of the barriers to the development of this type of therapies, is target antigen heterogeneity. It is thought that intratumour heterogeneity is one of the leading determinants of therapeutic resistance and treatment failure. While understanding antigen heterogeneity is important for effective therapeutics, a good therapy strategy could enhance the therapy efficiency. In this work we introduce an agent-based model (ABM), built upon a previous ABM, to rationalise the outcomes of different CAR T-cells therapies strategies over heterogeneous tumour-derived organoids. We found that one dose of CAR T-cell therapy should be expected to reduce the tumour size as well as its growth rate, however it may not be enough to completely eliminate it. Moreover, the amount of free CAR T-cells (i.e. CAR T-cells that did not kill any cancer cell) increases as we increase the dosage, and so does the risk of side effects. We tested different strategies to enhance smaller dosages, such as enhancing the CAR T-cells long-term persistence and multiple dosing. For both approaches an appropriate dosimetry strategy is necessary to produce "effective yet safe" therapeutic results. Moreover, an interesting emergent phenomenon results from the simulations, namely the formation of a shield-like structure of cells with low antigen expression. This shield turns out to protect cells with high antigen expression. Finally we tested a multi-antigen recognition therapy to overcome antigen escape and heterogeneity. Our studies suggest that larger dosages can completely eliminate the organoid, however the multi-antigen recognition increases the risk of side effects. Therefore, an appropriate small dosages dosimetry strategy is necessary to improve the outcomes. Based on our results, it is clear that a proper therapeutic strategy could enhance the therapies outcomes. In that direction, our computational approach provides a framework to model treatment combinations in different scenarios and to explore the characteristics of successful and unsuccessful treatments., This work was supported by the European Union Horizon 2020 Research and Innovation Staff Exchange programme under the Marie Skłwodoska-Curie grant agreement No. 734276, which funded both the stays of E.L. at UNLP and C.M.C. and L.M.L. at IBC-CSIC. L.M.L. is supported by CONICET postdoctoral fellowship (RESOL-2020-134-APN-DIR#CONICET). E.L. also acknowledges funding from the Agencia Estatal de Investigación under grant no. PID2020-115722GB-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The variation of the temperature of maximum density of non-polar solutes in water: insights from the pressure change in a constant volume solution process

  • González-Salgado, Diego
  • Troncoso, Jacobo
  • Lomba, Enrique
13 pages, 9 figures, 3 tables, The effects of non-polar solutes on the temperature of maximum density (TMD) of water are revisited by means of a molecular dynamics study of TIP4P/2005 water and two examples of spherically symmetric non-polar solutes modelled by same size single Lennard-Jones sites, with weak and strong solute–water dispersive interactions. We have adopted a two-stage strategy to model the solution process at constant pressure to reduce the analysis to the description of the pressure variation in the solution process at constant volume. To this end, the Reaction Field treatment of the Coulombic forces was used so as to be able to decompose the different molecular components to the virial pressure and their spatial variation in terms of the distance to the solute molecule. In this way, we have been able to separate which factors induce the increase of water’s TMD observed for weakly interacting non-polar solutes and the decrease that occurs when the solute is strongly interacting., Support from the Spanish Ministry of Science and Innovation [grant number PID2020-115722GB-C22] is greatly acknowledged. We also would like to acknowledge the Galicia Supercomputing Center (CESGA) for the access to its computerfacilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the build-up of effective hyperuniformity from large globular colloidal aggregates

  • Díaz-Pozuelo, Antonio
  • González-Salgado, Diego
  • Lomba, Enrique
12 pages, 12 figures, A simple three-dimensional model of a fluid whose constituent particles interact via a short range attractive and long range repulsive potential is used to model the aggregation into large spherical-like clusters made up of hundreds of particles. The model can be thought of as a straightforward rendition of colloid flocculation into large spherical aggregates. We illustrate how temperature and particle density influence the cluster size distribution and affect inter- and intra-cluster dynamics. The system is shown to exhibit two well separated length and time scales, which can be tuned by the balance between repulsive and attractive forces. Interestingly, cluster aggregates at moderate/low temperatures approach a cluster glassy phase, whereas cluster particles retain a local liquid-like structure. These states present a strong suppression of density fluctuations for a significant range of relatively large wavelengths, meeting the criterion of effective disordered hyperuniform materials as far as the intercluster structure is concerned., The authors acknowledge the support from the Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) under Grant Nos. PID2023-151751NB-I00 and PID2020115722GB-C22. We also would like to acknowledge the Galicia Supercomputing Center (CESGA) for the access to their computer facilities., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Dressing a nonpolarizableforce field for OH− in TIP4P/2005 aqueous solutions with corrected hirshfeld charge

  • de Lucas, Marcos
  • Blázquez Fernández, Samuel
  • Troncoso, Jacobo
  • Vega De Las Heras, Carlos
  • Gámez Márquez, Francisco De Asis
We present a rigid model for the OH- ion parametrized for binary mixtures with TIP4P/2005-type water molecules. Li+, Na+ and K+ were selected as counterions, hence mimicking the important and widely used solutions of soluble alkaline hydroxides. The optimized atomic charge distributions were obtained by scaling in a factor of 0.85 those derived from the atomic dipole corrected Hirshfeld approach. The agreement between experimental and Molecular Dynamics simulation results is remarkable for a set of properties, namely, the dependence of the density of the solutions on the hydroxide concentration and on temperature, the structure (i.e., positions of the atom-to-atom radial distribution functions and coordination numbers), the viscosity coefficients, the surface tension, or the freezing point depression. The proposed optimized potential parameters for OH- thus enlarge the set of models comprised within the Madrid-2019 force field and widen the potential applicability of the TIP4P/2005 water model in basic environments.