Pasar al contenido principal

DISPOSITIVOS POLIMERICOS FUNCIONALES MEDIANTE PROCESOS A ALTA PRESION PARA APLICACIONES BIOMEDICAS

PID2020-116229RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Screening of the Supercritical Impregnation of Olea europaea Leaves Extract into Filaments of Thermoplastic Polyurethane (TPU) and Polylactic Acid (PLA) Intended for Biomedical Applications

  • Machado, Noelia Daiana
  • Cejudo Bastante, Cristina
  • Goñi, María L.
  • Gañán, Nicolás A.
  • Casas Cardoso, Lourdes
  • Mantell Serrano, Casimiro
The leaves of Olea europaea as agricultural waste represent a convenient source of antioxidants. In combination with supercritical CO2 (scCO(2)), assisted impregnation is an interesting strategy for the preparation of biomedical devices with specific bioactivity. For this purpose, 3D-printable filaments of thermoplastic polyurethane (TPU) and polylactic acid (PLA) were employed for the supercritical impregnation of ethanolic olive leaves extract (OLE) for biomedical application. The extraction of OLE was performed using pressurized liquids. The effect of pressure (100-400 bar), temperature (35-55 degrees C), and the polymer type on the OLE impregnation and the swelling degree were studied including a morphological analysis and the measurement of the final antioxidant activity. All the studied variables as well as their interactions showed significant effects on the OLE loading. Higher temperatures favored the OLE loading while the pressure presented opposite effects at values higher than 250 bar. Thus, the highest OLE loadings were achieved at 250 bar and 55 degrees C for both polymers. However, TPU showed c.a. 4 times higher OLE loading and antioxidant activity in comparison with PLA at the optimal conditions. To the best of our knowledge, this is the first report using TPU for the supercritical impregnation of a natural extract with bioactivity.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Use of Winemaking By-Products for the Functionalization of Polylactic Acid for Biomedical Applications

  • Verano Naranjo, Lidia
  • Cejudo Bastante, Cristina
  • Casas Cardoso, Lourdes
  • Martínez de la Ossa Fernández, Enrique José
  • Mantell Serrano, Casimiro
The addition of naturally active compounds to implantable polymers is an efficient strategy against inflammation issues that might lead to rejection, while promoting controlled re-endothelialization of the tissues. This work proposes the use of winemaking by-products with high active properties of biomedical interest to obtain bioactive PLA by using supercritical technologies. First, two red grape pomace extracts, obtained by high-pressure extraction with supercritical CO2 and cosolvents (either ethanol or water–ethanol), have been studied. Second, two impregnation methods have been studied with both extracts, traditional supercritical CO2-assisted impregnation (SSI) and a novel pressurized soaking method (PSI). The amount of extract impregnated as well as the bioactivity levels achieved—i.e., antioxidant, antimicrobial, and anti-inflammatory properties— have been determined for each extract and impregnation method at different pressure and temperature conditions. Both extracts obtained had good antioxidant, anti-inflammatory, and antibacterial capacities, especially the hydroethanolic one (0.50 ± 0.03 mg TE/g versus 0.24 ± 0.03 mg TE/g, respectively). Regarding impregnated filaments, impregnation loadings depended especially on the extract and P/T conditions, providing up to 8% (extract mass/polymer mass) of impregnation. The antioxidant capacity increased noteworthily by using the ethanolic extract by PSI, with values near 100 µg TE/g PLA.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Supercritical Impregnation of Mango Leaf Extract into PLA 3D-Printed Devices and Evaluation of Their Biocompatibility with Endothelial Cell Cultures

  • Grosso, Pilar
  • Cejudo Bastante, Cristina
  • Sánchez Gomar, Ismael
  • Durán Ruiz, María del Carmen
  • Moreno Luna, Rafael
  • Casas Cardoso, Lourdes
  • Pereyra López, Clara María
  • Mantell Serrano, Casimiro
The addition of natural substances with pharmacoactive properties to polymeric biomedical devices would provide beneficial regarding the assimilation of these endoprostheses when implanted into a patient's body. The added drug would facilitate endothelization by regulating the inflammatory processes that such interventions entail, preventing contamination hazards and favoring the angiogenesis or formation of blood vessels in the tissue. The present work used mango leaf extract (MLE) obtained through pressurized ethanol for this purpose. Polylactic acid (PLA) in the form of filaments or 3D-printed disks was impregnated by means of supercritical technology with MLE for the culture essays. The release kinetics has been studied and the polymer matrices have been examined by scanning electron microscopy (SEM). The impregnated devices were subjected to in vitro culture of colony-forming endothelial cells. The influence of the different impregnation conditions used for the production of the MLE impregnated polymeric devices on the development of the cell culture was determined by fluorescence microscopy. The best results were obtained from the calcein cultures on 35 degrees C MLE impregnated into 3D-printed polymer disks.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

An Attempt to Optimize Supercritical CO2 Polyaniline-Polycaprolactone Foaming Processes to Produce Tissue Engineering Scaffolds

  • Montes Herrera, Antonio
  • Valor López, Diego
  • Delgado, Laura
  • Pereyra López, Clara María
  • Martínez de la Ossa Fernández, Enrique José
Conjugated polymers are biomaterials with high conductivity characteristics because of their molecular composition. However, they are too rigid and brittle for medical applications and therefore need to be combined with non-conductive polymers to overcome or lessen these drawbacks. This work has, consequently, focused on the development of three-dimensional scaffolds where conductive and non-conductive polymers have been produced by combining polycaprolactone (PCL) and polyaniline (PANI) by means of supercritical CO2 foaming techniques. To evaluate their therapeutic potential as implants, a series of experiments have been designed to determine the most influential variables in the production of the three-dimensional scaffolds, including temperature, pressure, polymer ratio and depressurization rate. Internal morphology, porosity, expansion factor, PANI loads, biodegradability, mechanical and electrical properties have been taken as the response variables. The results revealed a strong influence from all the input variables studied, as well as from their interactions. The best operating conditions tested were 70 degrees C, 100 bar, a ratio of 5:1 (PCL:PANI), a depressurization rate of 20 bar/min and a contact time of 1 h., This research was funded by Spanish Ministry of Economy, Industry and Competitiveness: PID2020-116229RB-I00.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Structural Modification of Polymers Functionalized with Mango Leaf Extract by Supercritical Impregnation: Approaching of Further Food and Biomedical Applications

  • Cejudo Bastante, Cristina
  • Verano Naranjo, Lidia
  • Toro-Barrios, Noemí
  • Pereyra López, Clara María
  • Mantell Serrano, Casimiro
  • Casas Cardoso, Lourdes
Identifying new polymers from natural resources that can be effectively functionalized can have a substantial impact on biomedical devices and food preservation fields. Some of these polymers would be made of biodegradable, renewable and compostable materials, and present the kind of porosity required to effectively carry active compounds that confer on them the desired properties for their intended applications. Some natural extracts, such as mango leaf extract, have been proven to have high levels of antioxidant, antimicrobial or anti-inflammatory properties, making them good candidates for controlled-release applications. This work intends to investigate the supercritical impregnation of different types of polymers (ABS, PETG, TPU, PC and PCL) with mango leaf extract. The influence of temperature and pressure on the polymers' structure (swelling and foaming processes) and their different behaviors have been analyzed. Thus, TPU and PC experience minimal structural modifications, while PETG, PCL and ABS, on the other hand, suffer quite significant structural changes. TPU and PETG were selected as the representative polymers for each one of these behaviors to delve into mango leaf extract impregnation processes. The bioactive capacity of the extract is present in either impregnated polymer, with 25.7% antioxidant activity by TPU processed at 35 degrees C and 100 bar and 32.9% antioxidant activity by PETG impregnated at 75 degrees C and 400 bar
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Supercritical Impregnation of Mangifera indica Leaves Extracts into Porous Conductive PLGA-PEDOT Scaffolds

  • Valor López, Diego
  • García Casas, Ignacio
  • Montes Herrera, Antonio
  • Danese, E.
  • Pereyra López, Clara María
  • Martínez de la Ossa Fernández, Enrique José
Plant leaves, such as those from Mangifera indica, represent a potential utilization of waste due to their richness in bioactive compounds. Supercritical CO2 allows these compounds to be incorporated into various matrices by impregnation. Combined with its ability to generate polymeric scaffolds, it represents an attractive strategy for the production of biomedical devices. For this purpose, conjugated polymeric scaffolds of biodegradable PLGA (poly(lactic-co-glycolic acid)) and PEDOT:PSS (poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)), generated in situ by foaming, were employed for the supercritical impregnation of ethanolic mango leaves extract (MLE) in tissue engineering as a potential application. The extraction of MLE was performed by Enhanced Solvent Extraction. The effects of pressure (120–300 bar), temperature (35–55 °C), and depressurization rate (1–50 bar/min) on the physical/conductive properties and the impregnation of MLE were studied. The scaffolds have been characterized by liquid displacement, scanning electron microscope, resistance to conductivity techniques, measurements of impregnated load, antioxidant capacity and antimicrobial activity. Porosity values ranging 9–46% and conductivity values between 10−4–10−5 S/cm were obtained. High pressures, low temperatures and rapid depressurization favored the impregnation of bioactive compounds. Scaffolds with remarkable antioxidant activity were obtained (75.2–87.3% oxidation inhibition), demonstrating the ability to inhibit S. aureus bacterial growth (60.1 to 71.4%)., Ministerio de Ciencia e Innovación (España) Universidad de Cádiz (España), 16 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Pro-Angiogenic Effects of Natural Antioxidants Extracted from Mango Leaf, Olive Leaf and Red Grape Pomace over Endothelial Colony-Forming Cells

  • Sánchez Gomar, Ismael
  • Benítez Camacho, Josefa
  • Cejudo Bastante, Cristina
  • Casas Cardoso, Lourdes
  • Moreno Luna, Rafael
  • Mantell Serrano, Casimiro
  • Durán Ruiz, María del Carmen
Cardiovascular diseases remain the leading cause of death worldwide, mainly triggered by the formation of atherosclerotic plaques that reduce blood flow. Angiogenic cell therapy based on endothelial colony forming cells (ECFCs) constitutes a promising alternative to promote vascular revascularization; however, under the oxidative environment that prevails in ischemic areas, these cells become impaired. Thus, it is necessary to investigate strategies to enhance their regenerative properties. Antioxidant substances, such as polyphenols, have been shown to be useful for this purpose. In the current study we evaluated the potential of mango leaves, olive leaves and red grape pomace extracts, rich in polyphenols, to promote ECFC reparative effects. For this, aqueous and ethanolic extracts of the aforementioned raw materials were obtained by pressurized liquid extraction (PLE). After evaluating the polyphenol content and the antioxidant activity, in vitro assays were carried out, and we found that ethanolic extracts at low concentrations improved angiogenic capacities of ECFCs and reduced proliferation, apoptosis, and the inflammatory response of these cells. Overall, mango leaves ethanolic extract provided the most promising results, but all three extracts ameliorated the functionality of ECFCs.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Generation of Highly Antioxidant Submicron Particles from Myrtus communis Leaf Extract by Supercritical Antisolvent Extraction Process,

  • Valor López, Diego
  • Montes Herrera, Antonio
  • Calderón Domínguez, María
  • Aghziel, Inass
  • Sánchez Gomar, Ismael
  • Alcalá, Martín
  • Durán Ruiz, María del Carmen
  • Pereyra López, Clara María
Se han producido partículas submicrónicas a partir de un extracto etanólico de hojas de myrthus communnis utilizando la tecnología del dióxido de carbono supercrítico, en lo sucesivo denominada extracción antisolvente supercrítica (SAE). Se ha investigado la influencia de la presión (9-20 MPa), la temperatura (308 y 328 K) y la velocidad de inyección (3 y 8 ml/min) en la precipitación de las partículas y se ha confirmado que los aumentos de presión y temperatura conducían a partículas de menor tamaño. Las partículas obtenidas tenían una forma casi esférica con tamaños comprendidos entre 0,42 y 1,32 µm. Además, se evaluó la bioactividad de las partículas generadas y se midieron grandes contenidos de compuestos fenólicos con una elevada actividad antioxidante. Las partículas también se sometieron a estudios de liberación in vitro. Las partículas de mirto demostraron propiedades citoprotectoras cuando se aplicaron a bajas concentraciones (1 µM) a líneas celulares de macrófagos., Submicron particles have been produced from an ethanolic extract of myrthus communnis leaves using supercritical carbon dioxide technology, hereinafter referred to as Supercritical Antisol-vent Extraction (SAE). The influence of pressure (9–20 MPa), temperature (308 and 328 K) and in-jection rate (3 and 8 ml/min) on the particles precipitation has been investigated and it has been confirmed that increases in pressure and temperature led to smaller particle sizes. The obtained particles had a quasi-spherical shape with sizes ranging from 0.42 to 1.32 µm. Moreover, the bioactivity of the generated particles was assessed and large contents of phenolic compounds with a high antioxidant activity were measured. The particles were also subjected to in vitro release studies. The myrtle particles demonstrated cytoprotective properties when applied at low concentrations (1 µM) to macrophage cell lines.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Supercritical Impregnation of Olive Leaf Extract in Poly(L-lactic acid-co-caprolactone) Filaments: An Environmentally Friendly Approach to Obtaining Active Biomedical Materials

  • Montes Lobato, Juan Ramón
  • Machado, Noelia Daiana
  • Cejudo Bastante, Cristina
  • Mantell Serrano, Casimiro
  • Casas Cardoso, Lourdes
The valorization of by-products in the olive sector has increasingly become the focus of business and research in the context of biorefineries. This work evaluates the recovery of bioactive compounds from olive leaves and their subsequent incorporation into poly(L-lactic- acid-co-caprolactone) (PLCL) filaments through supercritical impregnation. Obtaining an olive leaf extract (OLE) using enhanced solvent extraction at a high pressure (ESE with CO2/ethanol 1:1 v/v) resulted in higher yields and concentrations of bioactives with high antioxidant and anti-inflammatory activity. No significant differences were found between the extracts obtained with different water regimes (irrigated and dry land). The supercritical impregnation of PLCL filaments showed that a low depressurization rate is essential to avoid material deformation, while the impregnation pressure and temperature influenced the OLE loading and antioxidant activity of the filaments. In vitro release studies showed the prolonged release of active compounds over 90 days, and the kinetics best fit the Korsmeyer–Peppas model, suggesting a diffusion mechanism. These results validate supercritical impregnation as a promising strategy for the development of OLE-active PLCL filaments with potential for biomedical applications requiring sustained therapeutic release.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Development of Porous Polyvinyl Acetate/Polypyrrole/Gallic Acid Scaffolds Using Supercritical CO2 as Tissue Regenerative Agents

  • Valor López, Diego
  • Montes Herrera, Antonio
  • Cózar Almagro, Antonio
  • Martínez de la Ossa Fernández, Enrique José
Scaffolds are advanced devices employed in tissue engineering, as they are intended to mimic the characteristics of extracellular matrices. In this respect, conjugated materials are gaining relevance in the manufacturing of the foams used for therapeutic scaffolds, since they can provide certain properties that are missing in the other polymers used to form the scaffolds. This work has, therefore, focused on the development of functional scaffolds formed by conjugated-non-conjugated polymers such as polyvinyl acetate and polypyrrole, impregnated with gallic acid as the model drug and produced by means of a supercritical CO2 foaming/impregnation process. The effects from a series of parameters such as pressure, temperature, depressurization rate, and contact time of the scaffold production process have been determined. The impregnated foams have been characterized according to their morphology, including their porosity and expansion factor, their drug loading and delivering capabilities, and their mechanical and electrical properties. The characterization of the experiments was carried out using scanning electron microscopy, liquid displacement, in vitro release, electrochemical impedance spectroscopy, and compression techniques. The results from our tests have revealed a considerable influence of all the input variables studied, as well as relevant interactions between them. Values close to 35% porosity were obtained, with a drug release of up to 10 h with a fast initial release. The best operating conditions were 353 K, 30 MPa, 0.5 MPa/min depressurization rate, and 1 h contact time. By means of the supercritical foaming/impregnation technique, scaffolds with potential in tissue engineering due to their studied properties were obtained., This research was funded by Spanish Ministry of Science and Innovation: PID2020-116229RB-I00.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Formation of PLGA–PEDOT: PSS Conductive Scaffolds by Supercritical Foaming

  • Montes Herrera, Antonio
  • Valor López, Diego
  • Penabad, Yaiza
  • Domínguez de la Vega, Manuel
  • Pereyra López, Clara María
  • Martínez de la Ossa Fernández, Enrique José
The usage of conjugated materials for the fabrication of foams intended to be used as therapeutic scaffolds is gaining relevance these days, as they hold certain properties that are not exhibited by other polymer types that have been regularly used until the present. Hence, this work aims to design a specific supercritical CO2 foaming process that would allow the production of porous polymeric devices with improved conductive properties, which would better simulate matrix extracellular conditions when used as therapeutic scaffolds (PLGA–PEDOT:PSS) systems. The effects of pressure, temperature, and contact time on the expansion factor, porosity, mechanical properties, and conductivity of the foam have been evaluated. The foams have been characterized by scanning electron and atomic force microscopies, liquid displacement, PBS degradation test, compression, and resistance to conductivity techniques. Values close to 40% porosity were obtained, with a uniform distribution of polymers on the surface and in the interior, expansion factors of up to 10 orders, and a wide range of conductivity values (2.2 × 10−7 to 1.0 × 10−5 S/cm) and mechanical properties (0.8 to 13.6 MPa Young’s modulus in compression test). The conductive and porous scaffolds that have been produced by supercritical CO2 in this study show an interesting potential for tissue engineering and for neural or cardiac tissue regeneration purposes due to the fact that electrical conductivity is a crucial factor for proper cell function and tissue development.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

The effects of mango leaf extract during adolescence and adulthood in a rat model of schizophrenia

  • García Partida, José Antonio
  • Torres Sánchez, Sonia
  • MacDowell, Karina S.
  • Fernández Ponce, María Teresa
  • Casas Cardoso, Lourdes
  • Mantell Serrano, Casimiro
  • Soto-Montenegro, María Luisa
  • Romero-Miguel, Diego
  • Lamanna-Rama, Nicolás
  • Leza, Juan Carlos
  • Desco, Manuel
  • Berrocoso Domínguez, Esther María
There is evidence that in schizophrenia, imbalances in inflammatory and oxidative processes occur during pregnancy and in the early postnatal period, generating interest in the potential therapeutic efficacy of anti-inflammatory and antioxidant compounds. Mangiferin is a polyphenolic compound abundant in the leaves of Mangifera indica L. that has robust antioxidant and anti-inflammatory properties, making it a potential candidate for preventive or co-adjuvant therapy in schizophrenia. Hence, this study set-out to evaluate the effect of mango leaf extract (MLE) in a model of schizophrenia based on maternal immune activation, in which Poly I:C (4 mg/kg) is administered intravenously to pregnant rats. Young adult (postnatal day 60-70) or adolescent (postnatal day 35-49) male offspring received MLE (50 mg/kg of mangiferin) daily, and the effects of MLE in adolescence were compared to those of risperidone, assessing behavior, brain magnetic resonance imaging (MRI), and oxidative/inflammatory and antioxidant mediators in the adult offspring. MLE treatment in adulthood reversed the deficit in prepulse inhibition (PPI) but it failed to attenuate the sensitivity to amphetamine and the deficit in novel object recognition (NOR) induced. By contrast, adolescent MLE treatment prevented the sensorimotor gating deficit in the PPI test, producing an effect similar to that of risperidone. This MLE treatment also produced a reduction in grooming behavior, but it had no effect on anxiety or novel object recognition memory. MRI studies revealed that adolescent MLE administration partially counteracted the cortical shrinkage, and cerebellum and ventricle enlargement. In addition, MLE administration in adolescence reduced iNOS mediated inflammatory activation and it promoted the expression of biomarkers of compensatory antioxidant activity in the prefrontal cortex and hippocampus, as witnessed through the reduction of Keap1 and the accumulation of NRF2 and HO1. Together, these findings suggest that MLE might be an alternative therapeutic or preventive add-on strategy to improve the clinical expression of schizophrenia in adulthood, while also modifying the time course of this disease at earlier stages in populations at high-risk.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Extraction of Bioactive Compounds from Prestonia mollis Leaves and Their Impregnation into Polylactic Acid Using High-Pressure Technologies: Potential for Biomedical Application

  • Burgos Briones, Gabriel Alfonso
  • Verano Naranjo, Lidia
  • Cejudo Bastante, Cristina
  • Dueñas-Rivadeneira, A.A.
  • Mantell Serrano, Casimiro
  • Casas Cardoso, Lourdes
Enhanced solvent extraction (ESE) and pressurized liquid extraction (PLE) have been used for the first time to obtain antioxidant compounds from Prestonia mollis leaves. The effects of pressure (100–250 bar), temperature (55–75 ◦C) and the composition of the extraction solvent (ethanol, water and hydroalcoholic mixtures) were evaluated according to multilevel factorial designs. PLE provided the largest extraction yields compared to ESE, as well as a greater impact of the operating conditions studied. The highest total phenolic content was obtained when using a hydroalcoholic mixture (CO2/ethanol/water 50/25/25) through ESE at 100 bar and 75 ◦C. The antioxidant capacity of this extract is related to higher concentration levels of the identified flavonoids: Quercetin 3-O-xylosylrutinoside, Kaempferol 3-(2G-apiosylrobinobioside) and Kaempferol 40 -glucoside 7-rhamnoside. This extract was tested for the supercritical impregnation of polylactic acid (PLA), which is a polymer widely used in the biomedical industry. The influence of pressure (100–400 bar), temperature (35–55 ◦C), amount of extract (3–6 mL) and impregnation time (1–2 h) have been evaluated. The best results were obtained by impregnating 3 mL of extract at 100 bar and 55 ◦C for 2 h, achieving 10% inhibition with DPPH methods. The extract presented a potentially suitable impregnation of PLA for biomedical applications., 21 páginas