Pasar al contenido principal

DE LOS BIOCRISTALES A LAS CONCHAS ¿QUE FACTORES CONTROLAN LA ORGANIZACION Y EL CRECIMIENTO A DIFERENTES NIVELES?

PID2020-116660GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE GRANADA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biological light-weight materials: The endoskeletons of cephalopod mollusks

  • Griesshaber, Erika
  • Checa, Antonio G.
  • Salas, Carmen
  • Hoffmann, René
  • Yin, Xiaofei
  • Rupp, U.
  • Schmahl, Wolfgang W.
Structural biological hard tissues fulfill diverse tasks: protection, defence, locomotion, structural support, reinforcement, buoyancy. The cephalopod mollusk Spirula spirula has a planspiral, endogastrically coiled, chambered, endoskeleton consisting of the main elements: shell-wall, septum, adapical-ridge, siphuncular-tube. The cephalopod mollusk Sepia officinalis has an oval, flattened, layered-cellular endoskeleton, formed of the main elements: dorsal-shield, wall/pillar, septum, siphuncular-zone. Both endoskeletons are light-weight buoyancy devices that enable transit through marine environments: vertical (S. spirula), horizontal (S. officinalis). Each skeletal element of the phragmocones has a specific morphology, component structure and organization. The conjunction of the different structural and compositional characteristics renders the evolved nature of the endoskeletons and facilitates for Spirula frequent migration from deep to shallow water and for Sepia coverage over large horizontal distances, without damage of the buoyancy device. Based on Electron-Backscatter-Diffraction (EBSD) measurements and TEM, FE-SEM, laser-confocal-microscopy imaging we highlight for each skeletal element of the endoskeleton its specific mineral/biopolymer hybrid nature and constituent arrangement. We demonstrate that a variety of crystal morphologies and biopolymer assemblies are needed for enabling the endoskeleton to act as a buoyancy device. We show that all organic components of the endoskeletons have the structure of cholesteric-liquid-crystals and indicate which feature of the skeletal element yields the necessary mechanical property to enable the endoskeleton to fulfill its function. We juxtapose structural, microstructural, texture characteristics and benefits of coiled and planar endoskeletons and discuss how morphometry tunes structural biomaterial function. Both mollusks use their endoskeleton for buoyancy regulation, live and move, however, in distinct marine environments., AGC and CS were funded by projects PID2020-116660 GB-I00 of the Spanish Ministerio de Ciencia e Innovación, and B-RNM-265-UGR18 and P20-00207 of the Junta de Andalucía. AGC also acknowledges the Unidad Científica de Excelencia UCE-PP2016-05 of the University of Granada, and the Research Group RNM363 of the Junta de Andalucía.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence for helical microstructure of aragonite fibers in pteropod shells

  • Checa, Antonio G.
  • Pimentel, Carlos
  • Berent, K.
  • Ramos-Silva, Paula
  • Rodríguez-Navarro, Alejandro B.
  • Cartwright, Julyan H. E.
  • Sainz-Díaz, C. Ignacio
Abstract: Planktonic gastropods of the suborder Euthecosomata (order Pteropoda) secrete a unique microstructure made of tightly interlocked, space-filling helically coiled aragonite fibers. This material has a high degree of ordering because all fibers are in phase at a given growth plane. The recognition of the helical nature from mere scanning electron micrographs is somewhat uncertain. In addition, three-dimensional (3D) reconstructions of individual helices are hindered by the small dimensions of fibers, and the virtual absence of intervening organic interphases. Here, we (1) reexamine the morphological characteristics of the fibers in fracture and find them compatible with a helical model, (2) provide direct evidence of the helical mode of coiling in the form of anaglyphs, and (3) develop a 3D model, which is fully consistent with the patterns observed in fractures and polished sections. Proposals based on motifs different from helices are not congruent with the observations. Graphical abstract: [Figure not available: see fulltext.] Impact statement: Some planktonic gastropods of the order Pteropoda secrete a unique microstructure that was originally described as made of tightly interlocked helically coiled continuous aragonite fibers. Despite this material having been described 50 years ago, there is still debate as to the helical design of such fibers. We provide additional unambiguous evidence that fibers describe true helical trajectories during growth. Establishing their true nature is essential in order to know the spectrum of calcified biomaterials produced by molluscs. This is also a prerequisite for future biomimetic studies aiming at producing bioinspired highly functional materials., Funding for open access charge: Universidad de Granada/CBUA. This research was funded by projects CGL2017-85118-P (A.G.C.), PID2020-116660 GB-I00 (A.G.C., K.B., A.B.R.-N.) (Spanish Ministerio de Ciencia e Innovación), and B-RNM-265-UGR18 (A.G.C., A.B.R.-N.) (Junta de Andalucía), KB PPI/APM/2018/1/00049/U/001 (A.C.G., K.B.) (Polish National Agency for Academic Exchange), the Unidad Científica de Excelencia UCE-PP2016-05 (A.G.C., A.B.R.-N.) (University of Granada), PCIN-2017–098 (C.I.S.-D) (Junta de Andalucía), and the Research Group RNM363 (A.G.C., C.P., J.H.E.C., C.I.S.D.) (Junta de Andalucía), and European COST Action CA17120 (C.I.S.-D.). C.P. acknowledges Juan de la Cierva-Formación postdoctoral contract (ref. FJC2018-035820-I) from the Spanish Ministry of Science. P.R.-S. was supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 844345 [project EPIC] and the Malacological Society of London Travel Award.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microstructure and Crystallographic Characteristics of Stenolaemate Bryozoans (Phylum Bryozoa and Class Stenolaemata)

  • Grenier, Christian
  • Griesshaber, Erika
  • Schmahl, Wolfgang W.
  • Checa, Antonio G.
The bryozoan Cass Stenolaemata is currently represented by the Order Cyclostomata. They produce skeletons made exclusively of calcite crystals assembled into different microstructures. Despite extensive previous research, no appropriate crystallographic techniques have been applied to decipher their crystallographic organization. We present an in-depth crystallographic study of the microstructures of three extant species (Fasciculipora ramosa, Hornera robusta, and Cinctipora elegans) using scanning electron microscopy and associated techniques (energy-dispersive spectroscopy and electron backscatter diffraction), together with atomic force microscopy and micro-computed tomography. We differentiate two microstructures, foliated and tabular calcite, and establish consistent models of their crystallography. Foliated calcite of F. ramosa and C. elegans consists of co-oriented laths arranged with their c-axes parallel to their elongation axis and to their main surfaces, and one a*-axis perpendicular to the latter (sheet texture). Tabular calcite of H. robusta consists of polygonal tablets with the c-axis as fiber axis (axial texture), perpendicular to the tablet surface. The foliated calcite of bryozoans is homeomorph to that of bivalves but has a significantly different crystallography. The tabular calcite of bryozoans lacks the spiral morphology of the tablet-shaped calcite of craniiformis brachiopods and has a different orientation of the c-axis with respect to the constituent tablets., Proyectos CGL2017-85118-P y PID2020116660GB-I00 (Ministerio de Ciencia e Innovación); Proyecto B-RNM-265UGR18 (Junta de Andalucía); Grupo de Investigación RNM363 (Consejería de Economía, Innovación, Ciencia y Empleo, Junta de Andalucía); Open Access financiado por la Universidad de Granada y por el Consorcio de Bibliotecas Universitarias de Andalucía (CBUA), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale Analysis of the Structure and Composition of Biogenic Calcite Reveals the Biomineral Growth Pattern

  • Frutos, Marta de
  • Rodríguez-Navarro, Alejandro B.
  • Li, Xiaoyan
  • Checa, Antonio G.
The vast majority of calcium carbonate biocrystals differ from inorganic crystals in that they display a patent nanoroughness consisting of lumps of crystalline material (calcite/aragonite) surrounded by amorphous pellicles. Scanning transmission electron microscopy coupled with electron energy loss spectroscopy (STEM-EELS) was used to map the calcite secreted by a barnacle chemically and structurally with ultrahigh resolution (down to 1 nm). The material is composed of irregular lumps of calcite (up to two hundred nm in diameter) surrounded by relatively continuous cortexes (up to 20 nm thick) of amorphous calcium carbonate (ACC) and/or nanocalcite plus biomolecules, with a surplus of calcium relative to carbonate. We develop a model by which the separation of the crystalline and amorphous phases takes place upon crystallization of the calcite from a precursor ACC. The organic biomolecules are expelled from the crystal lattice and concentrate in the form of pellicles, where they stabilize minor amounts of ACC/nanocalcite. In this way, we change the previously established conception of biomineral structure and growth., This research was funded by projects PID2020-116660GB-I00 of the Spanish Ministerio de Ciencia e Innovación, B-RNM-265-UGR18 and P20-00207 of the Junta de Andalucía, the Unidad Científica de Excelencia UCE-PP2016-05 of the University of Granada (AGC, ABRN), and the Research Group RNM363 of the Junta de Andalucía (AGC). This work has been partly supported by the National Agency for Research under the Program of Future Investment TEMPOS CHROMATEM (Reference No. ANR-10-EQPX-50) and the European Union’s Horizon 2020 Research and Innovation Program (Grant No. 823717, ESTEEM3)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organization and Formation of the Crossed-Foliated Biomineral Microstructure of Limpet Shells

  • Berent, K.
  • Gajewska, Marta
  • Checa, Antonio G.
To construct their shells, molluscs are able to produce a large array of calcified materials including granular, prismatic, lamellar, fibrous, foliated, and plywood-like microstructures. The latter includes an aragonitic (the crossed-lamellar) and a calcitic (the crossed-foliated) variety, whose modes of formation are particularly enigmatic. We studied the crossed-foliated calcitic layers secreted solely by members of the limpet family Patellidae using scanning and transmission electron microscopy and electron backscatter diffraction. From the exterior to the interior, the material becomes progressively organized into commarginal first-order lamellae, with second and third order lamellae dipping in opposite directions in alternating lamellae. At the same time, the crystallographic texture becomes stronger because each set of the first order lamellae develops a particular orientation for the c-axis, while both sets maintain common orientations for one {104} face (parallel to the growth surface) and one a-axis (perpendicular to the planes of the first order lamellae). Each first order lamella shows a progressive migration of its crystallographic axes with growth in order to adapt to the orientation of the set of first order lamellae to which it belongs. To explain the progressive organization of the material, we hypothesize that a secretional zebra pattern, mirrored by the first order lamellae on the shell growth surface, is developed on the shell-secreting mantle surface. Cells belonging to alternating stripes behave differently to determine the growth orientation of the laths composing the first order lamellae. In this way, we provide an explanation as to how plywood-like materials can be fabricated, which is based mainly on the activity of mantle cells., Funding was provided by projects PID2020116660GB-I00, funded by MCIN/AEI/10.13039/501100011033/ (“FEDER Una manera de hacer Europa”), and OPUS 15 no. UMO-2018/29/B/ST8/02200 of the National Science Center of Poland. A.C. also acknowledges the Unidad Científica de Excelencia UCE-PP2016-05 of the University of Granada and the Research Group RNM363 of the Junta de Andalucía. Funding for open access was provided by Universidad de Granada/ Consorcio de Bibliotecas Universitarias de Andalucıá (CBUA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Patterns of crystal organization and calcite twin formation in planktonic, rotaliid, foraminifera shells and spines

  • Lastam, J.
  • Griesshaber, Erika
  • Yin, X.
  • Rupp, U.
  • Sánchez-Almazo, I.
  • Heß, M.
  • Walther, P.
  • Checa, Antonio G.
  • Schmahl, Wolfgang W.
The foraminiferal order Rotaliida represents one third of the extant genera of foraminifers. The shells of these organisms are extensively used to decipher characteristics of marine ecosystems and global climate events. It was shown that shell calcite of benthic Rotaliida is twinned. We extend our previous work on microstructure and texture characterization of benthic Rotaliida and investigate shell calcite organization for planktonic rotaliid species. Based on results gained from electron backscattered diffraction (EBSD) and field emission electron microscopy (FESEM) imaging of chemically etched/fixed shell surfaces we show for the planktonic species Globigerinoides sacculifer, Pulleniatina obliquiloculata, Orbulina universa (belonging to the two main planktonic, the globigerinid and globorotaliid, clades): very extensive 60°-{0 0 1}-twinning of the calcite and describe a new and specific microstructure for the twinned crystals. We address twin and crystal morphology development from nucleation within a biopolymer template (POS) to outermost shell surfaces. We demonstrate that the calcite of the investigated planktonic Rotaliida forms through competitive growth. We complement the structural knowledge gained on the clade 1 and clade 2 species with EBSD results of Globigerinita glutinata and Candeina nitida shells (clade 3 planktonic species). The latter are significantly less twinned and have a different shell calcite microstructure. We demonstrate that the calcite of all rotaliid species is twinned, however, to different degrees. We discuss for the species of the three planktonic clades characteristics of the twinned calcite and of other systematic misorientations. We address the strong functionalization of foraminiferal calcite and indicate how the twinning affects biocalcite material properties., We thank Prof. H. Spero, Coastal and Marine Sciences Institute, University of California at Davis, USA and Dr. A. D. Russell, Department of Earth and Planetary Sciences, University of California at Davis, USA, for the specimens Globigerinoides sacculifer and Pulleniatina obliquiloculata. Very many thanks to Prof. M. Kucera, MARUM – Fachbereich Geowissenschaften Universität Bremen, Germany, for the Globigerinita glutinata and the Candeina nitida shells. We thank Prof. J. Erez, Institute of Earth Sciences, The Hebrew University of Jerusalem, Israel, for the species Ammonia convexa and Operculina ammonoides. We thank Prof. L. de Nooijer, NIOZ Royal Netherlands Institute for Sea Research, The Netherlands, for the Hoeglundina elegans specimen. Very many thanks to Heidemarie Gensler, Biozentrum LMU München and Renate Kunz, Zentrale Einrichtung Elektronenmikroskopie, Universität Ulm, for their help with sample preparation. I.S.-A. and A.G.C. are supported by Project PID2020-116660 GB-I00 of the Spanish Ministerio de Ciencia, Innovación y Universidades.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystallographic control of the fabrication of an extremely sophisticated shell surface microornament in the glass scallop Catillopecten

  • Checa, Antonio G.
  • Salas, Carmen
  • Varela-Feria, Francisco M.
  • Rodríguez-Navarro, Alejandro B.
  • Grenier, Christian
  • Kamenev, Gennady M.
  • Harper, Elizabeth M.
The external surface microornament of the glass scallops Catillopecten natalyae and malyutinae is made by calcitic spiny projections consisting of a stem that later divides into three equally spaced and inclined branches (here called aerials). C. natalyae contains larger and smaller aerials, whereas C. malyutinae only secreted aerials of the second type. A remarkable feature is that aerials within each type are fairly similar in size and shape and highly co-oriented, thus constituting a most sophisticated microornament. We demonstrate that aerials are single crystals whose morphology is strongly controlled by the crystallography, with the stem being parallel to the c-axis of calcite, and the branches extending along the edges of the {104} calcite rhombohedron. They grow epitaxially onto the foliated prisms of the outer shell layer. The co-orientation of the prisms explains that of the aerials. We have developed a model in which every aerial grows within a periostracal pouch. When this pouch reaches the growth margin, the mantle initiates the production of the aerial. Nevertheless, later growth of the aerial is remote, i.e. far from the contact with the mantle. We show how such an extremely sophisticated microornament has a morphology and co-orientation which are determined by crystal growth., We are grateful to John Taylor for drawing the aerials to our attention. GK is very grateful to A. Brandt, and M.V. Malyutina for invitation to join the deep-sea KuramBio and KuramBio II expeditions and to the scientific staff and ship crews of the expeditions. This research was funded by projects CGL2017-85118-P (AGC, CS, FMVF, CG, EMH) and PID2020-116660GB-I00 (AGC, CS, ABRN, FMVF, CG, EMH) of the Spanish Ministerio de Ciencia e Innovación, the Unidad Científica de Excelencia UCE-PP2016-05 of the University of Granada (AGC, ABRN), the Research Group RNM363 of the Junta de Andalucía (AGC, CG), and Grant No. 13.1902.21.001 (Agreement No. 075-15-2020-796) of the Ministry of Science and Higher Education of the Russian Federation (GK).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Form and function of the mantle edge in Protobranchia (Mollusca: Bivalvia)

  • Salas, Carmen
  • Bueno-Pérez, Juan de Dios
  • López-Téllez, Juan Félix
  • Checa, Antonio G.
We analyzed, by optical and transmission electron microscopy, the morphology and function of the mantle edge, including the formation of the periostracum, of ten species of protobranchs. Five species from the order Nuculida, four species from the order Nuculanida and one species from the order Solemyida were studied. A second outer fold, which seems to function as a template for the internal marginal crenulations of the valves, is present in the crenulated species of Nucula. The minute non-crenulated Ennucula aegeensis shows the glandular basal cells displaced toward the periostracal groove, resembling a minute additional fold between the outer and middle folds. Intense secretion of glycocalyx, together with active uptake of particles, have been observed in the inner epithelium of the middle mantle fold and the whole epithelium of the inner mantle fold in all the studied species. Contrary to the rest of the bivalves, all the protobranchs analyzed have two basal cells involved in the formation of the external nanometric pellicle of the periostracum, a character that would support the monophyly of protobranchs. A three-layered pattern is the general rule for the periostracum in protobranchs, like for other bivalves. The presence of pouches of translucent layer inside the tanned dark layer under periostracal folds is characteristic of the species with a folded periostracum; its function is unclear but could give flexibility to the periostracum. The non-nacreous internal shell layer and the presence of translucent pouches under periostracal folds in Sarepta speciosa resemble those found in nuculanids. However, the free periostracum is rather similar to those of N. hanleyi and E. aegeensis, with a continuous vesicular layer. All the latter supports the inclusion of Sarepta in the order Nuculanida but could indicate either a basal lineage or that the translucent vesicular layer is an adaptive trait., This research was funded by the projects CGL2017-85118-P and PID2020-116660GB-I00 of the Spanish Ministry of Economy, Industry and Competitiveness . Funding for open access charge has been provided by the University of Málaga/CBUA .
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Helical microstructures in molluscan biomineralization are a biological example of close packed helices that may form from a colloidal liquid crystal precursor in a twist-bend nematic phase

  • Berent, Katarzyna
  • Cartwright, Julyan H. E.
  • Checa, Antonio G.
  • Pimentel, Carlos
  • Ramos-Silva, Paula
  • Sainz-Díaz, C. Ignacio
We demonstrate that nature has produced a close-packed helical twisted filamentous material in the biomineralization of the mollusk. In liquid crystals, twist-bend nematics have been predicted and observed. We present and analyze evidence that the helical biomineral microstructure of mollusk shells may be formed from such a liquid-crystal precursor., C.P. has received funding from the Spanish Ministry of Science through Juan de la Cierva-Formación-2018 postdoctoral contract Ref. No. FJC2018-035820-I and from the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 101021894 (CARS-CO2). P.R.-S. has received funding from the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 844345 (EPIC). K.B. and A.G.C. were funded by the Polish National Agency for Academic Exchange, Grant No. PPI/APM/2018/1/00049/U/001 and by Grant No. PID2020-116660GB-I00 of the Spanish Ministerio de Ciencia e Innovación. J.H.E.C. and C.I.S.-D. would like to acknowledge the contribution of the COST Action CA17139, Eutopia.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Guinea fowl eggshell structural analysis at different scales reveals how organic matrix induces microstructural shifts that enhance its mechanical properties

  • Rodríguez Navarro, Alejandro B.
  • Domínguez-Gasca, N.
  • Athanasiadou, Anastasia
  • Le Roy, N.
  • González-Segura, Alicia
  • Reznikova, N.
  • Hincke, Maxwell
  • McKee, M. D.
  • Checa, Antonio G.
  • Nys, Y.
  • Gautron, J.
Guinea fowl eggshells have an unusual structural arrangement that is different from that of most birds, consisting of two distinct layers with different microstructures. This bilayered organization, and distinct microstructural characteristics, provides it with exceptional mechanical properties. The inner layer, constituting about one third of the eggshell thickness, contains columnar calcite crystal units arranged vertically as in most bird shells. However, the thicker outer layer has a more complex microstructural arrangement formed by a switch to smaller calcite domains with diffuse/interlocking boundaries, partly resembling the interfaces seen in mollusk shell nacre. The switching process that leads to this remarkable second-layer microstructure is unknown. Our results indicate that the microstructural switching is triggered by changes in the inter- and intracrystalline organic matrix. During production of the outer microcrystalline layer in the later stages of eggshell formation, the interactions of organic matter with mineral induce an accumulation of defects that increase crystal mosaicity, instill anisotropic lattice distortions in the calcite structure, interrupt epitaxial growth, reduce crystallite size, and induce nucleation events which increase crystal misorientation. These structural changes, together with the transition between the layers and each layer having different microstructures, enhance the overall mechanical strength of the Guinea fowl eggshell. Additionally, our findings provide new insights into how biogenic calcite growth may be regulated to impart unique functional properties. Statement of significance: Avian eggshells are mineralized to protect the embryo and to provide calcium for embryonic chick skeletal development. Their thickness, structure and mechanical properties have evolved to resist external forces throughout brooding, yet ultimately allow them to crack open during chick hatching. One particular eggshell, that of the Guinea fowl, has structural features very different from other galliform birds – it is bilayered, with an inner columnar mineral structure (like in most birds), but it also has an outer layer with a complex microstructure which contributes to its superior mechanical properties. This work provides novel and new fundamental information about the processes and mechanisms that control and change crystal growth during the switch to microcrystalline domains when the second outer layer forms., We are grateful for financial support through grants CGL2015-64683-P (A.R.N.), PID2020-116660GB-I00 (Ministerio de Economía y Competitividad, Spain; (MCIN/AEI/10.13039/501100011033/) (A.R.N. A.G.C.), RNM-938 group (Junta de Andalucía, Spain) (A.R.N.), and RNM-363 (A.G.C.) and the Unidad Científica de Excelencia UCE-PP2016-05 (University of Granada) (A.R.N. A.G.C.). This project was conceived and carried out by a collaborative project (IMPACT Project, JG coordinator) between French, Spanish and Canadian laboratories, financed by Agence Nationale de la Recherche (ANR-13-BSV6-0007-01) (J.G. A.R.N. M.T.H.). The participation of M.T.H and M.D.M. was supported by the Natural Sciences and Engineering Research Council of Canada (NSERC, Discovery program RGPIN-2022-04803 and RGPIN-2016-05031, respectively). We thank José Romero and Juan de Dios Bueno (U. Granada), and the staff of McGill University's Facility for Electron Microscopy Research, particularly Weawkamol Leelapornpisit, for their help with sample preparation and analyses. We are also grateful for helpful discussions with Erika Griesshaber (U. Munich). We thank Christian Grenier (UGR) for his help with EBSD data processing. This work was also supported by the Canada Research Chairs program (M.D.M. is the Canada Research Chair in Biomineralization). Both M.D.M. and N.R. are members of the Québec FRQS Centre de Recherche en Biologie Structurale, and the Québec FRQS Réseau de Recherche en Santé Buccodentaire et Osseuse. We also thank the Integrated Quantitative Bioscience Initiative for equipment access, and Comet Technologies Canada Inc. (Montreal) for making available to us at no charge an academic license for their Dragonfly image analysis software used in this study. We also appreciate the comments from anonymous reviewers that helped us to improve the quality of the manuscript. JG conceived the Impact project in which this program takes place, designed the animal experiments. ARN designed the analytical part, analyzed the data and wrote the first manuscript. NDG contributed the FTIR, XRD and SEM analyses. DA and MDM contributed the light microscope histology and immunohistochemistry analyses, and the FIB-SEM preparation and TEM. NLR performed the animal experimentation. AGC contributed to Figs. 1 and 5 and to data discussion and writing. AGS performed the EBSD analysis. NR contributed the micro-CT acquisition and analyses. MTH and YN contributed substantially to writing part of the discussion. All authors contributed extensively to the writing and editing of the entire manuscript.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The shell structure and chamber production cycle of the cephalopod Spirula (Coleoidea, Decabrachia)

  • Checa, Antonio G.
  • Grenier, Christian
  • Griesshaber, Erika
  • Schmahl, Wolfgang W.
  • Cartwright, Julyan H. E.
  • Salas, Carmen
  • Oudot, Morgane
The endocochleate coleoid cephalopod Spirula spirula, the only present-day representative of the order Spirulida, secretes a coiled shell consisting of a series of chambers divided by septa and connected by a siphuncle. It is the shell closest to those of Recent and extinct ectochleate cephalopods: nautiloids, ammonoids. Therefore, its study may help to understand which characters remained unchanged or became transformed during the evolution of endocochleates. We have carried out detailed observations on the different structures composing the Spirula shell, with the aim of reconstructing their morphology, distribution, and mutual relationships. Alongside this, we also review the previous profuse terminology. Taking into account the additional information provided by growth lines and crystal orientations, we propose mechanisms for the secretion of the shell structures. All these mechanisms are integrated in a consistent way into a general model of chamber formation. The periostracum is secreted within a distinct periostracal groove. The outer shell layer is secreted externally to the periostracum by the soft tissues lining the shell externally. The inner shell layer is produced by the shell wall mantle, whereas the septa and the siphuncle are made periodically by a differentiated septal/siphuncular mantle. The most adoral septal mantle edge changes from secreting septal to inner shell wall material to produce the mural flap. The adapical ridge is formed by passive precipitates from cameral fluid residues trapped by surface tension, whereas the fibrous prismatic deposits of the connecting ring are biominerals produced remotely within mantle secretions. Homologies with Nautilus and Sepia are discussed., Funding was provided by projects PID2020-116660GB-I00 of the Spanish Ministerio de Ciencia e Innovación (AGC, CG, CS), and B-RNM-265-UGR18 of the Consejería de Conocimiento, Investigación y Unversidad of the Junta de Andalucía (AC), the Unidad Científica de Excelencia UCE-PP2016-05 of the University of Granada (AGC, CG), and the Research Group RNM363 of the Junta de Andalucía (AGC, CG)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Biological Crystals in Chamid Bivalve Shells: Diversity in Morphology and Crystal Arrangement Pattern

  • Hoerl, Sebastian
  • Griesshaber, Erika
  • Checa, Antonio G.
  • Schmahl, Wolfgang W.
Chamid bivalves are marine organisms that live in high-energy environments and are cemented to hard substrates. To avoid shell damage, the organisms form thick, densely ornamented shells. Shell material consists of aragonite, and the ornamentation may be either aragonitic or calcitic. The latter can be developed as scaly spines, rows of blades, or comarginal, radial arched lamellae. We investigated biological crystal morphology and mode of assembly of Chama arcana and Chama gryphoides shells. Structural characteristics were obtained from electron backscatter diffraction (EBSD) measurements, complemented with laser confocal and BSE imaging. We found a wide range of crystal morphologies and sizes, ranging from irregularly shaped calcite and/or aragonite prisms to tiny and thin aragonite laths. We observed four different modes of crystal assembly patterns: 1. strongly interlocked dendritic calcite units forming the ornamentation blades; 2. aragonite laths arranged to lamellae forming the outer shell layer, the layer adjacent to the calcite; 3. aragonite laths arranged into blocks comprising inner shell layers or aragonitic ornamentations; and 4. shell portions consisting of aragonite prisms, structured in size and crystal orientation, at muscle attachment sites. These four different types of crystal arrangements were observed for the shells of the investigated chamid species; however, they had slightly different strengths of structuring and slight variations in crystal organisation. Additionally, we observed unique microstructural features in Chama shells: We report ornamentation crystals resembling idiomorphic calcite and novel, twinned entities found at the changeover between the aragonitic layers. We highlight and discuss these differences and anomalies in this contribution., W.W.S., E.G. and S.H. were funded by the German Research Council Programmes GR 9/1234, SCHM 930/11-2. A.G.C. was funded by the project PID2020116660GB-I00 of the Spanish Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033/).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal organisation and material properties of Chama and Glycymeris myostraca and shells

  • Hoerl, S.
  • le Moine, T.
  • Peter, N. J.
  • Amini, Sajad Ghaed
  • Griesshaber, Erika
  • Wang, J.
  • Salas, C.
  • Checa, Antonio G.
  • Schwaiger, R.
  • Schmahl, Wolfgang W.
Movement of bivalve hard and soft tissue requires muscular action. Despite diverse bivalve lifestyles and living environments, the myostracum, a specific hard tissue formed where muscles attach to the shell, appears similar in structure for species of many bivalve orders. We investigated myostracal and non-myostracal, valve, microstructure, texture and material properties of Chamidae and Glycymerididae species with electron-backscatter-diffraction, laser-confocal and backscatter electron imaging and nanoindentation testing. Chamidae and Glycymerididae follow different lifestyles and live in distinct environments. Chamidae are cemented to substrate and live in wave-swept, shallow, waters. Glycymerididae dwell in calm water and burrow into sandy/muddy sediment. We found that myostracal aragonite of all investigated species has a crystal assembly pattern that reflects crystal growth through growth competition. Aragonite is extensively twinned in the myostracum and non-myostracal, valve, layers, not in the calcitic ornamentation. For myostracal aragonite, we found cyclic twinning, for non-myostracal aragonite the twinning was polysynthetic or polycyclic. We show how twinning and crystallographic texture are transmitted between myostracal and non-myostracal, valve, layers. Relative to non-biological aragonite, myostracal and non-myostracal, valve, indentation elastic modulus is reduced by 10–15 % and 15–20 %, respectively; myostracal and valve hardness is increased by 15–20 % and 5–10 %, respectively. Comparing modulus and hardness between aragonitic microstructures, we found that, relative to other microstructures, myostracal modulus is increased by 5 % and myostracal hardness by 15 %. Hence, the myostracal material shows a unique and specific microstructure, texture, modulus, and hardness that might be necessary for muscle attachment to enable the lifestyle-controlled requirements posed onto the organism., We thank Prof. N. Lagos Su\u00E1rez, Centro de Investigaci\u00F3n e Innovaci\u00F3n para el Cambio Clim\u00E1tico \u2013 CIICC, Universidad Santo Tomas, Santiago, Chile, Dr. M. Peharda Uljevi\u0107, Institute of Oceanography and Fisheries, Split, Croatia and Prof. S. Gofas, Departamento de Biolog\u00EDa Animal, Facultad de Ciencias, Universidad de M\u00E1laga, M\u00E1laga, Spain for the samples. W. W. S. E. G. and S.H. were funded by the German Research Council Programmes GR 9/1234, SCHM 930/11-2. C. S. and A. G. C. were funded by the projects PID2020116660GB-I00 of the Spanish Ministerio de Ciencia e Innovaci\u00F3n (MCIN/AEI/10.13039/501100011033/) and PCM_00092 (Consejer\u0131\u0301a de Econom\u0131\u0301a, Innovaci\u00F3n, Ciencia y Empleo, CEICE, Junta de Andaluc\u0131\u0301a, JA). A. G. C. acknowledges the Research Group RNM363 (CEICE, JA) and the Unidad Cient\u00EDfica de Excelencia UCE-PP2016-05 (University of Granada).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molluscs generate preferred crystallographic orientation of biominerals by organic templates, the texture and microstructure of Caudofoveata (Aplacophora) shells

  • Yin, X.
  • Castro‑Claros, J. D.
  • Griesshaber, Erika
  • Salas, C.
  • Sancho Vaquer, A.
  • Checa, Antonio G.
  • Schmahl, Wolfgang W.
Caudofoveata are molluscs that protect their vermiform body with a scleritome, a mosaic of unconnected blade/lanceolate-shaped aragonite sclerites. For the species Falcidens gutturosus and Scutopus ventrolineatus we studied the crystallographic constitution and crystal orientation texture of the sclerites and the scleritome with electron-backscatter-diffraction (EBSD), laser-confocal-microscopy (LCM) and field-emission electron microscopy (FE-SEM) imaging. Each sclerite is an aragonite single crystal that is completely enveloped by an organic sheath. Adjacent sclerites overlap laterally and vertically are, however, not connected to each other. Sclerites are thickened in their central portion, relative to their periphery. Thickening increases also from sclerite tip towards its base. Accordingly, cross-sections through a sclerite are straight at its tip, curved and bent towards the sclerite base. Irrespective of curved sclerite morphologies, the aragonite lattice within the sclerite is coherent. Sclerite aragonite is not twinned. For each sclerite the crystallographic c-axis is parallel to the morphological long axis of the sclerite, the a-axis is perpendicular to its width and the b-axis is within the width of the sclerite. The single-crystalinity of the sclerites and their mode of organization in the scleritome is outstanding. Sclerite and aragonite arrangement in the scleritome is not given by a specific crystal growth mode, it is inherent to the secreting cells. We discuss that morphological characteristics of the sclerites and crystallographic preferred orientation (texture) of sclerite aragonite is not the result of competitive growth selection. It is generated by the templating effect of the organic substance of the secreting cells and associated extracellular biopolymers., Open Access funding enabled and organized by Projekt DEAL. C. S., J.-D. C.-C., and A. G. C. were funded by the projects PID2020116660GB-I00 of the Spanish Ministerio de Ciencia e Innovación (MCIN/AEI/ https://doi.org/10.13039/501100011033 /) and PCM 00092 (Junta de Andalucía). A. G. C. acknowledges the Research Group RNM363 (Consejería de Econoía Innovación, Ciencia y Empleo, Junta de Andalucía) and the Unidad Científica de Excelencia UCE-PP2016-05 (University of Granada). J.-D. C.-C. was funded by the grant PCIN-2017\u2013098 (Junta de Andalucía) (C.I.S.-D) and was supported by a pre-doctoral FPU grant (Ministry of Science, Innovation and Universities). W. W. S., E. G., X. Y. were funded by the German Research Council Programmes GR 9/1234, SCHM 930/11-2.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Skeletal microstructures of cheilostome bryozoans (phylum Bryozoa, class Gymnolaemata): crystallography and secretion patterns

  • Grenier, Christian
  • Griesshaber, Erika
  • Schmahl, Wolfgang W.
  • Berning, Bjorn
  • Checa, Antonio G.
Gymnolaemata bryozoans produce CaCO skeletons of either calcite, aragonite, or both. Despite extensive research, their crystallography and biomineralization patterns remain unclear. We present a detailed study of the microstructures, mineralogy, and crystallography of eight extant cheilostome species using scanning electron microscopy, electron backscatter diffraction, atomic force microscopy, and micro-computed tomography. We distinguished five basic microstructures, three calcitic (tabular, irregularly platy, and granular), and two aragonitic (granular-platy and fibrous). The calcitic microstructures consist of crystal aggregates that transition from tabular or irregularly platy to granular assemblies. Fibrous aragonite consists of fibers arranged into spherulites. In all cases, the crystallographic textures are axial, and stronger in aragonite than in calcite, with the c-axis as the fiber axis. We reconstruct the biomineralization sequence in the different species by considering the distribution and morphology of the growth fronts of crystals and the location of the secretory epithelium. In bimineralic species, calcite formation always predates aragonite formation. In interior compound walls, growth proceeds from the cuticle toward the zooecium interior. We conclude that, with the exception of tabular calcite, biomineralization is remote and occurs within a relatively wide extrapallial space, which is consistent with the inorganic-like appearance of the microstructures. This biomineralization mode is rare among invertebrates., Funding for open access publishing: Universidad de Granada/CBUA. CG and AGC were funded by projects CGL2017-85118-P, PID2020116660GB-I00 (Spanish Ministry of Science and Innovation: MCIN/AEI/10.13039/501100011033; \u201CFEDER Una manera de hacer Europa\u201D), and PCM 00092 (Consejería de Economía, Innovación, Ciencia y Empleo, Junta de Andalucía), the Research Group RNM363 (latter institution), and the Unidad Cient\u00EDfica de Excelencia UCE-PP2016-05 (University of Granada). Funding for open access was provided by Universidad de Granada/Consorcio de Bibliotecas Universitarias de Andalucía (CBUA).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelling components of nacre structure in silico: Interactions of a nacre peptide with chitin and an aragonite surface

  • Macías-Sánchez, Elena
  • Meruvia-Rojas, Yumeida V.
  • Cartwright, Julyan H. E.
  • Checa, Antonio G.
  • Sainz-Díaz, C. Ignacio
The nacre formation process is a fascinating phenomenon involving mineral phase transformations, self-assembly processes, and protein–mineral interactions, resulting in a hierarchical structure that exhibits outstanding mechanical properties. However, this process is only partially known, and many aspects of nacre structure are not well understood, especially at the molecular scale. To understand the interplay between components—aragonite, protein and chitin—of the structure of nacre observed experimentally, we investigate the interactions of a peptide that is part of the protein lustrin A, identified in the nacreous layer of the shell of the abalone Haliotis rufescens, with the (001) crystal surface of aragonite and the chitin molecule. We report the results of atomistic molecular-modelling calculations and molecular-dynamics simulations of the peptide interacting with both the aragonite surface and the chitin polymer. The peptide shows an energetically favourable binding to the aragonite surface. The interaction of the carboxylic groups of the glutamic unit with the crystalline surface is essential to reproduce the characteristic elastomeric properties of this peptide in nacre., This work was supported by the project PID2022-141993NA-I00, PID2020-116660GB-I00, PID2023-146394NB-I00 (MCIU/AEI/https://doi.org/10.13039/501100011033/) and PCM 00092 (Consejería de Economía, Innovación, Ciencia y Empleo, Junta de Andaluc\u00EDa, and ERDF/UE). EMS is supported by the Research Program Juan de la Cierva Incorporación (IJC2020-043639-I) funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and \u201CEuropean Union NextGenerationEU/PRTR\u201D. ACG is supported by the Unidad Científica de Excelencia UCE-PP2016-05 (University of Granada). Y. V. M. was supported by the JAE-Intro program JAEINT_22_00028 of CSIC. The authors would like to acknowledge the contribution of the European COST Actions CA17120 and CA21169 supported by the EU Framework Programme Horizon 2020
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organic macromolecules transport a significant proportion of the calcium precursor for nacre formation

  • Macías-Sánchez, Elena
  • Huang, Xing
  • Willinger, Marc G.
  • Rodriguez-Navarro, Alejandro
  • Checa, Antonio
The mechanism of nacre formation in gastropods involves a vesicular system that transports organic and mineral precursors from the mantle epithelium to the mineralization chamber. Between them lies the surface membrane, a thick organic structure that covers the mineralization chamber and the forming nacre. The surface membrane is a dynamic structure that grows by the addition of vesicles on the outer side and recedes by the formation of interlamellar membranes on the inner side. By using a combination of electron microscopy imaging and spectroscopy, we have monitored the journey of the vesicles from the mantle epithelium to the mineralization chamber, focusing on the elemental composition of the organic structures at each stage. Our data reveal that transport occurs in lipid bilayer vesicles through exocytosis from the outer mantle epithelium. After release into the surface membrane, chitin undergoes a process of self-assembly and interaction with proteins, resulting in progressive changes of the internal structure of the surface membrane until the final structure of the interlamellar membranes is acquired. Finally, these detach from the inner side of the surface membrane. Elemental analysis revealed the transport of a considerable amount of calcium bound to proteins, likely forming calcium-protein complexes. Statement of significance: The formation of nacre tablets occurs through the incorporation of organic and mineral precursors extruded from the mantle epithelium. Although much attention has been paid to the presence of amorphous phases in recent decades, the calcium transport system has not yet been elucidated. We have monitored the packaging of organic and mineral precursors in the form of vesicles from the mantle epithelium to the mineralization chamber. We have shown that the surface membrane represents the zone where chitin and protein polymerization takes place, acquiring the final structure for the formation of interlamellar membranes. Interestingly, these organic structures transport a considerable amount of organic calcium into the mineralization chamber, which support a transport system based on acidic calcium-binding proteins., EMS is supported by the Knowledge Generation Project PID2022-141993NA-I00 funded by MICIU/AEI/10.13039/501100011033 and FEDER (EU) and the Research Program Juan de la Cierva Incorporación (IJC2020-043639-I) funded by MCIN/AEI/10.13039/501100011033 and EU NextGenerationEU/PRTR. A.G.C. acknowledges funding by projects PID2023-146394NB-I00 and PID2020116660GB-I00 (Spanish Ministry of Science and Innovation: MCIN/AEI/10.13039/501100011033/), the Unidad Científica de Excelencia UCE-PP2016-05 (University of Granada) and the Research Group RNM363 (Junta de Andalucía)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Correlation between nanomechanical properties and microstructural design concepts of bivalve muscle attachment sites

  • Hoerl, S.
  • Micheletti, C.
  • Amini, S.
  • Griesshaber, E.
  • Hess, K. U.
  • Checa, Antonio G.
  • Peharda, M.
  • Schmahl, Wolfgang W.
Bivalves populate various marine environments and follow diverse lifestyles: attaching to substrates, burrowing into sediments or swimming in water. Their shells play a crucial role in the survival of organisms as they shield the soft tissue from external attacks and facilitate their respective lifestyles. Valve movement is controlled by one or two adductor muscles and the hinge. While the function and structure of adductor muscles can vary, the shell-muscle attachment develops the myostracum, a unique microstructural design. Sectioned parallel and perpendicular to the inner shell surface, we investigated myostracal and non-myostracal microstructures, textures and nanomechanical properties for three bivalve species: The burrowing Glycymeris pilosa, the sessile Chama arcana and the swimming Placopecten magellanicus. Analyses were conducted using electron backscatter diffraction measurements, laser confocal and backscatter electron imaging, nanoindentation testing and thermogravimetric analysis. We find that the myostracal microstructure is generated mainly through physical determinants, regardless of the bivalve lifestyle and adductor muscle structure. If aragonitic, we show that adjacent shell layers are used as templates for the formation of the myostracal microstructure and highlight how bivalves use the adjacent crystal arrangement to predetermine myostracal microstructure up to inner shell surfaces. Furthermore, this study demonstrates how myostracal layers exceed the hardness of the non-myostracal valves and that of geological aragonite, irrespective of grain size and morphology. Due to the anisotropy of aragonite, we show that aragonite c-axis orientation notably affects the hardness of crystals. The highest hardness is measured when indentation is normal to the shell surface in aragonite c-axes direction., W. W. S., E. G., and S.H. were funded by the German Research Council Programmes GR 9/1234, SCHM 930/11-2. A. G. C. was funded by the project PID2020116660GB-I00 of the Spanish Ministerio de Ciencia e Innovación (MCIN/ AEI/10 . 13039/501100011033 /). A. G. C. acknowledges the Research Group RNM363 (CEICE, JA) and the Unidad Científica de Excelencia UCE - PP2016-05 ( University of Granada )., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oyster shells as archives of present and past environmental variability and life history traits: A multi-disciplinary review of sclerochronology methods and applications

  • Mouchi, Vincent
  • Andrus, C. Fred T.
  • Checa, Antonio G.
  • Elliot, Mary
  • Griesshaber, Erika
  • Hausmann, Niklas
  • Huyghe, Damien
  • Lartaud, Franck
  • Peharda, Melita
  • de Winter, N. J.
Oysters inhabit a variety of coastal and deep-sea settings over a wide latitudinal range and have a role as ecosystem engineers. They also represent an important food source for humans since hunter-gatherer times, which motivates interest in using oyster shells as environmental and life history archives. Still, oysters have often been disregarded in sclerochronology studies, although several methods based on both microtextural and geochemical approaches have successfully been investigated. We review how these methods have been used to improve interpretations of shell records, and we identify knowledge gaps in a variety of disciplines. Those include ecology to study larval dispersal and growth rates; archaeology to determine shell midden constructions and site occupations; and palaeoenvironmental and palaeoclimate reconstructions from tidal to annual timescales. We also suggest standardizing sclerochronology procedures to improve palaeoenvironmental reconstructions and biophysical models on oyster larval dispersal., This work benefited from French State aid managed by the Agence Nationale de la Recherche under France 2030: ANR-22-POCE-0007 and granted Vincent Mouchi post-doctoral grant. Vincent Mouchi was also financed by the ANR GEOPRAS GEOarchaeology and PRehistory of Atlantic Societies (ANR-21-CE27-0024-0). Antonio Checa aknowledges fundings from projects PID2023-146394NB-I00 and PID2020116660GB-I00 (Spanish Ministry of Science and Innovation: MCIN/AEI/10.13039/501100011033/). Melita Peharda was financed by projects BiVACME, Croatian Science Foundation Grant IP-2019-2104-8542 and RIBAR (Next Generation EU\u2014National Recovery and Resilience Plan 2021\u20132026). Niklas Hausmann acknowledges funding by the Deutsche Forschungsgemeinschaft (DFG) under the Emmy Noether Program (project number: 439799406). Niels J. de Winter acknowledges funding from the Dutch (NWO; VENI grant; VI.Veni.222.354) and Flemish Research Council (FWO Science Prize Climate Research). Franck Lartaud acknowledges funding from CNRS through the MITI interdisciplinary program ARCHIVE.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cristalización controlada de apatito nanocristalino sobre membranas orgánicas

  • Álvarez-Lloret, Pedro
  • Navarro-Zabarburú, Isabel
  • Torres-Mansilla, Adriana
  • Gómez-Morales, Jaime
  • Calderón-Toledo, Susana
  • Zavaleta, Amparo I.
Póster presentado en XLI Reunión Científica de la Sociedad Española de Mineralogía y XXVII Reunión Científica de la Sociedad Española de Arcillas, 15 al 18 de enero, Sevilla (España), Financiación del MCIU/AEI, proyecto PID2020-116660GB-I00 y 2023-151538NB-100.