Pasar al contenido principal

TECNICAS DE MODELADO INTELIGENTE BASADO EN DATOS APLICADAS A INSTALACIONES INDUSTRIALES PARA LA MEJORA DE LA EFICIENCIA ENERGETICA

PID2020-117890RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE LEÓN

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Gap imputation in related multivariate time series through recurrent neural network-based denoising autoencoder

  • Alonso Castro, Serafín
  • Morán Álvarez, Antonio
  • Pérez López, Daniel
  • Prada Medrano, Miguel Ángel
  • Fuertes Martínez, Juan José
  • Domínguez González, Manuel
[EN] Technological advances in industry have made it possible to install many connected sensors, generating a great amount of observations at high rate. The advent of Industry 4.0 requires analysis capabilities of heterogeneous data in form of related multivariate time series. However, missing data can degrade processing and lead to bias and misunderstandings or even wrong decision-making. In this paper, a recurrent neural network-based denoising autoencoder is proposed for gap imputation in related multivariate time series, i.e., series that exhibit spatio-temporal correlations. The denoising autoencoder (DAE) is able to reproduce input missing data by learning to remove intentionally added gaps, while the recurrent neural network (RNN) captures temporal patterns and relationships among variables. For that reason, different unidirectional (simple RNN, GRU, LSTM) and bidirectional (BiSRNN, BiGRU, BiLSTM) architectures are compared with each other and to state-of-the-art methods using three different datasets in the experiments. The implementation with BiGRU layers outperforms the others, effectively filling gaps with a low reconstruction error. The use of this approach is appropriate for complex scenarios where several variables contain long gaps. However, extreme scenarios with very short gaps in one variable or no available data should be avoided. © 2024 - The authors. Published by IOS Press., SI, Grant PID2020-117890RB-I00 funded by MCIN/ AEI/10.13039/ 501100011033.
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Guidelines to develop demonstration models on industry 4.0 for engineering training

  • Fuertes Martínez, Juan José
  • González Herbón, Raúl
  • Rodríguez Ossorio, José Ramón
  • González Mateos, Guzmán
  • Alonso Castro, Serafín
  • Morán Álvarez, Antonio
[EN] Industrial digitization is currently a great challenge which involves continuous advances in tech-nologies such as automation, robotics, internet of things, cloud computing, big data, virtual and augmented reality or cybersecurity. Only those companies able to adapt and with qualified work-ers will be competitive. Therefore, it is necessary to design new environments to train students and workers in these enabling technologies. In this paper, a set of guidelines is proposed to develop a demonstration model on Industry 4.0. Following these guidelines, an existing manufacturing industrial system, based on an electro-pneumatic cell for classifying pieces, is updated to the Industry 4.0 paradigm. The result is an Industry 4.0 demonstration model where enabling tech-nologies are added in an integrated way. In this manner, students do not only train in each technology, but also understand the interactions between them. In the academic year 2020/21, this demonstration model has been used by engineering students in a subject of a master’s degree. Impressions and comments from students about the structure and management of the environ-ment, as well as the influence on their learning process are collected and discussed., SI, This work was supported by the Spanish State Research Agency, MCIN/AEI/10.13039/501100011033 under Grant PID2020-117890RB-I00. The work of José Ramón Rodríguez- Ossorio was supported by a grant of the Research Programme of the Universidad de León 2020. The work of Guzmán González-Mateos was supported by a grant of the Research Programme of the University of León 2021
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Environment for Education on Industry 4.0

  • Fuertes Martínez, Juan José
  • Prada Medrano, Miguel Ángel
  • Rodríguez Ossorio, José Ramón
  • González Herbón, Raúl
  • Pérez López, Daniel
  • Domínguez González, Manuel
[EN] A new industrial production model based on digitalization, system interconnection, virtualization and data exploitation, has emerged. Upgrade of production processes towards this Industry 4.0 model is one of the critical challenges for the industrial sector and, consequently, the training of students and professionals has to address these new demands. To carry out this task, it is essential to develop educational tools that allow students to interact with real equipment that implements, in an integrated way, new enabling technologies, such as connectivity with standard protocols, storage and data processing in the cloud, machine learning, digital twins and industrial cybersecurity measures. For that reason, in this work, we present an educational environment on Industry 4.0 that incorporates these technologies reproducing realistic industrial conditions. This environment includes cutting-edge industrial control system technologies, such as an industrial firewall and a virtual private network (VPN) to strengthen cybersecurity, an Industrial Internet of Things (IIoT) gateway to transfer process information to the cloud, where it can be stored and analyzed, and a digital twin that virtually reproduces the system. A set of hands-on tasks for an introductory automation course have been proposed, so that students acquire a practical understanding of the enabling technologies of Industry 4.0 and of its function in a real automation. This course has been taught in a master’s degree and students have assessed its usefulness by means of an anonymous survey. The results of the educational experience have been useful both from the students’ and faculty’s viewpoint., SI, This work was supported by the Spanish State Research Agency, MCIN/AEI/ 10.13039/501100011033 under Grant PID2020-117890RB-I00, and in part by the Spanish Committee of Automatic Control (CEA) and Siemens through its ‘‘Automation, Digitization and Industry 4.0’’ prize.
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

A PID Control Architecture Based on IEC 61499

  • González Mateos, Guzmán
  • Prada Medrano, Miguel Ángel
  • Morán Álvarez, Antonio
  • González Herbón, Raúl
  • Domínguez González, Manuel
[EN] This work presents an approach for PID control and optimization in a distributed system, using the IEC 61499 control standard. This standard enables communication among different PLCs, which are used to develop a three-layered event-driven control of a SISO loop. The lowest layer is in charge of cyclical data acquisition. The second layer carries out an event-based PID control. The highest layer runs a control optimization algorithm, specifically a simple tuning approach based on Ziegler-Nichols that is used to determine the PID parameters for different operating points. The proposed approach is assessed in a tank level SISO control problem, whose behavior can be modeled as a first-order plus dead time system in each operating point. For that purpose, it has been implemented using two PLCs and a software PLC running on an industrial computer. The experimental results on the SISO level control loop show the feasibility of the proposed approach for event-driven control in a distributed system and open interesting research questions in the intersection of controller design and distributed automation., SI, This work was supported by the Spanish State Research Agency, MCIN/ AEI/10.13039/501100011033 under Grant PID2020-117890RB-I00 and Grant PID2020-115401GB-I00. The work of Guzmán González-Mateos was supported by a grant from the 2022 Edition of Research Programme of the University of León., Agencia Estatal de Investigación
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Assessment and deployment of a LSTM-based virtual sensor in an industrial process control loop

  • González Herbón, Raúl
  • González Mateos, Guzmán
  • Rodríguez Ossorio, José Ramón
  • Prada Medrano, Miguel Ángel
  • Morán Álvarez, Antonio
  • Alonso Castro, Serafín
  • Fuertes Martínez, Juan José
  • Domínguez González, Manuel
[EN] Measurement of certain variables within the industrial sector remains a challenge due to the prohibitive costs of sensors, the intricate installation processes, or the continuous nature of production demands. Moreover, if a backup sensor is required in case the main sensor fails, the installation and maintenance difficulties are further increased. A possibility to address this issue is the indirect estimation of the desired variable by leveraging other correlated measures within the operational process. Data-driven techniques are well-suited for this aim, given their capacity to model potentially complex industrial processes. This paper proposes the implementation of a virtual flow sensor for its integration in the control loop of an industrial process. More specifically, four different data-driven methods have been tested to obtain the virtual sensor: multiple linear regression (MLR), multilayer perceptron (MLP), long-short term memory (LSTM) and deep long-short term memory (DeepLSTM). MAE, RMSE and have been chosen as evaluation metrics for model selection and testing. Furthermore, the robustness of the virtual flow sensor is not only evaluated under ideal operating conditions, but it is also tested under adverse conditions with various noise levels added to the measured signals. Additionally, the performance of the flow control loop using the real and virtual sensors is also evaluated in both ideal and adverse conditions. IAE, ITAE, and IAVU indices are used to assess the control performance. The results prove the robustness of the LSTM-based virtual flow sensor and the effectiveness of the control loop using it, avoiding the modification of the controller and interrupting the process when the real flow sensor fails., SI, Publicación en abierto financiada por el Consorcio de Bibliotecas Universitarias de Castilla y León (BUCLE), con cargo al Programa Operativo 2014ES16RFOP009 FEDER 2014-2020 DE CASTILLA Y LEÓN, Actuación:20007-CL - Apoyo Consorcio BUCLE
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Conditioned fully convolutional denoising autoencoder for multi-target NILM.

  • García Pérez, Diego
  • Pérez López, Daniel
  • Papapetrou, Panagiotis
  • Díaz Blanco, Ignacio
  • Cuadrado Vega, Abel Alberto
  • Enguita González, José María
  • Domínguez González, Manuel
[EN] Energy management requires reliable tools to support decisions aimed at optimising consumption. Advances in data-driven models provide techniques like Non-Intrusive Load Monitoring (NILM), which estimates the energy demand of appliances from total consumption. Common single-target NILM approaches perform energy disaggregation by using separate learned models for each device. However, the use of single-target systems in real scenarios is computationally expensive and can obscure the interpretation of the resulting feedback. This study assesses a conditioned deep neural network built upon a Fully Convolutional Denoising AutoEncoder (FCNdAE) as multi-target NILM model. The network performs multiple disaggregations using a conditioning input that allows the specification of the target appliance. Experiments compare this approach with several single-target and multi-target models using public residential data from households and nonresidential data from a hospital facility. Results show that the multi-target FCNdAE model enhances the disaggregation accuracy compared to previous models, particularly in non-residential data, and improves computational efficiency by reducing the number of trainable weights below 2 million and inference time below 0.25 s for several sequence lengths. Furthermore, the conditioning input helps the user to interpret the model and gain insight into its internal behaviour when predicting the energy demand of different appliances., SI, This work was supported by the Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación (MCIN/AEI/ 10.13039/501100011033) under grants PID2020- 115401GB-I00 and PID2020-117890RB-I00. Data were provided by Hospital of León and SUPPRESS Research Group of University of León within the project DPI2015- 69891-C2-1/2-R, Agencia Estatal de Investigación
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Adaptive model based on ESN for anomaly detection in industrial systems

  • Rodríguez Ossorio, José Ramón
  • Morán Álvarez, Antonio
  • Fuertes Martínez, Juan José
  • Prada Medrano, Miguel Ángel
  • Díaz, Ignacio
  • Domínguez González, Manuel
[EN]Modeling real industrial systems is a challenging task due to the complex nature of process data. Data-driven models commonly employ machine learning algorithms, but they often lack the ability to adapt to changes in the system over time. This paper proposes a method that uses Echo State Networks (ESN), a simplifed version of Recurrent Neural Networks (RNN), to model an industrial plant. The ESN model incorporates online adaptation to system changes and enables the visualisation of deviations or errors in the operation of the plant. This adaptive model acknowledges acceptable changes within the original system while identifying potential problems or errors. The advantage of this approach is that the same model can be applied to other systems with the same design, eliminating the need for algorithm retraining. Firstly, its successful ofine application in visualising anomalies applied to the reference plant is assessed. Secondly, the model is tested for online adaptation to changes in another plant with an identical design but slight diferences, while still observing the generated faults. Residual colour maps are used for the visualisation of anomalies., SI, Publicación en abierto financiada por el Consorcio de Bibliotecas Universitarias de Castilla y León (BUCLE), con cargo al Programa Operativo 2014ES16RFOP009 FEDER 2014-2020 DE CASTILLA Y LEÓN, Actuación:20007-CL - Apoyo Consorcio BUCLE
BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Reduced-order echo state networks for model predictive control in industrial applications

  • González Mateos, Guzmán
  • Prada Medrano, Miguel Ángel
  • Morán Álvarez, Antonio
  • Rodríguez Ossorio, José Ramón
  • Díaz, Ignacio
  • Domínguez González, Manuel
[EN] Model Predictive Control (MPC) is a powerful strategy for industrial process control, but its reliance on accurate dynamic models often poses computational challenges in data-driven implementations. Echo State Networks (ESNs), a type of Recurrent Neural Network (RNN), offer a promising solution due to their ability to capture nonlinear dynamics with simplified training. However, the high dimensionality of ESNs poses an obstacle for real-time implementations. Although recent works have studied the Proper Orthogonal Decomposition (POD) and Discrete Empirical Interpolation Method (DEIM) capabilities to reduce the order of ESNs, a systematic evaluation of these reduced models integrated into an MPC framework remains underexplored. In this paper, a comprehensive study of reduced-order ESN-MPC is presented, showing that the proposed approach maintains control accuracy while significantly reducing optimization time. The effectiveness of the approach is validated not only over simulated systems, but also in a real-world implementation of a quadruple-tank system. Additionally, some of the main problems associated with the application of DEIM are addressed., SI