Pasar al contenido principal

VALORIZACION DE LOS RESIDUOS GENERADOS EN EL PROCESO DE ELIMINACION DE RADIONUCLEIDOS NATURALES EN LIXIVIADOS DE FOSFOYESO

PID2020-116461RA-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Iron recovery from water clarification sludge as ferric chloride

  • Ramírez-Perez, Juan Antonio
  • Soto Cruz, Francisco Javier
  • Gázquez González, Manuel Jesús
  • Pérez-Moreno, Silvia María
  • Bolívar, Juan Pedro
The circular economy (CE) promotes strategies aimed at waste minimization, treatment, and resource recovery, integrating industrial development with environmental and socioeconomic priorities. In this context, the present study investigates the recovery of iron from an oil refinery sludge generated during the water clarification stage of a steam production plant. This residue exhibits a high iron content (37 wt.%), highlighting its potential as a secondary raw material and alternative iron source. Iron recovery was carried out by hydrochloric acid (HCl) leaching under different operating conditions, including HCl concentration, reaction time, temperature, and solid/liquid ratio (S/L). These parameters were investigated to optimize iron dissolution and obtain ferric chloride, a coagulant widely used in water treatment processes. Optimal leaching conditions (37 wt.% HCl, room temperature, 24 h of agitation, S/L = 1/3.5) produced leachates containing 13.4 wt.% Fe, a value comparable to that of commercial ferric chloride solutions (≈ 14 wt.%). The recovered ferric chloride was subsequently evaluated as a coagulant in three types of water (irrigation, tap, and distilled water). Removal efficiencies of up to 98.7% for Fe, 95.2% for Cr, 99.8% for Zn, 82.4% for Cu, and 82.6% for As were achieved. These efficiencies are comparable to or approaching those obtained using a commercial reagent. The results demonstrate the technical feasibility of valorizing oil refinery sludge into a marketable coagulant, providing environmental benefits while supporting circular economy principles., Spanish State Research Agency through the project “Diagnosis and proposals for the environmental re covery of areas impacted by industrial and mining activities: Implications for the Huelva estuary (RESTOREHU)” (Ref. TED2021-130361B-I00). tional support was provided by grants PID2020-116461RB-C21 and PID2020-116461RA-C22, financed by MICIU/AEI/10.13039/ 501100011033. Another additional collaboration was the University of Huelva, funded by the Regional Government of Andalusia (REF.: EPIT1432023). “Behaviour of natural radionuclides under acid mine drainage conditions.”). Also, it was funded by the Nuclear Safety Council (CSN) “Radon exhalation from building materials; Radiological impact and corrective measures (EXRADON)” (PR-047–2021), by grant PID2020- 116461RB-C21 (RAD-REMOVE). Finally, it collaborated the University of Cadiz Ref: FEDER-UCA-2024-A2-09 "Valorization of resources tained in inorganic waste generated by the TiO₂ industry to promote the transition towards a circular economy".
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A new methodology based on TRU resin to measure U-, Th-isotopes and 210Po by alpha-particle spectrometry

  • Gázquez González, Manuel Jesús
  • Paz Gómez, Daniela Carolina
  • Alonso del Rosario, José Juan
  • Pérez-Moreno, Silvia María
  • Ramos Lerate, Inmaculada Concepción
  • Casas Ruiz, Melquiades
  • Bolívar, Juan Pedro
This report presents a new methodology to isolate and measure 210Po, as well as uranium and thorium isotopes. This new methodology reduces the standard time of operation, the minimum amount of chemical reagents and the quantity of resin used in comparison with other standard and well-established procedures for alpha spec- trometry. Thus, the amount of chemicals reagent was lower than the amount used in other standard radio- chemical processes: only 6 mL of 1 M HCl was used for the thorium elution, and 2 mL of H2O and 1 mL of Ammonium Oxalate (0.05 M) (3 mL in total) for the uranium elution. Likewise, many samples of various ac- tivities and materials (liquids and solids) were used to validate the method.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Eco-Friendly Pavements Manufactured from Mixed Recycled Aggregates Obtained from Construction and Demolition Waste: An Industrial-Scale Validation

  • Contreras-Llanes, M.
  • Gázquez González, Manuel Jesús
  • Romero, M.
This study aimed to validate that laboratory-scale results could be commercially replicated when manufacturing marketable precast concrete. Construction and demolition waste (CDW) was separated into two (fine and coarse) recycled aggregates (RAs). Precast paver and kerb units were fabricated by partial or total substitution of natural aggregates (NAs) by RAs. The study involved the comprehensive characterisation of raw materials, including particle size distribution, mineral composition, and elemental composition. Paver blocks and kerbs manufactured with up to 50% RAs showed mechanical resistance (T = 3.7 ± 0.2 and B = 5.3 ± 0.6 MPa, respectively), water absorption between 5.3–5.7%, and abrasion resistance (approximately 20.2 mm), which met the standard requirements (UNE-EN 1340:2004 and UNE-EN 1338:2004). Furthermore, industrial-scale precast pavement units demonstrated strength and durability suitable for heavy traffic areas. A reduction of 13% in cement content could maintain the requirements with a partial RA substitution of 25%, offering economic and environmental benefits. Therefore, it is feasible at an industrial level to replace NAs with RAs, promoting durability and technological properties with a positive environmental impact and considerably reducing CO2 emissions by up to 65%. Overall, pavers with RAs manufactured at the laboratory scale met mechanical standards, and the kerb stones showed improvements in abrasion resistance. On an industrial scale, kerb stones and precast blocks with specific substitutions can meet strength, water absorption, and abrasion requirements, allowing a reduction in cement content., RENSMA Centro para el Desarrollo Tecnológico Industrial (España) Universidad de Huelva (España) Ministerio de Asuntos Económicos y Transformación Digital, Gobierno de España, 21 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Radiological assessment of wastes from copper mining in Iberian Pyrite Belt

  • Ramírez-Perez, Juan Antonio
  • Barba Lobo, Alejandro
  • Gázquez González, Manuel Jesús
  • Bolívar, Juan Pedro
The Iberian Pyrite Belt (IPB), located in SW Spain, is the geographical area where more mining activities related to polymetallic minerals have been developed from around 4000 years before present, being especially intense from the second half of 19th century, generating huge amounts of wastes stored along the basins of the Odiel and Tinto rivers. According to the radiological European Union regulation, and the international one, the polymetallic mining is considered as a NORM (Naturally Occurring Radioactive Material) activity, and therefore, it is necessary to carry out an evaluation of the radiological risks associated with these mining activities. To achieve this objective the waste repositories of several mining areas were sampled trying to obtain the most representative wastes of the study area (roasted pyrite, floating mud, slags, leached pyrite, between others). The activity concentrations of natural radionuclides and multielement composition of the collected samples were measured, and different radiological indexes were calculated (Raeq, Hex, Ic, Fc238U and Fc232Th). The main conclusion of this work has been that all these indexes are below the threshold stablished by regulation to assure an effective dose smaller than 1 mSv per year, and therefore the mining waste deposited in the IPB can be used in valorization processes for building materials without radiological restrictions., Spanish State Agency whose name is “Diagnosis and proposals for the envi ronmental recovery of areas affected by industrial and mining activities; Implications for the Huelva estuary (RESTOREHU), Ref.: TED2021-130361B-I00)”, Grants PID2020-116461RB-C21 and 116461RA-C22) funded by MICIU/AEI/10.13039/501100011033
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Valorization Diagnosis of Roasted Pyrite Ashes Wastes from the Iberian Pyrite Belt

  • Ramírez-Pérez, Juan Antonio
  • Gázquez González, Manuel Jesús
  • Bolívar, Juan Pedro
The Iberian Pyrite Belt (IPB) contains the world’s largest massive sulfide deposit, and, due to extensive mining developed during the last 200 years, large amounts of mining waste have been abandoned in this area, with roasted pyrite ash being the focus of this study. Polymetallic mining is also classified as a NORM (naturally occurring radioactive material) activity, thus the main objective of this work was to develop a radiological and physicochemical characterization of this waste (mineral phases, elemental and radionuclide concentrations) in order to perform a valorization diagnosis of this material. The composition of this waste strongly depends on its origin (mine), and is mainly formed by iron oxides (hematite, Fe₂O₃) and heavy metals and metalloids such as As, Pb, Zn, and Cu, in levels 2–4 orders of magnitude higher than those of undisturbed soils, depending on each particular element. However, the average natural radionuclide levels are similar to those of unperturbed soils (around 30 Bqkg−1 of 238U-series, 50 Bqkg−1 of 232Th, and 70 Bqkg−1 for 40K), thus they are below the limits established by European Union regulations to require radiological control during their future valorization. As the main potential applications of roasted pyrite ash, the valorization diagnosis indicates that it can be used as a source of Fe (FeCl₃ or FeSO₄), or an additive in the manufacturing of cements, pigments, etc.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A Practical Procedure to Determine Natural Radionuclides in Solid Materials from Mining

  • Barba Lobo, Alejandro
  • Gázquez González, Manuel Jesús
  • Bolívar, Juan Pedro
There are many regulations related to the radiological control of NORMs (Naturally Occurring Radioactive Materials) in activities such as mining, industry, etc. Consequently, it is necessary to apply fast and accurate methods to measure the activity concentrations of long-lived natural radionuclides (e.g., U-238, Th-234,Th-232,Th-230,Th-228, Ra-228,Ra-226, Pb-210, Po-210, and K-40) in samples characterized by a wide variety of compositions and densities, such as mining samples (wastes, minerals, and scales). Thus, it is relevant to calculate the radioactive index (RI), which summarizes for all radionuclides the ratio between the activity concentration and its respective threshold activity concentration as established by regulations, in order to classify a material as a NORM. To proceed with the determinations of these radionuclides, two spectrometric techniques based on both alpha-particle and gamma-ray detections should be employed. In the case of gamma-ray spectrometry, it is necessary to correct the full-energy peak efficiency (FEPE) obtained for the calibration sample, s o due to self-attenuation and true coincidence summing (TCS) effects. The correction is especially significant at low gamma emission energies, that is, E-gamma < 150 keV, such as 46 keV (Pb-210) and 63 keV (Th-234). On the other hand, in samples which contain radionuclides that are in secular disequilibrium with others belonging to the same series (U-238 or Th-232 series), like wastes or intermediate products, it is necessary to measure some pure alphaemitters (Th-232, Th-230, Po-210) by employing alpha-particle spectrometry. A practical and general validated procedure based on both alpha and gamma spectrometric techniques and using semiconductor detectors is presented in this study.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Eco-Friendly Pavements Manufactured from Mixed Recycled Aggregates Obtained from Construction and Demolition Waste: An Industrial-Scale Validation

  • Contreras, Manuel
  • Gázquez, Manuel Jesús
  • Romero, Maximina
This study aimed to validate that laboratory-scale results could be commercially replicated when manufacturing marketable precast concrete. Construction and demolition waste (CDW) was separated into two (fine and coarse) recycled aggregates (RAs). Precast paver and kerb units were fabricated by partial or total substitution of natural aggregates (NAs) by RAs. The study involved the comprehensive characterisation of raw materials, including particle size distribution, mineral composition, and elemental composition. Paver blocks and kerbs manufactured with up to 50% RAs showed mechanical resistance (T = 3.7 ± 0.2 and B = 5.3 ± 0.6 MPa, respectively), water absorption between 5.3–5.7%, and abrasion resistance (approximately 20.2 mm), which met the standard requirements (UNE-EN 1340:2004 and UNE-EN 1338:2004). Furthermore, industrial-scale precast pavement units demonstrated strength and durability suitable for heavy traffic areas. A reduction of 13% in cement content could maintain the requirements with a partial RA substitution of 25%, offering economic and environmental benefits. Therefore, it is feasible at an industrial level to replace NAs with RAs, promoting durability and technological properties with a positive environmental impact and considerably reducing CO2 emissions by up to 65%. Overall, pavers with RAs manufactured at the laboratory scale met mechanical standards, and the kerb stones showed improvements in abrasion resistance. On an industrial scale, kerb stones and precast blocks with specific substitutions can meet strength, water absorption, and abrasion requirements, allowing a reduction in cement content., This research was funded by the Centre for the Development of Industrial Technology (CDTI) to the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO), by the project “Eco-efficient concrete urban paving from mixed recycled aggregates obtained from CDW” (Ref.: IDI-20180931) and by the Spanish Ministry of Science, Innovation and Universities’ Research Agency “Valorisation of the wastes coming from the process for removing natural radionuclides in phosphogypsum leachates” (Ref.: PID2020-116461RA-C22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valorisation of a waste derived from the decontamination of phosphogypsum leachate as a clay replacement in ceramics

  • Soto-Cruz, F.J.
  • López-Delgado, Aurora
  • Ramos-Lerate, I.
  • Bolívar, J.P.
  • Gázquez, M.J.
  • Romero, Maximina
Article In Press. This is a PDF of an article that has undergone enhancements after acceptance, such as the addition of a cover page and metadata, and formatting for readability. This version will undergo additional copyediting, typesetting and review before it is published in its final form. As such, this version is no longer the Accepted Manuscript, but it is not yet the definitive Version of Record; we are providing this early version to give early visibility of the article., This study presents the first valorisation of a waste generated from the cleaning process of phosphogypsum leachate (HApW) as a clay substitute in ceramics , contributing to the development of cleaner materials through industrial waste reuse. The waste is mainly composed of hydroxyapatite but contains non-negligible concentrations of heavy metals such as As, Zn, Cu, Ni, and V, and exhibits a 238U activity concentration of approximately 750 Bq·kg−1. Ceramics were prepared with varying clay replacement by HApW (20, 40, 60, and 80 wt%). Two commercial ceramic clays with distinct chemical and mineralogical compositions (referred to as clay A and clay B) were used. The thermal behaviour, sintering responses and the resulting microstructural and mechanical properties were systematically evaluated to determine the suitability of HApW as a sustainable clay substitute. Ceramic compositions were further assessed for porosity, flexural strength, and environmental safety via leaching tests. Results indicate that high HApW compositions exhibit a mineralogy dominated by HApW derived phases, including substituted apatite (Ca5(Na,Mg)(PO4)3) and complex calcium phosphate (Ca9MgNa(PO4)7), formed through thermal decomposition. HApW induces intense sintering and high final shrinkage, and clay would act as a skeleton that moderates this process. The flexural strength of the ceramic compositions ranges from 7 to 47 MPa and decreases linearly with increasing HApW content; however, this behaviour depends not only on total porosity but also on pore size. Microstructural analysis showed that clay A led to mostly amorphous matrices, while clay B produced denser structures with integrated apatite and acicular mullite crystals, enhancing densification and mechanical performance. Environmental assessment showed that heavy metal release remains below regulatory limits and that the radiological impact is negligible (indicative dose < 0.1 mSv·year−1). Compositional evaluation against ISO 13006 ceramic tile requirements showed that formulations 50A and 60A meet the specifications for BIIa indoor floor tiles, whereas 70B and 80B comply with BIb requirements, identifying these compositions as the optimal ranges for practical application. These findings demonstrate the viability of HApW as a sustainable clay replacement in ceramic production within the framework of cleaner material development., This research was funded by Grants PID2020–116461RB-C21 and 116461RA-C22 funded by MICIU/AEI/ 10.13039/501100011033; Research grant UCA/REC44VPCT/2021, by the University of Cádiz. The technical support of Ms. Esther Martín is recognised., Peer reviewed