Pasar al contenido principal

HACIA UN DISEÑO UNIFICADO DE UNA MANO ARTIFICIAL ASEQUIBLE Y VERSATIL VALIDA PARA USO PROTESICO Y EN ROBOTICA COLABORATIVA

PID2020-118021RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT JAUME I DE CASTELLO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling the Dynamics of Prosthetic Fingers for the Development of Predictive Control Algorithms

  • García-Ortíz, José Vicente
  • Mora, Marta C.
  • Cerdá Boluda, Joaquín|||0000-0002-6649-298X
[EN] In the field of biomechanical modeling, the development of a prosthetic hand with dexterity comparable to the human hand is a multidisciplinary challenge involving complex mechatronic systems, intuitive control schemes, and effective body interfaces. Most current commercial prostheses offer limited functionality, typically only one or two degrees of freedom (DoF), resulting in reduced user adoption due to discomfort and lack of functionality. This research aims to design a computationally efficient low-level control algorithm for prosthetic hand fingers to be able to (a) accurately manage finger positions, (b) anticipate future information, and (c) minimize power consumption. The methodology employed is known as model-based predictive control (MBPC) and starts with the application of linear identification techniques to model the system dynamics. Then, the identified model is used to implement a generalized predictive control (GPC) algorithm, which optimizes the control effort and system performance. A test bench is used for experimental validation, and the results demonstrate that the proposed control scheme significantly improves the prosthesis¿ dexterity and energy efficiency, enhancing its potential for daily use by people with hand loss., This research was funded by the Spanish Ministry of Economy, Industry and Competitiveness (Grant no: PID2020-118021RB-I00/AEI/10.13039/501100011033) and Universitat Jaume I (Grant no: UJI-B2022-48).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Grasp Pattern Recognition Using Surface Electromyography Signals and Bayesian-Optimized Support Vector Machines for Low-Cost Hand Prostheses

  • Grattarola, Alessandro
  • Mora, Marta C.
  • García Ortiz, José V.
  • Cerdá Boluda, Joaquín|||0000-0002-6649-298X
[EN] Every year, thousands of people undergo amputations due to trauma or medical conditions. The loss of an upper limb, in particular, has profound physical and psychological consequences for patients. One potential solution is the use of externally powered prostheses equipped with motorized artificial hands. However, these commercially available prosthetic hands are prohibitively expensive for most users. In recent years, advancements in 3D printing and sensor technologies have enabled the design and production of low-cost, externally powered prostheses. This paper presents a pattern-recognition-based human¿prosthesis interface that utilizes surface electromyography (sEMG) signals, captured by an affordable device, the Myo armband. A Support Vector Machine (SVM) algorithm, optimized using Bayesian techniques, is trained to classify the user¿s intended grasp from among nine common grasping postures essential for daily life activities and functional prosthetic performance. The proposal is viable for real-time implementations on low-cost platforms with 85% accuracy in grasping posture recognition., This research was funded by the Spanish Ministry of Economy, Industry and Competitiveness (Grant no: PID2020-118021RB-I00/AEI/10.13039/501100011033) and Universitat Jaume I (Grant no: UJI-B2022-48).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of Virtual Hands for Natural Interaction in the Metaverse

  • Cerdá Boluda, Joaquín|||0000-0002-6649-298X
  • Lloret Romero, María Nuria
  • Scarani, Stefano|||0000-0003-2366-8866
  • Sastre, Jorge|||0000-0002-8612-6717
  • Mora, Marta C.
[EN] The emergence of the Metaverse is raising important questions in the field of human-machine interaction that must be addressed for a successful implementation of the new paradigm. Therefore, the exploration and integration of both technology and human interaction within this new framework are needed. This paper describes an innovative and technically viable proposal for virtual shopping in the fashion field. Virtual hands directly scanned from the real world have been integrated, after a retopology process, in a virtual environment created for the Metaverse, and have been integrated with digital nails. Human interaction with the Metaverse has been carried out through the acquisition of the real posture of the user's hands using an infrared-based sensor and mapping it in its virtualized version, achieving natural identification. The technique has been successfully tested in an immersive shopping experience with the Meta Quest 2 headset as a pilot project, where a transactions mechanism based on the blockchain technology (non-fungible tokens, NFTs) has allowed for the development of a feasible solution for massive audiences. The consumers' reactions were extremely positive, with a total of 250 in-person participants and 120 remote accesses to the Metaverse. Very interesting technical guidelines are raised in this project, the resolution of which may be useful for future implementations., This research is part of the R+D project PID2020-118021RB-I00, funded by MICIN/AEI/10.13039/501100011033, and R+D project UJI-B2022-48 funded by University Jaume I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

sEMG-Based Robust Recognition of Grasping Postures with a Machine Learning Approach for Low-Cost Hand Control

  • Mora, Marta C.
  • García-Ortiz, José V.
  • Cerdá Boluda, Joaquín|||0000-0002-6649-298X
[EN] The design and control of artificial hands remains a challenge in engineering. Popular prostheses are bio-mechanically simple with restricted manipulation capabilities, as advanced devices are pricy or abandoned due to their difficult communication with the hand. For social robots, the interpretation of human intention is key for their integration in daily life. This can be achieved with machine learning (ML) algorithms, which are barely used for grasping posture recognition. This work proposes an ML approach to recognize nine hand postures, representing 90% of the activities of daily living in real time using an sEMG human-robot interface (HRI). Data from 20 subjects wearing a Myo armband (8 sEMG signals) were gathered from the NinaPro DS5 and from experimental tests with the YCB Object Set, and they were used jointly in the development of a simple multi-layer perceptron in MATLAB, with a global percentage success of 73% using only two features. GPU-based implementations were run to select the best architecture, with generalization capabilities, robustness-versus-electrode shift, low memory expense, and real-time performance. This architecture enables the implementation of grasping posture recognition in low-cost devices, aimed at the development of affordable functional prostheses and HRI for social robots., This research was funded by the Spanish Ministry of Economy, Industry and Competitiveness (Grant no: PID2020-118021RB-I00/AEI/10.13039/501100011033) and Universitat Jaume I (Grant no: UJI-B2022-48).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of Virtual Hands for Natural Interaction in the Metaverse

  • Cerdá-Boluda, Joaquín
  • Mora, Marta C
  • Lloret, Nuria
  • Scarani, Stefano
  • Sastre, Jorge
(This article belongs to the Special Issue Wearable Sensors for Gait and Motion Analysis)., The emergence of the Metaverse is raising important questions in the field of human-machine interaction that must be addressed for a successful implementation of the new paradigm. Therefore, the exploration and integration of both technology and human interaction within this new framework are needed. This paper describes an innovative and technically viable proposal for virtual shopping in the fashion field. Virtual hands directly scanned from the real world have been integrated, after a retopology process, in a virtual environment created for the Metaverse, and have been integrated with digital nails. Human interaction with the Metaverse has been carried out through the acquisition of the real posture of the user's hands using an infrared-based sensor and mapping it in its virtualized version, achieving natural identification. The technique has been successfully tested in an immersive shopping experience with the Meta Quest 2 headset as a pilot project, where a transactions mechanism based on the blockchain technology (non-fungible tokens, NFTs) has allowed for the development of a feasible solution for massive audiences. The consumers' reactions were extremely positive, with a total of 250 in-person participants and 120 remote accesses to the Metaverse. Very interesting technical guidelines are raised in this project, the resolution of which may be useful for future implementations., This research is part of the R+D project PID2020-118021RB-I00, funded by MICIN/AEI/10.13039/501100011033, and R+D project UJI-B2022-48 funded by University Jaume I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling the Dynamics of Prosthetic Fingers for the Development of Predictive Control Algorithms

  • García-Ortíz, José Vicente
  • Mora, Marta C.
  • Cerdá-Boluda, Joaquín
(This article belongs to the Special Issue Control, Modeling, Analysis, Optimization and Applications in Mechanical Engineering)., In the field of biomechanical modeling, the development of a prosthetic hand with dexterity comparable to the human hand is a multidisciplinary challenge involving complex mechatronic systems, intuitive control schemes, and effective body interfaces. Most current commercial prostheses offer limited functionality, typically only one or two degrees of freedom (DoF), resulting in reduced user adoption due to discomfort and lack of functionality. This research aims to design a computationally efficient low-level control algorithm for prosthetic hand fingers to be able to (a) accurately manage finger positions, (b) anticipate future information, and (c) minimize power consumption. The methodology employed is known as model-based predictive control (MBPC) and starts with the application of linear identification techniques to model the system dynamics. Then, the identified model is used to implement a generalized predictive control (GPC) algorithm, which optimizes the control effort and system performance. A test bench is used for experimental validation, and the results demonstrate that the proposed control scheme significantly improves the prosthesis’ dexterity and energy efficiency, enhancing its potential for daily use by people with hand loss., This research was funded by the Spanish Ministry of Economy, Industry and Competitiveness (Grant no: PID2020-118021RB-I00/AEI/10.13039/501100011033) and Universitat Jaume I (Grant no: UJI-B2022-48)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

sEMG-Based Robust Recognition of Grasping Postures with a Machine Learning Approach for Low-Cost Hand Control

  • Mora, Marta C.
  • García-Ortiz, José V
  • Cerdá-Boluda, Joaquín
The data presented in this study from the NinaPro Database are openly available at https://ninapro.hevs.ch/instructions/DB5.html (accessed on 21 March 2024). The data from UJIdb presented in this study are available upon request from the corresponding author., The design and control of artificial hands remains a challenge in engineering. Popular prostheses are bio-mechanically simple with restricted manipulation capabilities, as advanced devices are pricy or abandoned due to their difficult communication with the hand. For social robots, the interpretation of human intention is key for their integration in daily life. This can be achieved with machine learning (ML) algorithms, which are barely used for grasping posture recognition. This work proposes an ML approach to recognize nine hand postures, representing 90% of the activities of daily living in real time using an sEMG human-robot interface (HRI). Data from 20 subjects wearing a Myo armband (8 sEMG signals) were gathered from the NinaPro DS5 and from experimental tests with the YCB Object Set, and they were used jointly in the development of a simple multi-layer perceptron in MATLAB, with a global percentage success of 73% using only two features. GPU-based implementations were run to select the best architecture, with generalization capabilities, robustness-versus-electrode shift, low memory expense, and real-time performance. This architecture enables the implementation of grasping posture recognition in low-cost devices, aimed at the development of affordable functional prostheses and HRI for social robots., This research was funded by the Spanish Ministry of Economy, Industry and Competitiveness (Grant no: PID2020-118021RB-I00/AEI/10.13039/501100011033) and Universitat Jaume I (Grant no: UJI-B2022-48)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Grasp Pattern Recognition Using Surface Electromyography Signals and Bayesian-Optimized Support Vector Machines for Low-Cost Hand Prostheses

  • Grattarola, Alessandro
  • Mora, Marta C.
  • Cerdá-Boluda, Joaquín
  • García-Ortíz, José Vicente
This article belongs to the Special Issue Explainable Artificial Intelligence for Visualization in Human Computer Interactions., The data presented in this study belong to the NinaPro Database 5 and are openly available at https://ninapro.hevs.ch/instructions/DB5.html and at https://zenodo.org/record/1000116#.Xo4vZsgzZPY (accessed on 2 December 2024)., Every year, thousands of people undergo amputations due to trauma or medical conditions. The loss of an upper limb, in particular, has profound physical and psychological consequences for patients. One potential solution is the use of externally powered prostheses equipped with motorized artificial hands. However, these commercially available prosthetic hands are prohibitively expensive for most users. In recent years, advancements in 3D printing and sensor technologies have enabled the design and production of low-cost, externally powered prostheses. This paper presents a pattern-recognition-based human–prosthesis interface that utilizes surface electromyography (sEMG) signals, captured by an affordable device, the Myo armband. A Support Vector Machine (SVM) algorithm, optimized using Bayesian techniques, is trained to classify the user’s intended grasp from among nine common grasping postures essential for daily life activities and functional prosthetic performance. The proposal is viable for real-time implementations on low-cost platforms with 85% accuracy in grasping posture recognition., This research was funded by the Spanish Ministry of Economy, Industry and Competitiveness (Grant no: PID2020-118021RB-I00/AEI/10.13039/501100011033) and Universitat Jaume I (Grant no: UJI-B2022-48)., Peer reviewed