Pasar al contenido principal

MAS ALLA DE ATHENA: AMPLIACION DE LAS PERSPECTIVAS DE APLICACION DE LOS TES

PID2021-122955OB-C42

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the physical origin of the superconducting transition in transition-edge sensors

  • Fàbrega, Lourdes
  • Camón, Agustín
  • Pobes, Carlos
  • Štrichovanec, Pavel
The data that support these findings are available from the corresponding author upon reasonable request., Transition-Edge Sensors (TESs) constitute highly sensitive particle and radiation detectors, widely used in many applications. Each of these requires optimization of TES performances and designs, including sizes and geometries. These may have implications on the superconducting transition mechanisms and, therefore, on TESs performances and stability, through the specific shape of the resistance vs temperature and current R(T,I) and the nature of noise. In this study, we investigate the dependence of the superconducting transition, characterized by R(T,I), on TES size and bias current density. Through analyses of R(T,I) in bare Mo/Au TESs with Tc tuned for this study, we observe how the weak link behavior induced by the superconducting leads weakens and disappears as TES length or driving current increase, being substituted by another dominant transition mechanism, which might be related to a Berezinskii–Kosterlitz–Thouless transition. We also observe a significant broadening of the transition's upper part, attributed to the longitudinal proximity effect induced by the pads; for the shorter devices, this effect is observed for R > 70% Rn and results in TES resistances considerably lower than Rn up to temperatures well above the TES transition: R < Rn up to 3 K for a 8 μm-long device., This work has been carried out with financial support from the European Union's Horizon 2020 Research and Innovation Programme under Grant Agreement No. 871158 (Project AHEAD2020) and from the Spanish Ministerio de Ciencia e Innovación MICINN (Project PID2021-122955OB-C42). L.F. acknowledges also Spanish MICINN for support through the Severo Ochoa Programme for Centres of Excellence (Project FUNFUTURE, CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of cryogenic X-ray detectors based on Mo/Au TES

  • Camón, Agustín
  • Fàbrega, Lourdes
  • Pobes, Carlos
  • Strichovanec, Pavel
  • Bolea, Juan
  • Rico-Camacho, J. I.
  • Garcia-Palacios, J.-L.
The data that support these findings are available from the corresponding author upon reasonable request., Transition edge sensors (TESs) have emerged as highly sensitive radiation detectors with applications ranging from astrophysics to materials science. In the framework of the Athena X-ray space telescope, we have developed Mo/Au-based TES devices designed to meet the ESA specifications for the X-IFU instrument. The detectors were fabricated using a Mo/Au/Au trilayer process and characterized in a dilution refrigerator using a SQUID readout. From I to V curves and complex impedance measurements, we extracted the electrothermal parameters of the TES, which are consistent with theoretical models. Noise spectra were analyzed to estimate the energy resolution, and an excess noise factor was obtained from the comparison of theoretical and experimental data. A spectral resolution below 4 eV was achieved for 5.9 keV X-rays from a 55Fe source., The Spanish ”Ministerio de Ciencia, Innovación y Universidades” supports and funds this works, MICIU/AEI/https://doi.org/10.13039/501100011033 under Grants No. PID2021-122955OB-C42 (also funded by FEDER, UE), No. PID2024-155779OB-C32, No. CEX2023-001286-S (Severo Ochoa Centers of Excellence). We also acknowledge the Aragón Regional Government through project QMAD (E09 23R). LF acknowledges also Spanish MICINN for support through the Severo Ochoa Programme for Centres of Excellence (project MATRANS42, CEX2023-001263-S). We also acknowledge PTB (Berlin) for providing us with excellent SQUIDs, and Jörn Beyer for his valuable help and advice., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mo/Au transition-edge sensors: Effect of sensor size and absorber stem position on parameters and noise

  • Fàbrega, Lourdes
  • Camón, Agustín
  • Pobes, Carlos
  • Strichovanec, Pavel
  • Bolea, Juan
The basic transition parameters and excess noise of Mo/Au-based transition-edge sensor (TES) x-ray detectors without banks and with Au absorber are analyzed as a function of TES dimensions and absorber stems position. We show the effect of the absorber stems and TES dimensions on these parameters. We observe that the logarithmic derivatives of R(T) are reduced and develop non-monotonous behavior vs bias as stems are placed on the Mo/Au sensor area, progressively disturbing the current flow inside the TES. TESs with outer tangent stems display higher excess noise but also higher figures of merit because of their higher α and β values. We find that both longer and narrower TESs have higher excess noise so that a trade-off is required for TES performance optimization. We discuss some hints for that. The possible origins of the experimental excess noise of these devices are also explored and discussed., The Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) supports and funds this work, under Grant PID2021-122955OB-C42 (also funded by FEDER, UE), and Grants for Severo Ochoa Centers of Excellence CEX2023-001263-S and CEX2023-001286-S. We also acknowledge the Catalan Government through Grant 2021-SGR-00445 and the Aragón Regional Government through project QMAD (E09 23R)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silicon ion irradiation for advanced control of superconductivity in tungsten ultrathin films

  • Pepe, Carlo
  • Camón, Agustín
  • Rius, Gemma
Superconducting thin films are fundamental for the advancement of quantum technologies in applications such as quantum sensing, metrology, or computing. This work demonstrates precise control over the superconducting properties of tungsten thin films deposited by standard sputtering techniques resulting from silicon ion irradiation (WSix). By varying the ion fluences, we are able to systematically modify crucial parameters such as critical temperature (TC) and room temperature resistivity. The possibility of tuning them within a single thin film metal layer anticipates that distinct functions, like wiring or active areas of sensor devices, could be selectively engineered. We report structural and functional characterizations that reveal improved morphological uniformity, atomic composition control, or robust modification of electronic properties. Also relevant, the ultrathin WSix films maintain the absence of thermal hysteresis even in a very low temperature range or the ease in conventional direct probing by wire bonding. These findings support the technological approach as a scalable and versatile methodology for fabricating integrated superconducting circuits with locally-tailored characteristics, crucial for next-generation quantum sensors and processors., This work was supported in part by María de Maeztu Units of Excellence programme under Grant CEX2023-001397-M and in part by Ministerio de Ciencia, Innovación y Universidades under Grant CNS2023-145234, Grant PID2021-122140NB-C32, Grant TED2021-130292B-C44, Grant PID2021-122955OBC42, Grant QTP2021-03-014, Grant PID2024-155779OB-C32, and Grant CEX2023-001286-S., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001397-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the physical origin of the superconducting transition in transition-edge sensors

  • Fàbrega, Lourdes
  • Camón, Agustín
  • Pobes, Carlos
  • Strichovanec, Pavel
Transition-Edge Sensors (TESs) constitute highly sensitive particle and radiation detectors, widely used in many applications. Each of these requires optimization of TES performances and designs, including sizes and geometries. These may have implications on the superconducting transition mechanisms and, therefore, on TESs performances and stability, through the specific shape of the resistance vs temperature and current R(T,I) and the nature of noise. In this study, we investigate the dependence of the superconducting transition, characterized by R(T,I), on TES size and bias current density. Through analyses of R(T,I) in bare Mo/Au TESs with Tc tuned for this study, we observe how the weak link behavior induced by the superconducting leads weakens and disappears as TES length or driving current increase, being substituted by another dominant transition mechanism, which might be related to a Berezinskii–Kosterlitz–Thouless transition. We also observe a significant broadening of the transition's upper part, attributed to the longitudinal proximity effect induced by the pads; for the shorter devices, this effect is observed for R > 70% Rn and results in TES resistances considerably lower than Rn up to temperatures well above the TES transition: R < Rn up to 3 K for a 8 μm-long device.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development of Cryogenic X-Ray Detectors Based on Mo/Au TES

  • Camón, A.
  • Fàbrega, L.
  • Pobes, C.
  • Strichovanec, P.
  • Bolea, J.
  • Rico-Camacho, J. I.
  • García-Palacios, J. L.
Transition edge sensors (TESs) have emerged as highly sensitive radiation detectors with applications ranging from astrophysics to materials science. In the framework of the Athena X-ray space telescope, we have developed Mo/Au-based TES devices designed to meet the ESA specifications for the X-IFU instrument. The detectors were fabricated using a Mo/Au/Au trilayer process and characterized in a dilution refrigerator using a SQUID readout. From I to V curves and complex impedance measurements, we extracted the electrothermal parameters of the TES, which are consistent with theoretical models. Noise spectra were analyzed to estimate the energy resolution, and an excess noise factor was obtained from the comparison of theoretical and experimental data. A spectral resolution below 4 eV was achieved for 5.9 keV X-rays from a 55 Fe source.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mo/Au transition-edge sensors: Effect of sensor size and absorber stem position on parameters and noise

  • Fàbrega, Lourdes
  • Camón, Agustín
  • Pobes, Carlos
  • Strichovanec, Pavel
  • Bolea, J.
The basic transition parameters and excess noise of Mo/Au-based transition-edge sensor (TES) x-ray detectors without banks and with Au absorber are analyzed as a function of TES dimensions and absorber stems position. We show the effect of the absorber stems and TES dimensions on these parameters. We observe that the logarithmic derivatives of R(T) are reduced and develop non-monotonous behavior vs bias as stems are placed on the Mo/Au sensor area, progressively disturbing the current flow inside the TES. TESs with outer tangent stems display higher excess noise but also higher figures of merit because of their higher α and β values. We find that both longer and narrower TESs have higher excess noise so that a trade-off is required for TES performance optimization. We discuss some hints for that. The possible origins of the experimental excess noise of these devices are also explored and discussed.