Pasar al contenido principal

TOWARDS REAL-TIME ACTUATION STRATEGIES FOR FLOW CONTROL AND NOISE REDUCTION IN AIRCRAFTS.

PID2020-116937RB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

Turbulent boundary layer in a 3-element high-lift wing: coherent structures identification

  • Montalà Sales, Ricard|||0009-0000-7911-7102
  • Eiximeno Franch, Benet
  • Miró Jané, Arnau|||0000-0002-2772-6050
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
A large eddy simulation (LES) of the flow past a 30P30N high-lift three-element wing is performed at the angle of attack AoA = 9º and a Reynolds number of Re = 750,000, based on the nested chord. Results are validated against experimental data available in the literature, proving their reliability. The present work is focused on the boundary layer development along the main suction side, including the analysis of the evolution of the thickness, the friction Reynolds number, the shape factor and the Clauser pressure-gradient parameter, as well as the Reynolds stresses at given chord locations. Finally, a proper orthogonal decomposition (POD) is performed, which allows visualizing the main turbulent coherent structures present in a turbulent boundary layer., This work is partially financed by the Ministerio de Ciencia e Innovación of Spain (Ref. PID2020-116937RB-C21 / -C22). We also acknowledge the Red Española de Surpercomputación (RES) and the EuroHPC JU for granting us access to the MareNostrum IV machine based in Barcelona Supercomputing Center (Ref. IM-2022-3-0005) and to the HPC system Vega at the Institute of Information Science (Ref. EHPC-REG-2022R01-030), respectively. Finally, R. Montalá acknowledges the support of Departament de Recerca i Universitats de la Generalitat de Catalunya through a FI-SDUR graduate fellowship program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Hybrid computation of the aerodynamic noise radiated by the wake of a subsonic cylinder

  • Eiximeno Franch, Benet
  • Tur Monge, Carlos
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
The noise radiated by the flow around a cylinder in the subcritical regime at 𝑅𝑒𝐷=1×104 and at a subsonic Mach number of 𝑀=0.5 is here studied. The aerodynamic sound radiated by a cylinder has been studied with a wide range of Reynolds numbers, but there are no studies about how the Mach number affects the acoustic field in the subsonic regime. The flow field is resolved by means of large-eddy simulations of the compressible Navier–Stokes equations. For the study of the noise propagation, formulation 1C of the Ffowcs Williams–Hawkings analogy is used. The fluid flow results show good agreement when comparing the surface pressure coefficient, the recirculation length, the vortex shedding frequency and the force coefficients against other studies performed under similar conditions. The dynamic mode decomposition of the pressure fluctuations is used to relate them with the far-field noise. It is shown that, in contrast to what happens for low Mach numbers, quadrupoles have a significant impact mainly in the observers located in the streamwise direction. This effect leads to a global monopole directivity pattern as the shear fluctuations compensate for the lower value of the aeolian tone away from the cross-stream direction., This work was partially financially supported by the Ministerio de Economía, Industria y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (refs PID2020-116937RB-C21 and PID2020-116937RB-C22). B. Eiximeno’s work was funded by a contract from the Subprograma de Ayudas Predoctorales given by the Ministerio de Ciencia e Innovación (PRE2021-096927). O. Lehmkuhl’s work was financed by a Ramón y Cajal postdoctoral contract from the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (RYC2018-025949-I)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the wake dynamics of an oscillating cylinder via proper orthogonal decomposition

  • Eiximeno Franch, Benet
  • Miró Jané, Arnau|||0000-0002-2772-6050
  • Cajas García, Juan Carlos
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
The coherent structures and wake dynamics of a two-degree-of-freedom vibrating cylinder with a low mass ratio at Re=5300 are investigated by means of proper orthogonal decomposition (POD) of a numerical database generated using large-eddy simulations. Two different reduced velocities of U*=3.0 and U*=5.5, which correspond with the initial and super-upper branches, are considered. This is the first time that this kind of analysis is performed in this kind of system in order to understand the role of large coherent motions on the amplification of the forces. In both branches of response, almost 1000 non-correlated in-time velocity fields have been decomposed using the snapshot method. It is seen that a large number of modes is required to represent 95% of the turbulent kinetic energy of the flow, but the first two modes contain a large percentage of the energy as they represent the wake large-scale vortex tubes. The energy dispersion of the high-order modes is attributed to the cylinder movement in the inline and cross-stream directions. Substantially different POD modes have been found in the two branches. While the first six modes resemble those observed in the static cylinder or in the initial branch of a one-degree of freedom cylinder in the initial branch, the modes not only contain information about the wake vortexes in the super-upper branch but also about the formation of the 2T vortex pattern and the Taylor–Görtler structures. It is shown that the 2T vortex pattern is formed by the interplay between the Taylor–Görtler stream-wise vortical structures and the cylinder movement and is responsible for the increase in the lift force and larger elongation in the super-upper branch., This work has been partially financially supported by the Ministerio de Economía, Industria y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (Ref. PID2020-116937RB-C21, PID2020-116937RB-C22), and by the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 956104. The JU receives support from the European Union’s Horizon 2020 research and innovation programme and Spain, France, Germany. O. Lehmkuhl work is financed by a Ramón y Cajal postdoctoral contract by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (RYC2018-025949-I)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Deep reinforcement learning strategies for optimizing flow control in wings

  • Montalà Sales, Ricard|||0009-0000-7911-7102
  • Font García, Bernat
  • Suárez Morales, Pol
  • Rabault, Jean
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Vinuesa Motilva, Ricardo
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
A computational fluid dynamics (CFD) framework to combine deep reinforcement learning (DRL) with active flow control (AFC) simulations is presented. This framework is first validated in a canonical geometry, the flow past a cylinder at REYNOLDS number 𝑅𝑒 = 100, achieving a drag reduction of roughly 10%. Then, the methodology is applied to a more complex case in order to exploit the DRL capabilities to control massive separations of turbulent flows. To do this, the flow past the SD7003 wing at 𝑅𝑒 = 60,000 and angle of attack 𝐴𝑜𝐴 = 14◦ is analyzed, where the DRL control achieves an increase in the aerodynamic efficiency of approximately 157%., This research has received financial support from the Ministerio de Ciencia e Innovación of Spain (PID2020116937RB-C21 and PID2020-116937RB-C22).Simulations were conducted with the assistance of the Red Española de Supercomputación, who granted computational resources to the HPC facility of MareNostrum 5, at the Barcelona Supercomputing Center (IM-2024-2-0004). Ricard Montalà work is funded by a FI-SDUR grant (2022 FISDU 00066) from the Departament de Recerca i Universitats de la Generalitat de Catalunya. Oriol Lehmkuhl has been partially supported by a Ramón y Cajal postdoctoral contract (RYC2018-025949-I). The authors also acknowledge the support of the Departament de Recerca i Universitats de la Generalitat de Catalunya through the research group Largescale Computational Fluid Dynamics (2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (2021 SGR 01051)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Compressibility effects on the wake dynamics of a circular cylinder

  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Eiximeno Franch, Benet
  • Gasparino, Lucas
  • Tur Monge, Carlos
  • Muela Castro, Jordi|||0000-0003-1583-8490
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
Compressible large-eddy simulations of the flow past a circular cylinder at Reynolds numbers Re = 104 and Mach numbers in the range M = 0.2-1.2 are performed. Changes in the wake dynamics, coherent structures and flow topology brought about compressibility effects are discussed and analysed in detail., This work has been partially financially supported by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (ref. PID2020-116937RB-C21 and PID2020-116937RB-C22). O.L. has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018-025949-I). I.R. also acknowledges fundings by AGAUR (Ref. 2021 SGR 01051)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Toward the usage of deep learning surrogate models in ground vehicle aerodynamics

  • Eiximeno Franch, Benet
  • Miró Jané, Arnau|||0000-0002-2772-6050
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
This study introduces a deep learning surrogate model designed to predict the evolution of the mean pressure coefficient on the back face of a Windsor body across a range of yaw angles from 2.5◦ to 10◦ . Utilizing a variational autoencoder (VAE), the model effectively compresses snapshots of back pressure taken at yaw angles of 2.5◦, 5◦, and 10◦ into two latent vectors. These snapshots are derived from wall-modeled large eddy simulations (WMLESs) conducted at a Reynolds number of ReL = 2.9 × 106. The frequencies that dominate the latent vectors correspond closely with those observed in both the drag’s temporal evolution and the dynamic mode decomposition. The projection of the mean pressure coefficient to the latent space yields an increasing linear evolution of the two latent variables with the yaw angle. The mean pressure coefficient distribution at a yaw angle of 7.5◦ is predicted with a mean error of e = 3.13% when compared to the WMLESs results after obtaining the values of the latent space with linear interpolation., The research leading to this work has been partially funded by the European Project NextSim, which has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 956104 and cofounded by the Spanish Agencia Estatal de Investigacion (AEI) under grant agreement PCI2021-121962. This work was partially financially supported by the Ministerio de Economía, Industria, y Competitividad, as well as the Secretaría de Estado de Investigación, Desarrollo, e Innovación in Spain (refs PID2020-116937RB-C21 and PID2020-116937RB-C22). B. Eiximeno’s work was funded by a contract from the Subprograma de Ayudas Predoctorales given by the Ministerio de Ciencia e Innovación (PRE2021-096927). Oriol Lehmkuhl has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018-025949-I). The authors acknowledge the support of the Departament de Recerca i Universitats de la Generalitat de Catalunya through the research group Large-scale Computational Fluid Dynamics (Code: 2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (Code: 2021 SGR 01051)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Self-induced large-scale motions in a three-dimensional diffuser

  • Miró Jané, Arnau|||0000-0002-2772-6050
  • Eiximeno Franch, Benet
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
A direct numerical simulation of a three-dimensional diffuser at Reynolds number Re = 10,000 (based on inlet bulk velocity) has been performed using a low-dissipation finite element code. The geometry chosen for this work is the Stanford diffuser, introduced by Cherry et al. (Int. J. Heat Fluid Flow 29:803–811, 2008). Results have been exhaustively compared with the published data with a quite good agreement. Additionally, further turbulent statistics have been provided such as the Reynolds stresses or the turbulent kinetic energy. A proper orthogonal decomposition and a dynamic mode decomposition analyses of the main flow variables have been performed to identify the main characteristics of the large-scale motions. A combined, self-induced movement of the large-scales has been found to originate in the top-right expansion corner with two clear features. A low-frequency diagonal cross-stream travelling wave first reported by Malm et al. (J. Fluid Mech. 699:320–351, 2012), has been clearly identified in the spatial modes of the stream-wise velocity components and the pressure, associated with the narrow band frequency of St¿[0.083,0.01] . This movement is caused by the geometrical expansion of the diffuser in the cross-stream direction. A second low-frequency trait has been identified associated with the persisting secondary flows and acting as a back and forth global accelerating-decelerating motion located on the straight area of the diffuser, with associated frequencies of St<0.005 . The smallest frequency observed in this work has been St=0.0013 . This low-frequency observed in the Stanford diffuser points out the need for longer simulations in order to obtain further turbulent statistics., The research leading to this work has been partially funded by the European Project NextSim which has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 956104 and co-founded by the Spanish Agencia Estatal de Investigacion (AEI) under grant agreement PCI2021-121962. Benet Eiximeno also acknowledges the financial support by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (Refs: PID2020-116937RB-C21 and PID2020-116937RB-C22). Oriol Lehmkuhl has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018-025949-I). He also acknowledges the support of the European Project HiFi-TURB which has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814837. We also acknowledge the Barcelona Supercomputing Center for awarding us access to the MareNostrum IV machine based in Barcelona, Spain. The authors acknowledge the support of Departament de Recerca i Universitats de la Generalitat de Catalunya to the Research Group Large-scale Computational Fluid Dynamics (Code: 2021 SGR 00902)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the dynamics of the turbulent flow past a three-element wing

  • Montalà Sales, Ricard|||0009-0000-7911-7102
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
A comprehensive analysis of the unsteady flow dynamics past the 30P30N three-element high lift wing is performed by means of large eddy simulations at different angles of attack (AoA=5°, 9°, and 23°) and at a Reynolds number of Rec=750.000 (based on the nested chord). Results are compared with experimental and numerical investigations, showing a quantitatively good agreement and, thus, proving the reliability and accuracy of the present simulations. Within the slat and main coves, large recirculation bubbles are bounded by shear layers, where the onset of turbulence is triggered by Kelvin–Helmholtz instabilities. In the energy spectrum of the velocity fluctuations, the footprint of these instabilities is detected as a broadband peak; its frequency being moved toward lower values as the angle of attack increases. Kelvin–Helmholtz vortices roll-up and break down into small scales that eventually impinge into the slat and main coves lower surfaces. The slat impingement shows to be more prominent, and hence, larger velocity and pressure fluctuations are observed. The impingement strength diminishes with the angle of attack in both coves, while higher fluctuations are originated on the slat and main respective suction sides, leading to larger boundary layers. This is associated with the displacement of the stagnation point with the angle of attack. Another salient feature observed is the laminar-to-turbulent flow transition in the main and flap leading edges although the average location of this transition seems to not be affected by the angle of attack. Tollmien–Schlichting instabilities precede this transition, with the disturbances amplified by the inviscid mode at low angles of attack, while at AoA=23°, the local Reynolds number on the main suction side is incremented and the viscous mode becomes important. The analysis shows that the turbulent wake formed at the trailing edge of all elements dominates the dynamics downstream. This is especially true at the higher angle of attack, where a large region of velocity deficit above the flap is observed, thus indicating the onset of stall conditions., This research has received financial support from the Ministerio de Ciencia e Innovación of Spain (Nos. PID2020-116937RB-C21 and PID2020-116937RB-C22). Furthermore, simulations were conducted with the assistance of the Red Española de Supercomputación (RES) and the EuroHPC JU, who granted us computational resources at the HPC facilities of MareNostrum IV, at Barcelona Supercomputing Center (IM-2022-3-0005), and Vega, at Institute of Information Science (REG- 2022R01-030), respectively. Finally, R. Montalà would like to express gratitude to the Departament de Recerca i Universitats de la Generalitat de Catalunya for awarding the FI-SDUR grant (No. 2022 FISDU 00066), which supports his doctoral studies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Data-driven wall modeling for LES involving non-equilibrium boundary layer effects

  • Radhakrishnan, Sarath
  • Calafell Sandiumenge, Joan|||0000-0002-2333-7314
  • Miró Jané, Arnau|||0000-0002-2772-6050
  • Font García, Bernat
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
Purpose Wall-modeled large eddy simulation (LES) is a practical tool for solving wall-bounded flows with less computational cost by avoiding the explicit resolution of the near-wall region. However, its use is limited in flows that have high non-equilibrium effects like separation or transition. This study aims to present a novel methodology of using high-fidelity data and machine learning (ML) techniques to capture these non-equilibrium effects. Design/methodology/approach A precursor to this methodology has already been tested in Radhakrishnan et al. (2021) for equilibrium flows using LES of channel flow data. In the current methodology, the high-fidelity data chosen for training includes direct numerical simulation of a double diffuser that has strong non-equilibrium flow regions, and LES of a channel flow. The ultimate purpose of the model is to distinguish between equilibrium and non-equilibrium regions, and to provide the appropriate wall shear stress. The ML system used for this study is gradient-boosted regression trees. Findings The authors show that the model can be trained to make accurate predictions for both equilibrium and non-equilibrium boundary layers. In example, the authors find that the model is very effective for corner flows and flows that involve relaminarization, while performing rather ineffectively at recirculation regions. Originality/value Data from relaminarization regions help the model to better understand such phenomenon and to provide an appropriate boundary condition based on that. This motivates the authors to continue the research in this direction by adding more non-equilibrium phenomena to the training data to capture recirculation as well., SR acknowledges the financial support of the Ministerio de Ciencia y Innovación y Universidades, for the grant, Ayudas para contratos predoctorales para la formación de doctors (Ref: BES-2017081982). OL has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018025949-I). This work was partially supported by the Ministerio de Economía, Industria y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (refs: PID2020-116937RB-C21 and PID2020-116937RB-C22). The authors also acknowledge the Barcelona Supercomputing Center for awarding us access to the MareNostrum IV machine based in Barcelona, Spain.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Temperature gradient effects on a turbulent channel flow at Ret=400

  • García Berenguer, Marina|||0000-0003-4324-3427
  • Gasparino, Lucas
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
A direct numerical simulation (DNS) of an asymmetrically heated turbulent channel flow has been performed to study the temperature gradient effects on the turbulence. The case has been set as a compressible flow with variable thermophisical properties at mean friction Reynolds number Retm = 400 submitted to a high-temperature gradient between the two walls (Thot /Tcold = 2). The behaviour differences between the walls of the channel are discussed., This work has been partially financially supported by the Ministerio de Economía y Competi- tividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (ref. PID2020- 116937RB-C21 and PID2020-116937RB-C22). We also acknowledge Red Española de Super- computación (RES) for awarding access to the MareNostrum IV machine based in Barcelona, Spain (IM-2022-3-0010). The corresponding first author gratefully acknowledges the Universi- tat Politècnica de Catalunya and the Banco Santander for the financial support of her predoctoral grant FPI-UPC., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Differentially heated turbulent channel flow two-point correlations

  • García Berenguer, Marina|||0000-0003-4324-3427
  • Silva, Lucas Gasparino Ferreira da
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
This study analyzes the behavior of a differentially heated channel flow by means of a direct numerical simulations (DNS) with variable thermophysical properties under low-speed conditions focusing on the impact of the temperature gradient on the turbulence structures near the channel walls. The simulations were conducted at a mean friction Reynolds number of Retm = 400 with a temperature ratio between the walls of Thot/Tcold = 2. Results show significant differences between the hot and cold walls that lead to an increased heat transfer at the hot wall and a higher turbulent production in the cold wall., This work has been partially financially supported by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (ref. PID2020116937RB-C21 and PID2020-116937RB-C22). The corresponding first author gratefully acknowledges the Universitat Politècnica de Catalunya and the Banco Santander for the financial support of her predoctoral grant FPI-UPC.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Numerical study of the flow past a three-element high-lift airfoil at different angles of attack

  • Montalà Sales, Ricard|||0009-0000-7911-7102
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
A parametric study of the 30p30n three-element high-lift airfoil is conducted by changing the angle of attack at α = 5, 9 and 23◦ at a constant Reynolds number of Rec = 750, 000. Computational predictions are performed employing large eddy simulations., This work has been partially financially supported by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (ref. PID2020-116937RB-C21 and PID2020-116937RB-C22). We also acknowledge Red Española de Surpercomputación (RES) for awarding us access to the MareNostrum IV machine based in Barcelona, Spain (Ref IM-2022-3-0005); as well as the HPC RIVR consortium (www.hpc-rivr.si) and EuroHPC JU (eurohpc-ju.europa.eu under the project ID EHPC-REG-2022R01-030) for funding this research by providing computing resources of the HPC system Vega at the Institute of Information Science (www.izum.si). R. Montalà acknowledges support of Departament de Recerca i Universitats de la Generalitat de Catalunya through a FI-SDUR graduate fellowship program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Turbulent boundary layer in a 3-element high-lift wing: coherent structures identification

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

PyLOM: A HPC open source reduced order model suite for fluid dynamics applications

  • Eiximeno Franch, Benet
  • Miró Jané, Arnau|||0000-0002-2772-6050
  • Begiashvili, Beka
  • Valero Sanchez, Eusebio
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
This paper describes the numerical implementation in a high-performance computing environment of an open-source library for model order reduction in fluid dynamics. This library, called pyLOM, contains the algorithms of proper orthogonal decomposition (POD), dynamic mode decomposition (DMD) and spectral proper orthogonal decomposition (SPOD), as well as, efficient SVD and matrix-matrix multiplication, all of them tailored for supercomputers. The library is profiled in detail under the MareNostrum IV supercomputer. The bottleneck is found to be in the QR factorization, which has been solved by an efficient binary tree communications pattern. Strong and weak scalability benchmarks reveal that the serial part (i.e., the part of the code that cannot be parallelized) of these algorithms is under 10% for the strong scaling and under 0.7% for the weak scaling. Using pyLOM, a POD of a dataset containing 1.14 × 10sup8 gridpoints and 1808 snapshots that takes 6.3Tb of memory can be computed in 81.08 seconds using 10368 CPUs. Additioally, the algorithms are validated using the datasets of a flow around a circular cylinder at ReD = 100 and ReD = 1 × 10sup4 , as well as the flow in the Stanford diffuser at Reh = 1 × 10sup4 ., The research leading to this work has been partially funded by the European Project NextSim which has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 956104 and co-founded by the Spanish Agencia Estatal de Investigación (AEI) under grant agreements PCI2021-121962 and PCI2021-121937. This work was partially financially supported by the Ministerio de Economía, Industria y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (refs PID2020-116937RB-C21 and PID2020-116937RB-C22). B. Eiximeno’s work was funded by a contract from the Subprograma de Ayudas Predoctorales given by the Ministerio de Ciencia e Innovación (PRE2021-096927). Oriol Lehmkuhl has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018-025949-I). The authors acknowledge the support of Departament de Recerca i Universitats de la Generalitat de Catalunya to the Research Group Large-scale Computational Fluid Dynamics (Code: 2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (Code: 2021 SGR 01051). We also acknowledge the Barcelona Supercomputing Center for awarding us access to the MareNostrum IV machine based in Barcelona, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical investigation of forced convection heat transfer from a sphere at low Prandtl numbers

  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
  • Campo, Antonio
Direct numerical simulations of the flow and forced convective heat transfer around a sphere at Reynolds numbers between 𝑅𝑒 = 500 and 𝑅𝑒 = 1000 are performed. We investigate the effects of the Prandtl number (𝑃 𝑟) on the forced convective heat transfer from a sphere for various fluids having 𝑃 𝑟 = 0.01, 0.1, 0.7. At the larger Prandtl number, the convective transport due to the vortex shedding process dominates over the diffusive transport. As the Prandtl number decreases, diffusive effects become important. Moreover, the thermal boundary layer increases with decrements of the Prandtl number, which results in a reduction in the local and mean non-dimensional heat transfer coefficient. It is seen that at 𝑅𝑒 = 500 and 𝑅𝑒 = 750, the vortex shedding process is asymmetric, which results not only in a non-zero lift coefficient, but in an asymmetric temperature field in the wake of the sphere at 𝑃 𝑟 ≥ 0.1. The dual asymmetry in the flow and the convective heat transfer is smooth out when the Prandtl number reaches 𝑃 𝑟 = 0.01 as the heat diffusion dominates and asymmetries in the vortex formation zone are no longer relevant in the heat transport. The descend in Prandtl number also produces an attenuation of the temperature fluctuations and thereby, in the turbulent heat transfer. As a direct consequence, two factors emerge at 𝑃 𝑟 = 0.01: (1) a lower decay ratio of the temperature in the wake centreline, and (2) a larger wake spread compared to higher Prandtl numbers., This work has been partially financially supported by the Ministerio de Ciencia e Innovación, Spain (Ref. PID2020-116937RB-C22). We also acknowledge Red Española de Surpercomputación (RES) for awarding us access to the MareNostrum IV machine based in Barcelona, Spain (Ref. IM-2020-2-0013)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Turbulent statistics and coherent structures in an asymmetrically heated channel flow

  • García Berenguer, Marina|||0000-0003-4324-3427
  • Gasparino, Lucas
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
A compressible direct numerical simulation (DNS) has been conducted to analyze the behavior of a fully developed turbulent channel flow. The problem has been set at mean friction Reynolds number Ret m = 400 submitted to a high-temperature gradient between the two walls (Thot/Tcold = 2)., This work has been partially financially supported by the Ministerio de Economía y Competitividad, Secretaría de Estadod e Investigación, Desarrollo e Innovación, Spain (ref. PID2020-116937RB-C21 and PID2020-116937RB-C22). We also acknowledge Red Española de Supercomputación (RES) for awarding access to the MareNostrum IV machine based in Barcelona, Spain (IM-2022-3-0010)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On the flow past a three-element wing: mean flow and turbulent statistics

  • Montalà Sales, Ricard|||0009-0000-7911-7102
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
Large eddy simulations (LES) on the flow past the 30P30N three-element high-lift wing at a moderate Reynolds number Rec = 750, 000 and three different angles of attack α = 5, 9 and 23° are conducted. The main focus is on the time-averaged statistics of the turbulent flow. The form drag noticeably increases with the angle of attack, while viscous drag remains roughly constant and contributes minimally to the total drag. This is associated with the significant pressure peaks found in the main element with increasing angles of attack and hence, the development of stronger adverse pressure gradients. At α = 23° , this leads to the development of a prominent wake downstream this element that eventually evolves into a visible recirculation region above the flap, indicating the onset of stall conditions. In the flap, strong adverse pressure gradients are observed at small angles of attack instead, i.e., α = 5 and 9° . This is attributed to the flap’s deflection angle with respect to the main wing, which causes a small separation of the boundary layer as the flow approaches the trailing edge. At the stall angle of attack, i.e., α = 23°, the spread of the main element wake maintains attached the flow near the flap wall, thus mitigating the pressure gradient there and preventing the flow to undergo separation. The shear layers developed on the slat and main coves are also analysed, with the slat shear layer showing more prominence. In the slat, its size and intensity noticeably decrease with the angle of attack as the stagnation point moves towards the slat cusp. Conversely, the size of the shear layer developed in the main element cavity remains approximately constant regardless of the angle of attack. At the lower angles of attack, i.e., α = 5 and 9°, the development of the shear layer is anticipated by the turbulent separation of the flow along the pressure side of the main wing, leading to increased levels of turbulence downstream. At the higher angle of attack, i.e., α = 23° , the shear layer is originated by the cavity separation and transition to turbulence occurs within the cavity., Partial financial support was received from the Ministerio de Ciencia e Innovación of Spain (PID2020-116937RB-C21 and PID2020-116937RB-C22). The work of some of the authors is supported by the grants FI-SDUR (2022 FISDU 00066) and Ramon y Cajal (RYC2018-025949-I). Research groups Large-scale Computational Fluid Dynamics and Turbulence and Aerodynamics Research Group received financial support by the SGR grants of the Departament de Recerca i Universitats of the Generalitat de Catalunya (2021 SGR 00902 and 2021 SGR 01051, respectively)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Large-scale coherent structures in an asymmetrically heated channel flow

  • García Berenguer, Marina|||0000-0003-4324-3427
  • Silva, Lucas Gasparino Ferreira da
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
A compressible direct numerical simulation (DNS) has been conducted to analyze the behavior of low-speed flows submitted to a strong temperature gradient in a fully developed and asymmetrically heated turbulent channel flow. The focus is to understand the relevance of the variable thermophysical properties and their impact on the heat transfer mechanisms. The simulations have been performed at mean friction Reynolds number Ret m = 400 submitted to a high-temperature ratio between the two walls (Thot/Tcold = 2). The results show an increased flow mixing and recirculation due to the temperature difference between the walls., This work has been partially financially supported by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (ref. PID2020-116937RB-C21 and PID2020-116937RB-C22). We also acknowledge Red Española de Supercomputación (RES) for awarding access to the MareNostrum IV machine based in Barcelona, Spain (IM-2022-3-0010). The corresponding first author gratefully acknowledges the Universitat Politècnica de Catalunya and the Banco Santander for the financial support of her predoctoral grant FPI- UPC., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Wall resolved large eddy simulations of a three-element high-lift airfoil at different angles of attack

  • Montalà Sales, Ricard|||0009-0000-7911-7102
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
A parametric study of the flow past the 30P30N three-element high-lift wing is conducted by changing the angle of attack (α = 5, 9 and 23◦) at a constant Reynolds number (Rec = 750, 000). Computational predictions are performed employing wallresolved large eddy simulations with the aim to address the flow dynamics around this geometry, detect how the main flow features evolve as the angle of attack is increased and discuss which are the main mechanisms that contribute to drag and noise., This work has been partially financially supported by the Ministerio de Ciencia e Innovación of Spain (PID2020-116937RB-C21 and PID2020-116937RBC22). Moreover, the simulations were run thanks to the Red Española de Supercomputación (RES) and the EuroHPC JU, who awarded us with computational hours in the HPC facilities of MareNorstum IV at Barcelona Supercomputing Center (Ref IM-2022-3- 0005) and Vega at Institute of Information Science (ID EHPC-REG- 2022R01-030), respectively. Last but not least, R. Montalà acknowledges the support of Departament de Recerca i Universitats de la Generalitat de Catalunya, who awarded him with the FI-SDUR grant to carry out his PhD studies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Large eddy simulations (LES) of a three-element high-lift wing: Exploring the active flow control (AFC) capabilities

  • Montalà Sales, Ricard|||0009-0000-7911-7102
  • Lehmkuhl Barba, Oriol|||0000-0002-2670-1871
  • Rodríguez Pérez, Ivette María|||0000-0002-3749-277X
This study presents an aerodynamic analysis of the 30P30N high-lift three-element wing under varying the angle of attack (α = 5°, 9°, and 23°) at a constant Reynolds number (Rec = 750, 000) by means of large eddy simulations (LES). Baseline results were validated against existing literature, demonstrating good agreement. The increase of the angle of attack entails higher values of lift but also, increased values of drag. At α = 23°, a recirculation area appears above the flap, this being the signature of the stall conditions. This is related to the adverse pressure gradient that develops along the main suction side and the separation of the streamlines in its wake. Actuation strategies using synthetic jets were explored to mitigate this flow separation at this angle of attack, and thus, enhance the efficiency of the wing. Three actuation cases with the jets located on the main wing, on the flap, and on both elements at the same time were investigated. While some improvements are observed with the actuation, particularly in the combined actuation case, the overall wing efficiency was only marginally enhanced. Challenges in achieving significant improvements were attributed to complex flow interactions and the dominance of pressure forces, which affect both the lift and the drag coefficients at the same time., This research has received financial support from the Ministerio de Ciencia e Innovación of Spain (PID2020- 116937RB-C21 and PID2020-116937RB-C22). Simulations were conducted with the assistance of the EuroHPC JU, who granted computational resources to the HPC facility of Vega, at Institute of Information Science (EHPC-REG2022R01-030). Ricard Montala work is funded by a FI-SDUR grant (2022 FISDU 00066) from the Departament de Recerca i Universitats de la Generalitat de Catalunya. Oriol Lehmkuhl has been partially supported by a Ramon y Cajal postdoctoral contract (RYC2018-025949-I). The authors also acknowledge the support of the Departament de Recerca i Universitats de la Generalitat de Catalunya through the research group Large-scale Computational Fluid Dynamics (2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (2021 SGR 01051)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the wake dynamics of an oscillating cylinder via proper orthogonal decomposition

  • Eiximeno Franch, Benet
  • Miró Jané, Arnau
  • Cajas García, Juan Carlos
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
The coherent structures and wake dynamics of a two-degree-of-freedom vibrating cylinder with a low mass ratio at Re=5300 are investigated by means of proper orthogonal decomposition (POD) of a numerical database generated using large-eddy simulations. Two different reduced velocities of U*=3.0 and U*=5.5, which correspond with the initial and super-upper branches, are considered. This is the first time that this kind of analysis is performed in this kind of system in order to understand the role of large coherent motions on the amplification of the forces. In both branches of response, almost 1000 non-correlated in-time velocity fields have been decomposed using the snapshot method. It is seen that a large number of modes is required to represent 95% of the turbulent kinetic energy of the flow, but the first two modes contain a large percentage of the energy as they represent the wake large-scale vortex tubes. The energy dispersion of the high-order modes is attributed to the cylinder movement in the inline and cross-stream directions. Substantially different POD modes have been found in the two branches. While the first six modes resemble those observed in the static cylinder or in the initial branch of a one-degree of freedom cylinder in the initial branch, the modes not only contain information about the wake vortexes in the super-upper branch but also about the formation of the 2T vortex pattern and the Taylor–Görtler structures. It is shown that the 2T vortex pattern is formed by the interplay between the Taylor–Görtler stream-wise vortical structures and the cylinder movement and is responsible for the increase in the lift force and larger elongation in the super-upper branch., This work has been partially financially supported by the Ministerio de Economía, Industria y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (Ref. PID2020-116937RB-C21, PID2020-116937RB-C22), and by the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 956104. The JU receives support from the European Union’s Horizon 2020 research and innovation programme and Spain, France, Germany. O. Lehmkuhl work is financed by a Ramón y Cajal postdoctoral contract by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (RYC2018-025949-I)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical investigation of forced convection heat transfer from a sphere at low Prandtl numbers

  • Rodríguez Pérez, Ivette María
  • Campo, Antonio
Direct numerical simulations of the flow and forced convective heat transfer around a sphere at Reynolds numbers between 𝑅𝑒 = 500 and 𝑅𝑒 = 1000 are performed. We investigate the effects of the Prandtl number (𝑃 𝑟) on the forced convective heat transfer from a sphere for various fluids having 𝑃 𝑟 = 0.01, 0.1, 0.7. At the larger Prandtl number, the convective transport due to the vortex shedding process dominates over the diffusive transport. As the Prandtl number decreases, diffusive effects become important. Moreover, the thermal boundary layer increases with decrements of the Prandtl number, which results in a reduction in the local and mean non-dimensional heat transfer coefficient. It is seen that at 𝑅𝑒 = 500 and 𝑅𝑒 = 750, the vortex shedding process is asymmetric, which results not only in a non-zero lift coefficient, but in an asymmetric temperature field in the wake of the sphere at 𝑃 𝑟 ≥ 0.1. The dual asymmetry in the flow and the convective heat transfer is smooth out when the Prandtl number reaches 𝑃 𝑟 = 0.01 as the heat diffusion dominates and asymmetries in the vortex formation zone are no longer relevant in the heat transport. The descend in Prandtl number also produces an attenuation of the temperature fluctuations and thereby, in the turbulent heat transfer. As a direct consequence, two factors emerge at 𝑃 𝑟 = 0.01: (1) a lower decay ratio of the temperature in the wake centreline, and (2) a larger wake spread compared to higher Prandtl numbers., This work has been partially financially supported by the Ministerio de Ciencia e Innovación, Spain (Ref. PID2020-116937RB-C22). We also acknowledge Red Española de Surpercomputación (RES) for awarding us access to the MareNostrum IV machine based in Barcelona, Spain (Ref. IM-2020-2-0013)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Compressibility effects on the wake dynamics of a circular cylinder

  • Rodríguez Pérez, Ivette María
  • Eiximeno Franch, Benet
  • Gasparino, Lucas
  • Tur Monge, Carlos
  • Muela Castro, Jordi
  • Lehmkuhl Barba, Oriol
Compressible large-eddy simulations of the flow past a circular cylinder at Reynolds numbers Re = 104 and Mach numbers in the range M = 0.2-1.2 are performed. Changes in the wake dynamics, coherent structures and flow topology brought about compressibility effects are discussed and analysed in detail., This work has been partially financially supported by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (ref. PID2020-116937RB-C21 and PID2020-116937RB-C22). O.L. has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018-025949-I). I.R. also acknowledges fundings by AGAUR (Ref. 2021 SGR 01051)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Turbulent boundary layer in a 3-element high-lift wing: coherent structures identification

Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Differentially heated turbulent channel flow two-point correlations

  • García Berenguer, Marina
  • Silva, Lucas Gasparino Ferreira da
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
This study analyzes the behavior of a differentially heated channel flow by means of a direct numerical simulations (DNS) with variable thermophysical properties under low-speed conditions focusing on the impact of the temperature gradient on the turbulence structures near the channel walls. The simulations were conducted at a mean friction Reynolds number of Retm = 400 with a temperature ratio between the walls of Thot/Tcold = 2. Results show significant differences between the hot and cold walls that lead to an increased heat transfer at the hot wall and a higher turbulent production in the cold wall., This work has been partially financially supported by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (ref. PID2020116937RB-C21 and PID2020-116937RB-C22). The corresponding first author gratefully acknowledges the Universitat Politècnica de Catalunya and the Banco Santander for the financial support of her predoctoral grant FPI-UPC., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Numerical study of the flow past a three-element high-lift airfoil at different angles of attack

  • Montalà Sales, Ricard
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
A parametric study of the 30p30n three-element high-lift airfoil is conducted by changing the angle of attack at α = 5, 9 and 23◦ at a constant Reynolds number of Rec = 750, 000. Computational predictions are performed employing large eddy simulations., This work has been partially financially supported by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (ref. PID2020-116937RB-C21 and PID2020-116937RB-C22). We also acknowledge Red Española de Surpercomputación (RES) for awarding us access to the MareNostrum IV machine based in Barcelona, Spain (Ref IM-2022-3-0005); as well as the HPC RIVR consortium (www.hpc-rivr.si) and EuroHPC JU (eurohpc-ju.europa.eu under the project ID EHPC-REG-2022R01-030) for funding this research by providing computing resources of the HPC system Vega at the Institute of Information Science (www.izum.si). R. Montalà acknowledges support of Departament de Recerca i Universitats de la Generalitat de Catalunya through a FI-SDUR graduate fellowship program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hybrid computation of the aerodynamic noise radiated by the wake of a subsonic cylinder

  • Eiximeno Franch, Benet
  • Tur Monge, Carlos
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
The noise radiated by the flow around a cylinder in the subcritical regime at 𝑅𝑒𝐷=1×104 and at a subsonic Mach number of 𝑀=0.5 is here studied. The aerodynamic sound radiated by a cylinder has been studied with a wide range of Reynolds numbers, but there are no studies about how the Mach number affects the acoustic field in the subsonic regime. The flow field is resolved by means of large-eddy simulations of the compressible Navier–Stokes equations. For the study of the noise propagation, formulation 1C of the Ffowcs Williams–Hawkings analogy is used. The fluid flow results show good agreement when comparing the surface pressure coefficient, the recirculation length, the vortex shedding frequency and the force coefficients against other studies performed under similar conditions. The dynamic mode decomposition of the pressure fluctuations is used to relate them with the far-field noise. It is shown that, in contrast to what happens for low Mach numbers, quadrupoles have a significant impact mainly in the observers located in the streamwise direction. This effect leads to a global monopole directivity pattern as the shear fluctuations compensate for the lower value of the aeolian tone away from the cross-stream direction., This work was partially financially supported by the Ministerio de Economía, Industria y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (refs PID2020-116937RB-C21 and PID2020-116937RB-C22). B. Eiximeno’s work was funded by a contract from the Subprograma de Ayudas Predoctorales given by the Ministerio de Ciencia e Innovación (PRE2021-096927). O. Lehmkuhl’s work was financed by a Ramón y Cajal postdoctoral contract from the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (RYC2018-025949-I)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Toward the usage of deep learning surrogate models in ground vehicle aerodynamics

  • Eiximeno Franch, Benet
  • Miró Jané, Arnau
  • Rodríguez Pérez, Ivette María
  • Lehmkuhl Barba, Oriol
This study introduces a deep learning surrogate model designed to predict the evolution of the mean pressure coefficient on the back face of a Windsor body across a range of yaw angles from 2.5◦ to 10◦ . Utilizing a variational autoencoder (VAE), the model effectively compresses snapshots of back pressure taken at yaw angles of 2.5◦, 5◦, and 10◦ into two latent vectors. These snapshots are derived from wall-modeled large eddy simulations (WMLESs) conducted at a Reynolds number of ReL = 2.9 × 106. The frequencies that dominate the latent vectors correspond closely with those observed in both the drag’s temporal evolution and the dynamic mode decomposition. The projection of the mean pressure coefficient to the latent space yields an increasing linear evolution of the two latent variables with the yaw angle. The mean pressure coefficient distribution at a yaw angle of 7.5◦ is predicted with a mean error of e = 3.13% when compared to the WMLESs results after obtaining the values of the latent space with linear interpolation., The research leading to this work has been partially funded by the European Project NextSim, which has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 956104 and cofounded by the Spanish Agencia Estatal de Investigacion (AEI) under grant agreement PCI2021-121962. This work was partially financially supported by the Ministerio de Economía, Industria, y Competitividad, as well as the Secretaría de Estado de Investigación, Desarrollo, e Innovación in Spain (refs PID2020-116937RB-C21 and PID2020-116937RB-C22). B. Eiximeno’s work was funded by a contract from the Subprograma de Ayudas Predoctorales given by the Ministerio de Ciencia e Innovación (PRE2021-096927). Oriol Lehmkuhl has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018-025949-I). The authors acknowledge the support of the Departament de Recerca i Universitats de la Generalitat de Catalunya through the research group Large-scale Computational Fluid Dynamics (Code: 2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (Code: 2021 SGR 01051)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Data-driven wall modeling for LES involving non-equilibrium boundary layer effects

  • Radhakrishnan, Sarath
  • Calafell Sandiumenge, Joan
  • Miró Jané, Arnau
  • Font García, Bernat
  • Lehmkuhl Barba, Oriol
Purpose Wall-modeled large eddy simulation (LES) is a practical tool for solving wall-bounded flows with less computational cost by avoiding the explicit resolution of the near-wall region. However, its use is limited in flows that have high non-equilibrium effects like separation or transition. This study aims to present a novel methodology of using high-fidelity data and machine learning (ML) techniques to capture these non-equilibrium effects. Design/methodology/approach A precursor to this methodology has already been tested in Radhakrishnan et al. (2021) for equilibrium flows using LES of channel flow data. In the current methodology, the high-fidelity data chosen for training includes direct numerical simulation of a double diffuser that has strong non-equilibrium flow regions, and LES of a channel flow. The ultimate purpose of the model is to distinguish between equilibrium and non-equilibrium regions, and to provide the appropriate wall shear stress. The ML system used for this study is gradient-boosted regression trees. Findings The authors show that the model can be trained to make accurate predictions for both equilibrium and non-equilibrium boundary layers. In example, the authors find that the model is very effective for corner flows and flows that involve relaminarization, while performing rather ineffectively at recirculation regions. Originality/value Data from relaminarization regions help the model to better understand such phenomenon and to provide an appropriate boundary condition based on that. This motivates the authors to continue the research in this direction by adding more non-equilibrium phenomena to the training data to capture recirculation as well., SR acknowledges the financial support of the Ministerio de Ciencia y Innovación y Universidades, for the grant, Ayudas para contratos predoctorales para la formación de doctors (Ref: BES-2017081982). OL has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018025949-I). This work was partially supported by the Ministerio de Economía, Industria y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (refs: PID2020-116937RB-C21 and PID2020-116937RB-C22). The authors also acknowledge the Barcelona Supercomputing Center for awarding us access to the MareNostrum IV machine based in Barcelona, Spain., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Turbulent boundary layer in a 3-element high-lift wing: coherent structures identification

  • Montalà Sales, Ricard
  • Eiximeno Franch, Benet
  • Miró Jané, Arnau
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
A large eddy simulation (LES) of the flow past a 30P30N high-lift three-element wing is performed at the angle of attack AoA = 9º and a Reynolds number of Re = 750,000, based on the nested chord. Results are validated against experimental data available in the literature, proving their reliability. The present work is focused on the boundary layer development along the main suction side, including the analysis of the evolution of the thickness, the friction Reynolds number, the shape factor and the Clauser pressure-gradient parameter, as well as the Reynolds stresses at given chord locations. Finally, a proper orthogonal decomposition (POD) is performed, which allows visualizing the main turbulent coherent structures present in a turbulent boundary layer., This work is partially financed by the Ministerio de Ciencia e Innovación of Spain (Ref. PID2020-116937RB-C21 / -C22). We also acknowledge the Red Española de Surpercomputación (RES) and the EuroHPC JU for granting us access to the MareNostrum IV machine based in Barcelona Supercomputing Center (Ref. IM-2022-3-0005) and to the HPC system Vega at the Institute of Information Science (Ref. EHPC-REG-2022R01-030), respectively. Finally, R. Montalá acknowledges the support of Departament de Recerca i Universitats de la Generalitat de Catalunya through a FI-SDUR graduate fellowship program., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the dynamics of the turbulent flow past a three-element wing

  • Montalà Sales, Ricard
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
A comprehensive analysis of the unsteady flow dynamics past the 30P30N three-element high lift wing is performed by means of large eddy simulations at different angles of attack (AoA=5°, 9°, and 23°) and at a Reynolds number of Rec=750.000 (based on the nested chord). Results are compared with experimental and numerical investigations, showing a quantitatively good agreement and, thus, proving the reliability and accuracy of the present simulations. Within the slat and main coves, large recirculation bubbles are bounded by shear layers, where the onset of turbulence is triggered by Kelvin–Helmholtz instabilities. In the energy spectrum of the velocity fluctuations, the footprint of these instabilities is detected as a broadband peak; its frequency being moved toward lower values as the angle of attack increases. Kelvin–Helmholtz vortices roll-up and break down into small scales that eventually impinge into the slat and main coves lower surfaces. The slat impingement shows to be more prominent, and hence, larger velocity and pressure fluctuations are observed. The impingement strength diminishes with the angle of attack in both coves, while higher fluctuations are originated on the slat and main respective suction sides, leading to larger boundary layers. This is associated with the displacement of the stagnation point with the angle of attack. Another salient feature observed is the laminar-to-turbulent flow transition in the main and flap leading edges although the average location of this transition seems to not be affected by the angle of attack. Tollmien–Schlichting instabilities precede this transition, with the disturbances amplified by the inviscid mode at low angles of attack, while at AoA=23°, the local Reynolds number on the main suction side is incremented and the viscous mode becomes important. The analysis shows that the turbulent wake formed at the trailing edge of all elements dominates the dynamics downstream. This is especially true at the higher angle of attack, where a large region of velocity deficit above the flap is observed, thus indicating the onset of stall conditions., This research has received financial support from the Ministerio de Ciencia e Innovación of Spain (Nos. PID2020-116937RB-C21 and PID2020-116937RB-C22). Furthermore, simulations were conducted with the assistance of the Red Española de Supercomputación (RES) and the EuroHPC JU, who granted us computational resources at the HPC facilities of MareNostrum IV, at Barcelona Supercomputing Center (IM-2022-3-0005), and Vega, at Institute of Information Science (REG- 2022R01-030), respectively. Finally, R. Montalà would like to express gratitude to the Departament de Recerca i Universitats de la Generalitat de Catalunya for awarding the FI-SDUR grant (No. 2022 FISDU 00066), which supports his doctoral studies., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Large-scale coherent structures in an asymmetrically heated channel flow

  • García Berenguer, Marina
  • Silva, Lucas Gasparino Ferreira da
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
A compressible direct numerical simulation (DNS) has been conducted to analyze the behavior of low-speed flows submitted to a strong temperature gradient in a fully developed and asymmetrically heated turbulent channel flow. The focus is to understand the relevance of the variable thermophysical properties and their impact on the heat transfer mechanisms. The simulations have been performed at mean friction Reynolds number Ret m = 400 submitted to a high-temperature ratio between the two walls (Thot/Tcold = 2). The results show an increased flow mixing and recirculation due to the temperature difference between the walls., This work has been partially financially supported by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (ref. PID2020-116937RB-C21 and PID2020-116937RB-C22). We also acknowledge Red Española de Supercomputación (RES) for awarding access to the MareNostrum IV machine based in Barcelona, Spain (IM-2022-3-0010). The corresponding first author gratefully acknowledges the Universitat Politècnica de Catalunya and the Banco Santander for the financial support of her predoctoral grant FPI- UPC., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

PyLOM: A HPC open source reduced order model suite for fluid dynamics applications

  • Eiximeno Franch, Benet
  • Miró Jané, Arnau
  • Begiashvili, Beka
  • Valero Sanchez, Eusebio
  • Rodríguez Pérez, Ivette María
  • Lehmkuhl Barba, Oriol
This paper describes the numerical implementation in a high-performance computing environment of an open-source library for model order reduction in fluid dynamics. This library, called pyLOM, contains the algorithms of proper orthogonal decomposition (POD), dynamic mode decomposition (DMD) and spectral proper orthogonal decomposition (SPOD), as well as, efficient SVD and matrix-matrix multiplication, all of them tailored for supercomputers. The library is profiled in detail under the MareNostrum IV supercomputer. The bottleneck is found to be in the QR factorization, which has been solved by an efficient binary tree communications pattern. Strong and weak scalability benchmarks reveal that the serial part (i.e., the part of the code that cannot be parallelized) of these algorithms is under 10% for the strong scaling and under 0.7% for the weak scaling. Using pyLOM, a POD of a dataset containing 1.14 × 10sup8 gridpoints and 1808 snapshots that takes 6.3Tb of memory can be computed in 81.08 seconds using 10368 CPUs. Additioally, the algorithms are validated using the datasets of a flow around a circular cylinder at ReD = 100 and ReD = 1 × 10sup4 , as well as the flow in the Stanford diffuser at Reh = 1 × 10sup4 ., The research leading to this work has been partially funded by the European Project NextSim which has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 956104 and co-founded by the Spanish Agencia Estatal de Investigación (AEI) under grant agreements PCI2021-121962 and PCI2021-121937. This work was partially financially supported by the Ministerio de Economía, Industria y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (refs PID2020-116937RB-C21 and PID2020-116937RB-C22). B. Eiximeno’s work was funded by a contract from the Subprograma de Ayudas Predoctorales given by the Ministerio de Ciencia e Innovación (PRE2021-096927). Oriol Lehmkuhl has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018-025949-I). The authors acknowledge the support of Departament de Recerca i Universitats de la Generalitat de Catalunya to the Research Group Large-scale Computational Fluid Dynamics (Code: 2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (Code: 2021 SGR 01051). We also acknowledge the Barcelona Supercomputing Center for awarding us access to the MareNostrum IV machine based in Barcelona, Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Self-induced large-scale motions in a three-dimensional diffuser

  • Miró Jané, Arnau
  • Eiximeno Franch, Benet
  • Rodríguez Pérez, Ivette María
  • Lehmkuhl Barba, Oriol
A direct numerical simulation of a three-dimensional diffuser at Reynolds number Re = 10,000 (based on inlet bulk velocity) has been performed using a low-dissipation finite element code. The geometry chosen for this work is the Stanford diffuser, introduced by Cherry et al. (Int. J. Heat Fluid Flow 29:803–811, 2008). Results have been exhaustively compared with the published data with a quite good agreement. Additionally, further turbulent statistics have been provided such as the Reynolds stresses or the turbulent kinetic energy. A proper orthogonal decomposition and a dynamic mode decomposition analyses of the main flow variables have been performed to identify the main characteristics of the large-scale motions. A combined, self-induced movement of the large-scales has been found to originate in the top-right expansion corner with two clear features. A low-frequency diagonal cross-stream travelling wave first reported by Malm et al. (J. Fluid Mech. 699:320–351, 2012), has been clearly identified in the spatial modes of the stream-wise velocity components and the pressure, associated with the narrow band frequency of St¿[0.083,0.01] . This movement is caused by the geometrical expansion of the diffuser in the cross-stream direction. A second low-frequency trait has been identified associated with the persisting secondary flows and acting as a back and forth global accelerating-decelerating motion located on the straight area of the diffuser, with associated frequencies of St<0.005 . The smallest frequency observed in this work has been St=0.0013 . This low-frequency observed in the Stanford diffuser points out the need for longer simulations in order to obtain further turbulent statistics., The research leading to this work has been partially funded by the European Project NextSim which has received funding from the European High-Performance Computing Joint Undertaking (JU) under grant agreement No 956104 and co-founded by the Spanish Agencia Estatal de Investigacion (AEI) under grant agreement PCI2021-121962. Benet Eiximeno also acknowledges the financial support by the Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (Refs: PID2020-116937RB-C21 and PID2020-116937RB-C22). Oriol Lehmkuhl has been partially supported by a Ramon y Cajal postdoctoral contract (Ref: RYC2018-025949-I). He also acknowledges the support of the European Project HiFi-TURB which has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814837. We also acknowledge the Barcelona Supercomputing Center for awarding us access to the MareNostrum IV machine based in Barcelona, Spain. The authors acknowledge the support of Departament de Recerca i Universitats de la Generalitat de Catalunya to the Research Group Large-scale Computational Fluid Dynamics (Code: 2021 SGR 00902)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Turbulent statistics and coherent structures in an asymmetrically heated channel flow

  • García Berenguer, Marina
  • Gasparino, Lucas
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
A compressible direct numerical simulation (DNS) has been conducted to analyze the behavior of a fully developed turbulent channel flow. The problem has been set at mean friction Reynolds number Ret m = 400 submitted to a high-temperature gradient between the two walls (Thot/Tcold = 2)., This work has been partially financially supported by the Ministerio de Economía y Competitividad, Secretaría de Estadod e Investigación, Desarrollo e Innovación, Spain (ref. PID2020-116937RB-C21 and PID2020-116937RB-C22). We also acknowledge Red Española de Supercomputación (RES) for awarding access to the MareNostrum IV machine based in Barcelona, Spain (IM-2022-3-0010)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Large eddy simulations (LES) of a three-element high-lift wing: Exploring the active flow control (AFC) capabilities

  • Montalà Sales, Ricard
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
This study presents an aerodynamic analysis of the 30P30N high-lift three-element wing under varying the angle of attack (α = 5°, 9°, and 23°) at a constant Reynolds number (Rec = 750, 000) by means of large eddy simulations (LES). Baseline results were validated against existing literature, demonstrating good agreement. The increase of the angle of attack entails higher values of lift but also, increased values of drag. At α = 23°, a recirculation area appears above the flap, this being the signature of the stall conditions. This is related to the adverse pressure gradient that develops along the main suction side and the separation of the streamlines in its wake. Actuation strategies using synthetic jets were explored to mitigate this flow separation at this angle of attack, and thus, enhance the efficiency of the wing. Three actuation cases with the jets located on the main wing, on the flap, and on both elements at the same time were investigated. While some improvements are observed with the actuation, particularly in the combined actuation case, the overall wing efficiency was only marginally enhanced. Challenges in achieving significant improvements were attributed to complex flow interactions and the dominance of pressure forces, which affect both the lift and the drag coefficients at the same time., This research has received financial support from the Ministerio de Ciencia e Innovación of Spain (PID2020- 116937RB-C21 and PID2020-116937RB-C22). Simulations were conducted with the assistance of the EuroHPC JU, who granted computational resources to the HPC facility of Vega, at Institute of Information Science (EHPC-REG2022R01-030). Ricard Montala work is funded by a FI-SDUR grant (2022 FISDU 00066) from the Departament de Recerca i Universitats de la Generalitat de Catalunya. Oriol Lehmkuhl has been partially supported by a Ramon y Cajal postdoctoral contract (RYC2018-025949-I). The authors also acknowledge the support of the Departament de Recerca i Universitats de la Generalitat de Catalunya through the research group Large-scale Computational Fluid Dynamics (2021 SGR 00902) and the Turbulence and Aerodynamics Research Group (2021 SGR 01051)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On the flow past a three-element wing: mean flow and turbulent statistics

  • Montalà Sales, Ricard
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
Large eddy simulations (LES) on the flow past the 30P30N three-element high-lift wing at a moderate Reynolds number Rec = 750, 000 and three different angles of attack α = 5, 9 and 23° are conducted. The main focus is on the time-averaged statistics of the turbulent flow. The form drag noticeably increases with the angle of attack, while viscous drag remains roughly constant and contributes minimally to the total drag. This is associated with the significant pressure peaks found in the main element with increasing angles of attack and hence, the development of stronger adverse pressure gradients. At α = 23° , this leads to the development of a prominent wake downstream this element that eventually evolves into a visible recirculation region above the flap, indicating the onset of stall conditions. In the flap, strong adverse pressure gradients are observed at small angles of attack instead, i.e., α = 5 and 9° . This is attributed to the flap’s deflection angle with respect to the main wing, which causes a small separation of the boundary layer as the flow approaches the trailing edge. At the stall angle of attack, i.e., α = 23°, the spread of the main element wake maintains attached the flow near the flap wall, thus mitigating the pressure gradient there and preventing the flow to undergo separation. The shear layers developed on the slat and main coves are also analysed, with the slat shear layer showing more prominence. In the slat, its size and intensity noticeably decrease with the angle of attack as the stagnation point moves towards the slat cusp. Conversely, the size of the shear layer developed in the main element cavity remains approximately constant regardless of the angle of attack. At the lower angles of attack, i.e., α = 5 and 9°, the development of the shear layer is anticipated by the turbulent separation of the flow along the pressure side of the main wing, leading to increased levels of turbulence downstream. At the higher angle of attack, i.e., α = 23° , the shear layer is originated by the cavity separation and transition to turbulence occurs within the cavity., Partial financial support was received from the Ministerio de Ciencia e Innovación of Spain (PID2020-116937RB-C21 and PID2020-116937RB-C22). The work of some of the authors is supported by the grants FI-SDUR (2022 FISDU 00066) and Ramon y Cajal (RYC2018-025949-I). Research groups Large-scale Computational Fluid Dynamics and Turbulence and Aerodynamics Research Group received financial support by the SGR grants of the Departament de Recerca i Universitats of the Generalitat de Catalunya (2021 SGR 00902 and 2021 SGR 01051, respectively)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Temperature gradient effects on a turbulent channel flow at Ret=400

  • García Berenguer, Marina
  • Gasparino, Lucas
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
A direct numerical simulation (DNS) of an asymmetrically heated turbulent channel flow has been performed to study the temperature gradient effects on the turbulence. The case has been set as a compressible flow with variable thermophisical properties at mean friction Reynolds number Retm = 400 submitted to a high-temperature gradient between the two walls (Thot /Tcold = 2). The behaviour differences between the walls of the channel are discussed., This work has been partially financially supported by the Ministerio de Economía y Competi- tividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain (ref. PID2020- 116937RB-C21 and PID2020-116937RB-C22). We also acknowledge Red Española de Super- computación (RES) for awarding access to the MareNostrum IV machine based in Barcelona, Spain (IM-2022-3-0010). The corresponding first author gratefully acknowledges the Universi- tat Politècnica de Catalunya and the Banco Santander for the financial support of her predoctoral grant FPI-UPC., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Wall resolved large eddy simulations of a three-element high-lift airfoil at different angles of attack

  • Montalà Sales, Ricard
  • Lehmkuhl Barba, Oriol
  • Rodríguez Pérez, Ivette María
A parametric study of the flow past the 30P30N three-element high-lift wing is conducted by changing the angle of attack (α = 5, 9 and 23◦) at a constant Reynolds number (Rec = 750, 000). Computational predictions are performed employing wallresolved large eddy simulations with the aim to address the flow dynamics around this geometry, detect how the main flow features evolve as the angle of attack is increased and discuss which are the main mechanisms that contribute to drag and noise., This work has been partially financially supported by the Ministerio de Ciencia e Innovación of Spain (PID2020-116937RB-C21 and PID2020-116937RBC22). Moreover, the simulations were run thanks to the Red Española de Supercomputación (RES) and the EuroHPC JU, who awarded us with computational hours in the HPC facilities of MareNorstum IV at Barcelona Supercomputing Center (Ref IM-2022-3- 0005) and Vega at Institute of Information Science (ID EHPC-REG- 2022R01-030), respectively. Last but not least, R. Montalà acknowledges the support of Departament de Recerca i Universitats de la Generalitat de Catalunya, who awarded him with the FI-SDUR grant to carry out his PhD studies., Peer Reviewed, Postprint (published version)