Pasar al contenido principal

PROCESOS CATALITICOS SOSTENIBLES PARA LA TRANSFORMACION DE RESIDUOS LIGNOCELULOSICOS EN MONOMEROS RELEVANTES PARA LA INDUSTRIA DE POLIMEROS

PID2021-122736OB-C42

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE MALAGA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of a two-step water:methyl isobutyl ketone:ethanol biphasic system in the production of 5-ethoxymethylfurfural from glucose

  • Torres-Olea, Benjamín
  • Rodríguez-Carballo, Gabriela
  • Moreno Tost, Ramón
  • Cecilia, Juan Antonio
  • García-Sancho, Cristina
  • Maireles-Torres, Pedro
  • Domine, Marcelo Eduardo
[EN] In this work, the use of glucose as feedstock to produce the biofuel 5-ethoxymethylfurfural (EMF) is explored using a two-step system. The first step is optimized for the dehydration of glucose into 5-hydroxymethylfurfural (HMF) using water:methyl isobutyl ketone (MIBK) and water:MIBK:ethanol biphasic systems, with the addition of CaCl2 and Beta-zeolites as catalysts for glucose dehydration. After optimization, up to a 61 % HMF yield is obtained after 30 min at 180 degrees C. Most of the HMF generated is extracted to the organic phase due to a high partition coefficient. This phase was used in a second step, by simple separation from the aqueous phase, with fresh catalyst. In the absence of water, the ethanol present with MIBK in the organic phase is enough to etherify the HMF to produce our desired biofuel. Etherification took place with a 67 % selectivity after 3 h at 140 degrees C. The yield of HMF could be improved this way respect to a one-step reaction, and a final EMF yield of 37 % EMF yield from glucose was achieved., This research was funded by SPANISH MINISTRY OF SCIENCE AND INNOVATION (PID2021-122736OB-C42) , FEDER (European Union) funds (PID2021-122736OB-C42, UMA20-FEDERJA88) Benjamin Torres Olea thanks the financial support provided by MINISTRY OF UNIVER-SITIES for his predoctoral contract (FPU20-02334) . Moreover, authors want to thank the funding for open access charge to Universidad de Malaga/CBUA.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and Catalytic Activity of Cu-Co/CeO2 Catalysts in the Hydrogenation of Furfural to Pentanediols

  • Maderuelo Solera, Rocío
  • Cecilia, Juan Antonio
  • Vila, Francisco
  • Mariscal López, Rafael
  • Maireles-Torres, Pedro
  • Moreno‐Tost, Ramón
This study presents a comprehensive characterization of monometallic (Co or Cu) and bimetallic (Co-Cu) catalysts supported on cerium oxide (CeO2). XRD and TEM analyses revealed that crystallinity decreases after reduction and that metal dispersion is highly dependent on composition, with cobalt exhibiting greater dispersion than copper. The results confirmed a strong interaction between the metals and CeO2, which alters the ceria structure and facilitates the reduction of the metal oxides. H2-TPR and XPS data indicated that monometallic and the bimetallic 15Cu15Co catalysts achieved nearly complete reduction, whereas other bimetallic catalysts did not. Furthermore, CO chemisorption and H2-TPD demonstrated that the hydrogen activation capacity correlates with the degree of catalyst reduction. Notably, bimetallic catalysts did not show enhanced hydrogen activation compared to their monometallic counterparts. This suggests that the dispersion and metal–support interaction are more critical factors for catalytic activity in this system than the formation of metal alloys. Although the furfural conversion was complete, the selectivity depended greatly on the catalyst composition. The 30Co_R catalyst was most selective for 1,5-pentanediol (38.4%), the 30Cu_R catalyst for 1,2-pentanediol (22.1%), and the bimetallic catalysts for THFA. Reutilising the 30Co_R catalyst after five catalytic cycles resulted in a gradual reduction in the selectivity of 1,5-pentanediol., This research was funded by Spanish Ministry of Science and Innovation (PID2021–122736OB-C42) and FEDER (European Union) funds (PID2021–122736OB-C42, UMA20-FEDERJA88)., Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Nitrogen doped carbon dots as a photocatalyst based on biomass: a life cycle assessment

  • Rodríguez-Carballo, Gabriela
  • Moreno-Tost, Ramón
  • Fernandes, Sónia
  • Esteves da Silva, Joaquim C.G.
  • Pinto da Silva, Luís
  • Castro Galiano, Eulogio
  • Algarra González, Manuel
The effectiveness of various transition metal phosphate-based acid catalysts, including vanadium and niobium, in the hydrothermal synthesis of carbon dots (CDs), has been assessed. Two sources of carbohydrates were employed for this: commercial xylose and liquor of xylose produced by processing olive pits. Catalysts were identified using the NH3-TPD, DTA/TG, XRD, and XPS techniques. The reaction was conducted for 4 h at a temperature of 180 °C. The existence of such nanoparticles, regardless of the carbohydrate source, was confirmed by an analysis of the features and characteristics of CDs nanoparticles. N-doped CDs with increased fluorescence were also created at the same time using a similar hydrothermal technique, and their photocatalytic activity was investigated. A Life Cycle Assessment (LCA) was conducted for both syntheses with the goal of comparing the environmental effects of the synthesis from commercial xylose to the synthesis from biomass. It was revealed that, although energy is the primary driver of both synthesis pathways' effect categories, the fundamental variations that seem to determine their relative sustainability are connected to the nature of the carbon precursor. Regarding the latter, it is determined that electricity has the greatest environmental impact., This research was funded by the Spanish Ministry of Science and Innovation (PID2021- 122736OB-C42), FEDER (European Union) funds (PID2021-122736OB-C42, P20-00375, UMA20- FEDERJA88). M.A thanks to the Spanish Ministry of Science and Innovation (MCIN/AEI/ 10.13039/501100011033) through project PID2021-122613OB-I00. This work was made in the framework of projects UIDB/00081/2020 (CIQUP), UIDB/05748/2020 (GreenUPorto), LA/P/00081/2020 (IMS), and PTDC/QUI-QFI/2870/2020, funded by the Portuguese Foundation for Science and Technology (FCT, Lisbon). Luís Pinto da Silva acknowledges funding from FCT under the Scientific Employment Stimulus (CEECINST/00069/2021), while S.F acknowledges FCT for funding of her Ph.D. grant (2021. 05479.BD).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

One-pot synthesis of green-emitting nitrogen-doped carbon dots from xylose

  • Rodríguez-Carballo, Gabriela
  • García-Sancho, Cristina
  • Algarra González, Manuel
  • Castro, Eulogio
  • Moreno-Tost, Ramón
Carbon dots (CDs) are interesting carbon nanomaterials that exhibit great photoluminescent features, low cytotoxicity, and excellent water stability and solubility. For these reasons, many fields are starting to integrate their use for a variety of purposes. The catalytic performance of VOPO4 has been evaluated in the synthesis of nitrogen-doped carbon dots (N-CDs). The synthesis reaction was carried out at 180 °C using VOPO4 as a heterogeneous catalyst for 2 to 4 h of reaction time. After reaction, the N-CDs were purified using a novel method for the protection of the functional groups over the surfaces of the N-CDs. The morphological, superficial, and photoelectronic properties of the N-CDs were thoroughly studied by means of TEM, HRTEM, XPS, and photoluminescence measurements. The conversion of the carbon precursor was followed by HPLC. After three catalytic runs, the catalyst was still active while ensuring the quality of the N-CDs obtained. After the third cycle, the catalyst was regenerated, and it recovered its full activity. The obtained N-CDs showed a great degree of oxidized groups in their surfaces that translated into high photoluminescence when irradiated under different lasers. Due to the observed photoelectronic properties, they were then assayed in the photocatalytic degradation of methyl orange., This research was funded by the Spanish Ministry of Science and Innovation (PID2021-122736OB-C42, PID2021-122613OB-I00) and FEDER (European Union) funds (PID2021-122736OB-C42, P20-00375, UMA20-FEDERJA88).