Pasar al contenido principal

AVANZANDO HACIA EL USO DE TECNOLOGIAS ELECTROQUIMICAS MICROBIANAS COMO NEXO ENTRE LOS SISTEMAS ENERGETICOS Y LAS INSTALACIONES DE TRATAMIENTO DE RESIDUOS

PID2020-115948RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE LEÓN

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Microbial electrosynthesis for CO2 conversion and methane production: Influence of electrode geometry on biofilm development

  • Puente, Celia de la
  • Carrillo Peña, Daniela Andrea
  • Pelaz Guerra, Guillermo
  • Morán Palao, Antonio
  • Mateos González, Raúl
[EN] Electromethanogenesis is a process of microbial electrosynthesis (MES) in whichelectroactive microorganisms reduce carbon dioxide (CO2) to produce methane (CH4), using a cathodeas an electron donor. The efficiency of this reaction is greatly determined by the establishment of arobust microbial community on the biocathodes, which eventually affects the global performance of thebioreactor. Moreover, the development of the biofilm depends on several characteristics of theelectrodes, more specifically their material and geometry. Since electrode geometry is a crucialparameter, this study aims at evaluating the sole influence of the electrode shape by installingcarbon-based electrodes with two different constructions (brush and carbon felt) of biocathodes in anelectromethanogenic reactor for CO2capture. The overall performance of the reactors showedcoulombic efficiencies around 100%, with high-quality biogas reaching methane concentrations above90%. The results reveal that the electrode geometry affects the individual biocathode performance, andthe carbon brush showed a bigger contribution to current generation and electrical capacitance,exhibiting higher peak hydrogen production compared to the carbon felt, which could be reflected inhigher CO2capture and methane generation. Both geometries showed a greater proliferation of archaeaover bacteria (between 53 and 85%), which was more significant on the brush than on the carbon felt.Archaea community was dominated byMethanobacteriumin carbon felt electrodes and codominatedwithMethanobrevibacterin brush electrodes, while bacteria analyses showed a very similar communityfor both geometries, SI, Publicación en abierto financiada por el Consorcio de Bibliotecas Universitarias de Castilla y León (BUCLE), con cargo al Programa Operativo 2014ES16RFOP009 FEDER 2014-2020 DE CASTILLA Y LEÓN, Actuación:20007-CL - Apoyo Consorcio BUCLE
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Elucidating the impact of power interruptions on microbial electromethanogenesis

  • Pelaz Guerra, Guillermo
  • González González, Rubén
  • Morán Palao, Antonio
  • Escapa González, Adrián
Preprint. Submitted version, [EN] The need to accommodate power fluctuations intrinsic to high-renewable systems will demand in the future the implementation of large quantities of energy storage capacity. Electromethanogenesis (EM) can potentially absorb the excess of renewable energy and store it as CH4. However, it is still unknown how power fluctuations impact on the performance of EM systems. In this study, power gaps from 24 to 96 h were applied to two 0.5 L EM reactors to assess the effect of power interruptions on current density, methane production and current conversion efficiency. In addition, the cathodes where operated with and without external H2 supplementation during the power-off periods to analyse how power outages affect the two main metabolic stages of the EM (i.e.: the hydrogenic and methanogenic steps). Methane production rates kept around 1000 mL per m2 of electrode and per day regardless of the duration of the power interruptions and of the supplementation of hydrogen. Interestingly, current density increased in the absence of hydrogen (averaged current density during hydrogen supplementation was 0.36 A·m-2 , increasing up to 0.58 A·m-2 without hydrogen). However current was less efficiently used in the production of methane with no hydrogen supplementation. Nevertheless, when the electrical power was restored after the power interruption experiments, performance parameters were similar to those observed before. These results indicate that EM is resilient to power fluctuations, which reinforces the opportunity of using EM as a technology for renewable energy storage., NO
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Electromethanogenesis for the conversion of hydrothermal carbonization exhaust gases into methane

  • Pelaz Guerra, Guillermo
  • González Arias, Judith
  • Mateos González, Raúl
  • Escapa González, Adrián
[EN] Hydrothermal carbonization (HTC) is a biomass conversion process that generates a CO2-rich gaseous phase that is commonly released directly into the atmosphere. Microbial electromethanogeneis (EM) can potentially use this off-gas to convert the residual CO2 into CH4, thus avoiding GHG emissions while adding extra value to the overall bioprocess. In the present work, the HTC gas phase was fed to two mixed-culture biocathodes (replicates) polarized at −1.0V vs. Ag/AgCl. Compared to pure CO2, HTC gas had a marked negative effect on the process, decreasing current density by 61%, while maximum CH₄ yield contracted up to 50%. HTC also had an unequal impact on the cathodic microbial communities, with the methanogenic hydrogenotrophic archaea Methanobacteriaceae experiencing the largest decline. Despite that, the present study demonstrates that HTC can be used in EM as a raw material to produce a biogas with a methane content of up to 70%., SI
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Microbial electromethanogenesis for energy storage: Influence of acidic pH on process performance

  • Pelaz Guerra, Guillermo
  • Carrillo Peña, Daniela Andrea
  • Morán Palao, Antonio
  • Escapa González, Adrián
[EN] Microbial electromethanogenesis (EM) has positioned itself as a promising technology for electrical energy storage using CO2 as a feedstock. However, the selectivity of the final product remains a challenge, being highly dependent of the operating conditions (temperature, pH, conductivity, etc.). This study tries to understand the role that pH plays on the start-up, performance and the structure of microbial communities of an EM system. To that end, two EM reactors were started at pH 7.0 and 5.5 respectively and were subsequently subjected to pH variations between 7.5 and 3.5. The reactor inoculated at pH 5.5 started to produce CH4 earlier than that inoculated at pH 7.0, and the acetogenic activity was gradually displaced by methanogenesis during the start-up period, regardless of the pH. In addition, as the pH of the catholyte became more acidic, the performance improved in terms of methane production, current density and columbic efficiency. Acidic environments – pH around 4.5 – promoted higher methane production due to the selection of Methanobacterium, an acid-tolerant hydrogenotrophic archaea. When pH was set at 3.5, the overall performance declined sharply, probably because it induced unfavourable physiological conditions., SI, Ministerio de Ciencia e Innovación
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Comparison of Activation Methods for 3D-Printed Electrodes for Microbial Electrochemical Technologies

  • Alonso García, Raúl Marcos
  • San Martin Bécares, María Isabel
  • Morán Palao, Antonio
  • Escapa González, Adrián
Supplementary Materials: The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/app12010275/s1, Figure S1. Current density profiles of two successive cycles at the end of a 60 days period that allowed for the development of a stable biofilm; Table S1: Fitted parameters to EC 1 (DMF and acetone electrodes); Table S2: Fitted parameters to EC 2 (control and electrochemical-treated electrodes); Figure S2. Equivalent circuits for abiotic electrode essays’ modellization.1) DMF and acetone 2) Control and electrochemical treatment., [EN] Three-dimensional printing could provide flexibility in the design of a new generation of electrodes to be used in microbial electrochemical technologies (MET). In this work, we demonstrate the feasibility of using polylactic acid (PLA)/graphene—a common 3D-printing material—to build custom bioelectrodes. We also show that a suitable activation procedure is crucial to achieve an acceptable electrochemical performance (plain PLA/graphene bioanodes produce negligible amounts of current). Activation with acetone and dimethylformamide resulted in current densities similar to those typically observed in bioanodes built with more conventional materials (about 5 Am−2). In addition, the electrodes thus activated favored the proliferation of electroactive bacteria., SI, Ministerio de Economía y Competitividad, Ente Regional de la Energía de Castilla y Leon, This research was funded by “Ministerio de Economía y Competitividad (Gobierno de España) grant number: PID2020-115948RB-I00 (MINECO/FEDER, EU) and “Ente Regional de la Energía de Castilla y Leon”, grant number: EREN_2019_L3_ULE.
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Influence of Adding Conductive Materials and Integrating Bio Electrochemical Systems on the Efficiency of Anaerobic Digestion

  • Mur Gorgas, Alberto
  • Garcia Triviño, Antonio Vicente
  • Mateos González, Raúl
  • Escapa González, Adrián
  • Morán Palao, Antonio
[EN] This study explores the impact of incorporating conductive materials and bioelectrochemical systems (BES) on the efficiency of anaerobic digestion (AD) of sewage sludge. The research consists of two phases: biodegradability tests using 3D-printed polylactic acid-based conductive fillers (PLA/Carbon Black and PLA/Graphene) and semi-continuous assays integrating an external BES into the AD process. Results from biodegradability tests indicate that conductive fillers enhance around 50% methane production during the start-up phase, with microbial communities adapting over time to reduce variability in methane yields. Moreover, as the experiment progressed, the methane yields of the digesters with and without fillers became equal. Semi-continuous experiments demonstrate that BES integration improves process stability and methane production by achieving a 5–10% improvement in the amount of methane in the biogas throughout the entire operation, even under high organic loads, by facilitating diverse electron transfer pathways. The challenges of BES operation highlight the need for optimized designs to ensure scalability. Microbial analyses reveal that BES application shifts methanogenic pathways, favouring acetoclastic methanogenesis. Overall, the findings underscore the potential of conductive materials and BES to improve biogas quality and production, contributing to sustainable wastewater management and renewable energy generation., SI, This research was funded by the Ministerio de Ciencia e Innovación (Spain Government), project ref: PID2020-115948RB-I00 funded by MCIN/AEI/10.13039/501100011033. We would also like to thank the staff of the WWTP in León (Spain)., Agencia Estatal de Investigación
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Use of Carbon-Based Additives in Bio-Electrochemically Assisted Anaerobic Digestion for Cheese Whey Valorisation

  • Carrillo Peña, Daniela Andrea
  • Mateos González, Raúl
  • Morán Palao, Antonio
  • Escapa González, Adrián
[EN] This study explores the possibility of utilising electrochemically assisted anaerobic digestion supplemented with carbon-based materials to stimulate methanogenesis. Two different carbonaceous materials—commercial activated carbon (AC), and pyrolysed argan (PA, derived from argan shells)—were employed as supplements, with cheese whey (CW) being used as the substrate. Methane production slightly increased in the electrochemically assisted digesters, potentially translating into a 2–4% increase in the output of industrial digesters. In addition, reactors supplemented with PA also exhibited better production rates (496–508 L·kgVS−1), although there was no observed improvement in the quantity of biogas at the end of the biodegradability experiment. In contrast, when commercial AC was used as the supplement, the start-up phase was accelerated (5 days), although methane productivity decreased (273–352 L·kgVS−1). These observations were supported by microbiological analyses, demonstrating that the reactors with the poorest performance (those supplemented with AC) experienced the most significant decrease in both archaeal and bacterial populations., SI
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Integration of oxycombustion and microbial electrosynthesis for sustainable energy storage

  • Diego-García, R.
  • Morán, A.
  • Romeo Giménez, L. M.
Power-to-gas technology makes use of surplus electricity by its conversion and storage in the form of a gas. Currently power-to-gas schemes based on biological processes are of great interest. Microbial electrosynthesis (MES) cells are biological systems that produce biogas via microbial action and a supply of electrical energy. The OxyMES scheme proposed is a power-to-gas system that seeks to neutralize the CO2 emissions of a standard industrial process through the hybridization of oxy-fuel combustion and bioelectrochemical processes that produce CH4 (in cathode) and O2 (in anode). This oxygen is used for oxycombustion in an industrial C-fuel boiler. The energy balance analysis yielded a power-to-gas efficiency in the MES cell close to 51%, and the overall performance of the OxyMES integrated system was close to 60% for a cell with a Faradaic efficiency of 80%, CO2-to-CH4 conversion rate of 95%, and ¿Vcell = 1.63 V. With the proper sizing of the CO2, O2, and biogas process tank system, it is possible to achieve 100% autonomy, free from external feedstock supplies. © 2022 Elsevier Ltd