Pasar al contenido principal

SISTEMAS DE ALERTA TEMPRANA FRENTE A INUNDACIONES PLUVIALES EN ENTORNOS URBANOS

PID2020-118368RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DA CORUÑA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

Strategies for modelling roofs on large-scale urban drainage models focusing on data completeness

  • Montalvo Montenegro, Carlos Israel
  • Sañudo, Esteban
  • Cea, Luis
  • Chen, Albert S.
  • Puertas, Jerónimo
  • Evans, Barry
Preprint de: http://hdl.handle.net/2183/41334, [Abstract:] Impermeable surfaces such as roofs play a key role in urban pluvial floods due to the rapid transfer of rainfall to drainage networks, contributing to system overloading. This study proposes and evaluates different modelling strategies within large-scale urban drainage models, exploring simplified approaches for roof geometry and roof-to-manhole connections. The results indicate that, regardless of the methodology used to estimate roof width, the differences become negligible if the discharge point is distant. Additionally, for a contributing area of roofs discharging upstream to a manhole, the method of roof-to-manhole connection does not have a significant influence, which demonstrates the potential of these strategies to streamline the modelling process without compromising the reliability of the simulations. The findings highlight the feasibility of applying these modelling strategies in situations where data completeness is not feasible, offering a balanced solution between model complexity and accuracy., This project has received financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) within the project “SATURNO: Early warning against pluvial flooding in urban areas” (PID2020-118368RB-I00) and the FPI predoctoral grant from the Spanish Ministry of Science, Innovation, and Universities (PRE2021-098425). The contract of Esteban Sañudo is funded by the project “DRAIN - Digital RAIN. An Integrated Urban Drainage Model” (CPP2021-008756) funded by MICIU/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and the author also acknowledges the support of the INDITEX-UDC 2021 and 2022 Predoctoral Grants.
RUC. Repositorio da Universidade da Coruña
Publicación Tesis doctoral (DoctoralThesis)

Development of a Dual Drainage Model based on the Coupling of Iber and Swmm

  • Sañudo, Esteban
Tese por compendio de publicacións, [Abstract] Dual 2D/1D urban drainage models are presented as the most suitable tool for the calculation of urban floods, their management and the assessment of the associated risk. Their potential lies in the comprehensive modelling of urban hydrological processes, considering not only surface flows but also the dynamics within the drainage network. The thesis objective is the development of Iber-SWMM, a high-resolution dual 2D/1D urban drainage model that allows the fully coupled calculation of surface and drainage network flow during rainfall events, as well as the bidirectional exchange between both systems. The document includes: the development of the model by coupling the Iber (2D) and SWMM (1D) hydraulic computing engines; the realisation of experimental campaigns on a full-scale urban hydrology facility for model validation; the implementation of a numerical approach for the efficient modelling of hydrological processes on roofs; and, finally, the parallelisation of the code using high-performance computing (HPC) techniques to significantly reduce computational times. Iber-SWMM is conceived as a free tool with great potential, applicability and transferability to administrations and companies., [Resumen] Los modelos duales 2D/1D de drenaje urbano se presentan como la herramienta más adecuada para el cálculo de inundaciones urbanas, su gestión y la evaluación del riesgo asociado. Su potencialidad radica en una modelización integral de los procesos de la hidrología urbana considerando los flujos en la superficie, así como en la red de drenaje. La tesis tiene como objetivo el desarrollo de Iber-SWMM, un modelo dual 2D/1D de drenaje urbano de alta resolución que permite realizar de manera completamente acoplada el cálculo de flujo en superficie y en red durante episodios de lluvia, así como el intercambio bidireccional entre ambos sistemas. El documento incluye: el desarrollo del modelo acoplando los motores de cálculo hidráulico de Iber (2D) y SWMM (1D), la realización de campañas experimentales en una plataforma de hidrología urbana a escala real para la validación del modelo; la implementación de un enfoque numérico para la modelización eficiente de los procesos hidrológicos en los tejados y, finalmente, la paralelización del código utilizando técnicas de computación de alto rendimiento (HPC) que reduzcan los tiempos de cálculo de forma significativa. Iber-SWMM se concibe como una herramienta gratuita de gran potencial, aplicabilidad y transferible a administraciones y empresas., [Resumo] Os modelos duais 2D/1D de drenaxe urbana preséntanse como a ferramenta máis adecuada para o cálculo de inundacións urbanas, a súa xestión e a avaliación do risco asociado. A súa potencialidade radica nunha modelización integral dos procesos da hidroloxía urbana considerando os fluxos na superficie, así como na rede de drenaxe. A tese ten como obxectivo o desenvolvemento de Iber-SWMM, un modelo dual 2D/1D de drenaxe urbano de alta resolución que permite realizar de maneira completamente acoplada o cálculo de fluxo en superficie e en rede durante episodios de choiva, así como o intercambio bidireccional entre ambos sistemas. O documento inclúe: o desenvolvemento do modelo axustando os motores de cálculo hidráulico de Iber (2D) e SWMM (1D), a realización de campañas experimentais nunha plataforma de hidroloxía urbana a escala real para a validación do modelo; a implementación dun enfoque numérico para a modelización eficiente dos procesos hidrolóxicos nos tellados e, finalmente, a paralelización do código utilizando técnicas de computación de alto rendemento (HPC) que reduzan os tempos de cálculo de forma significativa. Iber-SWMM concíbese como unha ferramenta gratuíta de gran potencial, aplicabilidade e transferible a administracións e empresas., Por último, el autor ha participado en los siguientes proyectos internacionales y nacionales, que han proporcionado financiación para esta investigación: - “AA-FLOODS: Enhanced Prevention, Warning, Coordination, and Emergency Management Tools for Floods at Local Scales” (EAPA_45/2018) funded by the INTERREG ATLANTIC AREA program. - “SATURNO: Early Warning Against Pluvial Flooding in Urban Areas” (PID2020- 118368RB-I00) funded by the Spanish Ministry of Science, Innovation, and Universities (MCIN/AEI/10.13039/501100011033). - “DRAIN - Digital RAIN: An Integrated Urban Drainage Model” (CPP2021- 008756) funded by the Spanish Ministry of Science, Innovation, and Universities (MICIU/AEI/10.13039/501100011033) and by the European Union NextGenerationEU/PRTR.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Iber-PEST: Automatic calibration in fully distributed hydrological models based on the 2D shallow water equations

  • García-Alén, Gonzalo
  • Montalvo Montenegro, Carlos Israel
  • Cea, Luis
  • Puertas, Jerónimo
[Abstract]: Calibrating physically based hydrological models manually is time-consuming and challenging. Automatic calibration tools have become prevalent in these models; however, its effective use requires not only a deep knowledge of the calibration procedure itself, but also understanding the structure of the model input and output files. In this study, we introduce Iber-PEST, a novel framework combining the parameter estimation and uncertainty analysis package, PEST, with Iber, a 2D model based on the shallow water equations. We demonstrate its capabilities by successfully calibrating eight storm events in northwestern Spain's basins, achieving promising results (mean NSE equal to 0.84). Furthermore, by applying the iterative ensemble smoother included in PEST, we demonstrate the feasibility to use the calibration data generated by Iber-PEST with alternative PEST algorithms not directly integrated in the Iber-PEST framework. This work successfully addresses the significant implementation barrier associated with the automatic calibration of Iber hydrological models with PEST., Gonzalo García-Alén would like to express his gratitude for the invaluable knowledge gained during the PEST training course held in Bordeaux in April 2023, making special mention to the contributions of John Doherty and Alexandre Pryet. The attendance at the course was possible thanks to the support of Xunta de Galicia, Consellería de Cultura, Educación e Universidade under Project GRC-ED431C 2022/10 from “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas”. The authors acknowledge the support of Augas de Galicia and the Galicia Meteorological Agency (Metogalicia). This study was received financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) within the project “SATURNO: Early warning against pluvial flooding in urban areas” (PID 2020-118368RB-I00). Funding for open access charge: Universidade da Coruña/CISUG., Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, Xunta de Galicia; ED431C 2022/10
RUC. Repositorio da Universidade da Coruña
Publicación Reseña (Review)

Recent Advances and Future Challenges in Urban Pluvial Flood Modelling

  • Cea, Luis
  • Sañudo, Esteban
  • Montalvo Montenegro, Carlos Israel
  • Farfán-Durán, Juan F.
  • Puertas, Jerónimo
  • Tamagnone, Paolo
[Abstract]: Urban pluvial floods are characterised by a number of features such as the high spatial and temporal resolution needed to capture their dynamics, the complexity of dual drainage systems and the lack of sewer data availability, which make them very different from other types of floods, like coastal or fluvial floods, and which increase the difficulty of modelling them. As a consequence, most flood management plans do not include a rigorous evaluation of urban pluvial flood risk. In this paper, we give a comprehensive view of the current state of urban pluvial flood modelling, not restricted to a mere description of the mathematical approaches, but also including the most relevant features that should be considered in their modelling, the validation studies that have been performed to date and our vision on the modelling challenges that should be addressed in the near future., This work was received financial support by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through the project “SATURNO: Early warning against pluvial flooding in urban areas” (PID2020-118368RB-I00) and the project “AI4FLOOD: Enhancing Physically-based Flood Forecasting with Artificial Intelligence” (PID2023-148074OB-I00), funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE. Carlos Montalvo received funding from the FPI predoctoral grant awarded by the Spanish Ministry of Science, Innovation, and Universities (PRE2021-098425).
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

IberSWMM+: A high-performance computing solver for 2D-1D pluvial flood modelling in urban environments

  • Sañudo, Esteban
  • García-Feal, Orlando
  • Hagen, L.
  • Cea, Luis
  • Puertas, Jerónimo
  • Montalvo Montenegro, Carlos Israel
  • Alvarado-Vicencio, R.
  • Hofmann, J.
[Abstract]: Urban drainage modelling is essential for effective city planning and flood management. The increasing complexity of urban environments and the growing availability of high-resolution data have led to the need to develop more sophisticated and freely accessible urban drainage models. This paper presents the parallel implementation of Iber-SWMM, a freely distributed integrated 2D/1D urban drainage model for modelling surface and sewer flows and their interactions. Iber-SWMM constitutes an advance in the field by incorporating a fully distributed hydrological approach, advanced roof modelling tools, and GIS interoperability, offering a comprehensive solution for urban hydrodynamics. Originally designed for research in small urban drainage models due to CPU limitations, Iber-SWMM has now been enhanced with High Performance Computing (HPC) techniques. This allows for the simulation of high-resolution urban models with fine meshes comprising millions of elements, essential for accurate representation of complex urban geometries. We validated the model through laboratory-scale tests and two city-scale scenarios, providing detailed input data and demonstrating the applicability of the model in real-world situations. Our results show that the GPU-accelerated version achieves simulation speeds up to 200 times faster than the sequential version for large models. For instance, in a city-scale scenario with approximately 6 million cells, 3000 nodes, and 3000 links, simulation time was reduced from 72 h to just 20 min. To ensure result consistency and assess convergence, we conducted simulations using low, medium, and high-resolution computational meshes for each case study. Our findings indicate that both parallel and sequential versions produce consistent results, with convergence typically achieved at medium to high resolutions. Notably, we observed that for very large models, the computation of the drainage network in SWMM can become a bottleneck, suggesting an area for future optimization. By enabling the simulation of high-resolution urban models with millions of elements up to 200 times faster than sequential versions, this study bridges the gap between academic research and practical urban planning, empowering stakeholders to conduct more detailed, city-wide simulations, and ultimately contributing to faster urban flood risk management., This study received financial support from the project “DRAIN - Digital RAIN. An Integrated Urban Drainage Model” (CPP2021-008756) funded by MICIU/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” as well as from the project “SATURNO: Early warning against pluvial flooding in urban areas” (PID2020-118368RB-I00) funded by MICIU/AEI/ 10.13039/501100011033. In addition, O. García-Feal was supported by the postdoctoral fellowship “Juan de la Cierva” (ref. JDC2022-048667-I), funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. Funding for open access charge: Universidade da Coruña/CISUG., Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Sewer Network Data Completeness: Implications for Urban Pluvial Flood Modelling

  • Montalvo Montenegro, Carlos Israel
  • Tamagnone, Paolo
  • Sañudo, Esteban
  • Cea, Luis
  • Puertas, Jerónimo
  • Schumann, G.
[Abstract]: 2D/1D dual drainage models are one of the most useful tools for studying urban pluvial flooding. However, the accuracy of these models depends on data quality and completeness. This study assesses the effects of sewer network data completeness on the results of the 2D/1D free distribution model Iber-SWMM. The research is conducted in two case studies: Differdange (Luxembourg) and Osuna (Spain), considering six different return period storms. Different scenarios of data completeness were generated by simplifying the original sewer network, based on two characteristics of the conduit segments: the Strahler Order number and the length. Each scenario was evaluated by comparing the maximum flood extent maps obtained. The results indicate that the lower the degree of data completeness, the higher the overestimation of the maximum flood extent. For 80% completeness, the False Alarm Ratio is less than 0.05, but it can increase exponentially to over 0.30 when network completeness drops to 20%. However, if the available information includes the most important conduits, such as the main collectors, errors are minimal. Furthermore, if the data on surface elements (inlets) is also complete, the accuracy of flood modeling is maintained compared to the complete data scenario. These results can contribute to the simplification of flood model setup in large urban areas, where not always complete sewer network data sets are available and information preprocessing can be complex and time-consuming, and the computation of the network in SWMM can become a bottleneck in the simulation., This project has received financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) within the project “SATURNO: Early Warning Against Pluvial Flooding in Urban Areas” (PID2020-118368RB-I00), as well as from the project “AI4FLOOD: Enhancing Physically-based Flood Forecasting with Artificial Intelligence (PID2023-148074OB-I00)”. Additionally, funding was provided by the FPI predoctoral grant from the Spanish Ministry of Science, Innovation, and Universities (PRE2021-098425). The work developed by Esteban Sañudo is funded initially by the project “DRAIN – Digital RAIN. An Integrated Urban Drainage Model” (CPP2021-008756), financed by MICIU/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR, and subsequently by the Postdoctoral Fellowship Programme of the Xunta de Galicia (Consellería de Educación, Ciencia, Universidades e Formación Profesional) (Ref. ED481B-2025/090). Funding for open access charge: Universidade da Coruña/CISUG., Xunta de Galicia; ED481B-2025/090, Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Integrating Net Rainfall Calculation in Deep Learning-Based Surrogate Modeling Frameworks for 2D Flood Prediction

  • Farfán-Durán, Juan F.
  • Montalvo Montenegro, Carlos Israel
  • Cea, Luis
  • Leitão, J. P.
[Abstract]: This study proposes a novel deep learning (DL)-based surrogate model that incorporates the calculation of net rainfall using the SCS-CN method, providing a flexible framework for evaluating the influence of rainfall events under different antecedent moisture conditions (AMC). The proposed framework involves establishing a ground truth model (Iber-SWMM) and defining the necessary terrain features and rainfall patterns for training the surrogate. A benchmark surrogate model using only gross rainfall, replicating methodologies from previous studies, is also developed for comparison. The trained models are then applied to predict water depth maps using test rainfall patterns under different scenarios, both with and without net rainfall. The results demonstrate that the proposed surrogate model reduces the computational times of Iber-SWMM by 2 to 4 orders of magnitude while outperforming the benchmark surrogate in all the measures. It presents satisfactory accuracy in water depth prediction, with 80% to 95% of predictions within a -0.2 to 0.2 m error range and hit ratios between 0.87 to 0.91 in terms of flooded pixels in the more extreme events. These outcomes are comparable to those achieved by a physics-based model on one of the test events. The study also suggests future lines for refinement., This project has received financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) within the project “SATURNO: Early Warning Against Pluvial Flooding in Urban Areas” (PID2020-118368RB-I00), as well as from the project “AI4FLOOD: Enhancing Physically-based Flood Forecasting with Artificial Intelligence (PID2023-148074OB-I00)”. Additionally, funding was provided by the FPI predoctoral grant from the Spanish Ministry of Science, Innovation, and Universities (PRE2021-098425). Funding for open access charge: Universidade da Coruña/CISUG., Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG
RUC. Repositorio da Universidade da Coruña
Publicación Tesis doctoral (DoctoralThesis)

Improving the Capabilities of 2d Shallow Water Models for Hydrological Applications

  • García-Alén, Gonzalo
Tese por compendio de publicacións, [Abstract] The adoption of fully distributed models, especially those based on the 2D shallow water equations (2D-SWE), is becoming a common approach in rainfall-runoff simulations at the basin scale. These models have a great potential since they effectively capture the interactions of hydrological processes and their spatial variability. However, their use in practical applications is limited due to the substantial computational resources they necessitate for numerical solving, owing to their greater complexity, and the lack of well-established calculation methodologies. The objective of this thesis is to enhance the capabilities of hydrological models based on the 2D shallow water equations by optimizing the calculation and calibration processes, and validating their calculation methodology. Using Iber as a recognized 2D-SWE model, this research concluded a mesh resolution threshold from which the model provides comparable outflow results, validated the accurate representation of anthropogenic alterations of the river channel, and successfully employed two data assimilation approaches, even creating a new framework for parameter calibration. The findings presented hold significant applicability and potential for transfer to other 2D-SWE models., [Resumen] La adopción de modelos distribuidos, especialmente aquellos basados en las ecuaciones de aguas someras 2D (2D-SWE), está convirtiéndose en una práctica común para simular la transformación lluvia-escorrentía a escala de cuenca. Estos modelos tienen un gran potencial al capturar de manera efectiva las interacciones de procesos hidrológicos y su variabilidad espacial. Sin embargo, su uso en aplicaciones prácticas queda limitado por el coste computacional derivado de su complejidad y la falta de metodologías de cálculo bien establecidas. El objetivo de esta tesis es mejorar los modelos hidrológicos basados en las ecuaciones de aguas someras 2D, optimizando procesos de cálculo y calibración, y validando la metodología de cálculo. Utilizando Iber como modelo de referencia, esta investigación estableció un umbral de resolución de malla a partir del cual se obtienen resultados análogos de caudal de salida, validó la precisión en la representación numérica de alteraciones antropogénicas y aplicó con éxito dos enfoques de asimilación de datos, incluso desarrollando una herramienta para la calibración de parámetros. Los hallazgos presentados tienen una gran aplicabilidad y potencial para ser incorporados a otros modelos 2D-SWE., [Resumo] A adopción de modelos distribuídos, especialmente aqueles baseados nas ecuacións de augas superficiais 2D (2D-SWE), está a se converter nunha práctica común para simular a transformación choiva-escorredura a escala de conca. Estes modelos teñen un gran potencial ao capturar de maneira efectiva as interaccións de procesos hidrolóxicos e a súa variabilidade espacial. Con todo, o seu uso en aplicacións prácticas queda limitado polo custo de computación derivado da súa complexidade e a falta de metodoloxías de cálculo ben establecidas. O obxectivo desta tese é mellorar os modelos hidrolóxicos baseados nas ecuacións de augas superficiais 2D, optimizando procesos de cálculo e calibración, e validando a metodoloxía de cálculo. Utilizando Iber como modelo de referencia, esta investigación estableceu un limiar de resolución de malla a partir do cal se obteñen resultados análogos de caudal de saída, validou a precisión na representación numérica de alteracións antropoxénicas e aplicou con éxito dous enfoques de asimilación de datos, incluso desenvolvendo unha ferramenta para a calibración de parámetros. Os achados presentados teñen unha gran aplicabilidade e potencial para ser incorporados a outros modelos 2D-SWE., El desarrollo de este trabajo ha sido posible gracias al proyecto Interreg Atlantic Area AAFLOODS (EAPA_45/2018_AA-FLOODS), y los proyectos VAMONOS (CTM2017-85171-C2-2-R) y SATURNO (PID2020-118368RB-I00), ambos financiados por el Ministerio de Ciencia e Innovación. El haber colaborado en estos y otros proyectos me ha permitido conocer la aplicación real de mis modelos, y me ha dado la oportunidad de colaborar con personas de todos los continentes. Quiero destacar en particular el equipo de trabajo del AAFLOODS, coordinado por Miguel Gil y Carmen Jaén, en donde la línea entre lo profesional y lo personal acabó por difuminarse gracias al excepcional ambiente generado. Por otra parte, me gustaría expresar mi agradecimiento a Renaud Hostache por toda la dedicación brindada durante mis estancias de investigación en Luxemburgo y Montpellier. Ambas fueron posibles gracias a la financiación de las ayudas para estancias predoctorales INDITEX-UDC 2021 y 2022. De ellas guardo con cariño la acogida y el trato recibido tanto por mis compañeros del LIST, como de la Maison de la Télédétection., Interreg Atlantic Area; EAPA_45/2018_AA-FLOODS
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Strategies for modelling roofs on large-scale urban drainage models focusing on incomplete data scenarios

  • Montalvo Montenegro, Carlos Israel
  • Sañudo, Esteban
  • Cea, Luis
  • Chen, Albert S.
  • Puertas, Jerónimo
  • Evans, Barry
[Abstract:] Impermeable surfaces such as roofs play a key role in urban pluvial floods due to the rapid transfer of rainfall to drainage networks, contributing to system overloading. This study proposes and evaluates different modelling strategies within large-scale urban drainage models, exploring simplified approaches for roof geometry and roof-to-manhole connections. The results indicate that, regardless of the methodology used to estimate roof width, the differences become negligible if the discharge point is distant. Additionally, for a contributing area of roofs discharging upstream to a manhole, the method of roof-to-manhole connection does not have a significant influence, which demonstrates the potential of these strategies to streamline the modelling process without compromising the reliability of the simulations. The findings highlight the feasibility of applying these modelling strategies in situations where data completeness is not feasible, offering a balanced solution between model complexity and accuracy., This project has received financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) within the project “SATURNO: Early warning against pluvial flooding in urban areas” (PID2020-118368RB-I00) and the FPI predoctoral grant from the Spanish Ministry of Science, Innovation, and Universities (PRE2021-098425). The contract of Esteban Sañudo is funded by the project “DRAIN - Digital RAIN. An Integrated Urban Drainage Model” (CPP2021-008756) funded by MICIU/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and the author also acknowledges the support of the INDITEX-UDC 2021 and 2022 Predoctoral Grants.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Urban pluvial flood modelling in the absence of sewer drainage network data: a physics-based approach

  • Montalvo Montenegro, Carlos Israel
  • Reyes-Silva, Julián David
  • Sañudo, Esteban
  • Cea, Luis
  • Puertas, Jerónimo
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract:] 1D/2D dual drainage models have become one of the most useful tools in the study of urban pluvial floods. However, such models require information about the sewer network that is not always readily available. In this study we present a physics-based approach for assessing urban pluvial floods, with the aim of overcoming the common situation of having limited information on the sewer system. The method proposed involves the use of available open-access information within a virtual sewer network generation tool. This realistic approach allows for the implementation of 1D/2D dual drainage models, such as the recently developed Iber-SWMM model. Results obtained from four storm events using a virtual sewer network in Iber-SWMM were compared with those derived using data from the actual sewer network in a coastal town located in NW Spain. These results revealed that the proposed approach can reasonably represent the sewer network's drainage capacity during pluvial floods, especially compared to other simplified approaches, like the rainfall reduction method. The proposed approach also accounts for the sewer network transport capacity and the impact of overflows when a sewer’s capacity is exceeded. Hence the study confirms the significant effect of these processes on the magnitude of pluvial flooding in urban areas. The methodology is shown to be robust, and can be applied to any urban settlement in which no proper record of the sewer network is available., This project has received financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) within the project “SATURNO: Early warning against pluvial flooding in urban areas” (PID2020-118368RB-I00) and the FPI predoctoral grant from the Spanish Ministry of Science, Innovation, and Universities (PRE2021-098425). Funding for open access charge: Universidade da Coruña/CISUG.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Large-scale physical facility and experimental dataset for the validation of urban drainage models

  • Sañudo, Esteban
  • Cea, Luis
  • Puertas, Jerónimo
  • Naves, Juan
  • Anta, Jose
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract:] Numerical models are currently the main tool used to simulate the effects of urban flooding. The validation of these models requires thorough and accurate observed data in order to test their performance. The current study presents a series of laboratory experiments in a large-scale urban drainage physical facility of approximately 100 m2 that includes roofs, streets, inlets, manholes and sewers. The facility is equipped with a rainfall simulator as well as a surface runoff and pipe inflows generators. The experiments were divided in two sets. In Set 1 the surface runoff was generated exclusively by the rainfall input, while in Set 2 the rainfall simulator was used in combination with the runoff generators. In all the tests the water discharge was measured at points on the inlets, roofs, and outfall. The water depth at different locations of the facility was also measured. The experimental tests were replicated numerically using the urban drainage model Iber-SWMM. Experimental results show that, even in a relatively small catchment the peaks in the hydrographs generated at each element of the facility during intermittent rainfalls are significantly attenuated at the catchment outlet. The agreement between the experimental and numerical results show that there are some differences in the hydrographs generated at each element, but that these differences compensate each other and disappear at the outfall. The results generated provide the research community with a thorough and high-resolution dataset obtained under controlled laboratory conditions in a large-scale urban drainage facility, something which has not previously been available., This study was received financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) within the project “SATURNO: Early warning against pluvial flooding in urban areas” (PID2020-118368RB-I00) as well as from the project POREDRAIN (RTI2018-094217-B-C33) funded from the Spanish Ministry of Science and Innovation, Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (ERDF). The urban drainage facility was financed with the grant EQC2019-006507-P funded by MCIN/AEI/10.13039/501100011033 and ERDF “A Way of making Europe”. Funding for open access charge: Universidade da Coruña/CISUG. The authors would also like to acknowledge the support of Gabriela Vila, Gonzalo García-Alén and the staff of the CITEEC during the experiments, as well as subsequent discussions with Manuel Regueiro-Picallo.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Extension of 2D shallow water models to hydrological modelling

  • Cea, Luis
  • Bladé i Castellet, Ernest|||0000-0003-1770-3960
  • García Feal, Orlando
  • Sanz Ramos, Marcos|||0000-0003-2534-0039
  • Gómez Gesteira, Moncho
  • Farfán Durán, Juan Fernando
In this paper we discuss some critical aspects that should be considered in order to extend and apply a numerical model based on the 2D shallow water equations(2D-SWE) to distributed hydrological modelling. We also detail the physical processes, numerical methods and High Performance Computing(HPC) techniques that have been implemented in the freely available software Iber, to enable its application to rainfall-runoff transformation and propagation at the catchment scale.The original version of Iber is coded in Fortran and it implements an unstructured finite volume solver for the 2D depth-averaged shallowwater equations to model open channel flow in rivers and is therefore representative of many 2D free surface flow models. Hydrological processes as infiltration, evapotranspiration, percolation and groundwater flow were implemented in the last version of the software. Specific numerical schemes for the discretization of the 2D-SWE in surface runoff applications were also included in the solver. A HPC version of the solver (Iber+) coded in C++ and parallelized for CPU using OpenMP and for GPU using Nvidia CUDA was also developed. After describing briefly those implementations, we present the validation of the model in two laboratory configurations, and its application to three real catchments., Part of the work presented in this paper was supported by the Spanish Ministry of Science and Innovation (Ministerio de Ciencia e Innovacion) within the project “SATURNO: Early warning against pluvial flooding in urban areas” (grant number PID2020-118368RB-I00).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Extension of 2D shallow water models to hydrological modelling

  • Cea, Luis
  • Bladé i Castellet, Ernest
  • García Feal, Orlando
  • Sanz Ramos, Marcos
  • Gómez Gesteira, Moncho
  • Farfán Durán, Juan Fernando
In this paper we discuss some critical aspects that should be considered in order to extend and apply a numerical model based on the 2D shallow water equations(2D-SWE) to distributed hydrological modelling. We also detail the physical processes, numerical methods and High Performance Computing(HPC) techniques that have been implemented in the freely available software Iber, to enable its application to rainfall-runoff transformation and propagation at the catchment scale.The original version of Iber is coded in Fortran and it implements an unstructured finite volume solver for the 2D depth-averaged shallowwater equations to model open channel flow in rivers and is therefore representative of many 2D free surface flow models. Hydrological processes as infiltration, evapotranspiration, percolation and groundwater flow were implemented in the last version of the software. Specific numerical schemes for the discretization of the 2D-SWE in surface runoff applications were also included in the solver. A HPC version of the solver (Iber+) coded in C++ and parallelized for CPU using OpenMP and for GPU using Nvidia CUDA was also developed. After describing briefly those implementations, we present the validation of the model in two laboratory configurations, and its application to three real catchments., Part of the work presented in this paper was supported by the Spanish Ministry of Science and Innovation (Ministerio de Ciencia e Innovacion) within the project “SATURNO: Early warning against pluvial flooding in urban areas” (grant number PID2020-118368RB-I00)., Postprint (published version)